RESUMEN
Characterization of variation of experimental results is achieved by repeating experiments. Frequently, results are averaged before data are analysed but that may not be the best practice because valuable information is then lost. Three other ways to analyze repetitions are: (1) each experiment is analyzed on its own (no pooling of data), (2) all experiments are analyzed together in one go (complete pooling), (3) data are analyzed together while allowing for similarities as well as differences in the result (partial pooling). Multilevel modeling uses partial pooling by partitioning variance over more than one level. Level 1 consists of the measurements themselves; higher levels consist of groups or clusters of measurements (repetitions, experiments at various temperatures, at various pH values, etc.) and parameters are analyzed both at the population and at the group/cluster level. The approach is applied to a case study in which heat-induced isothermal degradation of ascorbic acid was studied with 15 repetitions in an aqueous solution, making it a two-level study. The data were analyzed using averaging and complete pooling, complete pooling without averaging, no-pooling at all, and partial pooling. The kinetic model was established by letting the data decide about the order of the reaction, while this was compared to a model where the order was fixed at 1 (first-order model). Results show that both averaging with complete pooling, as well as complete pooling without averaging, strongly underestimate variation. The no-pooling technique overestimates variation, while partial pooling partitions variation over the levels and thus gives a better impression of the variation involved. The kinetics of ascorbic acid appear to be subject to strong variation when each experiment is considered separately because it is a compound that is very sensitive to all kinds of experimental conditions. With multilevel modeling it appeared to be possible to characterize the uncertainties involved much better than with single level modeling. A Bayesian analysis was performed, in which parameters are allowed to be variable, which is useful because multilevel modeling leads to characterization of variation of parameters. The Bayesian method allows to visualize the posterior distribution of parameters, thereby giving more insight in their behaviour. Also, a Bayesian analysis focuses more strongly on predictive accuracy of models, including multilevel models. The predictive accuracy of 4 models describing the same ascorbic acid data was compared and the multilevel model with reaction order estimated from the data performed by far the best in this regard. The pros and cons of multilevel modeling are discussed and it is concluded that multilevel modeling is to be preferred whenever the data allow to perform such an analysis.
Asunto(s)
Tecnología de Alimentos , Calor , Ácido Ascórbico/química , Teorema de Bayes , CinéticaRESUMEN
Variation observed in heat inactivation of Salmonella strains (data from Combase) was characterized using multilevel modeling with two case studies. One study concerned repetitions at one temperature, the other concerned isothermal experiments at various temperatures. Multilevel models characterize variation at various levels and handle dependencies in the data. The Weibull model was applied using Bayesian regression. The research question was how parameters varied with experimental conditions and how data can best be analyzed: no pooling (each experiment analyzed separately), complete pooling (all data analyzed together) or partial pooling (connecting the experiments while allowing for variation between experiments). In the first case study, level 1 consisted of the measurements, level 2 of the group of repetitions. While variation in the initial number parameter was low (set by the researchers), the Weibull shape factor varied for each repetition from 0.58-1.44, and the rate parameter from 0.006-0.074 h. With partial pooling variation was much less, with complete pooling variation was strongly underestimated. In the second case study, level 1 consisted of the measurements, level 2 of the group of repetitions per temperature experiment, level 3 of the cluster of various temperature experiments. The research question was how temperature affected the Weibull parameters. Variation in initial numbers was low (set by the researchers), the rate parameter was obviously affected by temperature, the estimate of the shape parameter depended on how the data were analyzed. With partial pooling, and one-step global modeling with a Bigelow-type model for the rate parameter, shape parameter variation was minimal. Model comparison based on prediction capacity of the various models was explored. The probability distribution of calculated decimal reduction times was much narrower using multilevel global modeling compared to the usual single level two-step approach. Multilevel modeling of microbial heat inactivation appears to be a suitable and powerful method to characterize and quantify variation at various levels. It handles possible dependencies in the data, and yields unbiased parameter estimates. The answer on the question "to pool or not to pool" depends on the goal of modeling, but if the goal is prediction, then partial pooling using multilevel modeling is the answer, provided that the experimental data allow that.
