RESUMEN
Atmospheric water harvesting (AWH) technology is a new strategy for alleviating freshwater scarcity. Adsorbent materials with high hygroscopicity and high photothermal conversion efficiency are the key to AWH technology. Hence, in this study, a simple and large-scale preparation for a hygroscopic compound of polyurethane (PU) sponge-grafted calcium alginate (CA) with carbon ink (SCAC) was developed. The PU sponge in the SCAC aerogel acts as a substrate, CA as a moisture adsorber, and carbon ink as a light adsorber. The SCAC aerogel exhibits excellent water absorption of 0.555-1.40 g·g-1 within a wide range of relative humidity (40-80%) at 25 °C. The SCAC aerogel could release adsorbed water driven by solar energy, and more than 92.17% of the adsorbed water could be rapidly released over a wide solar intensity range of 1.0-2.0 sun. In an outdoor experiment, 57.517 g of SCAC was able to collect 32.8 g of clean water in 6 h, and the water quality meets the drinking water standards set by the World Health Organization. This study suggests a new approach to design promising AWH materials and infers the potential practical application of SCAC aerogel-based adsorbents.
RESUMEN
In this research, the effects of peracetic acid (PAA), polymeric flocculants, and their combined conditioning on improving the dewatering performance were comprehensively evaluated. The results showed that sludge cake moisture content, capillary suction time (CST), and specific resistance to filtration (SRF) were 70.6%, 48.1 s, and 3.42 × 1012 m/kg after adding 0.10 g/gMLSS PAA for 50 min, representing reductions of 12.60%, 40.32%, and 33.98%, respectively. Additionally, conditioning of sludge with polyferric sulfate (PFS), polyaluminum chloride (PAC), and cationic polyacrylamide (CPAM) enhanced sludge properties in the following order: CPAM > PAC > PFS. After the PAA oxidation and re-flocculation process, the optimal dosages of PFS, PAC, and CPAM were reduced to 1.5 g/L, 0.9 g/L, and 0.04 g/L, respectively. The sludge dewatering performance significantly improved, with sludge cake moisture content measuring 65.8%, 66.3%, and 61.7%, respectively. Moreover, the spatial multi-porous skeleton structures were formed via re-flocculation to improve the sludge dewatering. Furthermore, economic evaluation validated that the pre-oxidation and re-flocculation process could be considered an economically viable option. These research findings could serve as a valuable reference for practical engineering applications.
Asunto(s)
Floculación , Ácido Peracético , Aguas del Alcantarillado , Aguas del Alcantarillado/química , Ácido Peracético/química , Oxidación-Reducción , Polímeros/química , Filtración , Eliminación de Residuos Líquidos/métodos , Porosidad , Resinas Acrílicas/químicaRESUMEN
Nanoscale zerovalent iron synthesized using borohydride (B-NZVI) has been widely applied in environmental remediation in recent decades. However, the contribution of boron in enhancing the inherent reactivity of B-NZVI and its effectiveness in removing hexavalent chromium [Cr(VI)] have not been well recognized and quantified. To the best of our knowledge, herein, a core-shell structure of B-NZVI featuring an Fe-B alloy shell beneath the iron oxide shell is demonstrated for the first time. Alloyed boron can reduce H+, contributing to more than 35.6% of H2 generation during acid digestion of B-NZVIs. In addition, alloyed B provides electrons for Fe3+ reduction during Cr(VI) removal, preventing in situ passivation of the reactive particle surface. Meanwhile, the amorphous oxide shell of B-NZVI exhibits an increased defect density, promoting the release of Fe2+ outside the shell to reduce Cr(VI), forming layer-structured precipitates and intense Fe-O bonds. Consequently, the surface-area-normalized capacity and surface reaction rate of B-NZVI are 6.5 and 6.9 times higher than those of crystalline NZVI, respectively. This study reveals the importance of alloyed B in Cr(VI) removal using B-NZVI and presents a comprehensive approach for investigating electron pathways and mechanisms involved in B-NZVIs for contaminant removal.
