Spatial confinement: An effective strategy to improve H2O and SO2 resistance of the expandable graphite-modified TiO2-supported Pt nanocatalysts for CO oxidation.

The expandable graphite (EG) modified TiO2 nanocomposites were prepared by the high shear method using the TiO2 nanoparticles (NPs) and EG as precursors, in which the amount of EG doped in TiO2 was 10 wt.%. Followed by the impregnation method, adjusting the pH of the solution to 10, and using the electrostatic adsorption to achieve spatial confinement, the Pt elements were mainly distributed on the exposed TiO2, thus generating the Pt/10EG-TiO2-10 catalyst. The best CO oxidation activity with the excellent resistance to H2O and SO2 was obtained over the Pt/10EG-TiO2-10 catalyst: CO conversion after 36 hr of the reaction was ca. 85% under the harsh condition of 10 vol.% H2O and 100 ppm SO2 at a high gaseous hourly space velocity (GHSV) of 400,000 hr-1. Physicochemical properties of the catalysts were characterized by various techniques. The results showed that the electrostatic adsorption, which riveted the Pt elements mainly on the exposed TiO2 of the support surface, reduced the dispersion of Pt NPs on EG and achieved the effective dispersion of Pt NPs, hence significantly improving CO oxidation activity over the Pt/10EG-TiO2-10 catalyst. The 10 wt.% EG doped in TiO2 caused the TiO2 support to form a more hydrophobic surface, which reduced the adsorption of H2O and SO2 on the catalyst, greatly inhibited deposition of the TiOSO4 and formation of the PtSO4 species as well as suppressed the oxidation of SO2, thus resulting in an improvement in the resistance to H2O and SO2 of the Pt/10EG-TiO2-10 catalyst.

Reactivity of Atomic Oxygen Radical Anions in Metal Oxide Clusters.

Atomic oxygen radical anion (O•-) represents an important type of reactive centre that exists in both chemical and biological systems. Gas-phase atomic clusters can be studied under isolated and well controlled conditions. Studies of O•--containing clusters in the gas-phase provide a unique strategy to interpret the chemistry of O•- radicals at a strictly molecular level. This review summarizes the research progresses made since 2013 for the reactivity of O•- radicals in the atomically precise metal oxide clusters including negatively charged, nanosized, and neutral heteronuclear clusters benefitting from the development of advanced experimental techniques. New electronic and geometric factors to control the reactivity and product selectivity of O•- radicals under dark and photo-irradiation conditions have been revealed. The detailed mechanisms of O•- generation have been discussed for the reaction systems of nanosized and heteroatom-doped metal oxide clusters. The catalytic reactions mediated by the O•- radicals in metal clusters have also been successfully established and the microscopic mechanisms about the dynamic generation and depletion of O•- radicals have been clearly understood. The studies of O•- containing metal oxide clusters in the gas-phase provided new insights into the chemistry of reactive oxygen species in related condensed-phase systems.

Enhancing the Performance of BaxMnO3 (x = 1, 0.9, 0.8 and 0.7) Perovskites as Catalysts for CO Oxidation by Decreasing the Ba Content.

Mixed oxides featuring perovskite-type structures (ABO3) offer promising catalytic properties for applications focused on the control of atmospheric pollution. In this work, a series of BaxMnO3 (x = 1, 0.9, 0.8 and 0.7) samples have been synthesized, characterized and tested as catalysts for CO oxidation reaction in conditions close to that found in the exhausts of last-generation automotive internal combustion engines. All samples were observed to be active as catalysts for CO oxidation during CO-TPRe tests, with Ba0.7MnO3 (B0.7M) being the most active one, as it presents the highest amount of oxygen vacancies (which act as active sites for CO oxidation) and Mn (IV), which features the highest levels of reducibility and the best redox properties. B0.7M has also showcased a high stability during reactions at 300 °C, even though a slightly lower CO conversion is achieved during the second consecutive reaction cycle. This performance appears to be related to the decrease in the Mn (IV)/Mn (III) ratio.

Unveiling the Promoting Mechanism of H2 Activation on CuFeOx Catalyst for Low-Temperature CO Oxidation.