Asunto(s)
Análisis de Datos , Microbiología de Alimentos , Calor , Viabilidad Microbiana , Modelos Estadísticos , Salmonella , Teorema de Bayes , Recuento de Colonia Microbiana , Cinética , Salmonella/fisiologíaRESUMEN
Moderate intensity Pulsed Electric Fields (PEF) was studied for microbial inactivation as an alternative to high intensity PEF or to classical thermal pasteurization. The process is characterized by the application of electric pulses, allowing an increase of the product temperature by the ohmic heat generated by the pulses. A systematic evaluation of the effect of parameters electric field strength (E) and pulse width (τ) on the inactivation of Escherichia coli, Listeria monocytogenes, Lactobacillus plantarum, Salmonella Senftenberg and Saccharomyces cerevisiae in orange juice was carried out in a continuous flow system. A wide range of conditions was evaluated, and both E and τ were shown to be important in the efficacy to inactivate micro-organisms. Remarkably, PEF conditions at Eâ¯=â¯2.7â¯kV/cm and τâ¯=â¯15-1000⯵s showed to be more effective in microbial inactivation than at Eâ¯=â¯10â¯kV/cm and τâ¯=â¯2⯵s. Inactivation kinetics of the tested PEF conditions were compared to an equivalent thermal process to disentangle non-thermal effects (electroporation) from thermal effects responsible for the microbial inactivation. At standard high intensity PEF treatment a non-thermal inactivation at Eâ¯=â¯20â¯kV/cm and τâ¯=â¯2⯵s pulses was observed and attributed to electroporation. Non-thermal effects could also be resolved with moderate intensity PEF at Eâ¯=â¯2.7â¯kV/cm and pulse width between τâ¯=â¯15-1000⯵s. Microbial inactivation at these moderate intensity PEF conditions was studied in more detail at different pH and medium conductivity for E. coli and L. monocytogenes in watermelon juice and coconut water. Under moderate intensity PEF conditions the effectiveness of treatment was independent of pH for all evaluated matrices in the pH range of 3.8-6.0, whereas under high intensity PEF conditions the pH of the product is a critical factor for microbial inactivation. This suggests that the inactivation proceeds through a different mechanism at moderate intensity PEF, and speculations for this mechanism are presented. In conclusion, moderate intensity PEF conditions at Eâ¯=â¯2.7â¯kV/cm and pulse width of 15-1000⯵s has potential for industrial processing for the preservation of fruit juices and pH neutral liquid food products.
Asunto(s)
Electricidad , Microbiología de Alimentos , Conservación de Alimentos/métodos , Jugos de Frutas y Vegetales , Viabilidad Microbiana , Fenómenos Fisiológicos Bacterianos , Recuento de Colonia Microbiana , Calor , Concentración de Iones de Hidrógeno , Saccharomyces cerevisiae/fisiologíaRESUMEN
Application of mild (non)-thermal processing technologies have received considerable interest as alternative to thermal pasteurisation, because of its shorter holding time and lower temperature aiming for an improved product quality. To understand and develop these alternative technologies, like pulsed electric fields, a proper comparison between the conventional thermal and alternative process is necessary. Up to recent, no suitable models were available to predict the inactivation of micro-organisms by a thermal process at a chosen short holding time, due to non-linearity. The recently developed Gauss-Eyring model with two variables temperature and time has the properties to be a suitable model to apply for short holding times, and was tested for this purpose. Therefore, this study aims to validate if the Gauss-Eyring model can be used to describe non-linear isothermal (a fixed temperature with varying holding time) and isotime (a fixed holding time with varying temperature) thermal inactivation data, and if it is a suitable model to predict the thermal inactivation as a function of temperature for short holding times. Inactivation data of Escherichia coli, Listeria monocytogenes, Lactobacillus plantarum, Salmonella Senftenberg and Saccharomyces cerevisiae in orange juice were collected via isothermal and isotime inactivation kinetics. Survival of the tested micro-organisms was modelled with the Gauss-Eyring model, which contains three parameters σ, Tr and Z. The transition of 'no inactivation' to 'inactivation' (i.e. the 'shoulder' in inactivation curves) can be characterised as the temperature-time (T,t) combination where T=Tr-Z·log10(t), with Tr as the reference temperature defined for 1s treatment, Z as the temperature needed for a 10-fold increase of decrease of the holding time t, and σ as the temperature width of the distribution. The Gauss-Eyring model fitted well to the experimental data, and revealed different sensitivity for the tested micro-organisms. Based on the parameter estimations, survival curves for the desired short holding times were predicted.
