Surgical Treatment of Non-Displaced Subcapital Hip Fracture: Femoral Neck System vs. Cannulated Screws. Comparative Study. / Tratamiento quirúrgico de fractura subcapital de cadera no desplazada: Femoral Neck System vs Tornillos canulados. Estudio Comparativo.

OBJECTIVE: The objective of this study is to compare the outcomes of using the Femoral Neck System (FNS) (DePuy Synthes®) versus the use of cannulated screws (CS) in the surgical treatment of non-displaced subcapital hip fractures. MATERIALS AND METHODS: A retrospective cohort study was conducted on non-displaced subcapital hip fractures treated with CS or FNS between 2020 and 2023, with a minimum follow-up of one year. A total of 28 patients were included, 14 treated with CS and 14 with FNS. Demographic, radiological, clinical, and functional variables were analyzed. RESULTS: In the CS group, 64% were male, with a mean age of 66.5 years (SD 14.9) and an average follow-up of 22 months (range, 12-36 months). In the FNS group, 57% were male, with a median age of 60.8 years (SD 13.78) and an average follow-up of 16 months (range, 12-24 months). Regarding functional outcomes, no significant differences were found between FNS and CS in the Harris scale: 94.21 ± 11.55 for FNS and 96.50 ± 6.9 for CS (p=0.618). The total postoperative complications (FNS/CS) were 7.1% versus 43%, and implant failure with conversion to total hip replacement was 0% versus 43%, both significantly higher in the CS group (p=0.047; p=0.016, respectively). The FNS also presented a lower rate of avascular necrosis (0% versus 11.1%, p=0.391) and nonunion (0% versus 20%, p=0.163), although these differences did not reach statistical significance. CONCLUSIONS: Although both treatment methods, cannulated screws and the Femoral Neck System (FNS), showed similar short-term functional outcomes in the management of undisplaced subcapital femoral fractures, the FNS demonstrated a significantly lower rate of complications and reoperations. These results suggest that the FNS could be considered a safer and more effective option compared to cannulated screws.

An unusual Ogden type V tibial tubercle avulsion fracture: a case report and literature review.

BACKGROUND: Ogden type V tibial tubercle avulsion fracture is an unusual type of physial injury. Thus, little is known about its mechanism of injury and treatment. The type of osteosynthesis is variable and depends on the experience of the surgeon. We commonly used cancellous screws fixation combined with tension band wiring for displaced fracture of the anterior tibial tuberosity. CASE PRESENTATION: The present manuscript describes a case of a Han nationality 13-year-old boy who presented with severe pain of the left knee, which began after landing following a high jump. He had no significant past medical history apart from a high body mass index of 30.3. Radiographs revealed that he had an unusual Ogden type V tibial tubercle avulsion fracture. He was treated by open reduction and combined fixation with cannulated screws and tension-band wiring. After 3 months, the fracture healed without any complications or knee symptoms with full range of motion. He underwent reoperation for symptomatic hardware, which was removed at 5 months after initial surgery, and returned to his prior level of sporting activity at 1 year follow-up. CONCLUSION: Our case suggests that excellent functional outcome could be achievable by open reduction with the combination of internal fixation and tension-band wiring for Ogden type V tibial tubercle avulsion fracture. This type of osteosynthesis could not only achieve anatomical reduction and stable fixation for such fractures, but also avoid further damage to the proximal tibial epiphysis, which prevents serious complications, such difference in leg length.

Anterior variable angle locking neutralisation plate superiority over traditional tension band wiring for treating transverse patella fractures.

