Comparative study of the effects of custom-made insole and ordinary insole in adults with flexible flatfoot on different slopes.

BACKGROUND: Flatfoot (pes planus) is a common foot deformity, and its causes are mainly related to age, gender, weight, and genetics. Previous studies have shown that custom-made insoles could have a positive effect in improving plantar pressure and symptoms in individuals with flexible flatfeet, but it remains to be explored whether they can still show benefits in daily walking on different slopes. OBJECTIVE: This study aims to investigate a custom-made insole based on plantar pressure redistribution and to verify its effectiveness by gait analysis on different slopes. METHODS: We recruited 10 subjects and compared the peak pressure and impulse in each area between custom-made insole (CI) and ordinary insole (OI) groups. RESULTS: The results illustrate that CI raises the pressure in T area, improves the ability of the subjects to move forward in the slope walking, which was beneficial to gait stability. CONCLUSION: The redistribution of pressure in MF and MH area is promoted to provide active protection for subjects. Meanwhile, CI could decrease the impulse in MF area during uphill and level walking, which effectively reduces the accumulation of fatigue during gait. Moreover, avoiding downhill walking could be able to protect foot from injury in daily life.

Evaluation of custom-made Relay® stent-grafts for aortic arch landing zones 0 and I: experience from two high-volume aortic centres.

OBJECTIVES: To report experience with a Relay® stent-graft custom-made platform in treating different aortic arch pathology in 2 high-volume aortic centres. METHODS: A retrospective analysis of all patients treated between July 2016 and July 2023 with custom-made Relay® stent-graft (custom-made device). Underlying aortic arch pathology was an aneurysm, penetrating aortic ulcer, and dissection. Three custom-made device designs were used: proximal scallop, fenestrations, and inner branches. The endpoints were technical success, perioperative stroke, death, and reintervention rate. RESULTS: Thirty-five patients (89% males) with a mean age of 70 ± 11 years were treated.Indication for treatment was penetrating aortic ulcer in 14 patients (40%), aneurysm in 11 patients (31%) and aortic dissection in 10 patients (29%). The technical success rate was 100%. Twenty-eight patients (80%) had proximal sealing in zone 0, and 7 (20%) had proximal sealing in zone 1. Nine patients (25.6%) had proximal scallops, 9 (25.6%) had 1 big fenestration and 17 (48.8%) had a branched device; 1 with single branch, 15 with double branches and 1 with triple branches. Thirty patients (86%) had previous or simultaneous left subclavian artery revascularization. No patient died during 30 days. Two patients (5.7%) had stroke postoperatively; both recovered without disabling deficits. The mean follow-up was 35 ± 26 months. Six patients (17.1%) died during follow-up. One patient required reinforcement of the bridging stent in the left common carotid artery and one additional vascular plugging of the left subclavian artery. Three patients received distal extension. CONCLUSIONS: The Relay® stent-graft custom-made platform showed a good performance in our study with a high technical success rate, low perioperative stroke and mortality, and low reintervention rates during the follow-up.

Evaluation of Different Subperiosteal Implant Thicknesses on Mechanical Strength and Stress on Bone by Finite Element Analysis.

Implants have always been within the interest of both clinicians and material scientists due to their places in reconstructive and prosthetics surgery. Excessive bone loss or resorption in some patients makes it difficult to design and manufacture the implants that bear the necessary loads to carry the final prosthetics. With this study; we tried to determine the minimum material thickness of the subperiosteal implants that can withstand the physiological forces. We have created a digital average bone structure based on actual patient data and designed different subperiosteal implants with 1, 1.5, and 2mm material thicknesses (M1, M2, M3) for this digital model. The designed implant models are subjected to 250 Newtons (N) of force, and the implant and bone are tested for the stress they are exposed to, the pressure they transmit to, and their mechanical strength with Finite Element Analysis with the physical parameters boot for the implant material and human bone. Results show us that under specific design parameters and thicknesses, the 1mm thickness design failed due to exceeding the yield stress limit of 415MPa with a 495,44MPa value. The thinnest implant showed plastic deformation and transmitted excessive forces, which may cause bone resorption due to residual stress. We determined that thinner subperiosteal implants down to 1.5mm that have the necessary material parameters for function and tissue support can be designed and manufactured with current technologies.