Asunto(s)
Escherichia coli/crecimiento & desarrollo , Manipulación de Alimentos/métodos , Jugos de Frutas y Vegetales/microbiología , Listeria monocytogenes/crecimiento & desarrollo , Recuento de Colonia Microbiana , Manipulación de Alimentos/instrumentación , Microbiología de Alimentos , Calor , Cinética , Modelos Biológicos , Factores de TiempoRESUMEN
A new primary model has been developed, using Gaussian distributed populations and Eyrings rate constant for the transition state, to describe inactivation kinetics of enzymes and micro-organisms subjected to heat and chemical treatment. The inactivation of both enzymes and micro-organisms could be associated with the irreversible transition to an inactivated state, as suggested by the Lumry-Eyring model for protein denaturation and enzyme inactivation. The characteristic inactivation model parameters, standard activation enthalpy and entropy, are directly related to the reference temperature and Z-value commonly used for kinetic analysis in food microbiology. An essential feature of the kinetic model is that its parameters, and hence the transition temperature, are treated as stochastic variables. The characteristic line shape of the primary model is the log-normal distribution. The performance of the model was validated, using literature data for enzyme and microbial inactivation over a wide range of temperature and pH.
Asunto(s)
Termodinámica , Calor , Cinética , Viabilidad Microbiana , Desnaturalización Proteica , TemperaturaRESUMEN
This study investigated acrylamide and 5-hydroxymethylfurfural (HMF) formation during biscuit baking. Four types of wheat flour with different molar ratios of total fructose and glucose to asparagine were investigated. Nevertheless, the molar ratio in all four biscuit doughs exceeded one after proofing due to enzyme action. Data obtained after baking were used to develop a mechanistic model, based on the asparagine-related pathway, for acrylamide and HMF formation in the four baked biscuit types. Asparagine reacted with fructose to form a Schiff base before decarboxylation to produce acrylamide without Amadori rearrangement product and sugar fragmentation. Fructose contributed considerably to acrylamide formation and to HMF formation via caramelization in all four biscuit types. No clear correlation was found between acrylamide and HMF in baked biscuits, nor between asparagine and the sum of glucose and fructose concentrations in the wheat flour.
Asunto(s)
Acrilamida/química , Asparagina/química , Harina/análisis , Manipulación de Alimentos , Furaldehído/análogos & derivados , Acrilamida/análisis , Fructosa/química , Furaldehído/análisis , Furaldehído/química , Glucosa/química , Calor , Cinética , Triticum/químicaRESUMEN
Pulsed electrical field (PEF) technology offers an alternative to thermal pasteurisation of high-acid fruit juices, by extending the shelf life of food products, while retaining its fresh taste and nutritional value. Substantial research has been performed on the effect of electrical field strength on the inactivation kinetics of spoilage and pathogenic micro-organisms and on the outgrowth of spoilage micro-organisms during shelf life. However, studies on the effect of electrical field strength on the inactivation and outgrowth of surviving populations during shelf life are missing. In this study, we assessed the influence of electrical field strength applied by PEF processing and storage temperature on the outgrowth of surviving yeast and mould populations naturally present in fresh fruit smoothie in time. Therefore, an apple-strawberry-banana smoothie was treated in a continuous-flow PEF system (130L/h), using similar inlet and outlet conditions (preheating temperature 41°C, maximum temperature 58°C) to assure that the amount of energy across the different conditions was kept constant. Smoothies treated with variable electrical field strengths (13.5, 17.0, 20.0 and 24.0kV/cm) were compared to smoothies without treatment for outgrowth of yeasts and moulds. Outgrowth of yeasts and moulds stored at 4°C and 7°C was analysed by plating and visual observation and yeast growth was modelled using the modified logistic growth model (Zwietering model). Results showed that the intensity of the electrical field strength had an influence on the degree of inactivation of yeast cells, resulting in a faster outgrowth over time at lower electrical field strength. Outgrowth of moulds over time was not affected by the intensity of the electrical field strength used. Application of PEF introduces a trade-off between type of spoilage: in untreated smoothie yeasts lead to spoilage after 8days when stored at 4 or 7°C, whereas in PEF treated smoothie yeasts were (partly) inactivated and provided outgrowth opportunities for moulds, which led to spoilage by moulds after 14days (7°C) or 18days (4°C).
