RESUMEN
Photocatalytic CO2 reduction captures solar energy to convert CO2 into hydrocarbon fuels, thus shifting the dependence on rapidly depleting fossil fuels. Among the various proposed photocatalysts, systems containing metal active sites (MASs) possess obvious advantages, such as effective photogenerated carrier separation, suitable adsorption and activation of intermediates, and achievable C-C coupling to generate multi-carbon (C2+) products. The present review aims to summarize the typical photocatalytic materials with MAS, highlighting the critical role of different formulations of MAS in CO2 photoreduction, especially for C2+ product generation. State-of-the-art progress in the characterization and theoretical calculations for MAS-containing photocatalysts is also emphasized. Finally, the challenges and prospects of catalytic systems involving MAS for solar-driven CO2 conversion are outlined, providing inspiration for the future design of materials for efficient photocatalytic energy conversion.
RESUMEN
Recovery of spent Pt/C catalyst is a sustainable low-cost route to promote large-scale application of hydrogen fuel cells. Here, we report a thermal migration strategy to recover the spent Pt/C. In this route, the ZIF-8 is used to produce nitrogen doped porous carbon (NC) with abundant pyrimidine nitrogen sites as the new support. Subsequently, the spent Pt/C, NC, and NH4Cl etching reagent are mixed and heated at 900 oC to thermally migrate Pt from Pt/C onto NC with the help of NH4Cl etching reagent. The thermal-volatilized Pt tends to be captured by the pyrimidine nitrogen sites of NC support, thus producing the Pt clusters or 4 - 5 nm Pt particles. The recovered Pt/NC catalyst exhibits the highly stable oxygen reduction activities with a mass activity of 0.6 A mgPt-1 after 30000-cycle accelerated durability test.
RESUMEN
CO2 reduction photocatalysts are favorable for obtaining renewable energy. Enriched active sites and effective photogenerated-carriers separation are keys for improving CO2 photo-reduction. A thulium (Tm) single atom tailoring strategy introducing carbon vacancies in porous tubular graphitic carbon nitride (g-C3N4) surpassing the ever-reported g-C3N4 based photocatalysts, with 199.47 µmol g-1 h-1 CO yield, 96.8% CO selectivity, 0.84% apparent quantum efficiency and excellent photocatalytic stability, is implemented in this work. Results revealed that in-plane Tm sites and interlayer-bridged Tm-N charge transfer channels significantly enhanced the aggregation/transfer of photogenerated electrons thus promoting CO2 adsorption/activation and contributing to *COOH intermediates formation. Meanwhile, Tm atoms and carbon vacancies both benefit for rich active sites and enhanced photogenerated-charge separation, thus optimizing reaction pathway and leading to excellent CO2 photo-reduction. This work not only provides guidelines for CO2 photo-reduction catalysts design but also offers mechanistic insights into single-atom based photocatalysts for solar fuel production.
RESUMEN
Stability is the main challenge for the application of PtCo catalysts because Co tends to leach during the electrochemical reaction. Herein, we immerse and adsorb dopamine to densely coat Pt0.8Co0.2 particles and subsequently thermally carbonize the coating into few-layer nitrogen-doped graphene to produce Pt0.8Co0.2@NC. This coating effectively hinders direct contact between Pt0.8Co0.2 particles and the electrolyte, thereby enhancing the stability of the catalyst by preventing Ostwald ripening and suppressing competitive adsorption of toxic species, while also bolstering its antipoisoning ability. Experimental results indicate that the thin coating does not compromise the oxygen reduction reaction activity of the catalyst, showcasing a half-wave potential of 0.81 V in alkaline electrolytes. Spectroscopic results suggest that a strong bonding interaction between Pt and the pyridinic N of N-doped graphene contributes to the generation of a dense coating. The coating layer does not affect the four-electron reaction mechanism of the Pt0.8Co0.2 alloy, and the coordinatively unsaturated carbon atoms on Pt0.8Co0.2@NC serve as active oxygen reduction reaction centers.