Purpose: This paper investigates the biomechanical benefits of using hybrid constructs that combine cannulated screws with tension band wiring (TBW) cerclage compared to cannulated screws with anterior Variable Angle locking neutralisation plates (VA LNP). These enhancements can bear heavier loads and maintain the repaired patella's integrity, in contrast to traditional methods. Method: Eighteen fresh-frozen human cadaver patellae were carefully fractured transversely at their midpoints using a saw. They were then divided into two groups of nine for subsequent utilisation. Fixation methods included Cannulated Screw Fixation added with either TBW or VA LNP Fixation Technique. Cyclic loading simulations (500 cycles) were conducted to mimic knee motion, tracking fracture displacement with Optotrak. After that, the constructs were secured over a servo-hydraulic testing machine to determine the load-to-failure on axial mode. Results: The average fracture displacement for the anterior neutralisation plate group was 0.09 ± 0.12 mm, compared to 0.77 ± 0.54 mm for the tension band wiring with cannulated screw group after 500 cyclic loading. This result is statistically significant (p = 0.004). The anterior neutralisation plate group exhibited a mean load-to-failure of 1359 ± 21.53 N, whereas the tension band wiring group showed 780.1 ± 22.62 N, resulting in a significant difference between the groups (p = 0.007). Conclusion: This research highlights the superior biomechanical advantage of VA LNP over TBW for treating simple transverse patella fractures with two cannulated screws. It also highlights how the TBW is still a valuable option considering the load-to-failure limit. Level of Evidence: Not Applicable.

Analysis of risk factors for difficult implant removal in children with slipped capital femoral epiphysis treated by cannulated screws.

Introduction: Cannulated screws are widely used in the treatment of slipped capital femoral epiphysis, which can be removed after physeal closure on patient's request. This study aimed to analysis the potential risk factors for difficult removal in children with slipped capital femoral epiphysis treated by cannulated screws. Patients and methods: This study enrolled 32 hips that had undergone removal of cannulated screws after treatment of slipped capital femoral epiphysis at our department. The primary outcomes were the difficult screw removal. The secondary outcomes were functional outcome assessed by using a modified Harris Hip Score and complications of fractures and surgical site infection. Related risk factors for difficult removal were recorded and analyzed by multivariable logistic regression. Results: In total, 32 hips were evaluated, with a mean age of 14.9 ± 1.3 years old (range, 13-19 years). Six (18.8%) hips presented with difficult removal, including 4 cases of screws' slip and 2 breakages. The average implantation time in the difficult removal group (5.7 ± 1.0) was also significantly longer than that in the easily removed group (3.8 ± 0.9, p = 0.001). The mean surgical time in patients with difficult removal was 66.3 ± 11.6 min, which was also significantly longer than that (54.8 ± 8.3) in the other patients (p = 0.008). The duration of screw implantation was an independent risk factor for difficult removal. Conclusions: Prolonged screw duration was a predictor for difficult removal in children with slipped capital femoral epiphysis treated by cannulated screws. An early surgery after physeal closure might benefit those with a request for screw removal.

Low avascular necrosis rates in femoral neck fractures: efficacy of cannulated screw fixation.

PURPOSE: Cannulated screw fixation for femoral neck fractures is often limited by concerns of avascular necrosis (AVN) occurring, historically seen in 5-40% of fixed intracapsular fractures. This study aims to assess the outcomes, particularly the AVN rate, associated with current surgical techniques within our unit. METHODS: We conducted a single-center cross-sectional study, manually searching operative records between July 14, 2014, and December 1, 2018, identifying patients with intracapsular fractured neck of femur fixed with cannulated screws, with a minimum of two years follow-up. Patient records and radiographs were reviewed for clinical and radiographic diagnoses of AVN, non-union, post-operative metalwork infection, and screw penetration of the head. Additionally, fracture pattern and displacement, screw configuration, reduction techniques, and adequacy of reduction were recorded, with radiographs independently analyzed by four orthopedic surgeons. RESULTS: Fifty-six patients were included; average age of 67 years (range 30-100). Forty-two patients (75%) sustained displaced fractures and 14 patients (25%) had undisplaced fractures. Two (4%) patients developed AVN, with no cases of non-union, post-operative metalwork infection or screw penetration of the head. Eight patients (14%) sustained a high-energy injury, though none of these patients developed AVN. All fractures required closed reduction; no open reductions performed. Twenty-seven (64%) of reductions were adequate. CONCLUSION: Our observed AVN rate is notably lower than the widely reported figures, even among a significant proportion of displaced fractures that were fixed. This study underscores that with adequate fixation, cannulated screws represent an excellent option for treating intracapsular neck of femur fractures, even in cases of displaced fracture patterns with imperfect reduction.

Cannulated screws fixation for nondisplaced femoral neck fractures: early versus late weight-bearing-a prospective analysis.