Asunto(s)
Conservación de Alimentos/métodos , Fragaria/microbiología , Frutas/microbiología , Malus/microbiología , Musa/microbiología , Levaduras/crecimiento & desarrollo , Electricidad , Jugos de Frutas y Vegetales/microbiología , Pasteurización/métodos , TemperaturaRESUMEN
Lupinus mutabilis has protein (32.0-52.6 g/100 g dry weight) and lipid (13.0-24.6 g/100 g dry weight) contents similar to soya bean (Glycine max). The Ω3, Ω6, and Ω9 contents are 1.9-3.0, 26.5-39.6, and 41.2-56.2 g/100 g lipid, respectively. Lupins can be used to fortify the protein content of pasta, bread, biscuits, salads, hamburgers, sausages, and can substitute milk and soya bean. Specific lupin protein concentrates or isolates display protein solubility (>90%), water-absorption capacity (4.5 g/g dry weight), oil-absorption capacity (3.98 g/g), emulsifying capacity (2000 mL of oil/g), emulsifying stability (100%, 60 hours), foaming capacity (2083%), foaming stability (78.8%, 36 hours), and least gelation concentration (6%), which are of industrial interest. Lupins contain bitter alkaloids. Preliminary studies on their toxicity suggest as lethal acute dose for infants and children 10 mg/kg bw and for adults 25 mg/kg bw. However, alkaloids can also have medical use for their hypocholesterolemic, antiarrhythmic, and immunosuppressive activity. Bitter lupins can be detoxified by biological, chemical, or aqueous processes. The shortest debittering process requires one hour. This review presents the nutritional composition of lupins, their uses (as food, medicine, and functional protein isolates), toxicology, and debittering process scenarios. It critically evaluates the data, infers conclusions, and makes suggestions for future research.
Asunto(s)
Lupinus/química , Lupinus/toxicidad , Semillas/química , Alcaloides/análisis , Proteínas en la Dieta/administración & dosificación , Manipulación de Alimentos/métodos , Alimentos Fortificados , Humanos , Lípidos/análisis , Micronutrientes/análisis , Valor Nutritivo , Proteínas de Plantas/análisis , Proteínas de Plantas/química , GustoRESUMEN
Mung bean (Vigna radiata (L.) R. Wilczek) has been intensively researched; scattered data are available on various properties. Data on physical, chemical, food processing, and nutritional properties were collected for whole mung bean grains and reviewed to assess the crop's potential as food and to set research priorities. Results show that mung bean is a rich source of protein (14.6-33.0 g/100 g) and iron (5.9-7.6 mg/100 g). Grain color is correlated with compounds like polyphenols and carotenoids, while grain hardness is associated with fiber content. Physical properties like grain dimensions, sphericity, porosity, bulk, and true density are related to moisture content. Anti-nutrients are phytic acid, tannins, hemagglutinins, and polyphenols. Reported nutrient contents vary greatly, the causes of which are not well understood. Grain size and color have been associated with different regions and were used by plant breeders for selection purposes. Analytical methods require more accuracy and precision to distinguish biological variation from analytical variation. Research on nutrient digestibility, food processing properties, and bioavailability is needed. Furthermore, the effects of storage and processing on nutrients and food processing properties are required to enable optimization of processing steps, for better mung bean food quality and process efficiency.
Asunto(s)
Grano Comestible , Manipulación de Alimentos/métodos , Valor Nutritivo , Disponibilidad Biológica , Carotenoides , Fibras de la Dieta , Proteínas en la Dieta , Hierro de la Dieta , Ácido Fítico , TaninosRESUMEN
Broccoli belongs to the Brassicaceae plant family consisting of widely eaten vegetables containing high concentrations of glucosinolates. Enzymatic hydrolysis of glucosinolates by endogenous myrosinase (MYR) can form isothiocyanates with health-promoting activities. The effect of water content (WC) and temperature on MYR inactivation in broccoli was investigated. Broccoli was freeze dried obtaining batches with WC between 10% and 90% (aw from 0.10 to 0.96). These samples were incubated for various times at different temperatures (40-70°C) and MYR activity was measured. The initial MYR inactivation rates were estimated by the first-order reaction kinetic model. MYR inactivation rate constants were lower in the driest samples (10% WC) at all studied temperatures. Samples with 67% and 90% WC showed initial inactivation rate constants all in the same order of magnitude. Samples with 31% WC showed intermediate initial inactivation rate constants. These results are useful to optimise the conditions of drying processes to produce dried broccoli with optimal MYR retention for human health.