RESUMEN
Developing efficient photocatalysts for two-electron water splitting with simultaneous H2O2 and H2 generation shows great promise for practical application. Currently, the efficiency of two-electron water splitting is still restricted by the low utilization of photogenerated charges, especially holes, of which the transfer rate is much slower than that of electrons. Herein, Ru single atoms and RuOx clusters are co-decorated on ZnIn2S4 (RuOx/Ru-ZIS) to employ as multifunctional sites for efficient photocatalytic pure water splitting. Doping of Ru single atoms in the ZIS basal plane enhances holes abstraction from bulk ZIS by regulating the electronic structure, and RuOx clusters offer a strong interfacial electric field to remarkably promote the out-of-plane migration of holes from ZIS. Moreover, Ru single atoms and RuOx clusters also serve as active sites for boosting surface water oxidation. As a result, an excellent H2 and H2O2 evolution rates of 581.9 µmol g-1 h-1 and 464.4 µmol g-1 h-1 is achieved over RuOx/Ru-ZIS under visible light irradiation, respectively, with an apparent quantum efficiency (AQE) of 4.36% at 400 nm. This work paves a new way to increase charge utilization by manipulating photocatalyst using single atom and clusters.
RESUMEN
The synthesis of the accurate composition and morphological/structural design of multielement semiconductor materials is considered an effective strategy for obtaining high-performance hybrid photocatalysts. Herein, sulfur vacancy (Vs)-bearing In2S3/CuInS2 microflower heterojunctions (denoted Vs-In2S3/CuInS2) were formed in situ using In2S3 microsphere template-directed synthesis and a metal ion exchange-mediated growth strategy. Photocatalysts with flower-like microspheres can be obtained using hydrothermally synthesized In2S3 microspheres as a template, followed by Ostwald ripening growth during the metal cation exchange of Cu+ and In3+. The optimal heterostructured Vs-In2S3/CuInS2 microflowers exhibited CO and CH4 evolution rates of 80.3 and 11.8 µmol g-1 h-1, respectively, under visible-light irradiation; these values are approximately 4 and 6.8 times higher than those reported for pristine In2S3, respectively. The enhanced photocatalytic performance of the Vs-In2S3/CuInS2 catalysts could be attributed to the synergistic effects of the following factors: (i) the constructed heterojunctions accelerate charge-carrier separation; (ii) the flower-like microspheres exhibit highly uniform morphologies and compositions, which enhance electron transport and light harvesting; and (iii) the vs. may trap excited electrons and, thus, inhibit charge-carrier recombination. This study not only confirms the feasibility of the design of heterostructures on demand, but also presents a simple and efficient strategy to engineer metal sulfide photocatalysts with enhanced photocatalytic performance.
RESUMEN
Targeting selective CO2 photoreduction into CH4 remains a challenge due to the sluggish reaction kinetics and poor hydrogenation ability of the unstable intermediate. Here, the active Pt2+ sites were photodeposited on the SrTiO3 photocatalyst, which was well demonstrated to manipulate the CH4 product selectivity. The results showed that SrTiO3 mainly yielded the CO (6.98 µmol g-1) product with poor CH4 (0.17 µmol g-1). With the Pt2+ modification, 100% CH4 selectivity could be obtained with an optimized yield rate of 8.07 µmol g-1. The prominent enhancement resulted from the following roles: (1) the strong electronic interaction between the Pt2+ cocatalyst and SrTiO3 could prompt efficient separation of the photoelectron-hole pairs. (2) The Pt2+ sites were active to capture and activate inert CO2 into HCO3- and CO32- species and allowed fast *COOH formation with the lowered reaction barrier. (3) Compared with SrTiO3, the formed *CO species could be captured tightly on the Pt2+ cocatalyst surface for generating the *CH2 intermediate by the following electron-proton coupling reaction, thus leading to the CH4 product with 100% selectivity.
