RESUMEN
In the present work, we introduced a highly sensitive vibration sensor, which is based on the dispersion turning point (DTP) microfiber Mach-Zehnder interferometer. The axial strain and vibration sensing characteristics of the microfiber Mach-Zehnder interferometer were investigated. First, we theoretically analyzed the spectrum evolution characteristics of the microfiber Mach-Zehnder interferometer caused by axial strain. Second, the microfiber with different diameters was fabricated using the electrode discharge and fused taper method, and the axial strain experiments were conducted; the maximum sensitivity of the DTP microfiber with a diameter of â¼2.2 µm reached -45.55 pm/µÉ at â¼1550 nm. Finally, based on the axial strain principle of the microfiber, we designed a highly sensitive vibration sensor using a DTP microfiber integrated into a rectangular through-hole cantilever beam. The 30-3500 Hz vibration signal monitoring could be realized, the maximum signal-to-noise ratio (SNR) was â¼75 dB at 52 Hz, and the acceleration sensitivity reached as high as 0.764 V/g at 45Hz. These results suggested the high performance of the microfiber in axial strain and micro-vibration sensing fields.
RESUMEN
An optic-fiber vibration sensor based on the reflected 81° tilted fiber grating (81° TFG) integrated with a symmetrical flexible hinge is proposed and experimentally demonstrated in this paper. The vibration sensor is composed of a symmetrical flexible hinge and a reflected 81° TFG, the ends of which are simply fixed on the upper surface of the mass. The theoretical model of the proposed vibration sensor is analyzed, by which the important parameters related to the resonant frequency of the sensor are simulated and discussed; then, the vibration sensing experiments are conducted. Experiment results show that TE/TM mode of the 81° TFG can provide the maximal acceleration sensitivity of 338.28 and 299.94 mV/g at 400 Hz in the flat area of the amplitude-frequency response (50-400 Hz), which is increased by 9.95 and 11.5 times as compared with the optical fiber cantilever beam structure, respectively. Further, the signal-to-noise ratio in the flat area (50-400 Hz) is about â¼66.275dB under the acceleration of 2 g, which is increased by â¼20dB. Furthermore, it can be used for detecting mechanical vibration of medium-high frequency ranging from 50 to 3500 Hz. The proposed 81° TFG vibration sensor has the characteristics of small volume, simple package, high acceleration sensitivity, and wide vibration signal response range, which will ensure it has broad application prospects in the field of mechanical vibration.