Influence of using different toothpaste during bleaching with violet LED light (405 nm) on the colour and roughness of dental enamel: an in vitro study.

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405 nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3 mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

Association between molar-incisor hypomineralisation and dental anomalies.

BACKGROUND: Common etiological factors have been reported in the development of molar-incisor hypomineralisation (MIH) and dental anomalies (DA). AIM: To assess the association between MIH and DAs. DESIGN: A cross-sectional study was performed to evaluate the presence of MIH and other six DAs in a sample of 415 pretreatment records from patients aged 9-18 years. Statistical analyses were performed using the chi-squared and Fisher's exact tests, and logistic regressions. RESULTS: There was statistically significant association between the prevalence of DAs and MIH (CI: 1.43-2.43, φ-coefficient: 0.204, PR: 1.87). Higher percentage of tooth agenesis (CI: 1.37-1.68, φ-coefficient: 0.271, PR: 1.50), maxillary premolar agenesis (CI: 1.70-3.65, φ-coefficient: 0.125, PR: 2.49), mandibular second premolar agenesis (CI: 1.68-3.16, φ-coefficient: 0.172, PR: 2.30) and distoangulation of the mandibular second premolars (CI: 1.31-3.47, φ-coefficient: 0.103, PR: 2.13) was observed among children who had MIH-affected teeth. Individuals with MIH had a 2.95 times greater chance of having DAs (R2 = .153). The number of patients with DAs was higher when the first molar showed severe defects (OR = 4.47; R2 = .149). CONCLUSION: There is a weak association between MIH and DAs. Patients with severe MIH lesions have a slightly higher risk of presenting DAs.

Effects of experimental in-office bleaching gels incorporated with co-doped titanium dioxide nanoparticles on dental enamel physical properties.

To evaluate the physical properties of enamel submitted to hydrogen peroxide (HP) incorporated with titanium dioxide nanoparticles (NP) co-doped with nitrogen and fluorine and irradiated with violet LED light (LT). Enamel-dentin disks were randomly allocated (T0) into groups, according to HP (HP6, HP15, or HP35) and NP (no NP, 5NP, or 10NP) concentrations, and irradiated or not with LT. A negative control (NC) group was set. After three bleaching sessions (T1, T2, and T3), specimens were stored in saliva for 14 days (T4). Enamel surface microhardness number (KHN), surface roughness (Ra), cross-sectional microhardness (ΔS), energy-dispersive spectroscopy (EDS), scanning electron (SEM), and polarized light (PLM) microscopies were performed. Surface KHN was significantly influenced by NP over time, independently of LT irradiation. At T3 and T4, gels with 5NP and 10NP exhibited no KHN differences compared to NC and baseline values, which were not observed under the absence of NP. NP incorporation did not statistically interfere with the ΔS and Ra. PLM images exhibited surface/subsurface darkening areas suggestive of demineralizing regions. SEM demonstrated some intraprismatic affection in the groups without NP. EDS reported a higher enamel calcium to phosphorus ratio following 10NP gels applications. Gels with NP maintained the enamel surface microhardness levels and seemed to control surface morphology, upholding the mineral content. None of the proposed experimental protocols have negatively influenced the enamel surface roughness and the cross-sectional microhardness.

Effect of a brush tip on in-office bleaching gels in an attachable syringe: Hydrogen peroxide penetration, bleaching efficacy and amount of gel expended.

OBJECTIVE: Evaluate the penetration of hydrogen peroxide (HP) into the pulp chamber, bleaching efficacy (BE) and amount of gel expended during in-office bleaching using an applicator brush tip and conventional tip from different commercial brands. MATERIALS AND METHODS: 104 human premolars were randomly distributed into thirteen groups (n = 8) according to the commercial brand: DSP White Clinic 35 % Calcium (DW), Nano White 35 % (NW), Total Blanc One-Step 35 % (TS), Whiteness HP Blue 35 % (WB), Potenza Bianco Pro SS 38 % (PB), Opalescence XTra Boost 40 % (OB), no bleaching (negative control), and application method: applicator brush tip and conventional tip for all groups. Initial HP concentration (%) was determined via titration and pH was measured with digital pH meter. Concentration (µg/mL) of HP into the pulp chamber was measured using UV-Vis spectrophotometry, the BE (ΔE*ab, ΔE00 and ΔWID) was evaluated with a digital spectrophotometer, and the amount of gel expended was evaluated using a precision analytical digital balance. Statistical analysis included two-way ANOVA, Tukey's, and Dunnett's test. Comparison between HP into the pulp chamber vs BE was performed with Person's correlation (α = 0.05). RESULTS: Brush tip demonstrated a low amount of HP in the pulp chamber compared to the conventional method for all bleaching gels (p < 0.0003), as well as lower amount of gel expended (p < 0.002). The brush tip did not result in a significant difference in BE compared to the conventional (p > 0.05). No correlations were found between both factors (p > 0.05). CONCLUSION: Brush tip showed lower penetration of HP in the pulp chamber and a reduced volume of spent gel when compared to the conventional tip, for all commercial brands. CLINICAL RELEVANCE: Brush tip is recommended for bleaching gels in an attachable syringe due to its ability to reduce the penetration of HP into the pulp chamber and minimize the amount of bleaching gel used.