The effect of H2 activation on the performance of CuFeOx catalyst for low-temperature CO oxidation was investigated. The characterizations of XRD, XPS, H2-TPR, O2-TPD, and in situ DRIFTS were employed to establish the relationship between physicochemical property and catalytic activity. The results showed that the CuFeOx catalyst activated with H2 at 100 °C displayed higher performance, which achieved 99.6% CO conversion at 175 °C. In addition, the H2 activation promoted the generation of Fe2+ species, and more oxygen vacancy could be formation with higher concentration of Oα species, which improved the migration rate of oxygen species in the reaction process. Furthermore, the reducibility of the catalyst was enhanced significantly, which increased the low-temperature activity. Moreover, the in situ DRIFTS experiments revealed that the reaction pathway of CO oxidation followed MvK mechanism at low temperature (<175 °C), and both MvK and L-H mechanism was involved at high temperature. The Cu+-CO and carbonate species were the main reactive intermediates, and the H2 activation increased the concentration of Cu+ species and accelerated the decomposition carbonate species, thus improving the catalytic performance effectively.

The Surface/Interface Modulation of Platinum Group Metal (PGM)-Free Catalysts for VOCs and CO Catalytic Oxidation.

Effective management of volatile organic compounds (VOCs) and carbon monoxide (CO) is critical to human health and the ecological environment. Catalytic oxidation is one of the most promising technologies for achieving efficient VOCs and CO emission control. Platinum group metal (PGM)-free catalysts are recently receiving sustainable attention in catalyzing VOCs and CO removal due to their low cost, superior catalytic activity, and excellent stability, but PGM-free catalysts face challenges in low-temperature catalytic efficiency. In this mini-review, starting with discussing the catalytic mechanism of VOCs and CO oxidation, we summarize the surface/interface modulation strategies of PGM-free catalysts to promote oxygen and VOCs/CO molecule activation for enhanced low-temperature oxidation activity, including oxygen vacancy engineering, heteroatom doping, surface acidity modification, and active interface construction. We highlight the currently remaining challenges and prospects of advanced PGM-free catalyst development for highly efficient VOCs and CO emission control in practical applications.

Highly efficient Rh-doped MnO2 nanocatalysts for complete elimination of CO at room temperature.

Obliteration of carbon monoxide is significant due to its hazardous effect on human health and potential application in different fields. Catalytic CO oxidation at lower temperature is the most convenient method to diminish the toxicity of CO. The low-cost catalysts which are exhibiting higher activity at lower temperature with good stability are in demand. The nanosized Rh-doped MnO2 catalysts have been prepared by dextrose-assisted co-precipitation method. Catalytic CO oxidation reaction was carried out over these prepared nanocatalysts under environmentally suitable conditions. XRD confirms the phase formation of prepared catalysts. These samples exhibit rod-like morphology with thickness of rods of less than 10 nm which is substantiated from electron microscopy images. XPS data reveals the oxidation state of Mn (+ 4) and Rh (+ 3). These catalysts are highly active for CO oxidation reaction at lower temperature, and one showed complete CO conversion at room temperature. The time-on-stream studies revealed that these catalysts are highly stable for CO oxidation for several hours. These catalysts are decidedly stable in moist condition and also showed higher activity in the presence of moisture, indicating participation of moisture in the oxidation reaction at above room temperatures.

Capturing Catalyst Strain Dynamics during Operando CO Oxidation.

Understanding the strain dynamic behavior of catalysts is crucial for the development of cost-effective, efficient, stable, and long-lasting catalysts. Using time-resolved Bragg coherent diffraction imaging at the fourth generation Extremely Brilliant Source of the European Synchrotron (ESRF-EBS), we achieved subsecond time resolution during operando chemical reactions. Upon investigation of Pt nanoparticles during CO oxidation, the three-dimensional strain profile highlights significant changes in the surface and subsurface regions, where localized strain is probed along the [111] direction. Notably, a rapid increase in tensile strain was observed at the top and bottom Pt {111} facets during CO adsorption. Moreover, we detected oscillatory strain changes (6.4 s period) linked to CO adsorption during oxidation, where a time resolution of 0.25 s was achieved. This approach allows for the study of adsorption dynamics of catalytic nanomaterials at the single-particle level under operando conditions, which provides insight into nanoscale catalytic mechanisms.

Realizing the high loading amount of active Cu on Al2O3 to boost its CO catalytic oxidation.