PURPOSE: Nondisplaced intracapsular fractures (Garden I/II) are predominantly treated with an internal fixation technique. The purpose of the study is to identify the best rehabilitation protocol after internal fixation with 3 parallel cannulated screws. METHODS: All patients operated on from 2016 to 2021 for femoral neck fractures by internal fixation with 3 cannulated screws were enrolled into this prospective study. The population was divided into two groups: Group A (n = 34) who followed a postoperative rehabilitation protocol involving full and immediate loading, and Group B (n = 22) who followed a postoperative rehabilitation protocol involving late full loading (after 30 days). The two groups were compared with each other by mortality rate, postoperative complications and need for re-interventions. Functional outcome and quality of life were assessed at the minimum follow-up of 1 year using the modified Harris Hip Score (HHS) and the Short form health survey (SF-12) questionnaire. RESULTS: Group A showed a lower complication rate (2.9% vs. 18.2%), a lower 1-year mortality rate (5.9% vs. 9.1%), a better perception of mental health status (SF12-MCS 56.2 vs. 51.4, p = 0.03) but a worse perception of one's physical health status (SF12-PCS 48.1 vs. 56.7, p < 0.01). The two groups were also statistically overlapping in terms of the functional outcome achieved after the intervention (HHS was 90.94 in Group A vs. 93.15 in Group B, p = 0.32). CONCLUSION: Postoperative complications, mortality and revision rate were higher in patients who followed a late-loaded rather than early loaded rehabilitation protocol. Functional outcome at 1-year survival is not significantly different. In nondisplaced intracapsular hip fractures treated with cannulated screws, an immediate full load should be preferred. Query.

Subvastus Arthrotomy and Multifaceted Fixation in Medial Femoral Comminuted Hoffa's Fracture: A Case Report.

In managing orthopedic trauma, Hoffa's fracture, a rare intra-articular fracture affecting the femoral condyle, presents a unique challenge. We report a case of a 45-year-old male patient who had a traumatic injury and complained of substantial knee discomfort and limited range of motion. The patient had a medial femoral comminuted Hoffa's fracture. Subvastus arthrotomy was employed to handle the fracture successfully, and then a locking reconstruction plate, Herbert screws, and 4 mm cannulated screws were used for precise reduction and fixation. At the one-year follow-up, the patient showed acceptable postoperative results, including recovered knee function and radiographic indications of fracture repair.

The small screw-apex distance is potentially associated with femoral head osteonecrosis in adults with femoral neck fractures treated by closed reduction and percutaneous 3 parallel cannulated screws.

OBJECTIVE: Femoral neck fractures (FNFs) are among the most common fractures in elderly individuals. Surgery is the main treatment for FNFs, and osteonecrosis of the femoral head (ONFH) is one of the unacceptable complications. This study aimed to assess both the clinical and radiological outcomes in patients with FNFs treated with three parallel cannulated screws and to identify relationship between screws position and ONFH. PATIENTS AND METHODS: A total of 100 patients who were treated with closed reduction and fixed with 3 parallel cannulated screws met the inclusion criteria between January 2014 and December 2020 at authors' institution. The follow-up duration, age, sex, affected side, and injury-to-surgery interval were collected; the neck-shaft angle of both hips, screw-apex distance (SAD) and the tip-apex distance (TAD)were measured; and the Garden classification, quality of reduction and presence of ONFH were evaluated. RESULTS: The sample consisted of 37 males and 63 females, with 60 left and 40 right hips affected. The mean age of patients was 54.93 ± 12.24 years, and the mean follow-up was 56.3 ± 13.38 months. The overall incidence of ONFH was 13%. No significant difference was observed in the incidence of ONFH by affected side, age, fracture displacement, injury-to-surgery interval, neck-shaft angle deviation, or reduction quality. The SAD was significantly shorter in ONFH patients than in normal patients for all three screws (p = 0.02, 0.02, and 0.01, respectively). CONCLUSIONS: The short SAD of all screws is associated with femoral head necrosis of FNFs treated with 3 cannulated screws. The short SAD indicated that screws malpositioning in the weight-bearing area of the femoral head, potentially harming the blood supply and compromising the anchorage of the primary compressive trabeculae in this region.