Asunto(s)
Brassica/enzimología , Glicósido Hidrolasas/metabolismo , Agua/análisis , Estabilidad de Enzimas , Glicósido Hidrolasas/antagonistas & inhibidores , Glicósido Hidrolasas/química , Humanos , Cinética , TemperaturaRESUMEN
Pulsed electrical field (PEF) technology can be used for the inactivation of micro-organisms and therefore for preservation of food products. It is a mild technology compared to thermal pasteurization because a lower temperature is used during processing, leading to a better retention of the quality. In this study, pathogenic and spoilage micro-organisms relevant in refrigerated fruit juices were studied to determine the impact of process parameters and juice composition on the effectiveness of the PEF process to inactivate the micro-organisms. Experiments were performed using a continuous-flow PEF system at an electrical field strength of 20 kV/cm with variable frequencies to evaluate the inactivation of Salmonella Panama, Escherichia coli, Listeria monocytogenes and Saccharomyces cerevisiae in apple, orange and watermelon juices. Kinetic data showed that under the same conditions, S. cerevisiae was the most sensitive micro-organism, followed by S. Panama and E. coli, which displayed comparable inactivation kinetics. L. monocytogenes was the most resistant micro-organism towards the treatment conditions tested. A synergistic effect between temperature and electric pulses was observed at inlet temperatures above 35 °C, hence less energy for inactivation was required at higher temperatures. Different juice matrices resulted in a different degree of inactivation, predominantly determined by pH. The survival curves were nonlinear and could satisfactorily be modeled with the Weibull model.
Asunto(s)
Fenómenos Fisiológicos Bacterianos , Bebidas/microbiología , Saccharomyces cerevisiae/fisiología , Temperatura , Bacterias/crecimiento & desarrollo , Escherichia coli/crecimiento & desarrollo , Escherichia coli/fisiología , Frutas/microbiología , Concentración de Iones de Hidrógeno , Listeria monocytogenes/crecimiento & desarrollo , Listeria monocytogenes/fisiología , Modelos Biológicos , Saccharomyces cerevisiae/genética , Salmonella/crecimiento & desarrollo , Salmonella/fisiología , Análisis de SupervivenciaRESUMEN
BACKGROUND: Exposure to palatable food odors influences appetite responses, either promoting or inhibiting food intake. Possibly, food odors are appetizing after a short exposure (of circa 1-3 min), but become satiating over time (circa 10-20 min). OBJECTIVE: To investigate the effect of odor exposure on general appetite and sensory-specific appetite (SSA) over time. DESIGN: In a cross-over study, 21 unrestrained women (age: 18-45 years; BMI: 18.5-25 kg m(-2)) were exposed for 20 min to eight different odor types: five food odors, two nonfood odors and no-odor. All odors were distributed in a test room at suprathreshold levels. General appetite, SSA and salivation were measured over time. RESULTS: All food odors significantly increased general appetite and SSA, compared with the no-odor condition. The nonfood odors decreased general appetite. All effects did not change over time during odor exposure. Savory odors increased the appetite for savory foods, but decreased appetite for sweet foods, and vice versa after exposure to sweet odors. Neither food odors nor nonfood odors affected salivation. CONCLUSIONS: Palatable food odors were appetizing during and after odor exposure and did not become satiating over a 20-min period. Food odors had a large impact on SSA and a small impact on general appetite. Moreover, exposure to food odors increased the appetite for congruent foods, but decreased the appetite for incongruent foods. It may be hypothesized that, once the body is prepared for intake of a certain food with a particular macronutrient composition, it is unfavorable to consume foods that are very different from the cued food.