Catalytic oxidation of carbon monoxide (CO) by Cu/Al2O3 has garnered increasing interest in recent years due to its promising application prospects. Numerous investigations conducted on the Cu/Al2O3 system, but its catalytic performance for CO oxidation is still not as promising as that of precious metal catalysts. Increasing the loading amount of the active Cu on Al2O3 surface is a feasible method for improving its activity. However, with the increase of Cu loading, the agglomeration and enlargement of Cu particles is inevitable, which reduces the active Cu amount. Therefore, the utilization rate of Cu atoms is not high and the catalytic performance often can not further rise. Enhancing active Cu loading amount as high as possible is a prerequisite to further enlarge the activity of Cu/Al2O3 catalyst. Herein, self-synthesized Al2O3 nanofibers (Al2O3-nf) with high specific surface area and abundant penta-coordinated aluminum (AlV) are used as the support to maximize the Cu loading amount by chemical vapor deposition (CVD). And commercially available α-Al2O3 is used for comparative experiment. The high specific surface area could make Cu high dispersion on Al2O3, even at 20 wt% Cu loads, which is beneficial to high concentration load of active Cu. The catalytic activity of Cu/Al2O3-nf-CVD gradually increases with the increase of Cu loading from 2 wt% to 20 wt%, exhibiting a clear linear correlation with the surface content of Cu0 on the catalyst. Meanwhile, this result confirms that Cu0 plays a crucial role in CO oxidation of Cu/Al2O3. However, commercial α-Al2O3 reaches its highest activity when the Cu load is 5%, and then its activity begins to decrease due to the agglomeration of particles. Moreover, Cu/Al2O3-nf-CVD also exhibits remarkable thermal stability for CO oxidation. This work highlights a new strategy to synthesis of high Cu loading amount, high activity and thermostable Cu/Al2O3 catalyst for low-temperature oxidation of CO.

Graphene/MoS2-assisted alum sludge electrode induces selective oxidation for organophosphorus pesticides degradation: Co-oxidation and detoxification mechanism.

Designing an electrode that can generate abundant free radicals and 1O2, which can effectively degrade and detoxify organophosphorus pesticides (OPPs) through a co-oxidation pathway, is important. In this study, we prepared a electrode GO/MoS2@AS by supporting MoS2 on alum sludge (AS) under graphene oxide (GO) nanoconfinement. The results show that the dominant role of 1O2 at the cathode and •OHads at the anode for degradation, in addition to the involvement of 1O2 in the cathodic degradation mechanism, can be attributed to the abundant precursor •O2- and H2O2. Furthermore, calculations using density functional theory and toxicity prediction of products show that the energy (∆E) requirements of •OHfree to break the C-O bond of the pyridine ring and phosphate group are higher than that required for 1O2, and this non-radical oxidation plays a key role in detoxification. In contrast, accelerating ring opening and oxidation processes are attributed to radical oxidation. Above all, the cathodic detoxification is more effective than anodic detoxification. Three prevalent OPPs, chlorpyrifos, glyphosate, and trichlorfon, were degraded in the GO/MoS2@AS system by over 90 %, with mineralization rates of 76.66 %, 85.46 %, and 82.18 %, respectively. This study provides insights into the co-oxidation degradation and detoxification mechanism mediated by 1O2 and •OHfree.

The redistribution process of As(â ¢) and Fe(â ¡) caused by As/Fe ratio, organic matter, and co-existing ions: Co-precipitation and co-oxidation.

The contamination of arsenic (As) in aqueous environments has drawn widespread attention, and iron compounds may largely alter the migration ability of As. However, the stability of As(III) in Fe-As system with the intervention of organic matter (OM) remains unclear. Herein, we had explored the co-precipitation and co-oxidation processes of As-Fe system by using batch experiments combined with Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) in this research. The precipitation quantity of As(III) increased (28.85-92.41 %) when the As/Fe ratio decreased, and increased (24.20-64.20 %) with pH increased. The main active substance for oxidizing As(III) was H2O2, which was produced in the As-Fe system. FTIR and XPS revealed that As(III) was first oxidized in neutral, and then absorbed and enteredthe interior of Fe(OH)3 colloids. But under alkaline conditions, As(III) was adsorbed by Fe (Oxyhydr) oxides firstly, and then oxidized. The intervention of OM would inhibit the redistribution process of As(III) in aqueous environments. Functional groups and unsaturation of the carbon chain were the dominant factors that affected the precipitation and oxidation processes of As(III), respectively. Co-existing ions (especially PO43-) also signally affected the precipitation quantity of As(Ⅲ) in the system and, when coexisting with OM, could exacerbate this process. The influence of co-existing ions on the redistributive process of As(III) in the As-Fe system with/without OM were as follows: PO43- > SO42- > mixed ions > SiO32-. Moreover, high concentration of OM and PO43- might lead to morphological alterations of As, acting as a threat to aqueous environments. In summary, the present findings were to further understand and appreciate the changes of As toxicity in the aqueous environments. Particularly, the coexistence of OM and As can potentially increase the risk to drinking water safety.