Tension band high-strength suture combined with absorbable cannulated screws for treating transverse patellar fractures: finite element analysis and clinical study.

Objective: Few reports exist on the treatment of transverse patellar fractures (TPFs) using absorbable cannulated screws and high-strength sutures, and most screws and sutures lack good biomechanics and clinical trials. Therefore, this study aimed to demonstrate the biomechanical stability and clinical efficacy of tension-band high-strength sutures combined with absorbable cannulated screws (TBSAS) in treating TPFs (AO/OTA 34 C1). Methods: Finite element models of five internal fixation schemes were established: tension-band wire with K-wire (TBW), TBW with cerclage wire (TBWC), TBW with headless pressure screws (TBWHS), TBW with full-thread screws (TBWFS), and TBSAS. We comprehensively compared the biomechanical characteristics of the TBSAS treatment scheme during knee flexion and extension. Forty-one patients with TPFs in our hospital between January 2020 and August 2022 were retrospectively enrolled and divided into the TBSAS (n = 22) and TBWC (n = 19) groups. Clinical and follow-up outcomes, including operative time, visual analog scale (VAS) pain score, postoperative complications, Bostman score, and final knee range of motion, were compared between both groups. Results: Finite element analysis (FEA) showed that TBWHS and TBWFS achieved the minimum mean fracture interface relative displacement during knee flexion (45°, 0-500 N bending load) and full extension (0°, 0-500 N axial load). There was no significant difference between TBSAS (0.136 mm) and TBWC (0.146 mm) during knee flexion (500 N); however, TBSAS displacement was smaller (0.075 mm) during full extension (500 N). Furthermore, the stress results for the internal fixation and the patella were generally lower when using TBSAS. Retrospective clinical studies showed that the TBSAS group had a shorter operative time, lower VAS pain score at 1 and 2 months postoperatively, better Bostman knee function score at 3 and 9 months postoperatively, and better final knee joint motion than the TBWC group (all p < 0.05). There were five cases (26.3%) of internal fixation stimulation complications in the TBWC group. Conclusion: TBSAS demonstrated excellent safety and effectiveness in treating TPFs. It is sufficient to meet the needs of TPF fixation and early functional exercise and effectively reduces metal internal fixation-induced complications and secondary surgery-induced trauma.

Bio-mechanical effects of femoral neck system versus cannulated screws on treating young patients with Pauwels type III femoral neck fractures: a finite element analysis.

INTRODUCTION: As a novel internal fixation for femoral neck fractures, the femoral neck system has some advantages for young Pauwels type III femoral neck fractures without clear biomechanical effects and mechanisms. Thus, the objection of the study is to realize the biomechanical effects and mechanism of FNS cannulated screws on treating young patients with Pauwels type III femoral neck fractures compared to cannulated screws which are commonly used for femoral neck fractures by finite element analysis. METHODS: Firstly, the model of young Pauwels type III femoral neck fractures, femoral neck system (FNS), and three cannulated screws (CS) arranged in an inverted triangle were established, and the internal fixations were set up to fix young Pauwels type III femoral neck fractures. Under 2100 N load, the finite element was performed, and the deformation, peak von Mises stress (VMS), and contact at fracture segments were recorded to analyze the biomechanical effects and mechanism of FNS and three-CS fixing young Pauwels type III femoral neck fractures. RESULTS: Compared to three-CS, the deformation of the whole model, internal fixation, and fracture segments after FNS fixation were lower, and the peak VMS of the whole model and the internal fixation after FNS were higher with lower peak VMS of the distal femur and the fracture segments. With a sticking contact status, the contact pressure at fracture segments after FNS fixation was lower than that of three-CS. CONCLUSIONS: FNS can provide better mechanical effects for young patients with Pauwels type III femoral neck fractures, which may be the mechanical mechanism of the clinical effects of FNS on femoral neck fracture. Although there is high stress on FNS, it is still an effective and safe internal fixation for young patients with Pauwels type III femoral neck fractures.

Intramedullary Fixation of Hand Fractures and Arthrodeses.