Exploring consistent ratios in morphometry of the proximal tibia: insights for knee arthroplasty.

INTRODUCTION: The current study, which delves into proximal tibia morphometric parameters in a Greek sample, not only analyzes whether specific linear distance ratios are consistent but also paves the way for a potential novel metric system for knee arthroplasty imaging studies using constant ratios. These findings could have significant implications for future enlarged research and clinical practice. METHODS: A total of 38 dried tibiae were evaluated by two independent investigators. The following distances were measured with a digital Vernier sliding caliper: (1) the mediolateral distance of the proximal surface (A), (2) the anteroposterior distance of the proximal surface (B), (3) The longitudinal length of the bone (C), (4) the line connecting the anterior margin of the proximal surface with the highest peak of the tibia tuberosity (D), (5) the depth of the proximal margin of the medial articular facet (AF) (medial plateau) (E) and (6) the depth of the proximal margin of the lateral AF (lateral plateau) (F). RESULTS: The A, B, C, D, E, and F mean distances were 71.3 mm, 47.4 mm, 340.2 mm, 37.1 mm, 42 mm, and 35.9 mm. Reliability analysis for each observer on all measurements revealed an interclass correlation (ICC) score of 0.975 (observer 1) and 0.971 (observer 2). The ratio A/B was 1.5, A/C was a constant 0.2, and D/C was 0.1. The ratio E/F was 1.2. The six measurements (A-F) showed excellent inter-observer reliability (all ICC values > 0.990). CONCLUSIONS: The study established constant ratios of the studied linear distances around the proximal tibia. Considering these ratios, asymmetrical tibial components in knee arthroplasty seem to replicate the native anatomy more closely. Furthermore, the distance from the anterior margin of the proximal surface to the tibial tuberosity peak, constituting one-tenth of the longitudinal length of the tibia, shows promise as a metric system for imaging studies, especially in assessing lesions around tibial components.

Sex Related Anatomical Differences in Patients With Aortic Arch Pathology and Their Impact on the Feasibility of Double and Triple Branched Endografts.

OBJECTIVE: To evaluate sex based differences in ascending aorta and arch anatomy in patients with underlying proximal aortic disease and to evaluate their impact on feasibility for total endovascular repair with custom made, branched arch devices. METHODS: This was a retrospective cross sectional review of all patients undergoing open and or total endovascular arch repair due to distal ascending aorta and or aortic arch pathologies in a single high volume aortic centre between 2012 and 2022. Anatomical ascending aorta and aortic arch parameters were analysed on a flow centreline on a dedicated 3D workstation. Sex related differences of the ascending aorta, aortic arch, and supra-aortic vessels were evaluated. Subsequently, four endovascular devices were assessed for feasibility: double and triple branched devices both for the Zenith (Cook Medical) and Relay (Terumo Aortic) platforms, first in accordance with the instructions for use and then considering the possibility of adjunctive cervical debranching. The primary endpoints were sex specific differences in aortic anatomy, while secondary endpoints included sex based feasibility of branched endograft devices. RESULTS: During the study period, 395 patients underwent total aortic arch repair, of whom 152 (51 female, 33.5%) had high quality computed tomography angiograms available and were included in the study. Female patients had a shorter proximal landing zone than males (22 mm vs. 47 mm; p < .001). Left subclavian artery dissection was more frequent in men (24.8% vs. 3.9%; p < .001). Other anatomical parameters showed a similar distribution between sexes. Female patients presented a lower feasibility for double branched devices (35.3% vs. 58.4%; p = .015) as well as a tendency for lower feasibility rates for triple branched devices (31.4% vs. 47.5%; p = .081). CONCLUSION: Although most ascending aortic and arch parameters showed similar trends in both sexes, the availability of a suitable proximal landing zone was lower in female patients. Consequently, female patients had lower feasibility rates for double arch branched endografts and, to lesser extent, for triple arch branched endografts.

The Evolution of Custom Subperiosteal Implants for Treatment of Partial or Complete Edentulism in Patients with Severe Alveolar Ridge Atrophy.