Asunto(s)
Borohidruros , Boro , Hierro , Hierro/química , Borohidruros/química , Boro/química , Cromo/química , Electrones , Aleaciones/químicaRESUMEN
Microplastics have emerged as a concerning contaminant in drinking water sources, potentially interacting with pathogenic microorganisms and affecting the disinfection processes. In this study, MS2 was selected as an alternative for the human enteric virus. The influence of microplastics polyvinylchloride (MPs-PVC) on ultraviolet light emitting diode (UV-LED) inactivation of MS2 was investigated under various water chemistry conditions, such as MPs-PVC concentration, pH, salinity, and humic acid concentration. The results revealed that higher concentrations of MPs-PVC led to the reduced inactivation of MS2 by decreased UV transmittance, hindering the disinfection process. Additionally, the inactivation efficiency of MS2 in the presence of MPs-PVC was influenced by pH, and acidic solution (pH at 4, 5, and 6) exhibited higher efficiency compared to alkaline solution (pH at 8 and 9) and neutral solution (pH at 7). The low Na+ concentrations (0-50 mM) had a noticeable effect on MS2 inaction efficiency in the presence of MPs-PVC, while the addition of Ca2+ posed an insignificant effect due to the preferential interaction with MPs-PVC. Furthermore, the inactivation rate of MS2 initially increased and then decreased with increasing the concentration of humic acid, which was significantly different without MPs-PVC. These findings shed light on the complex interactions between MPs-PVC and MS2 in the UV-LED disinfection process under various water-quality parameters, contributing to drinking water safety and treatment.
Asunto(s)
Agua Potable , Microplásticos , Humanos , Plásticos , Levivirus , Rayos Ultravioleta , Sustancias Húmicas , Cloruro de PoliviniloRESUMEN
Sodium percarbonate (SPC) concentration can be determined spectrophotometrically by using N, N-diethyl-p-phenylenediamine (DPD) as an indicator for the first time. The ultraviolet-visible spectrophotometry absorbance of DPDâ¢+ measured at 551 nm was used to indicate SPC concentration. The method had good linearity (R2 = 0.9995) under the optimized experimental conditions (pH value = 3.50, DPD = 4 mM, Fe2+ = 0.5 mM, and t = 4 min) when the concentration of SPC was in the range of 0-50 µM. The blank spiked recovery of SPC was 95-105%. The detection limit and quantitative limit were 0.7-1.0 µM and 2.5-3.3 µM, respectively. The absorbance values of DPDâ¢+ remained stable within 4-20 min. The method was tolerant to natural water matrix and low concentration of hydroxylamine (<0.8 mM). The reaction stoichiometric efficiency of SPC-based advanced oxidation processes in the degradation of ibuprofen was assessed by the utilization rate of SPC. The DPD and the wastewater from the reaction were non-toxic to Escherichia coli. Therefore, the novel Fe2+/SPC-DPD spectrophotometry proposed in this work can be used for accurate and safe measurement of SPC in water.
Asunto(s)
Ibuprofeno , Contaminantes Químicos del Agua , Contaminantes Químicos del Agua/química , Carbonatos/química , Oxidación-Reducción , Agua , Espectrofotometría/métodosRESUMEN
Invited for this month's cover, the researchers from Huaqiao University and Jilin Jianzhu University. The Cover image shows the use of spent graphite to prepare hydrogels for photothermal evaporation to produce clean water. The Research Article itself is available at 10.1002/cssc.202300845.
