Intractable ventricular tachycardia and bridging to heart transplantation with a non-pulsatile flow assist device in a patient with isolated left-ventricular non-compaction.

Intractable ventricular tachycardia was investigated in a 51-year-old man with isolated left ventricular non-compaction during implantation of an automated internal cardioverter-defibrillator. Favorable bridging to cardiac transplantation was achieved with the DeBakey left ventricular assist device (LVAD).

Continuous blood pressure monitoring utilizing a CMOS tactile sensor.

A novel tactile device based on a monolithically integrated sensor chip is presented for external blood pressure measurement. It uses a tonometric principle, thus allowing for continuous monitoring of the blood pressure without the need for an invasive catheter. On the chip, the deflection of membranes in an array is sensed capacitively and read out using a SigmaDelta-modulator. The membrane array and the modulator are fabricated on a single chip using an industrial CMOS (complementary metal oxide semiconductor) technology combined with post-process micromachining to achieve small and portable devices with low power consumption. The tested device is operated at a conversion rate of 1 kilosamples per second and is pressure biased to a 2000 hPa (1500 mmHg) reference point. The power consumption of the sensor chip is 11.5 mW with signal-to-noise ratio better than 72 dB. During testing a pressure resolution of approximately 8 hPa (6 mmHg) for one digit at the output of the SigmaDelta-modulator is achieved over the range of interest continuous blood pressure monitoring using this CMOS-based tactile device is successfully demonstrated. The characteristic features of a blood pressure waveform are clearly recognizable from the acquired data.

Experiences in robotically enhanced IMA-preparation as initial step towards totally endoscopic coronary artery bypass grafting.

AIM: To evaluate the feasibility of robotically enhanced preparation of internal mammary arteries (IMA). METHOD: Via three trocars in left thoracic wall the left, right or both IMA were skeletonized under CO(2) insufflation and single lung ventilation using electrocautery. RESULTS: In 12 months, 26 LIMA, five BIMA and one RIMA were dissected. In five patients, the procedure had to be determined (IMA injury (two), respiratory insufficiency (two), and heart penetration (one)). Mean intrathoracic pressure was 9.7+/-1.5 mmHg. Mean time for LIMA and RIMA dissection was 66.7+/-21.1 and 99.2+/-8.7 min, respectively. In 10 patients, pericardium was incised and course of LAD assessed. However, in two patients, this coronary did not correlate with LAD. Time for instrument change depended on type of tool (cautery blade: 24.9+/-13.1 s, clip applier 72.8+/-28.4 s). CONCLUSION: Robotic dissection of IMA is reasonable. However, life-threatening complications can barely be managed due to inadequate tools and excessive time for instrument change. Incorrect determination of coronaries can result in misplaced anastomoses.

Left ventricular assist device as bridge to heart transplantation--lessons learned with the MicroMed DeBakey axial blood flow pump.

OBJECTIVE: The MicroMed DeBakey left ventricular assist device (LVAD) axial blood flow pump was used as bridge to heart transplantation (HTx) in patients with terminal heart failure. The aim was to evaluate this novel mechanical circulatory support system in regard to overall outcome. METHODS: Prospective study in 15 HTx candidates (mean age 40+/-7 years) with terminal heart failure and maximal medical treatment due to ischemic cardiomyopathy (CMP, n=5), dilated CMP (n=3), restrictive CMP (n=2), unclassified CMP (n=1), metabolic CMP (n=1), valvular CMP (n=1) and congenital CMP (n=2). All patients were implanted with a MicroMed DeBakey LVAD. A rescue procedure was necessary in eight critical patients, while seven underwent elective LVAD implantation. Procedures were performed via median sternotomy, in normotherm femoro-femoral CPB (mean duration 59+/-1 min). Oral Marcoumar (INR 2.0-3.0) and Aspirin (100 mg daily) were started as soon as possible. Patients were discharged into a specialized rehabilitation clinic from which it was possible to release them home after a few weeks. RESULTS: Successful implantation and discharge from ICU (mean stay 10+/-7 days) was possible in 11 patients. Seven were transplanted (mean support 50.7 days) and one is awaiting HTx (support >310 days) in the comfort of his home (NYHA I). Survival was 100% among the transplanted patients. Of the seven elective implants, five, and of the eight rescue procedures three patients underwent successful HTx. Four patients died early, while three patients died late on pump support due to intracranial hemorrhage (n=2, 73 and 76 days) and chest infection (n=1, 124 days). All survivors were discharged from hospital, with significant decrease in NYHA class (mean 3.8-2.4 (n=11)). Treadmill testing showed increased exercise tolerance, from 35 to 71W (n=4). Plasma BNP values (mean 950-162 ng/l (n=4)) and pulmonary resistance (mean 316-194.5 dyne s/cm(5) (n=3)) decreased significantly during LVAD support. CONCLUSIONS: The MicroMed DeBakey LVAD is simple to implant; outpatient treatment is safe and efficient. Patients' condition and pulmonary resistances normalize within 6 weeks, making previously considered inoperable patients amenable for HTx. HTx can be performed in low-risk situation, allowing better donor-recipient matching and improving overall outcome.