Intramedullary fixation has long been popular for fracture fixation in the upper extremity from the shoulder through the carpus. Recently, intramedullary fixation in the hand has gained increasing interest, specifically in the metacarpals and phalanges, corresponding with the development of improved cannulated headless screw technology. Along with the advantages of increased operative speed and less surgical dissection, which can promote rapid healing, many benefits exist, supporting their use despite some drawbacks. This article reviews the background and biomechanics of intramedullary fixation with a specific focus on cannulated headless screws, describes the application and techniques of intramedullary screw fixation in the hand, and details the associated outcomes and costs for metacarpal fractures, phalangeal fractures, and interphalangeal joint arthrodesis.

What is the Fate of Undisplaced Femoral Neck Fractures Treated With Cannulated Screws?

BACKGROUND: We aimed to report implant survival in Garden type I and II femoral neck fractures treated with cannulated screws in elderly patients. METHODS: We retrospectively studied 232 consecutive unilateral Garden I and II patients (232 fractures) treated with cannulated screws. Mean age was 81 years (range, 65 to 100), and a body mass index of 25 (range, 15.8 to 38.3). No between-group differences were found in demographic variables and/or baseline measurements (P > .05). Mean follow-up was 36 months (range, 1 to 171). Two observers measured baseline radiographic variables with good-to-excellent interobserver reliability. The posterior tilt angle, measured on a cross-table lateral x-ray, was used to classify the cohort into <20° (n = 183) and ≥20° (n = 49). The cumulative incidence with competing risk analysis was used to predict association between posterior tilt and subsequent conversion to arthroplasty. Patient survival was calculated with the Kaplan-Meier estimate. RESULTS: Implant survival was 86.3% (95% confidence interval (CI) 80 to 90) at 12 months and 77.3% (95% CI 64 to 86) at 70 months. The 12-month cumulative incidence failure was 12.6% (95% CI 8 to 17). After controlling for confounders, posterior tilt ≥20° had higher risk of subsequent arthroplasty when compared to posterior tilt <20° (38.8 [95% CI 25 to 52] versus 5% [95% CI 2.8 to 9], subhazard ratio 8.3, 95% CI 3.8 to 18), without any other radiologic or demographic factor being associated with failure. Patient survival was 88.2% (95% CI 83 to 91.7) at 12 months, 79.5% (95% CI 73 to 84) at 24 months, and 57% (95% CI 48 to 65) at 70 months. CONCLUSION: Cannulated screws were a reliable treatment for Garden I and II fractures, except when there was posterior tilt ≥20°, where arthroplasty should be considered.

Biomechanical analysis of fixation strength at different nailing angles for femoral neck fracture with insufficient reduction.

To analyze the fixation strength of cannulated screws fixation in the treatment of femoral neck fracture with posterior tilt due to insufficient reduction. Two sets of digital models of anatomical reduction and 15° tilting reduction were established by CT data. Each group of models was modeled with two different fixation methods. One fixation method was fixed according to the standard cannulated screws recommended by AO. Another fixation method is to tilt the screw posterior tilt 15°. The final four groups of models were obtained: AO principle nailing posterior tilt model (Group A), posterior direction nailing posterior tilt model (Group B), AO principle nailing anatomic reduction model (Group C) and posterior direction nailing anatomic reduction model (Group D). The maximum displacement of the fracture end, the maximum Von-Mises stress and the stress distribution of the internal fixation were compared among the four groups. Four groups of models were established on artificial bone by 3D printing guide plate technology. The 600 N pressure test and yield test were performed on a biomechanical machine. The finite element and biomechanical models showed that groups B and C were more stable than groups A and D. The stability of group B was not worse than that of group C. When the femoral neck fracture produces a posterior tilt, a posterior reduction is allowed. The change of AO screw to posterior tilting screw fixation has more powerful advantages. No posterior tilt or posterior reduction, AO screw placement is still required.

The novel magnesium-titanium hybrid cannulated screws for the treatment of vertical femoral neck fractures: Biomechanical evaluation.