RESUMEN
Excessive phosphorus in water would cause eutrophication and deterioration of the ecological environment. Herein, the La-MOFs/Al2O3 composite was successfully prepared by the in situ hydrothermal synthesis method for granulation, which was conducive to exerting the phosphate adsorption capacity and facilitating practical application. The materials were characterized by SEM, EDX, XRD, BET, FTIR, and Zeta. In addition, the adsorption performance of La-MOFs/Al2O3 was evaluated through adsorption kinetics and isotherms, showing that the Langmuir adsorption capacity was 16.34 mgP·g-1 (25 °C) and increased with the water temperature. Moreover, the batch influence experiments of intimal pH, adsorbent dosage, coexisting ions, and stability tests were performed to analyze the potential for practical applications and verified through the natural micro-polluted water samples from Houxi River and Bailu Lake (China). The results indicated that the La-MOFs/Al2O3 was suited to a wide pH range of 4 to 10 and the phosphate removal efficiency remained above 70% after continuous use for four times, exhibiting excellent stability. It also had excellent selectivity in the presence of SO42-, Cl-, NO3-, and HCO3-, only decreased to 70.24% at high HCO3- ion concentration of 60 mg/L, respectively. And the La-MOFs/Al2O3 had excellent adsorption of total phosphorus, phosphate, and organic phosphorus in the actual river and lake water and completely removed dissolved phosphorus. Finally, a phosphate adsorption mechanism model involved in electrostatic interaction and ligand exchange was proposed. Therefore, La-MOFs/Al2O3 could be considered to be an excellent phosphorus adsorbent for application in the actual water environmental remediation.
Asunto(s)
Fosfatos , Contaminantes Químicos del Agua , Agua/química , Lantano/química , Fósforo , Iones , Adsorción , Cinética , Concentración de Iones de HidrógenoRESUMEN
Metal-organic frameworks (MOFs) are emerging as advanced nanoporous materials to remove phenylarsenic acid, p-arsanilic acid (p-ASA), and roxarsone (ROX) in the aqueous solution, while MOFs are often present as powder state and encounter difficulties in recovery after adsorption, which greatly limit their practical application in the aqueous environments. Herein, MIL-101 (Fe), a typical MOF, was mixed with sodium alginate and gelatin to prepare MIL-101@CAGE by three-dimensional (3D) printing technology, which was then used as a separatable adsorbent to remove phenylarsenic acid in the aqueous solution. The structure of 3D-printed MIL-101@CAGE was first characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetry and differential thermogravimetry (TG-DTG). The octahedral morphology of MIL-101 (Fe) was found unchanged during the 3D printing process. Then, the adsorption process of MIL-101@CAGE on phenylarsenic acids was systematically investigated by adsorption kinetics, adsorption isotherms, adsorption thermodynamics, condition experiments, and cyclic regeneration experiments. Finally, the adsorption mechanism between MIL-101@CAGE and phenylarsenic acid was further investigated. The results showed that the Langmuir, Freundlich, and Temkin isotherms were well fit, and according to the Langmuir fitting results, the maximum adsorption amounts of MIL-101@CAGE on p-ASA and ROX at 25 °C were 106.98 and 120.28 mg/g, respectively. The removal of p-ASA and ROX by MIL-101@CAGE remained stable over a wide pH range and in the presence of various coexisting ions. The regeneration experiments showed that the 3D-printed MIL-101@CAGE could still maintain a more than 90% removal rate after five cycles. The adsorption mechanism of this system might include π-π stacking interactions between the benzene ring on the phenylarsenic acids and the organic ligands in MIL-101@CAGE, hydrogen-bonding, and ligand-bonding interactions (Fe-O-As). This study provides a new idea for the scale preparation of a separatable and recyclable adsorbent based on MOF material for the efficient removal of phenylarsenic acid in the aqueous solution.