Dental implants have always played an important role in dentistry and have been used to replace missing teeth since around 600 AD. They can be classified into three groups: endosteal, subperiosteal, and transosteal. Over time, different materials have been used to manufacture dental implants and these, in turn, can be divided into three groups: metals, ceramics, and polymers. Today, the most commonly used treatment for edentulism is the use of endosteal implants. However, such an approach cannot be used in patients with severe alveolar ridge atrophy and, in such cases, custom subperiosteal implants are an alternative. This review article focuses on historical developments and improvements that have been made over recent years in treatment options for patients suffering from edentulism and significant resorption of the alveolar ridge. These treatment options involve the utilization of custom subperiosteal implants. This paper looks at the historical evolution of these implants, the significance of diagnostic imaging, and the application of the contemporary methods of production, such as CAD-CAM and additive manufacturing. The research emphasizes the importance of accuracy and personalization provided by these emerging technologies that have rendered subperiosteal implants a more feasible and less intrusive alternative for patients suffering from significant bone loss.

Comparison of Macintosh Laryngoscope, King Vision®, VividTrac®, AirAngel Blade®, and a Custom-Made 3D-Printed Video Laryngoscope for Difficult and Normal Airways in Mannequins by Novices-A Non-Inferiority Trial.

Background: Endotracheal intubation (ETI) is a cornerstone of airway management. The gold standard device for ETI is still the direct laryngoscope (DL). However, video laryngoscopes (VLs) are now also widely available and have several proven advantages. The VL technique has been included in the major airway management guidelines. During the COVID-19 pandemic, supply chain disruption has raised demand for 3D-printed medical equipment, including 3D-printed VLs. However, studies on performance are only sparsely available; thus, we aimed to compare 3D-printed VLs to the DL and other VLs made with conventional manufacturing technology. Methods: Forty-eight medical students were recruited to serve as novice users. Following brief, standardized training, students executed ETI with the DL, the King Vision® (KV), the VividTrac® (VT), the AirAngel Blade® (AAB), and a custom-made 3D-printed VL (3DVL) on the Laerdal® airway management trainer in normal and difficult airway scenarios. We evaluated the time to and proportion of successful intubation, the best view of the glottis, esophageal intubation, dental trauma, and user satisfaction. Results: The KV and VT are proved to be superior (p < 0.05) to the DL in both scenarios. The 3DVL's performance was similar (p > 0.05) or significantly better than that of the DL and mainly non-inferior (p > 0.05) compared to the KV and VT in both scenarios. Regardless of the scenario, the AAB proved to be inferior (p < 0.05) even to the DL in the majority of the variables. The differences between the devices were more pronounced in the difficult airway scenario. The user satisfaction scores were in concordance with the aforementioned performance of the scopes. Conclusions: Based upon our results, we cannot recommend the AAB over the DL, KV, or VT. However, as the 3DVL showed, 3D printing indeed can provide useful or even superior VLs, but prior to clinical use, meticulous evaluation might be recommended.

Challenges and solutions in 3D printing for oncology: a narrative review.

BACKGROUND AND OBJECTIVE: Oncology is increasingly adopting three-dimensional (3D) printing, a method of creating objects through additive manufacturing using various techniques and materials. This technology, divided into conventional 3D printing (using non-biological materials like thermoplastics or titanium) and bioprinting (involving living cells and tissues), has shown potential in surgical planning, implant creation, and radiotherapy. However, despite promising preclinical and clinical applications, its clinical integration faces challenges such as a lack of strong evidence, standardized guidelines, and detailed data on costs and scalability. This study reviews the current use of 3D printing in oncology, aiming to differentiate between practical and experimental applications, thereby guiding clinicians interested in incorporating this technology. METHODS: A literature search was conducted to gather comments, reviews, and preclinical and clinical studies focusing on the use of 3D printing in oncology, with publications dated before December 1, 2023. The search for pertinent studies involved utilizing PubMed and Google Scholar Review. The selection process for articles was based on a unanimous consensus among all authors. We excluded topics related to bioprinting and the technical nuances of 3D printing. KEY CONTENT AND FINDINGS: The review comprehensively describes the utilization of 3D printing in radiation oncology, surgical oncology, orthopedic oncology, medical oncology, hyperthermia, and patients' education. However, 3D printing faces several limitations that are related to unpredictable costs, difficult scalability, very complex regulations and lack of standardization. CONCLUSIONS: 3D printing is increasingly useful in oncology for diagnostics and treatment, yet remains experimental and case-based. Despite growing literature, it focuses mostly on pre-clinical studies and case reports, with few clinical studies involving small samples. Thus, extensive research is needed to fully evaluate its efficacy and application in larger patient groups.