Whitening toothpastes with hydrogen peroxide concentrations vs. at-home bleaching.

OBJECTIVES: To evaluate the effect of whitening toothpastes with different hydrogen peroxide (HP) concentrations on HP permeability, color change, and physicochemical properties, compared to at-home bleaching treatment. MATERIALS AND METHODS: Forty-nine premolars were randomized into seven groups (n = 7): untreated (control); at-home bleaching with 10% carbamide peroxide gel (AH; 10% CP) with 14 and 28 applications of 180 min each (AH [14 × 180 min] and AH [28 × 180 min]); three whitening toothpastes (3% HP; 4% HP and 5% HP) and 10% CP brushed 28 times for 90 s each (TB [28 × 90 s]). HP permeability was measured using a UV-VIS spectrophotometer and color change by a digital spectrophotometer (ΔEab, ΔE00, and ΔWID). Initial concentration, pH, and viscosity were measured through titration, digital pH meter, and rheometer, respectively. Statistical analysis included one-way ANOVA, Tukey's test, and Dunnett's test (α = 0.05). RESULTS: 4% HP group showed acidic pH, the lowest viscosity and the highest HP concentration into the pulp chamber (p < 0.05). The 10% CP groups had lower HP in the pulp chamber and greater color change than other groups (p < 0.05), except the 5% HP group in ΔEab and ΔE00. For ΔWID, the 10% CP AH groups showed greater whitening than other groups (p < 0.05). CONCLUSIONS: Whitening toothpaste with up to 5% HP resulted in higher HP permeability and less color change compared to 10% CP. Higher HP commercial concentrations in toothpaste increased whitening effect; however, acidic pH toothpastes exhibited greater HP permeability. CLINICAL RELEVANCE: Whitening toothpastes with high hydrogen peroxide concentrations were less effective than at-home bleaching, resulting in less color change and greater permeability of hydrogen peroxide, potentially increasing the risk of tooth sensitivity.

Effect of multi-layer applications of self-etch universal bonding agents on the adhesion of resin composite to enamel.

To evaluate the effect of adhesive coats application on the enamel microtensile bond strength (µTBS) of universal adhesives, morphological etching pattern and their chemical interaction with hydroxyapatite (HA). Two universal adhesives were investigated: Scotchbond Universal (SBU, 3 M) and Prime&Bond Universal (PBU, Dentsply). The adhesives were applied in self-etching mode on bovine enamel (n = 8) in one (1L), two (2L) or three coats (3L) and light-cured as per manufacturers' instructions. As controls adhesives were applied to etched enamel (H3PO4-37% phosphoric acid). Bonded specimens were cut into sticks that were stored in deionized water for 24 h or 6 months prior to µTBS testing. Two-way ANOVA and Tukey's test were used for statistical analysis of bond strength with α = 5%. For morphological SEM analysis, enamel surfaces were treated as aforementioned and immediately rinsed with acetone. The intensity of monomer-calcium salt formation from each treatment was measured via infrared spectroscopy (ATR-FTIR). All treatments presented no significant reduction on µTBS after aging (p > 0.05). However, SBU attained highest µTBS when applied in 3L. PBU showed higher µTBS when applied to H3PO4 etched enamel than 1L or 2L. Etching pattern was enhanced by 3L application, particularly with PBU. Chemical interaction was notably higher for SBU than PBU, with no relevant differences with more layers or prior H3PO4-etching. The application of three adhesive coats of universal adhesives in self-etch mode using may enhance the bonding performance and etching pattern to enamel, surpassing the H3PO4-etched enamel bond for SBU. The chemical interaction with calcium from enamel is not affected by number of coats or prior phosphoric acid etching.

Dual-species biofilm of Streptococcus mutans and Candida albicans produces subsurface caries lesions on bovine enamel.

OBJECTIVES: To develop a protocol for forming subsurface caries lesions on bovine enamel by dual-species biofilms of Streptococcus mutans and Candida albicans in vitro. DESIGN: Biofilms were grown on bovine enamel specimens in artificial saliva (AS) for seven days. After 24 h of formation, the AS was supplemented or not with fluoride (F) using sodium fluoride (0.005 or 0.008 ppm F), and the biofilms were exposed or not to a 20 % sucrose solution (reproducing a cariogenic challenge) once/day. On the seventh day, the biofilms were harvested and had their extracellular polysaccharides (EPS) and inorganic components analyzed. The specimens were subjected to computed X-ray microtomography analysis to determine their mineral concentration. Data were compared using two-way analyses of variance, followed by Fisher's LSD or Student-Newman-Keuls tests (p < 0.05). RESULTS: Biofilms exposed to the cariogenic challenge had significantly higher EPS concentrations than those not exposed, regardless of the presence of F. For biofilms grown with 0.008 ppm F, those exposed to the cariogenic challenge had lower F levels than those not exposed. For biofilms exposed to the cariogenic challenge, those grown with 0.008 ppm F had lower lesion depths and integrated mineral loss, and higher outer layers than those grown without F. CONCLUSIONS: The dual biofilm model assessed was able to create subsurface caries lesions in bovine enamel in vitro, which was influenced by the presence of F in the culture medium and exposure to sucrose.