Background: Conventional cannulated screws are commonly used for internal fixation in the treatment of vertical femoral neck fractures. However, the noticeably high rates of undesirable outcomes such as nonunion, malunion, avascular necrosis, and fixation failure still troubled the patients and surgeons. It is urgent to develop new cannulated screws to improve the above clinical problems. The purpose of this study was to design a novel magnesium-titanium hybrid cannulated screw and to further evaluate its biomechanical performance for the treatment of vertical femoral neck fractures. Methods: A novel magnesium-titanium hybrid cannulated screw was designed, and the conventional titanium cannulated screw was also modeled. The finite element models for vertical femoral neck fractures with magnesium-titanium hybrid cannulated screws and conventional cannulated screws were respectively established. The hip joint contact force during walking gait calculated by a subject-specific musculoskeletal multibody dynamics model, was used as loads and boundary conditions for both finite element models. The stress and displacement distributions of the cannulated screws and the femur, the micromotion of the fracture surfaces of the femoral neck, and the overall stiffness were calculated and analyzed using finite element models. The biomechanical performance of the Magnesium-Titanium hybrid cannulated screws was evaluated. Results: The maximum stresses of the magnesium-titanium hybrid cannulated screws and the conventional cannulated screws were 451.5 â€‹MPa and 476.8 â€‹MPa, respectively. The maximum stresses of the femur with the above different cannulated screws were 140.3 â€‹MPa and 164.8 â€‹MPa, respectively. The maximum displacement of the femur with the hybrid cannulated screws was 6.260 â€‹mm, lower than the femur with the conventional cannulated screws, which was 7.125 â€‹mm. The tangential micromotions in the two orthogonal directions at the fracture surface of the femoral neck with the magnesium-titanium hybrid cannulated screws were comparable to those with the conventional cannulated screws. The overall stiffness of the magnesium-titanium hybrid cannulated screw system was 490.17 â€‹N/mm, higher than that of the conventional cannulated screw system, which was 433.92 â€‹N/mm. Conclusion: The magnesium-titanium hybrid cannulated screw had superior mechanical strength and fixation stability for the treatment of the vertical femoral neck fractures, compared with those of the conventional cannulated screw, indicating that the magnesium-titanium hybrid cannulated screw has great potential as a new fixation strategy in future clinical applications.The translational potential of this article: This study highlights an innovative design of the magnesium-titanium hybrid cannulated screw for the treatment of vertical femoral neck fractures. The novel magnesium-titanium hybrid cannulated screw not only to provide sufficient mechanical strength and fixation stability but also to contribute to the promotion of fracture healing, which could provide a better treatment for the vertical femoral neck fractures, beneficially reducing the incidence of nonunion and reoperation rates.

Management of Distal Femur Unicondylar Fractures by Calcaneal Buttress Plating: A Prospective Interventional Study.

Background: Unicondylar fracture of distal femur accounts for less than 1% of all femoral fractures. As conservative methods have shown substandard results, traditional surgical treatment includes open reduction and internal fixation by Herbert screws, cannulated screws, and conventional lateral locking plates. Though screw fixation has excellent results over long run, there is literature documenting the loosening and loss of articular congruency in elderly patients and in comminuted fracture patterns. Also, the traditional locking plates are precontoured to fit the lateral condyle, whereas there is no specific implant to fix the medial condylar fractures. The merit of the calcaneal plating is that it is easily moldable and can be used for either of the sides irrespective of fracture pattern. Objectives: This study aimed to evaluate the clinical outcome of calcaneal plate (D-shape) fixation in distal femur unicondylar fractures. Materials and Methods: A total of 30 patients were studied, who met the inclusion criteria and consented to the surgery. After appropriate investigations, these patients were treated with calcaneal plating and were followed up postoperatively at 2 weeks, 1 month, 3 months, and 6 months for clinical evaluation. Results: There was a gradual increase in the range of motion (ROM) with subsequent follow-ups. The overall mean ROM evaluated at 6 months was 108.46° ± 28.27° with P < 0.001 and was a statistically significant outcome. Also, the mean ROM for sagittal split fractures (~120°) was comparatively more than the coronally split fractures (~90°). The functional outcome assessed by Neer scoring showed excellent and satisfactory results in 24 (80%) patients, whereas the remaining six (20%) patients had poor results. None of the patients had nonunion, infection, or implant failure. Conclusion: With no specific implant for isolated unicondylar fractures, the use of calcaneal plate in our study has shown promising results probably due to its low profile design reducing the soft-tissue irritation and wide area of bone coverage by the plate offering regions of intermittent fixation due to its spanning design, thereby promoting periosteal preservation and ultimately fracture union.