Short-term outcomes of endovascular aortic aneurysm repair with the new Braile Biomédica® total custom-made abdominal endograft: Experience from three Italian centers.

INTRODUCTION: Since 2019, Braile Biomédica® introduced a novel custom-made abdominal endograft tailored to the aorta's anatomy, featuring sizing every 3 mm and a diameter change from 50 mm to 8 mm. This design permits uncovered fenestrations around a single Z stent, eliminating the need for bridging stents to visceral vessels. Utilizing triple stent technology, optimal neck fixation is ensured, enabling treatment of necks shorter than 2 mm, with three 360° fenestrations optimizing graft fixation. This paper aims to analyze the initial experience with this custom-made infrarenal graft for abdominal aorta aneurysm (AAA), concerning procedural success and post-procedural short-term outcomes. RESULTS: Among 12 patients treated from May 2022 to January 2024, technical success was achieved in 91.7 %, with only one intra-procedural complication. Follow-up CT scans at 1-3 months revealed resolution of an intraoperative endoleak and two late complications: a late type III endoleak and right renal artery occlusion. CONCLUSIONS: The recent experience with Braile Biomédica® custom-made abdominal endograft demonstrates promising outcomes, particularly in treating AAAs with challenging anatomical features.

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study.

BACKGROUND: Fractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures. METHODS: A retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared. RESULTS: The surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433). CONCLUSION: Combining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery. CLINICAL TRIAL REGISTRATION: 12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn .

Wireless system for recording evoked potentials.

Experiments measuring evoked potentials require flexible and rapid adjustment of stimulation and recording parameters. In this study, we have developed a recording system and an associated Android application that allow making such adjustments wirelessly. The system consists of 3 units: for stimulation, recording and control. Most of the modules in this system are custom made, although the stimulator and tablet are off-the-shelf products. When installed on the tablet, our Android application allows wireless communication with the control unit from a distance of 5 m. In testing, the recording unit had low internal noise and displayed signals faithfully. Upon receiving commands from the control unit, the stimulation unit produced precisely timed pulse outputs. Using this system, we were able to record evoked field potentials in the dentate gyrus of a rat; responses increased as expected with increasing stimulation pulse amplitude and duration.

Three-dimensional printed custom-made modular talus prosthesis in patients with talus malignant tumor resection.

BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.

Mandibular Fixed Prosthesis With A 3d-Printed Subperiosteal Implant: A Case Report.

BACKGROUND: This case report aims to present the successful restoration of the atrophic partially edentulous posterior mandible using custom-made subperiosteal implants. CASE DESCRIPTION: The fixed prosthesis restoration was achieved using CAD-CAM technologies and 3D metal printing methods. The partially edentulous 58-year-old patient expressed a preference not to undergo bone augmentation procedures. The patient with teeth in the anterior mandible was treated with two separate custom-made subperiosteal implants. A custom-made prosthesis was fabricated from sintered titanium using machined subperiosteal implants with a universal external connection. PRACTICAL IMPLICATIONS: Subperiosteal implants offer several advantages over conventional bone grafting plus intraosseous implant placement techniques, such as the simple, one-step procedure for atrophic jaws, streamlining the treatment process and reducing the overall time involved. Treatments using subperiosteal implants can be an alternative solution for individuals with severely atrophic jaws. Longer-term studies in a larger sample are warranted to corroborate previous reports.

Unintended Exchange of Target Vessels for Celiac Trunk and Superior Mesenteric Artery Branches in Complex Endovascular Aortic Repair.