Asunto(s)
Apetito/fisiología , Ingestión de Alimentos/fisiología , Odorantes , Salivación/fisiología , Saciedad/fisiología , Adolescente , Adulto , Análisis de Varianza , Conducta de Elección , Estudios Cruzados , Señales (Psicología) , Conducta Alimentaria , Femenino , Preferencias Alimentarias/fisiología , Humanos , Persona de Mediana Edad , Odorantes/análisis , Factores de TiempoRESUMEN
This review paper discusses opportunities for intelligent packaging for monitoring directly or indirectly quality attributes of perishable packaged foods. The possible roles of intelligent packaging as a tool in supply chain management are discussed as well as the barriers to implement this kind of technology in commercial applications. Cases on pasteurized milk and fresh cod fillets illustrate the application of different intelligent packaging concepts to monitor and estimate quality attributes. Conditions influencing quality (e.g., temperature-time) can be monitored to predict the quality of perishable products when the initial quality is known and rather constant (e.g., pasteurized milk). Products with a highly variable initial quality (e.g., fresh fish) require sensors monitoring compounds correlated with quality.
Asunto(s)
Contaminación de Alimentos/prevención & control , Embalaje de Alimentos/métodos , Conservación de Alimentos/métodos , Animales , Técnicas Biosensibles , Peces , Microbiología de Alimentos , Carne/análisis , Carne/microbiología , Leche/química , Leche/microbiología , Pasteurización/métodos , TemperaturaRESUMEN
The objective of this study was to obtain insight into the effect of frying instructions on food handlers' control decisions in restaurants and to investigate the impact of control decisions on the variation and concentration of acrylamide in French fries. The concentrations of acrylamide and reducing sugars were analyzed, the frying temperature and time were measured, and thawing practices were observed. The results obtained before and after instructions were provided to the food handlers were compared for restaurants as a group and for each restaurant. Frying instructions supported food handlers' decisions to start frying when the oil temperature reached 175°C; all handlers started frying at the correct temperature. However, the effect of the instructions on the food handlers' decisions for frying time differed; most handlers increased the frying time beyond 240 s to achieve crispier French fries with a final color dictated by their preference. Providing instructions did not result in a significant difference in the mean concentration of acrylamide in French fries for the restaurants as a group. However, data analyzed for each restaurant revealed that when food handlers properly followed the instructions, the mean concentration of acrylamide was significantly lower (169 µg/kg) than that before instructions were provided (1,517 µg/kg). When food handlers did not complying with the frying instructions, mean acrylamide concentrations were even higher than those before instructions were provided. Two different strategies were developed to overcome the noncompliant behavior of food handlers: establishing requirements for the features of commercial fryers and strict monitoring of compliance with instructions.
Asunto(s)
Acrilamida/química , Culinaria/métodos , Contaminación de Alimentos/análisis , Solanum tuberosum/química , Acrilamida/análisis , Carbohidratos/química , Contaminación de Alimentos/prevención & control , Manipulación de Alimentos/métodos , Inocuidad de los Alimentos , Calor , Humanos , Restaurantes , Factores de TiempoRESUMEN
The objective of this study was to obtain insight into the actual effectiveness of lowering reducing sugars concentration in par-fried potato strips on the concentration and variation of acrylamide in French fries prepared in real-life situations in food service establishments. Acrylamide, frying time, frying temperature, and reducing sugars were measured and characteristics of fryers were recorded. Data showed that the use of par-fried potato strips with lower concentrations of reducing sugars than the commonly used potato strips was an effective measure to reduce acrylamide concentrations in French fries prepared under standardised frying conditions. However, there was still large variation in the acrylamide concentrations in French fries, although the variation in reducing sugars concentrations in low and normal types of par-fried potato strips was very small and the frying conditions were similar. Factors that could affect the temperature-time profile of frying oil were discussed, such as setting a lower frying temperature at the end than at the start of frying, product/oil ratio and thawing practice. These need to be controlled in daily practice to reduce variation in acrylamide.