RESUMEN
Photocatalytic water decontamination has emerged as a highly promising technology for efficient and rapid water treatment, harnessing sustainable solar energy as its driving force. In this study, we prepared visible-light active Bi2S3/CoS2 composites for the degradation of naproxen (NPX) and the inactivation of Escherichia coli (E. coli). The homogeneous dispersion of CoS2 was stably integrated with Bi2S3, resulting in a significant enhancement of the specific surface area, efficient utilization of visible light, and effective separation of photogenerated charge carriers. Consequently, this synergistic photocatalytic system greatly facilitated the successful degradation of NPX and the inactivation of E. coli under visible-light irradiation. Compared to the pure Bi2S3 and CoS2 catalysts, the Bi2S3/CoS2 (1:2) composites displayed significantly enhanced photodegradation activity, achieving 96.46% (k = 0.2847 min-1) degradation of NPX within 90 min and maintaining good recyclability with no significant decline after six successive cycles. Additionally, the photocatalytic inactivation of E. coli results indicated that Bi2S3/CoS2 composites exhibited excellent performance, leading to the inactivation of 7 log10 cfu mL-1 of bacterial cells after 150 min of visible-light exposure. Scanning Electron Microscopy (SEM) and K+ ions leakage tests demonstrated that the destruction of the E. coli cell membrane structure resulted in cell death. The outcomes of this work suggest that Bi2S3/CoS2 composites hold significant potential for treating water contaminated with antibiotic and microbial pollutants.
Asunto(s)
Escherichia coli , Naproxeno , Naproxeno/farmacología , Naproxeno/metabolismo , Luz , Antibacterianos/farmacología , Antibacterianos/metabolismo , Microscopía Electrónica de Rastreo , CatálisisRESUMEN
The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)Oâ¢, CH3C(O)OOâ¢, Cu(III), and â¢OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO⢠was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO⢠mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O⢠and â¢OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.
RESUMEN
Solar-driven interfacial evaporation technology is regarded as an attracting sustainable strategy for obtaining portable water from seawater and wastewater, and the recycle of waste materials to fabricate efficient photothermal materials as evaporator to efficiently utilize solar energy is very critical, but still difficult. To this purpose, graphite recovered from spent lithium-ion batteries (SLIBs) was realized using a simple acid leaching method, and a reconstructed graphite-based porous hydrogel (RG-PH) was subsequently fabricated by crosslinking foaming method. The incorporation of reconstructed graphite (RG) improves the mechanical characteristics of hydrogels and the light absorption performance significantly. The evaporation rate of optimized RG-PH can constantly reach 3.4278â kg m-2 h-1 for desalination under a one solar irradiation, and it also showed the excellent salt resistance in various salty water. Moreover, RG-PH has a strong elimination of a variety of organic contaminants in wastewater, including the typical volatile organic compound of phenol. This research shows the potential application of flexible and durable solar evaporators made from waste materials in purifying seawater and wastewater, not only contributing to carbon neutrality by recycling graphite from SLIBs, but also ensuring the cost-effectiveness harvest of solar energy for constantly obtaining clean water.
RESUMEN
Arsenic (As) is a highly toxic heavy metal and has been widely concerned for its hazardous environmental impact. Aromatic organic arsenic (AOCs) has been frequently used as an animal supplement to enhance feed utilization and prevent dysentery. The majority of organic arsenic could be discharged from the body and evolve as highly toxic inorganic arsenic that is hazardous to the environment and human health via biological conversion, photodegradation, and photo-oxidation. Current environmental issues necessitate the development and application of multifunctional porous materials in environmental remediation. Compared to the conventional adsorbent, such as activated carbon and zeolite, metal-organic frameworks (MOFs) exhibit a number of advantages, including simple synthesis, wide variety, simple modulation of pore size, large specific surface area, excellent chemical stability, and easy modification. In recent years, numerous scientists have investigated MOFs related materials involved with organic arsenic. These studies can be divided into three categories: detection of organic arsenic by MOFs, adsorption to remove organic arsenic by MOFs, and catalytic removal of organic arsenic by MOFs. Here, we conduct a critical analysis of current research findings and knowledge pertaining to the structural characteristics, application methods, removal properties, interaction mechanisms, and spectral analysis of MOFs. We summarized the application of MOFs in organic arsenic detection, adsorption, and catalytic degradation. Other arsenic removal technologies and conventional substances are also being investigated. This review will provide relevant scientific researchers with references.