RESUMEN
Lattice-oxygen activation has emerged as a popular strategy for optimizing the performance and selectivity of oxide-based thermocatalysis and electrolysis. However, the significance of lattice oxygen in oxide photocatalysts has been ignored, particularly in gas-solid reactions. Here, using methane oxidation over a Ru1@ZnO single-atom photocatalyst as the prototypical reaction and via 18O isotope labelling techniques, we found that lattice oxygen can directly participate in gas-solid reactions. Lattice oxygen played a dominant role in the photocatalytic reaction, as determined by estimating the kinetic constants in the initial stage. Furthermore, we discovered that dynamic diffusion between O2 and lattice oxygen proceeded even in the absence of targeted reactants. Finally, single-atom Ru can facilitate the activation of adsorbed O2 and the subsequent regeneration of consumed lattice oxygen, thus ensuring high catalyst activity and stability. The results provide guidance for next-generation oxide photocatalysts with improved activities and selectivities.
RESUMEN
MXene aerogels, known for good electrical properties, offer immense potential for the development of high-sensitivity pressure sensors. However, the intrinsic challenges stemming from the poor self-assembly capability and high hydrophilicity of MXene impede the natural drying process of MXene-based hydrogels, thereby constraining their application on a large scale in sensor technology. Herein, a graphene-assisted approach aimed at modulating the hydrophobicity and enhancing framework strength of MXene through a well-designed prefreezing technique incorporating 3D spherical macroporous structures is proposed. This synergistic strategy enables the fabrication of naturally dried MXene aerogels across various size scales. Moreover, the integration of 3D spherical macroporous structures improves elasticity and electrical responsiveness of aerogels. Consequently, the aerogel sensor exhibits great performances, including high sensitivity (1250 kPa-1), low detection limit (0.4 Pa), wide frequency response range (0.1-8 Hz), and excellent stability (1000 cycles). This sensor proves adept at monitoring pressure signals ranging from lightweight paper to human motion. Additionally, the application of customized laser engraving endows aerogels with unique functionalities, such as compressibility and immunity to strain, stretchability and resistance to compression, as well as wind detection. Thus, the proposed approach holds significant promise as a scalable method for the mass production of aerogels with versatile applications.
RESUMEN
Enhancing the charge separation efficiency is a big challenge that limits the energy conversion efficiency of photoelectrochemical (PEC) water splitting. Surface states generated by protonation of TiO2 are the efficient charge separation passageways to massively accept or transfer the photogenerated electrons. However, a challenge is to avoid the deprotonation of a protonated TiO2 photoelectrode at the operation temperature. Here, we found that the terminal hydroxyl group (OHT) as surface states on the TiO2 surface generated via electrochemical protonation of TiO2 at 90 °C [90-TiO2-x-(OH)x] is thermally stable. As a result, the thermally enhanced photocurrent of the 90-TiO2-x-(OH)x electrode reached 1.05 mA cm-2 under 80 °C, and the stability was maintained up to 10 h with a slight photocurrent decrease of 3%. The thermally stable surface states as charge separation paths provide an effective method to couple the heat field with the PEC process via thermal-stimulating hopping of polarons.
RESUMEN
Advanced photocatalysts are highly desired to activate the photocatalytic CO2reduction reaction (CO2RR) with low concentration. Herein, the NiSn(OH)6with rich surface lattice hydroxyls was synthesized to boost the activity directly under the natural air. Results showed that terminal Ni-OH could serve as donors to feed protons and generate oxygen vacancies (VO), thus beneficial to convert the activated CO2(HCO3-) mainly into CO (5.60µmol g-1) in the atmosphere. It was flexible and widely applicable for a stable CO2RR from high pure to air level free of additionally adding H2O reactant, and higher than the traditional gas-liquid-solid (1.58µmol g-1) and gas-solid (4.07µmol g-1) reaction system both using high pure CO2and plenty of H2O. The strong hydrophilia by the rich surface hydroxyls allowed robust H2O molecule adsorption and dissociation at VOsites to achieve the Ni-OH regeneration, leading to a stable CO yield (11.61µmol g-1) with the enriched renewable VOregardless of the poor CO2and H2O in air. This work opens up new possibilities for the practical application of natural photosynthesis.