Fibula allograft with cannulated screw fixation versus ordinary cannulated screw fixation for femoral neck fractures: a 10-year retrospective comparative study.

BACKGROUND: For femoral neck fractures in young and middle-aged patients, both fibula allograft with cannulated screw fixation and ordinary cannulated screw fixation are clinically effective treatments. However, for unstable femoral neck fractures, ordinary cannulated screw fixation is characterized by a high risk of postoperative complications and a high rate of mechanical failure after internal fixation. For this study, we systematically compared the long-term efficacy and postoperative complications of these two procedures. METHODS: A total of 156 subjects diagnosed as femoral neck fractures participated in our study. Subjects in the combination group underwent fibula allograft with cannulated screw fixation (n = 76), and those in the control group were treated with ordinary cannulated screw fixation (n = 80). Baseline characteristics, perioperative outcomes, Harris hip score (HHS) and EuroQoL five-dimension questionnaire (EQ-5D); and the incidence of postoperative and bone healing complications in the two groups were recorded and compared. RESULTS: The average follow-up time was more than 10 years. Intra-operative blood loss significantly increased in the combination group compared with the control group (P < 0.05). There were significantly improved performances in healing time, the time course of recovery of full-weight-bearing stepping, HHS and EQ-5D scores in the combination group compared with the control group (P < 0.05). Besides, the incidence rates of femoral head necrosis, nonunion, femoral neck shortening and total hip replacement were significantly lower in the combination group than those in the control group (P < 0.05). CONCLUSION: Fibula allograft with cannulated screw fixation shows a better long-term therapeutic effect than ordinary cannulated screw fixation for femoral neck fractures in young and middle-aged patients. Patients receiving the combination strategy have faster and high-quality functional recovery after femoral neck fractures and a lower incidence rate of postoperative complications.

Expanding the applications of intramedullary cannulated screw fixation in the hand.

OBJECTIVES: Intramedullary cannulated headless compression screw fixation (ICHCS) is gaining popularity for managing metacarpal and phalangeal fractures, but is still relatively new to the surgical landscape. We aim to further illustrate its utility and versatility by presenting the outcomes of such fractures treated with ICHCS at two tertiary plastic surgery centres. Primary objectives were to assess functional range of motion, patient-reported outcomes, and complication rates. MATERIALS AND METHODS: All patients with metacarpal or phalangeal fractures treated with ICHCS (n = 49) between September 2018 and December 2020 were retrospectively reviewed. Outcomes were active ranges of motion (TAM), QuickDASH scores (obtained via telephone), and complication rates. Two-tailed Student's t-tests evaluated differences between centres. RESULTS: TAMs were available for 59% (n = 34/58) of fractures; 70.7% were metacarpal and 29.3% were phalangeal. The mean cohort metacarpal TAMs and phalangeal TAMs were 237.7° and 234.5°, respectively. QuickDASH scores were available for 69% (n = 34/49) of patients. The mean cohort score for metacarpal fractures was 8.23, and 5.13 for phalangeal. Differences between the two centres were statistically significant (p < 0.05). Two complications occurred, giving an overall complication rate of 3.45%. CONCLUSION: Our results corroborate previous reports on ICHCS, further demonstrating its versatility and capacity to provide excellent outcomes. More prospective, comparative studies are needed to fully determine the suitability of ICHCS.

Minimally Invasive Reduction of Intraarticular Calcaneal Fractures With Percutaneous Fixation Using Cannulated Screws Versus Kirschner Wires: A Retrospective Comparative Study.

