Porous polymer monolithic columns to investigate the interaction of humic substances with herbicides and emerging pollutants by affinity chromatography.

BACKGROUND: Understanding the interaction mechanisms and the relevant binding constants between humic acids and emerging or regulated pollutants is of utmost importance in predicting their geochemical mobility, bioavailability, and degradation. Fluorescence spectroscopy, UV-vis spectroscopy, equilibrium dialysis, and solid-phase extraction combined with liquid chromatography-mass spectrometry have been employed to elucidate interactions of humic acids with organic micropollutants, especially pharmaceutical drugs. These methods demand large sample volumes, long equilibration times, and laborious extraction steps which may imply analytical errors. Monolithic high-performance affinity chromatography is an alternative and simpler method to investigate these interactions and determine the binding constants. RESULTS: Polymer monoliths based on aminated glycidyl methacrylate and ethylene glycol dimethacrylate served to immobilize Cu(II) and then humic acid to produce monolithic affinity chromatography columns with humic acid as the active interaction phase. About 86.5 mg of humic acid was immobilized per gram of polymer. The columns enabled a comparison of the binding strength of humic acid with herbicides and emerging pollutants at 25 °C and pH 6.0 ± 0.1. Paracetamol, acetylsalicylic acid, and salicylic acid did not retain. Among the compounds that interacted with humic acid, the order of increasing affinity, estimated by the global affinity constant (nKa) or partition coefficient (KD) was: caffeine < simazine < atrazine âˆ¼ propazine < benzophenone. The nKa (L mol-1) values ranged from (4.9 ± 0.3) × 102 for caffeine to (1.9 ± 0.3) × 103 for benzophenone, whereas KD (L kg-1) varied from 14 ± 1 to 56 ± 8 for the same compounds. SIGNIFICANCE AND NOVELTY: To our knowledge, this is the first paper demonstrating the use of a monolithic platform to immobilize supramolecular structures of humic acids exploiting immobilized metal affinity to comparatively evaluate their affinity towards emerging pollutants exploiting the concepts of high-performance affinity chromatography. The proposed approach needs only small amounts of humic acid, which is a relevant feature in preparing columns with humic substances isolated and purified from remote areas.

Empirical adsorption kinetics: comparing linear and nonlinear regression analysis emphasizing the need for high throughput analysis.

This paper evaluates linear and nonlinear regression analysis to describe the empirical adsorption kinetics using pseudo-first-order (PFO) and pseudo-second-order (PSO) models. These models have been used to characterize the performance of adsorbents for environmental remediation and environmental modeling. Data were simulated using the PFO and PSO models with 1, 2, and 5% noise levels and fitted by nonlinear and linearized PFO and PSO equations. Nonlinear regression analysis provided rate constants and adsorption capacities with better accuracy than linearization. Besides the correlation coefficient, Chi-square and residual plot analysis helped choose the proper model to describe the adsorbent efficiency and validate the results. Both models and the NLR fitting were employed to reevaluate data obtained in our research group, including the adsorption of Hg(II) on thiol-modified vermiculite, glyphosate on soils rich in aluminum and iron oxides, phosphate on Fe(III) polyhydroxy cations modified montmorillonite, and paraquat on soil and vermiculite. While fitting the simulated data indicates an unequivocal and correct kinetic model, fitting the experimental data is not straightforward, suggesting mixed models rule the adsorption and that a large number of data points, especially at the initial steps of adsorption, provided by high throughput analysis, help to improve the kinetic modeling.

Polymer monoliths for the concentration of viruses from environmental waters: A review.

Even at low concentrations in environmental waters, some viruses are highly infective, making them a threat to human health. They are the leading cause of waterborne enteric diseases. In agriculture, plant viruses in irrigation and runoff water threat the crops. The low concentrations pose a challenge to early contamination detection. Thus, concentrating the virus particles into a small volume may be mandatory to achieve reliable detection in molecular techniques. This paper reviews the organic monoliths developments and their applications to concentrate virus particles from waters (waste, surface, tap, sea, and irrigation waters). Free-radical polymerization and polyaddition reactions are the most common strategies to prepare the monoliths currently used for virus concentration. Here, the routes for preparing and functionalizing both methacrylate and epoxy-based monoliths will be shortly described, following a revision of their retention mechanisms and applications in the concentration of enteric and plant viruses in several kinds of waters.

Fast construction of polymer monolithic columns inside fluorinated ethylene propylene (FEP) tubes for separation of proteins by reversed-phase liquid chromatography.

This paper describes the preparation of polymer monolithic columns in the confines of fluorinated ethylene propylene (FEP) tubes. These tubes are cheap, chemically stable, and widely used in flow analysis laboratories. UV-initiated grafting with 5 wt% benzophenone in methanol for 1 h activated the internal surface walls, thus enabling the further covalent binding of ethylene glycol dimethacrylate (EDMA) from a 15 wt% solution in methanol, also via photografting. Both steps used 254 nm radiation under a potency of 120 mJ cm2. ATR-FTIR measurements revealed the presence of carbonyl, alkyl and vinyl groups in the functionalized FEP. The density of vinyl groups was high enough to firmly attach a poly(lauryl methacrylate-co-ethylene glycol dimethacrylate) monolith in 120 × 1.57 mm i.d. tubes, prepared via photopolymerization. The total preparation lasts less than 2-h. The columns were permeable, (1.58 ± 0.06) × 10-13 m2, providing reproducible chromatographic parameters of retention times, retention factor, selectivity, and resolution. The monoliths were stable at flow rates of 500 µL min-1, collapsing only at flow rates >700 µL min-1, a condition that increased the backpressure over 1000 psi (experiments at the room temperature). The separation of proteins by reversed-phase liquid chromatography demonstrated the efficiency of the columns. Determination of egg white proteins (ovalbumin and lysozyme) and myoglobin in spiked urine proved the applicability to the analysis of real samples.

Fe(III)-polyhydroxy cations supported onto K10 montmorillonite for removal of phosphate from waters.

Since phosphate is strongly related to eutrophication of environmental waters, several research groups quest for materials that can efficiently remove phosphate from wastewaters before it contaminates lakes and reservoirs. In the present work, a commercial clay mineral (K10 montmorillonite) modified with Fe3+ polyhydroxy cations was investigated as an adsorbent for phosphate. The incorporation of the polycations did not alter the main conformational characteristics of the montmorillonite, as verified by specific surface area measurements, X-ray diffractometry, FTIR, electron microscopy, and zeta potential titrations. On the other hand, the materials supporting Fe3+ polyhydroxy cations exhibited a significant enhancement of adsorption capacity, as determined by Langmuir-Freundlich isotherms, from 39 ± 2 to 104 ± 15 µmol g-1. The different ratios of OH- to Fe3+ did not affect the adsorption capacities. The adsorption kinetics was best described by the pseudo 2nd order model, approaching the equilibrium after 120 min of contact time. A variation of pH between 4.6 and 8.5 did not affect the adsorption percentages. The adsorption capacities increased with the increase of the ionic strength, thus suggesting that the formation of inner-sphere complexes prevails over electrostatic interactions as the adsorption mechanism. The materials removed phosphate from three polluted water samples having phosphate concentrations between 0.0919 and 1.211 mg L-1. The remaining phosphate concentration was below the limit of quantification of the analytical method (0.063 mg L-1 in P, or 2.0 µmol L-1). The presence of 10 mg L-1 humic of fulvic acid did not affect the performance of the materials. In conclusion, the modification of clay minerals with Fe3+ polyhydroxy cations is useful in producing low-cost adsorbents for phosphate.