RESUMEN
Carbon dioxide (CO2), a member of greenhouse gases, contributes significantly to maintaining a tolerable environment for all living species. However, with the development of modern society and the utilization of fossil fuels, the concentration of atmospheric CO2 has increased to 400 ppm, resulting in a serious greenhouse effect. Thus, converting CO2 into valuable chemicals is highly desired, especially with renewable solar energy, which shows great potential with the manner of photothermal catalysis. In this review, recent advancements in photothermal CO2 conversion are discussed, including the design of catalysts, analysis of mechanisms, engineering of reactors, and the corresponding techno-economic analysis. A guideline for future investigation and the anthropogenic carbon cycle are provided.
RESUMEN
The comprehension of activity and selectivity origins of the electrooxidation of organics is a crucial knot for the development of a highly efficient energy conversion system that can produce value-added chemicals on both the anode and cathode. Here, we find that the potential-retaining trivalent nickel in NiOOH (Fermi level, -7.4 eV) is capable of selectively oxidizing various primary alcohols to carboxylic acids through a nucleophilic attack and nonredox electron transfer process. This nonredox trivalent nickel is highly efficient in oxidizing primary alcohols (methanol, ethanol, propanol, butanol, and benzyl alcohol) that are equipped with the appropriate highest occupied molecular orbital (HOMO) levels (-7.1 to -6.5 eV vs vacuum level) and the negative dual local softness values (Δsk, -0.50 to -0.19) of nucleophilic atoms in nucleophilic hydroxyl functional groups. However, the carboxylic acid products exhibit a deeper HOMO level (<-7.4 eV) or a positive Δsk, suggesting that they are highly stable and weakly nucleophilic on NiOOH. The combination (HOMO, Δsk) is useful in explaining the activity and selectivity origins of electrochemically oxidizing alcohols to carboxylic acid. Our findings are valuable in creating efficient energy conversions to generate value-added chemicals on dual electrodes.
RESUMEN
People have been looking for an energy-efficient and sustainable method to produce future chemicals for decades. Heterogeneous single-atom catalysts (SACs) with atomic dispersion of robust, well-characterized active centers are highly desirable. In particular, correlated SACs with cooperative interaction between adjacent single atoms allow the switching of the single-site pathway to the dual or multisite pathway, thus promoting bimolecular or more complex reactions for the synthesis of fine chemicals. Herein, the structural uniqueness of correlated SACs, including the intermetal distance and electronic interaction in homo/heteronuclear metal sites is featured. Recent advances in the production methods of correlated SACs, showcasing the research status and challenges in traditional methods (such as pyrolysis, wet impregnation, and confined synthesis) for building a comprehensive multimetallic SAC library, are summarized. Emerging strategies such as process automation and continuous-flow synthesis are highlighted, minimizing the inconsistency in laboratory batch production and allowing high throughput screening and upscaling toward the next-stage chemical production by correlated SACs.
RESUMEN
With ZIF-67 as the precursor, oxygen vacancy-rich Co3O4 nanoparticles were derived and anchored on the surface of 2D polyimide (PI) to construct a Z-scheme hybrid heterojunction (20ZP) through a simultaneous solvothermal in situ crystallization and polymerization strategy. XRD, XPS and EPR confirmed that both Co(III) and oxygen vacancies are formed during the low temperature conversion of ZIF-67 to Co3O4 nanoparticles that in turn accelerate the polymerization of PI. Synchronous crystallization makes the interfacial architecture intermetal and compact, inducing a strong interfacial electronic interaction between Co3O4 nanoparticles and PI. UV-vis DRS spectra and transient photocurrent response demonstrate that the incorporation of Co3O4 on polyimide not only extends the light absorption in the visible range, but also enhances the charge transfer rate. EIS, TRPL techniques and DFT calculations have confirmed that the photoinduced interfacial charge transfer pathway of this hybrid heterojunction characterized the Z-scheme in which the photoinduced electrons transfer from the conduction band of Co3O4 to the valence band of PI, significantly inhibiting the recombination of electrons and holes within PI. More importantly, the oxygen vacancies located below the conductor band of Co3O4 can deepen the band bending, improve the charge separation efficiency and accelerate electron transfer between Co3O4 and PI. This Z-scheme hybrid heterojunction structure can not only maintain the high reducing capacity of photoinduced electrons on the conductor band of PI, but also enhance the oxidative capacity of the heterojunction composite material, thus promoting the overall progress of the photocatalytic hydrogen release reaction.