The relevance of large strains in functional tissue engineering of heart valves.

BACKGROUND: Exposing the developing tissue to flow and pressure in a bioreactor has been shown to enhance tissue formation in tissue-engineered heart valves. Animal studies showed excellent functionality in these valves in the pulmonary position. However, they lack the mechanical strength for implantation in the high-pressure aortic position. Improving the in vitro conditioning protocol is an important step towards the use of these valves as aortic heart valve replacements. In this study, the relevance of large strains to improve the mechanical conditioning protocol was investigated. METHODS: Using a newly developed device, engineered heart valve tissue was exposed to increasing cyclic strain in vitro. Tissue formation and mechanical properties were analyzed and compared to unstrained controls. RESULTS: Straining resulted in more pronounced and organized tissue formation with superior mechanical properties over unstrained controls. Overall tissue properties improved with increasing strain levels. CONCLUSIONS: The results demonstrate the significance of large strains in promoting tissue formation. This study may provide a methodological basis for tissue engineering of heart valves appropriate for systemic pressure applications.

Advanced training model for beating heart coronary artery surgery: the Zurich heart-trainer.

OBJECTIVE: Coronary artery surgery with beating heart technique is gaining increasing popularity. However, it is a challenging technique even for well-trained cardiac surgeons. Thus, a training model for beating heart surgery was developed to increase safety and accuracy of this procedure. METHODS: The model consists of differentially hardened polyurethane resembling mechanical properties of the human heart. The covering used in this model is a 1:1 replica of the human thoracic wall with optionally embedded skeletal structures. Sternotomy, lateral thoracotomy or trocar placement is possible to access the lungs, the pericardium and the heart with adjacent vessels. Disposable artificial coronaries variable in size, wall quality or wall thickness are embedded in the synthetic myocardium. Two-layer vessels, which can simulate dissection, are available. Bypass conduits utilize the same material. Coronaries/bypasses as well as part of the ascending aorta are water-tight and can be rinsed with saline. Lungs can be inflated. A purpose-built pump induces heart movement with adjustable or randomized stroke volume, heart rate and arrhythmia induction. RESULTS: The model was tested in a recent 'Wet-Lab' course attended by 30 surgeons. All conventional instruments and stabilizers with standard techniques can be used. Training with beating or non-beating heart was possible. Time needed for an anastomosis was similar to clinical experience. Each artificial tissue showed its individual nature-like qualities. Various degrees of difficulty can be selected, according to stroke volume, heart rate, arrhythmia, vessel size and vessel quality. The model can be quickly and easily set up and is fully reusable. CONCLUSIONS: The similarity to human tissue and the easy set-up make this completely artificial model an ideal teaching tool to increase the confidence of cardiac surgeons dealing with beating heart and minimally invasive surgery.

Endoscopic saphenous vein harvesting for CABG -- a randomized, prospective trial.