Formation mechanism of quinoa protein hydrolysate-EGCG complexes at different pH conditions and its effect on the protein hydrolysate-lipid co-oxidation in emulsions.

This study aimed to investigate the interaction, structure, antioxidant, and emulsification properties of quinoa protein hydrolysate (QPH) complexes formed with (-)-epigallocatechin gallate (EGCG) at pH 3.0 and 7.0. Additionally, the effect of pH conditions and EGCG complexation on protein hydrolysate-lipid co-oxidation in QPH emulsions was explored. The results indicated that QPH primarily interacted with EGCG through hydrophobic interactions and hydrogen bonds. This interaction led to alterations in the secondary structure of QPH, as well as a decrease in surface hydrophobicity and free SH content. Notably, the binding affinity between QPH and EGCG was observed to be higher at pH 7.0 compared to pH 3.0. Consequently, QPH-EGCG complexes exhibited more significant enhancement in antioxidant and emulsification properties at pH 7.0 than pH 3.0. The pH level also influenced the droplet size, ζ-potential, and interfacial composition of emulsions formed by QPH and QPH-EGCG complexes. Compared to QPH stabilized emulsions, QPH-EGCG stabilized emulsions were more capable of mitigating destabilization during storage and displayed fewer lipid oxidation products, carbonyl generation, and sulfhydryl groups and fluorescence loss, which implied better oxidative stability of the emulsions. Furthermore, the QPH-EGCG complexes formed at pH 7.0 exhibited better inhibition of protein hydrolysate-lipid co-oxidation. Overall, these findings provide valuable insights into the potential application of QPH and its complexes with EGCG in food processing systems.

CO Oxidation Mechanism of Silver-Substituted Mo/Cu CO-Dehydrogenase - Analogies and Differences to the Native Enzyme.

The aerobic oxidation of carbon monoxide to carbon dioxide is catalysed by the Mo/Cu-containing CO-dehydrogenase enzyme in the soil bacterium Oligotropha carboxidovorans, enabling the organism to grow on the small gas molecule as carbon and energy source. It was shown experimentally that silver can be substituted for copper in the active site of Mo/Cu CODH to yield a functional enzyme. In this study, we employed QM/MM calculations to investigate whether the reaction mechanism of the silver-substituted enzyme is similar to that of the native enzyme. Our results suggest that the Ag-substituted enzyme can oxidize CO and release CO2 following the same reaction steps as the native enzyme, with a computed rate-limiting step of 10.4 kcal/mol, consistent with experimental findings. Surprisingly, lower activation energies for C-O bond formation have been found in the presence of silver. Furthermore, comparison of rate constants for reduction of copper- and silver-containing enzymes suggests a discrepancy in the transition state stabilization upon silver substitution. We also evaluated the effects that differences in the water-active site interaction may exert on the overall energy profile of catalysis. Finally, the formation of a thiocarbonate intermediate along the catalytic pathway was found to be energetically unfavorable for the Ag-substituted enzyme. This finding aligns with the hypothesis proposed for the wild-type form, suggesting that the creation of such species may not be necessary for the enzymatic catalysis of CO oxidation.

Insights into the Construction of Robust Pt Clusters with Satisfactory Stability on CeO2 for the Catalytic Oxidation of CO.

Improving the efficiency of platinum group metals (Pt, Pd, Rh, etc.) in catalytic oxidation reactions remains an urgent topic. The conflict between the low-temperature activity and high-temperature stability of noble metals can hardly reach a consensus. For instance, Pt cluster catalysts supported on CeO2 with high low-temperature activity will suffer from deactivation due to the redispersion under high-temperature lean-burn reaction conditions. Herein, two Pt1/CeO2 prepared by the incipient wetness impregnation method using different Pt precursors possessed varied Pt-O and Pt-O-Ce coordination numbers (CNs). They showed various priorities in CO oxidation versus NH3 selective catalytic oxidation, materials with higher CNPt-O-Ce selectively catalyzing NH3 oxidation to N2 more superior, conversely materials with lower CNPt-O-Ce performing better in CO oxidation. After activation by H2 reduction, both formed massive Pt clusters on the CeO2 surface but showed drastically distinct stability in lean-burn CO oxidation reactions. By summarizing the experimental results of high-angle annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, Raman spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy, etc., it is beyond doubt that the difference in the initial states of Pt1 due to distinct precursors indeed determine the redispersion behavior of the reduced Pt clusters on CeO2. Materials with lower CNPt-O-Ce and higher CNPt-O are more likely to form robust Pt clusters, as they are not conducive to Pt anchoring, thus restricting the reversible structural evolution occurring under lean-burn CO oxidation and reductive conditions. This approach serves as a guide for the convenient and efficient construction and exploration of robust Pt cluster catalysts.