PURPOSE: The treatment of thoracoabdominal aortic aneurysms (TAAAs) using branched endovascular aortic repair (BEVAR) is safe and effective. During deployment, the superior mesenteric artery (SMA) branch can unintentionally open into the celiac trunk (CT) ostium and switched catheterization of the SMA from the CT branch and the CT from the SMA branch can be used as an alternative technique in these cases. This study aimed to investigate the outcome of exchanging the intended target vessels (TVs) for the CT and SMA branches during BEVAR. MATERIALS AND METHODS: A single-center retrospective analysis of patients with TAAAs who underwent BEVAR, using off-the-shelf or custom-made devices (CMDs), with an unintended exchange of TVs for the CT and SMA branches was performed. RESULTS: Between 2014 and 2023, 397 patients were treated with BEVAR for TAAA. Eighteen (4.5%) of those patients were treated with an exchange of TVs for the CT and SMA branches. T-branch was used in 9 cases (50%) and the remaining patients were treated with CMDs. Twelve patients were treated electively, 3 were symptomatic and 3 presented with rupture. Of 36 mesenteric TVs in those 18 patients, 34 (94%) were catheterized successfully, including all 18 SMAs and 16 of the 18 CTs. No branch stenosis or occlusion of the switched mesenteric TVs was detected during follow-up. During 30-day follow-up, 3 patients died and during a median follow-up of 3 (interquartile range [IQR]: 1-15) months 3 more patients died. None of the deaths or the 2 unintended reinterventions was induced by the mesenteric TV exchange. The median hospital stay was 14 (IQR: 9-22) days with a median of 4 (IQR: 2-11) days at the intensive care unit. CONCLUSION: The exchange of the mesenteric TVs for the CT and SMA branches during BEVAR with off-the-shelf and CMD endografts is feasible with good TV patency and freedom from TV-related reinterventions. This alternative technique should be considered in selected cases when direct catheterization via the intended branch is deemed more time-consuming or not feasible. CLINICAL IMPACT: This is the first description of using an exchange of target vessels for the celiac trunk and the superior mesenteric artery branches in patients with thoracoabdominal aortic aneurysms undergoing BEVAR, using off-the-shelf or custom-made devices. The high success rate as well as the good clinical results without any branch stenosis or occlusion during follow-up highlight the feasibility of this alternative technique. It could help in challenging cases when catheterization of the intended target vessels is not possible or too time consuming, resulting in higher success rates of BEVAR and better clinical results.

Advancements in computer-assisted orthognathic surgery: A comprehensive review and clinical application in South Korea.

OBJECTIVES: Orthognathic surgery (OS) has evolved with technological advancements, notably through the implementation of computer-assisted orthognathic surgery (CAOS). This article aims to elucidate various types of CAOS and their efficiency and accuracy, supplemented by a thorough literature review focusing on their clinical applications in South Korea. STUDY SELECTION, DATA, AND SOURCES: A comprehensive search strategy was employed, including systematic reviews, meta-analyses, randomized controlled trials, and observational studies published until December 2023 in the PubMed, MEDLINE, and Google Scholar databases. The literature search was limited to articles written in English. RESULTS: Static CAOS demonstrated high precision, reduced operative time, and high accuracy, suggesting its potential reliability in orthognathic procedures. Dynamic CAOS presented a promising avenue for exploration, showing an accuracy comparable to that of traditional methods. The critical considerations for CAOS include accuracy, time efficiency, and cost-effectiveness. Recent studies have indicated advancements in the time efficiency of static CAOS. Static CAOS requires less equipment and is more cost-effective than dynamic CAOS. CONCLUSIONS: CAOS offers clear advantages over conventional OS in terms of surgical convenience and accuracy in implementing the surgical plan. To achieve recognition as the gold standard method for maxillofacial deformity treatment, CAOS must overcome its limitations and undergo continuous verification via well-designed studies. CLINICAL SIGNIFICANCE: The introduction of CAOS, mainly static CAOS with high precision and reduced surgical time, signifies a notable advancement in OS. However, rigorous studies are warranted to validate CAOS as the gold standard for treating maxillofacial deformities.

A new custom-made bivalve brace for pectus carinatum in children and adolescents: preliminary promising experience of 140 patients from a tertiary center.