BACKGROUND: The saphenous vein is an established conduit for coronary revascularization. Disadvantages of traditional harvest technique are significant pain and morbidity. We compared the endoscopic harvest technique with the traditional method. METHOD: 140 coronary artery bypass graft (CABG) patients were randomized into 2 groups: endoscopic vein harvesting (EVH; n = 80) and traditional open vein harvesting (OVH; n = 60). Analysis included preoperative risk factors for wound complication, harvesting time, graft injury, and intraoperative and postoperative complications. Patient follow-up lasted 3 months. RESULTS: The preoperative risk profiles of the groups were comparable. In the EVH group, 5 patients (7.1 %) had to be switched to the open technique. EVH time was 45 +/- 6.2 min vs. 31.1 +/- 6.5 min. Two patients (2.5 %) had to be revised because of bleeding complication vs. 6 (10 %) in the OVH group. No local infections or wound complications were observed in the EVH group vs. 11 (18 %) cases in the OVH group. Two OVH cases (3.6 %) were readmitted for wound debridement. All EVH patients reported less pain and were completely satisfied by the cosmetic results. CONCLUSION: EVH is a safe and efficient technique for CABG. Morbidity was significantly lower, with reduced pain and better cosmetic results. EVH time was significantly longer compared to the traditional harvesting technique.

Total robotic-enhanced pericardiectomy for effusive pericarditis.

With the DaVinci Robot only recently in clinical use, limitations of video-assisted thoracoscopy could disappear due to Endo-Wrist features, tremor cancellation and three-dimensional view. This report describes the total endoscopic pericardiectomy successfully achieved with robotic assistance in a 50-year-old man suffering from effusive pericarditis.

Tissue engineering: complete autologous valve conduit--a new moulding technique.

OBJECTIVE: The use of fibrin gel, which can be produced from patients' blood, was investigated as an autologous, biodegradable scaffold. A new moulding technique was developed to create a complete aortic root. METHODS: A new moulding technique was generated for the creation of complete valve conduit. On the basis of biomechanical valve design studies, a tricuspid "ventricular" and "aortic" stamp were developed. A silicone-coated aluminum cylinder was used to circumferentially limit the mould. The cell/gel suspension was filled into the mould and polymerization was started. RESULTS: The creation of complex structures such as complete valve conduits is possible with the moulding technique described. With a layer thickness of up to 2 mm, histological investigations showed excellent tissue development with viable fibroblasts surrounded by collagen bundles. CONCLUSION: Fibrin gel unifies many properties of an ideal scaffold: The formation of complex structures is possible, the degradation and polymerization is controllable and the formation of the extracellular matrix is excellent.

Preoperative administration of steroids: influence on adhesion molecules and cytokines after cardiopulmonary bypass.

BACKGROUND: Cardiopulmonary bypass (CPB) is associated with tissue damage mediated by adhesion molecules and cytokines. Prebypass steroid administration may modulate the inflammatory response, resulting in improved postoperative recovery. METHODS: Fifty patients undergoing elective coronary operations under normothermic CPB were randomized into two groups: group A (n = 24) received intravenous methylprednisolone (10 mg/kg) 4 hours preoperatively, and group B (n = 26) served as controls. Cytokines (tumor necrosis factor-alpha [TNF-alpha], interleukin-2R [IL-2R], IL-6, IL-8), soluble adhesion molecules (sE-selectin, sICAM-1), C-reactive protein, and leukocytes were measured before steroid application, then 24 and 48 hours, and 6 days postoperatively. Adhesion molecules were measured by enzyme-linked immunosorbent assay, cytokines by chemiluminescent immunoassay. Postoperatively, hemodynamic measurements, inotropic agent requirements, blood loss, duration of mechanical ventilation, and intensive care unit stay were compared. RESULTS: Aortic cross-clamp and CPB time was similar in both groups. Prednisolone administration reduced postoperative levels of IL-6 (611 versus 92.7 pg/mL; p = 0.003), TNF-alpha (24.4 versus 11.0 pg/L, p = 0.02), and E-selectin (327 versus 107 ng/mL, p = 0.02). Postoperative recovery did not differ between groups. CONCLUSIONS: Preoperative administration of methylprednisolone blunted the increase of IL-6, TNF-alpha, and E-selectin levels after CPB but had no measurable effect on postoperative recovery.