Enhancing CO catalytic oxidation performance over Cu-doping manganese oxide octahedral molecular sieves catalyst.

The CO oxidation catalytic activity of catalysts is strongly influenced by the oxygen vacancy defects (OVDs) concentration and the valence state of active metal. Herein, a defect engineering approach was implemented to enhance the oxygen vacancy defects and to modify the valence of metal ions in manganese oxide octahedral molecular sieves (OMS-2) by the introduction of copper (Cu). The characterization and theoretical calculation results reveal that the incorporation of Cu2+ ion into the OMS-2 structure led to a rise in specific surface area and pore volume, weakening of Mn-O bonds, higher proportion of the low-coordinated oxygen species adsorbed in oxygen vacancies (Oads) and an increase in the average oxidation state of manganese. These structural modifications were discovered to considerably reduce the apparent activation energy (Ea), thus ultimately significantly enhancing the CO oxidation activity (T99 at 148 ℃at GHSV = 13,200 h-1) than the original OMS-2 (T99 = 215 ℃ at GHSV = 13,200 h-1). Furthermore, In-situ diffuse reflectance infrared Fourier transform (DRIFT) and In-situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) results indicate that the bimetallic synergy enhanced by doping strategy accelerates the conversion of oxygen to chemisorbed oxygen species and the reaction rate of CO oxidation through Mn3++Cu2+↔Mn4++Cu+ redox cycle. The findings of this study offer novel perspectives on the design of catalysts with exceptional performance in CO oxidation.

FeOx-Modified Ultrafine Platinum Particles Supported on MgFe2O4 with High Catalytic Activity and Promising Stability toward Low-Temperature Oxidation of CO.

Catalytic oxidation is widely recognized as a highly effective approach for eliminating highly toxic CO. The current challenge lies in designing catalysts that possess exceptional low-temperature activity and stability. In this work, we have prepared ultrafine platinum particles of ~1 nm diameter dispersed on a MgFe2O4 support and found that the addition of 3 wt.% FeOx into the 3Pt/MgFe2O4 significantly improves its activity and stability. At an ultra-low temperature of 30 °C, the CO can be totally converted to CO2 over 3FeOx-3Pt/MgFe2O4. High and stable performances of CO-catalytic oxidation can be obtained at 60 °C on 3FeOx-3Pt/MgFe2O4 over 35 min on-stream at WHSV = 30,000 mL/(g·h). Based on a series of characterizations including BET, XRD, ICP, STEM, H2-TPR, XPS, CO-DRIFT, O2-TPD and CO-TPD, it was disclosed that the relatively high activity and stability of 3FeOx-3Pt/MgFe2O4 is due to the fact that the addition of FeOx could facilitate the antioxidant capacity of Pt and oxygen mobility and increase the proportion of adsorbed oxygen species and the amounts of adsorbed CO. These results are helpful in designing Pt-based catalysts exhibiting higher activity and stability at low temperatures for the catalytic oxidation of CO.

Improving the Catalytic Performance of BaMn0.7Cu0.3O3 Perovskite for CO Oxidation in Simulated Cars Exhaust Conditions by Partial Substitution of Ba.