Introduction: International research suggests that poor patient compliance is the main cause of tutor failures in the context of potential novel orthopedic bivalve braces for conservative treatment of pectus carinatum. Our entire experimental study is based on the hypothesis that a rigid bivalve brace that patients can accept could solve the main problem associated with the conservative approach-poor compliance. The hypothesis was to reduce the thickness and weight of the classic bivalve brace to ensure concealment and make it sustainable enough to be worn several hours a day without compromising its therapeutic efficacy. Materials and method: The research was conducted from January 2020 to December 2022 to ensure follow-up of all participants for at least 6 months. In 36 months, 140 patients with pectus carinatum were assessed and conservatively treated with the studied guardian to analyze the therapeutic efficacy of the bivalve brace and patient compliance. From the initial visit, the parents and patient were informed that this is a 2-year therapeutic course during which the bivalve brace should be worn at least 23 h a day (with 1 h of abstinence per day for routine personal hygiene practices). Compliance is the key to therapy success, and the duration of treatment depends on patient adherence. Results: The exceptional effectiveness of the experimental brace was confirmed by both the questionnaire from the patients (with an average satisfaction rate of 8.9/10) and an assessment of the therapy's results by a properly selected medical committee (with a VAS scale satisfaction of 7.2/10 for symmetric forms and 7.1/10 for asymmetric ones). Conclusion: In conclusion, the analyzed data confirmed the research hypotheses. First, none of the 140 patients had cardiovascular diseases directly related to their condition, confirming that pectus carinatum is a pathology of a purely aesthetic nature. Second, a cheap, lightweight, and easily obscured brace significantly improved patient compliance. Along with this, the social relevance of the aesthetic aspect today may be an important factor in motivating the study cohort to adhere to therapy. In the past, esthetics and appearance were less relevant at the social level, which may have contributed to the high abandonment and reduced compliance rates of the many studies in the literature.

Feasibility of exergaming for upper extremity rehabilitation in people with multiple sclerosis: prospective clinical trial.

BACKGROUND: Exergaming has been suggested as a rehabilitation method since it is more motivational for people with multiple sclerosis (MS, pwMS). However, the major disadvantage of this method is the lack of specific scenarios designed for pwMS. OBJECTIVES: This study aims to assess the feasibility of exergaming, which was developed for pwMS. METHODS: This unblinded prospective clinical trial was performed in the outpatient MS Clinic of Dokuz Eylül University Hospital. Exergaming scenarios were developed in collaboration with medical personnel consisting of physiotherapists and doctors, and computer engineers. A total of 30 participants who had definite MS diagnoses were included. The exergaming scenarios were implemented using the Microsoft Kinect. A physiotherapist applied custom-made exergames for one session. All the participants were assessed immediately after the session. The User Satisfaction Evaluation Questionnaire was used to assess the user's satisfaction with the system and exergaming. RESULTS: The mean age was 41.5, the mean Expanded Disability Status Scale was 4.5 (range between 0 and 7), and the mean disease duration was 10.0 years. Twenty patients were relapsing-remitting, and 10 were secondary-progressive. The mean scores of the User Satisfaction Evaluation Questionnaire were 4.33 (SD = 0.84) for helpfulness for rehabilitation, 1.63 (SD = 1.1) for not disturbing, 4.50 (SD = 1.07) for understandability, 4.0 (SD = 0.91) for easiness to control, and 4.33 (SD = 0.84) for enjoyability. CONCLUSION: These results showed that our custom-made exergaming scenario could be feasible in upper extremity rehabilitation in MS. More research is needed to investigate its effectiveness in the rehabilitation of upper limbs.

Surgical Outcomes and Complications of Custom-Made Prostheses in Upper Limb Oncological Reconstruction: A Systematic Review.