BACKGROUND: Several minimally invasive techniques were developed for management of intraarticular calcaneal fractures. This study aimed to compare the functional and radiological outcomes of 2 minimally invasive reduction and fixation techniques using cannulated screws or Kirschner wires (K-wires) for fixation. METHODS: This study was a retrospective comparative review of patients with displaced intraarticular calcaneal fractures, who were treated with cannulated screws or K-wires techniques. Clinical and radiological data were collected and compared between both groups. Functional outcomes and patient satisfaction using the Maryland Foot Score (MFS) and the visual analogue scale (VAS) of pain, in addition to the complications, were compared between both groups. RESULTS: In total, 70 patients were included in the study: 34 in the cannulated screws group, with a mean age of 35.2 ± 4 years, and 36 in the K-wires groups, with a mean age of 33.4 ± 3 years. The operative time was shorter in the K-wires group (40.5 ± 5.6 minutes) compared to the cannulated screw group (49.5 ± 4.5 minutes), P < .001. There were no statistically significant differences between both groups regarding the radiological parameters, including Bohler's angle, angle of Gissane, calcaneal width, height, or length. The mean MFS, mean VAS, and complications were not different between the 2 groups. CONCLUSION: Treatment of displaced intraarticular calcaneal fractures with minimally invasive reduction and fixation using either cannulated screws or K-wires can achieve similar excellent functional and radiological outcomes, with high patient satisfaction. The use of K-wires has the advantage of reduced operative time than cannulated screws. LEVELS OF EVIDENCE: Level III: Retrospective comparative study.

C1 lateral mass screw insertion using cannulated, navigated screws: preliminary results of a novel technique.

PURPOSE: The upper cervical spine region is densely populated by neural and vascular structures impeding the approach for fusion surgery. Technological advancement simplify the approach to C1-C2 fusion, thus reduce risks. The current paper purpose is to describe initial experience with a novel technique modification for C1 lateral screw insertion that incorporates cannulated-navigated screw system with intra-operative 3D imaging. METHODS: A single-center single surgeon database was reviewed to identify all patients who underwent placement of C1 lateral mass screw insertion using the novel technique modification described below, on 2020. This cohort was retrospectively analyzed and compared with a cohort of patients who were operated on by the same surgeon with non-cannulated, navigated screws with intra-operative 3D imaging (O-arm, Medtronic, USA) between 2011 and 2019. Following navigated starting hole and drilling of the C1 lateral mass, a blunt guide-wire is used to palpate the hole and cannulated screw is advanced to the correct position over the wire. After initial purchase, a navigated screw driver is used for final screw depth position. RESULTS: Twelve C1 lateral mass screws were inserted in six patients using this novel cannulated-navigated screw placement technique and compared to 24 patients operated using navigated non-cannulated screws. Minimal Estimated Blood Loss (EBL) was recorded in five of six cases undergoing the novel cannulated navigated placement of C1 lateral mass screws. Comparison to non-cannulated cohort demonstrated an EBL of 83CC vs. 354CC (Not significant). Mean surgery time was 97min and 118min for the cannulated-navigated and navigated only procedures (p = 0.03, statistically significant) respectively. In the current cohort, all screws were rated in optimal position and no repositioning procedures were performed. CONCLUSION: The new method presented allows for faster and possibly safer and more accurate C1 lateral mass screw insertion.

The use of the femoral neck system (FNS) leads to better outcomes in the surgical management of femoral neck fractures in adults compared to fixation with cannulated screws: A systematic review and meta-analysis.

BACKGROUND: Intracapsular femoral neck fractures are challenging to treat, with outcomes depending on the quality of reduction, and the stability of fixation. Cannulated cancellous screws (CCS) are the most commonly used implants to fix these fractures, but failure rates are significant. The recently introduced femoral neck system (FNS) may be a better option than CCS fixation and this review attempts to compare the results. METHODS: Four electronic databases were searched for eligible articles that had comparative data on the outcomes of fixation of adult femoral neck fractures with FNS and CCS. Data on various outcome parameters were collected. Meta-analysis was conducted using a random-effects model with 95% confidence intervals. RESULTS: Eight studies with 509 cases having a mean age of 50.8 years were included for final analysis. FNS was found to be associated with significantly reduced complication rates (p < 0.001), decreased incidence of postoperative femoral neck shortening (p < 0.001), quicker time to fracture union (p = 0.002), and better functional outcome scores (p < 0.001) compared to cannulated screws. FNS was also associated with a shorter operating time (mean difference 6.65 min) although not statistically significant (p = 0.24). CCS group had significantly reduced mean blood loss (p < 0.001). CONCLUSION: The available literature supports FNS as a better option for adult femoral neck fractures, with a lower complication rate, quicker union, and better clinical outcomes. LEVEL OF EVIDENCE: Level 3.