The sol-gel method, adapted to aqueous media, was used for the synthesis of BaMn0.7Cu0.3O3 (BMC) and Ba0.9A0.1Mn0.7Cu0.3O3 (BMC-A, A = Ce, La or Mg) perovskite-type mixed oxides. These samples were fully characterized by ICP-OES, XRD, XPS, H2-TPR, BET, and O2-TPD and, subsequently, they were evaluated as catalysts for CO oxidation under different conditions simulating that found in cars exhaust. The characterization results show that after the partial replacement of Ba by A metal in BMC perovskite: (i) a fraction of the polytype structure was converted to the hexagonal BaMnO3 perovskite structure, (ii) A metal used as dopant was incorporated into the lattice of the perovskite, (iii) oxygen vacancies existed on the surface of samples, and iv) Mn(IV) and Mn(III) coexisted on the surface and in the bulk, with Mn(IV) being the main oxidation state on the surface. In the three reactant atmospheres used, all samples catalysed the CO to CO2 oxidation reaction, showing better performances after the addition of A metal and for reactant mixtures with low CO/O2 ratios. BMC-Ce was the most active catalyst because it combined the highest reducibility and oxygen mobility, the presence of copper and of oxygen vacancies on the surface, the contribution of the Ce(IV)/Ce(III) redox pair, and a high proportion of surface and bulk Mn(IV). At 200 °C and in the 0.1% CO + 10% O2 reactant gas mixture, the CO conversion using BMC-Ce was very similar to the achieved with a 1% Pt/Al2O3 (Pt-Al) reference catalyst.

Constructing Efficient CuO-Based CO Oxidation Catalysts with Large Specific Surface Area Mesoporous CeO2 Nanosphere Support.

CeO2 is an outstanding support commonly used for the CuO-based CO oxidation catalysts due to its excellent redox property and oxygen storage-release property. However, the inherently small specific surface area of CeO2 support restricts the further enhancement of its catalytic performance. In this work, the novel mesoporous CeO2 nanosphere with a large specific surface area (~190.4 m2/g) was facilely synthesized by the improved hydrothermal method. The large specific surface area of mesoporous CeO2 nanosphere could be successfully maintained even at high temperatures up to 500 °C, exhibiting excellent thermal stability. Then, a series of CuO-based CO oxidation catalysts were prepared with the mesoporous CeO2 nanosphere as the support. The large surface area of the mesoporous CeO2 nanosphere support could greatly promote the dispersion of CuO active sites. The effects of the CuO loading amount, the calcination temperature, mesostructure, and redox property on the performances of CO oxidation were systematically investigated. It was found that high Cu+ concentration and lattice oxygen content in mesoporous CuO/CeO2 nanosphere catalysts greatly contributed to enhancing the performances of CO oxidation. Therefore, the present mesoporous CeO2 nanosphere with its large specific surface area was considered a promising support for advanced CO oxidation and even other industrial catalysts.

Pd Single-Atom Loaded Ce-Zr Solid Solution Catalysts Prepared by Flame Spray Pyrolysis for Efficient CO Catalytic Oxidation.

Single-atom catalysts (SACs) exhibit remarkable catalytic activity at each metal site. However, conventionally synthesized single-atom catalysts often possess low metal loading, thereby constraining their overall catalytic performance. Here, a flame spray pyrolysis (FSP) method for the synthesis of a single-atom catalyst with a high loading capacity of up to 1.4 wt.% in practice is reported. CeZrO2 acts as a carrier and provides a large number of anchoring sites, which promotes the high-density generation of Pd, and the strong interaction between the metal and the support avoids atom aggregation. Pd-CeZrO2 series catalysts have excellent CO oxidation performance. When 0.97 wt.% Pd is added, the catalytic activity is the highest, and the temperature can be reduced to 120 °C. This work presented here demonstrates that FSP, as an inherently scalable technique, allows for elevating the single-atom loading to achieve an increase in its catalytic performance. The method presented here more options for the preparation of SACs.

Probing Catalytic Sites and Adsorbate Spillover on Ultrathin FeO2-x Film on Ir(111) during CO Oxidation.

The spatially resolved identification of active sites on the heterogeneous catalyst surface is an essential step toward directly visualizing a catalytic reaction with atomic scale. To date, ferrous centers on platinum group metals have shown promising potential for low-temperature CO catalytic oxidation, but the temporal and spatial distribution of active sites during the reaction and how molecular-scale structures develop at the interface are not fully understood. Here, we studied the catalytic CO oxidation and the effect of co-adsorbed hydrogen on the FeO2-x/Ir(111) surface. Combining scanning tunneling microscopy (STM), isotope-labeled pulse reaction measurements, and DFT calculations, we identified both FeO2/Ir and FeO2/FeO sites as active sites with different reactivity. The trilayer O-Fe-O structure with its Moiré pattern can be fully recovered after O2 exposure, where molecular O2 dissociates at the FeO/Ir interface. Additionally, as a competitor, dissociated hydrogen migrates onto the oxide film with the formation of surface hydroxyl and water clusters down to 150 K.

Pd-CeO2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation.

Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. To promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N2 flow or air flow, Pd-CeO2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.