RESUMEN
Compressive strain, downshifting the d-band center of transition metal oxides, is an effective way to accelerate the sluggish kinetics of oxygen evolution reaction (OER) for water electrolysis. Here, we find that anisotropic thermal expansion can produce compressive strains of the IrO6 octahedron in Sr2IrO4 catalyst, thus downshifting its d-band center. Different from the previous strategies to create constant strains in the crystals, the thermal-triggered compressive strains can be real-timely tuned by varying temperature. As a result of the thermal strain accelerating OER kinetics, the Sr2IrO4 exhibits the nonlinear lnjo - T-1 (jo, exchange current density; T, absolute temperature) Arrhenius relationship, resulting from the thermally induced low-barrier electron transfer in the presence of thermal compressive strains. Our results verify that the thermal field can be utilized to manipulate the electronic states of Sr2IrO4 via thermal compressive strains downshifting the d-band center, significantly accelerating the OER kinetics, beyond the traditional thermal diffusion effects.
RESUMEN
High entropy alloys and metallic glasses, as two typical metastable nanomaterials, have attracted tremendous interest in energy conversion catalysis due to their high reactivity in nonequilibrium states. Herein, a novel nanomaterial, layered high entropy metallic glass (HEMG), in a higher energy state than low-entropy alloys and its crystalline counterpart due to both the disordered elemental and structural arrangements, is synthesized. Specifically, the MnNiZrRuCe HEMG exhibits highly enhanced photothermal catalytic activity and long-term stability. An unprecedented CO2 methanation rate of 489 mmol g-1 h-1 at 330 °C is achieved, which is, to the authors' knowledge, the highest photothermal CO2 methanation rate in flow reactors. The remarkable activity originates from the abundant free volume and high internal energy state of HEMG, which lead to the extraordinary heterolytic H2 dissociation capacity. The high-entropy effect also ensures the excellent stability of HEMG for up to 450 h. This work not only provides a new perspective on the catalytic mechanism of HEMG, but also sheds light on the great catalytic potential in future carbon-negative industry.
RESUMEN
The ability to create perovskite-based heterostructures with desirable charge transfer characteristics represents an important endeavor to render a set of perovskite materials and devices with tunable optoelectronic properties. However, due to similar material selection and band alignment in type-II and Z-scheme heterostructures, it remains challenging to obtain perovskite-based heterostructures with a favorable electron transfer pathway for photocatalysis. Herein, we report a robust tailoring of effective charge transfer pathway in perovskite-based heterostructures via a type-II to Z-scheme transformation for highly efficient and selective photocatalytic CO2 reduction. Specifically, CsPbBr3/TiO2 and CsPbBr3/Au/TiO2 heterostructures are synthesized and then investigated by ultrafast spectroscopy. Moreover, taking CsPbBr3/TiO2 and CsPbBr3/Au/TiO2 as examples, operando experiments and theoretical calculations confirm that the type-II heterostructure could be readily transformed into a Z-scheme heterostructure through establishing a low-resistance Ohmic contact, which indicates that a fast electron transfer pathway is crucial in Z-scheme construction, as further demonstrated by CsPbBr3/Ag/TiO2 and CsPbBr3/MoS2 heterostructures. In contrast to pristine CsPbBr3 and CsPbBr3/TiO2, the CsPbBr3/Au/TiO2 heterostructure exhibits 5.4- and 3.0-fold enhancement of electron consumption rate in photocatalytic CO2 reduction. DFT calculations and in situ diffuse reflectance infrared Fourier transform spectroscopy unveil that the superior CO selectivity is attributed to the lower energy of *CO desorption than that of hydrogenation to *HCO. This meticulous design sheds light on the modification of perovskite-based multifunctional materials and enlightens conscious optimization of semiconductor-based heterostructures with desirable charge transfer for catalysis and optoelectronic applications.