Asunto(s)
Intoxicación por Arsénico , Arsénico , Estructuras Metalorgánicas , Humanos , Estructuras Metalorgánicas/química , Intoxicación por Metales Pesados , AdsorciónRESUMEN
Solar steam generation technology (SSGT) using unlimited solar energy is regarded as one of the most promising sustainable technologies to produce clean water. However, most of studies on SSGT simply focus on how to improve salt resistance as well as exclude inorganic and organic pollutants in targeted water, and only very limited studies pay attention to the micro-organisms in the collected water. Herein, one porous Cu2 ZnSnS4 -based photothermal hydrogel (CZTS-PH) with antibacterial properties as well as good salt resistance was successfully prepared. The CZTS-PH was measured with the water evaporation rate as high as 3.249â kg m-2 h-1 and photothermal conversion efficiency of 96.3 % under one sun irradiation. Impressively, owing to the amino groups in the skeleton, CZTS-PH can significantly deteriorate the cell membrane and lead to the death of the Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which ensures its long-term stability photothermal conversion and the safety of clean water. Overall, the admired photothermal conversion efficiency, and the excellent salt resistance and antibacterial performance suggest that CZTS-PH could be a promising full-scale device applied in seawater desalination and water purification.
Asunto(s)
Hidrogeles , Aguas del Alcantarillado , Destilación , Escherichia coli , Staphylococcus aureus , Cloruro de Sodio , Agua de Mar , Agua , Antibacterianos/farmacologíaRESUMEN
Pharmaceuticals have recently emerged as a significant environmental concern due to the growth of population, expansion of industry, and the shift in modern lifestyles. Herein, we present a Fe(II)/percarbonate (SPC) process with dramatically enhanced efficiency by the introduction of zerovalent iron (ZVI). After the addition of ZVI, the removal rate of nizatidine (NZTD) went up from 71.7 to 84.2%. The removal rate of NZTD decreases with rising pH and speeds up with increasing temperature. It was found that under the condition of pH = 7 and T = 25 °C, the molar ratio of the optimal concentration of NZTD degradation in the system was [NZTD]0:[SPC]0:[Fe(II)]0:[ZVI]0 = 1:8:24:16, with a degradation rate of 99.8%. At the same time, target pollutants can also be successfully eliminated from actual water bodies. Moreover, we test for toxicity using luminescent bacteria, and the results demonstrate that the system is capable of effectively decreasing the toxicity of NZTD. The research findings can contribute to the clarification of the migration and transformation law of NZTD in the oxidation process, thereby providing a scientific basis and technical support for the removal of NZTD in the tertiary water treatment for a water source.
Asunto(s)
Hierro , Contaminantes Químicos del Agua , Nizatidina , Contaminantes Químicos del Agua/análisis , Oxidación-Reducción , Compuestos FerrososRESUMEN
Ciprofloxacin (CIP) is a third-generation quinolone antimicrobial with broad-spectrum antimicrobial activity, and is not fully metabolized in the human body, resulting in more than 70% of CIP being excreted into water as a prodrug. In this study, g-C3N4/BiOCl heterojunction structure composites were prepared to study the degradation effect of ciprofloxacin (CIP) under photocatalytic conditions. The results showed that CIP at 10 mg L-1 was best degraded after 90 min at 0.3 g L-1 g-C3N4/BiOCl-2, pH of 5.8 and PS dosing of 1 mM. The quenching experiments and electron spin resonance spectroscopy (ESR) confirmed that ËOH, ËSO4 - and h+ played a major role. After the photocatalytic degradation of this reaction system, the biological toxicity of CIP was effectively controlled. This material is stable and the CIP removal rate remained above 80% after four cycles of experiments.