Bone tumors of the upper limb are a common cause of bone pain and pathological fractures in both old and young populations. Surgical reconstruction and limb salvage have become valid options for these patients despite this kind of surgery being challenging due to the need for wide bone resection and the involvement of surrounding soft tissues. Computer-assisted technology helps the surgeon in pre-operative planning and in designing customized implants. The aim of this study was to investigate the surgical outcomes and complications of custom-made prostheses in oncologic reconstruction of the upper limb and if they are reliable options for patients suffering from aggressive tumors. An electronic search on PubMed, Google Scholar, and Web of Knowledge was conducted to identify all available articles on the use of custom-made prostheses in oncological resections of the upper limb. Twenty-one studies were included in the review, comprising a total of 145 patients with a mean age of 33.68 years. The bone involved was the humerus in 93 patients, and the radius was involved in 36 patients. There were only six cases involving proximal ulna, three cases involving the scapula, and seven cases involving the elbow as well as soft tissues around it. The most frequent primary tumor was the giant cell tumor, with 36 cases, followed by osteosarcoma with 25 cases, Ewing Sarcoma with 17 cases, and Chondrosarcoma with 7 total cases. Forty patients were affected by bone metastases (such as renal cell cancer, breast cancer, melanoma, and rectal cancer) or hematologic diseases involving bone (lymphoma, myeloma, or non-Hodgkin disease). Custom-made prostheses are a viable option for patients who suffer from malignant tumors in their upper limbs. They are a reliable aid for surgeons in cases of extensive resections.

Single Branch Endovascular Aortic Repair Procedure for an Abdominal Aortic Aneurysm in a Patient With Horseshoe Kidney: A Case Report.

Introduction: Horseshoe kidney (HK) is an anatomical variant characterised by abnormalities in the position, rotation, and vascular supply of the kidney, with functioning renal masses on both sides of the vertebral column fused together at the isthmus. Due to the altered pattern of kidney vasculature, endovascular aortic repair for aortic abdominal aneurysm (AAA) in the presence of HK requires vascular anatomy specific planning. Report: A 68 year old male, with multiple comorbidities, presented with an asymptomatic AAA and HK. The kidney vasculature was characterised by the presence of three arteries: two arising laterally at the same level and a third polar artery arising from below. The polar artery was 6 mm in diameter and larger than the other two; therefore, in order to preserve this artery, a custom-made device with a single side branch was implanted below the main renal arteries. A balloon expandable covered stent was used to complete the side branch into the polar renal artery. The follow-up computed tomography angiography revealed a successful outcome, with total aneurysm exclusion, branched graft patency, no endoleak, and unchanged renal function. Discussion: This case report shows a possible surgical solution for a case of HK with AAA and the importance of accurate endovascular planning. Large polar arteries, if present, need to be preserved, and custom-made devices in the modern endovascular era permit that. This approach could represent the best option for complicated patients.

A combination of suprachoroidal injection of triamcinolone using a custom-made needle and intravitreal Ziv-aflibercept every eight weeks to manage naïve/denovo central DME: a single-center retrospective case series.

BACKGROUND: Previous studies have shown promising effects of combining intravitreal bevacizumab and suprachoroidal injection of triamcinolone acetonide in treating DME. However, further research is needed. OBJECTIVE: To assess the efficacy and safety of combining both intravitreal Ziv-aflibercept and suprachoroidal injection of triamcinolone acetonide using a custom-made needle in naïve and de novo central diabetic macular edema (DME) patients every eight weeks for 24 weeks. METHODS: Central macular thickness was measured via spectral domain-optical coherence tomography, and best-corrected visual acuity was measured via a Snellen chart at baseline and at 4, 8, 12, 16, and 24 weeks postinjection. Additionally, cataract progression, intraocular pressure (IOP), and ocular safety were analyzed. RESULTS: A total of 10 eyes of 6 patients were treated with suprachoroidal injections of triamcinolone acteonid combined with an intravitreal injection of Ziv-aflibercept. Vision improved from 0.69 log minimum angle of resolution (MAR) at baseline to 0.39 log MAR after treatment. Central macular thickness significantly decreased from 462.3 ± 166 µm at baseline to 362.7 ± 77.6 µm at 24 weeks postinjection. CONCLUSION: Suprachoroidal injection of triamcinolone using a custom-made needle with the intravitreal agent Ziv-aflibercept to treat de novo/naïve central DME has favorable outcomes and adequate safety results. Moreover, this study demonstrated the benefit of adapting the previous treatment combination for extending the interval between anti-VEGF treatments from 4 to 8 weeks, which could prevent further expenses, especially in low-income countries.However, large multicenter randomized clinical trials with longer follow-up periods are needed to assess this treatment route, especially in low-income and resourced countries.