Asunto(s)
Acrilamida/química , Carbohidratos/química , Culinaria/métodos , Servicios de Alimentación/normas , Solanum tuberosum/química , Inocuidad de los Alimentos , Oxidación-Reducción , Tubérculos de la Planta/químicaRESUMEN
Acrylamide is a probable human carcinogen, and its presence in a range of fried and oven-cooked foods has raised considerable health concern world-wide. Dietary intake studies observed significant variations in acrylamide concentrations, which complicate risk assessment and the establishment of effective control measures. The objective of this study was to obtain an insight into the actual variation in acrylamide concentrations in French fries prepared under typical conditions in a food service establishment (FSE). Besides acrylamide, frying time, frying temperature, and reducing sugars were measured and the actual practices at receiving, thawing and frying during French fries preparation were observed and recorded. The variation in the actual frying temperature contributed most to the variation in acrylamide concentrations, followed by the variation in actual frying time; no obvious effect of reducing sugars was found. The lack of standardised control of frying temperature and frying time (due to inadequate frying equipment) and the variable practices of food handlers seem to contribute most to the large variation and high acrylamide concentrations in French fries prepared in a restaurant type of FSE as compared to chain fast-food services, and institutional caterers. The obtained insights in this study can be used to develop dedicated control measures in FSE, which may contribute to a sustainable reduction in the acrylamide intake.
Asunto(s)
Acrilamida/química , Culinaria/métodos , Grasas de la Dieta/análisis , Solanum tuberosum/química , Acrilamida/análisis , Manipulación de Alimentos , Servicios de Alimentación , Calor , HumanosRESUMEN
In Africa, nutrient intake deficiencies are widespread. We, therefore, investigated the potential contribution of cowpea dishes to the ingestion of several macro- and micronutrients. Processors and consumers were interviewed and cowpea dishes analyzed. Energy, protein, iron, zinc, and calcium contents ranged from 1647 to 2570 kJ, 10 to 25 g, 1 to 35 mg, 1.5 to 3.0 mg, 38 to 380 mg per 100 g d.w., respectively. The iron and calcium contents were highest in dishes containing leaves. The consumption of these dishes should be promoted along with research on how to further decrease the associated antinutritional factors of traditional cowpea dishes.
Asunto(s)
Dieta , Ingestión de Energía , Fabaceae/química , Manipulación de Alimentos/métodos , Frutas/química , Desnutrición/prevención & control , África/epidemiología , Calcio/análisis , Calcio de la Dieta/análisis , Proteínas en la Dieta/análisis , Humanos , Hierro de la Dieta/análisis , Desnutrición/epidemiología , Valor Nutritivo , Hojas de la Planta , Prevalencia , Zinc/análisisRESUMEN
Calcium ion selective electrode (Ca-ISE) was found to underestimate the actual Ca2+ ion activity in simulated milk ultrafiltrate (SMUF) and milk. It is shown that the ionic compositional difference between conventional calibration solutions and milk type samples had a significant effect on the single Ca2+ activity coefficient, which generates the erroneous estimate of Ca2+ activities in SMUF and milk. This study tests new standards with ionic profiles similar to SMUF, aiming at the reduction of the errors generated by the compositional difference between conventional standards and milk samples. As a result, the new standards showed a significant improvement in the accuracy of Ca2+ activity and Ca2+ activity coefficient over the conventional standards. The systematic error is reduced from 20% to 5% for SMUF and from 44% to 15% for milk. In addition, the new standards generate liquid junction potentials that are practically insignificant.
Asunto(s)
Disciplinas de las Ciencias Biológicas/educación , Educación de Postgrado , Tecnología de Alimentos/educación , Ciencias de la Nutrición/educación , Universidades/historia , Universidades/organización & administración , Historia del Siglo XX , Historia del Siglo XXI , Países Bajos , Universidades/economíaRESUMEN
Forest food resources contribute significantly to food supply in areas where they grow. Three fermented baobab foods were studied: Dikouanyouri (from seeds, pH = 6.5); Tayohounta (from seed kernels, pH = 7), and Mutchayan (from baobab pulp and sorghum, pH = 4.2). Bacillus spp. (8.5 and 9.5 Log cfu /g) and lactic acid bacteria (8.9 and 8.4 Log cfu /g,) dominate in Dikouanyouri and Tayohounta, respectively. In Mutchayan, lactic acid bacteria (8.1 Log cfu/g) and yeasts (7.2 Log cfu/g) predominated. The arbitrary index of protein cleavage increases from 2.3% (unfermented products) to 13.7% in Dikouanyouri and 21.3% in Tayohounta, indicating significant protein degradation. Mutchayan is the most frequently consumed product.