RESUMEN
Acid red 73 (AR73) is a representative dye pollutant that poses a threat to the environment and human health. Effectively removing this type of pollutant by conventional processes is difficult. However, this study found that compared with UV/PDS, UV/O3, and PDS/O3, UV/O3/PDS composite system had the highest degradation effect on AR73. The degradation efficiency in the composite system reached 97.61% within 30 min, and the synergistic coefficients in the composite system were all greater than 1. In the UV/O3/PDS system, ·OH was the main free radical that mainly degrades AR73. The increase of PDS dosage promoted the degradation of AR73, but the increase of O3 dosage was difficult to greatly improve the degradation of AR73 effect. The kinetic model of the apparent reaction rate was determined. The UV/O3/PDS system can efficiently degrade AR73 in a wide range of substrate concentrations and pH levels, and at the same time showed good adaptability to various concentrations of anions (Cl-, CO32-, SO32-, and C2O42-). Under raw water quality, the degradation effect of AR73 was still as high as approximately 90%. The theoretical attack site was obtained by DFT calculation, and the possible degradation pathway of AR73 was proposed based on the GC-MS spectrum and UV-Vis absorption spectrum. The attack of -NN- by ·OH, SO4-, and O3 was proposed to be the main possible degradation pathway for AR73. Therefore, this study further improves the understanding of the UV/O3/PDS system and shows the potential applicability of this system in the treatment of dye wastewater.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Humanos , Cinética , Contaminantes Químicos del Agua/análisis , Peróxido de Hidrógeno , Rayos Ultravioleta , Oxidación-ReducciónRESUMEN
The activation of peroxydisulfate (PDS) by organic compounds has attracted increasing attention. However, some inherent drawbacks including quick activator decomposition and poor anti-interference capacity limited the application of organic compound-activated PDS. It was interestingly found that 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) could act as both activator and electron shuttle for PDS activation to enhance diclofenac (DCF) degradation over a pH range of 2.0-11.0. Multiple reactive species of ABTSâ¢+, â¢OH, and SO4â¢- were generated in the PDS/ABTS system, while only ABTSâ¢+ and â¢OH directly contributed to DCF degradation. ABTSâ¢+, generated via the reactions of ABTS with PDS, SO4â¢-, and â¢OH, was the dominant reactive species of DCF degradation. No significant decomposition of ABTS was observed in the PDS/ABTS system, and ABTS acted as both activator and electron shuttle. Four possible degradation pathways of DCF were proposed, and the toxicity of DCF decreased after treatment with the PDS/ABTS system. The PDS/ABTS system had good anti-interference capacity to common natural water constituents. Additionally, ABTS was encapsulated into cellulose to obtain ABTS@Ce beads, and the PDS/ABTS@Ce system possessed excellent performance on DCF degradation. This study proposes a new perspective to reconsider the mechanism of activating PDS with organic compounds and highlights the considerable contribution of organic radicals on contaminant removal.
Asunto(s)
Diclofenaco , Contaminantes Químicos del Agua , Oxidación-Reducción , Electrones , Contaminantes Químicos del Agua/análisis , Compuestos OrgánicosRESUMEN
The inactivation efficacy by monochloramine for disinfecting gastroenteritis-causing rotaviruses (RV) and Tulane viruses (TV), a surrogate for noroviruses, were evaluated in this study. In addition, the strategies for improving the disinfection efficiency of monochloramine by raising the temperature and sequentially implementing UV irradiation were investigated. The results showed that monochloramine was more effective in the inactivation of TV than RV. Additionally, the inactivation rate constants of RV and TV by monochloramine at 35 °C were improved approximately by 46% and 100%, respectively, compared to those at 25 °C. Moreover, applying UV irradiation before monochloramine enhanced the inactivation efficacy of RV and TV by 63% and 72% compared to monochloramine alone (UV: 6 mJ/cm2, NH2Cl: 60 ppm × min). Furthermore, the synergistic effect was observed during the RV inactivation by the sequential process. Especially, higher than 0.5 log10 reductions of RV VP1 genome contributed to the synergistic effect in sequential treatment, while less than 0.1 log10 reductions of RV VP1 genome were observed during UV alone (13 mJ/cm2) or monochloramine alone (94 ppm × min). The genome damage might be the primary mechanism of generating synergy in sequential treatment for the inactivation of RV. By comparison, no synergistic effect was discovered for the inactivation of TV due to high susceptibility to monochloramine and UV. The findings on the inactivation efficacy and mechanism for improvement will contribute to a wide application of monochloramine for virus inactivation in water treatment and distribution systems.
Asunto(s)
Norovirus , Rotavirus , Humanos , Norovirus/genética , Cloraminas/farmacología , Inactivación de Virus , Desinfección/métodosRESUMEN
Waterborne virus contamination might easily adsorb on the organic or inorganic surface in the complex aquatic environment. A quartz crystal microbalance coupled with dissipation monitoring was used to investigate the effects of the ionic strength of monovalent cation and divalent cation and pH on the deposition kinetics of bacteriophage MS2 on silica surface coated with Microcystis aeruginosa or kaolin, which represents organic or inorganic particle, respectively. Derjaguin-Landau-Verwey-Overbeek theory was used to illustrate the deposition mechanisms of MS2. The increased concentration of Na+ significantly enhanced the deposition rates of MS2 on both coated silica surfaces due to the reduction of repulsive electrostatic interactions. However, the MS2 deposition rates decreased at higher ionic strength of Ca2+, which accounted for the steric and hydrophobic interactions. And the higher MS2 deposition rates on both surfaces occurred at pH 3. In addition, the deposition rates of MS2 on kaolin-coated silica surfaces were higher than on the Microcystis-coated surface under all studied conditions. Furthermore, the Derjaguin-Landau-Verwey-Overbeek theory could elucidate the deposition mechanism in Na+ solution, whereas the steric and hydrophobic interactions should be considered for the presence of high concentration of Ca2+.
Asunto(s)
Levivirus , Microcystis , Cinética , Caolín/química , Propiedades de Superficie , Dióxido de Silicio/química , IonesRESUMEN
In this study, sodium tetraborate (Na2B4O7) was introduced to enhance the degradation of acetaminophen (ACT) in heat-activated peroxymonosulfate (PMS) process. The elimination of ACT in Na2B4O7/heat/PMS process followed the pseudo-first order kinetics. The corresponding kobs value with 10 mM Na2B4O7 was 33.1 times higher than that in heat/PMS process. 1O2 and HO· were identified as primary reactive species via quenching experiments and electron paramagnetic resonance technology. B(OH)4-, the hydrolysis product of Na2B4O7, reacted with PMS to generate HOOB(OH)3-. 1O2 was generated by the self-decomposition of PMS using B(OH)4- as catalyst, while HO· was produced via the breakage of peroxide bond of PMS and HOOB(OH)3-under high temperature. ACT was degraded by reactive species via the pathways of -NH- bond breakage, -OH replacement, -NH2 oxidation and benzene ring cleavage. Nine transformation intermediates were detected by LC/Q-TOF/MS, and the toxicity of reaction solution decreased significantly with the elimination of ACT. Increasing Na2B4O7 dosage, PMS concentration, initial pH and reaction temperature were conducive to ACT elimination. Humic acid, Cl- and CO32- inhibited the degradation of ACT heavily, while SO42- and NO3- had the negligible effects. Moreover, B(OH)4- could react with free chlorine to the inert B(OH)3OCl- and further significantly suppress the formation of chlorinated by-products for the treatment of Cl--containing water in Na2B4O7/heat/PMS process. This study provided an effective way to enhance the oxidation capacity of heat/PMS process and suppress the formation of chlorinated by-products in chloride-containing water, and the findings had important implications for using borate buffer in the studies of PMS-based advanced oxidation processes.