Infiltração resinosa em lesões brancas cariosas e não cariosas: relato de casos / Infiltración resinosa em lesiones blancas cariosas y no cariosas: Reporte de Casos / Resinous infiltration in carious and non-carious white lesions: Case Reports

Introdução: O processo de desmineralização proveniente da cárie leva à formação de manchas brancas que são a primeira manifestação visível da doença. Os infiltrantes resinosos surgem como uma alternativa para o tratamento dessas lesões não cavitadas, pois sãoresinas de baixa viscosidade e faz parte dos procedimentos que visam uma odontologia menos invasiva. Objetivo: Este estudo objetiva relatar a experiência clínica no uso de infiltrante resinoso, Icon, em lesões de mancha branca de etiologias cariosa e não cariosa em dois pacientes distintos, insatisfeitos com a estética do seu sorriso. Descrição do caso: Ao exame clínico foi observado nos pacientes com lesões brancas. No primeiro paciente, de 14 anos, verificou-se a presença da atividade de cárie e micro cavitações. Dessa forma, o plano de tratamento perpassou orientação de higiene oral supervisionada, aplicação de verniz fluoretado, Enamelast, semanal, adequação do meio com restaurações em resina, e só então o uso do infiltrante. A segunda paciente, de 11 anos, já possuía saúde bucal adequada e tinha queixa estética devido à lesão branca não cariosa, hipoplasia, cujo plano de tratamento foi à utilização do Icon apenas. Conclusões: Nos dois casos obteve-se melhoria estética considerável com este procedimento microinvasivo. Melhoria na saúde bucal, aliado à devolução da estética, pode ser observada com o uso de infiltrantes resinosos (AU).

Introduction: The process of demineralization resulting from caries leads to the formation of white spots that are the first visible manifestation of the disease. Resin infiltrants appear as an alternative for the treatment of these non-cavitated lesions, since they are low viscosity resins and are part of the procedures that aim at a less invasive dentistry.Objective:This study aims to report the clinical experience in the use of a resin infiltrant, Icon,in white spot lesions of carious and non-carious etiologies in two different patients who were dissatisfied with the esthetics of their smiles.Methodology: On clinical examination, white lesions were observed in both patients. In the first patient,14 years old,the presence of caries activity and micro cavitations was verified. Thus, the treatment plan included supervised oral hygiene guidance, weekly application of fluoride varnish,Enamelast, adaptation of the environment with resin restorations, and, onlythen, the use of the infiltrant, Icon. The second patient, 11 years old,already had adequate oral health and had an esthetic complaint due to a non-carious white lesion, hypoplasia, whose treatment plan consisted of the use of Icon only.Conclusions:In both cases considerable esthetic improvement was obtained with this microinvasive procedure. Improvement in oral health, combined with the return of esthetics, can be observed with the use of resin infiltrants (AU).

Introducción: El proceso de desmineralización resultante de la caries conduce a la formación de manchas blancas, que son la primera manifestación visible de la enfermedad. Losinfiltrantes de resina aparecen como una alternativa para el tratamiento de estas lesiones no cavitadas, pues se tratan de resinas de baja viscosidad y forman parte de los procedimientos que buscan una odontología menos invasiva. Objetivo:Este estudio tiene como objetivo relatar la experiencia clínica en el uso del infiltrante de resina,Iconen lesiones de mancha blanca de etiologías cariosas y no cariosas en dos pacientes diferentes, insatisfechos con la estética de sus sonrisas.Metodología: En el examen clínico se observaron lesiones blancas en ambos pacientes. En el primer paciente, 14 añosse verificó la presencia de actividad de caries y micro cavitaciones. De ese modo, el plan de tratamiento incluyó la orientación supervisada de la higiene bucal,la aplicación semanal de barniz de flúor (Enamelast), la adaptación del entorno con restauraciones de resina y, sólo después, el uso del infiltrante,Icon. La segunda paciente, 11 años,ya tenía una salud bucal adecuada y presentaba una queja estética debido a una lesión blanca no cariosa, hipoplasia, cuyo plan de tratamiento fue el uso exclusivo de Icon. Conclusiones: En ambos casos, se consiguió una mejora estética considerable con este procedimiento microinvasivo. La mejora de la salud bucal, unida a la recuperación de la estética, puede observarse con el uso de infiltrantes de resina (AU).

In vitro effect of fluoride gels supplemented with nano-sized sodium trimetaphosphate on enamel erosive wear.

OBJECTIVE: To assess the protective effect of fluoride (F) gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMPmicro and TMPnano, respectively) against enamel erosion in vitro. METHODS: Bovine enamel blocks (n = 140) were selected according to their surface hardness, and randomly divided into seven groups (n = 20/group), according to the gels tested: Placebo (without F/TMP), 4,500 µg F/g (4500F), 9,000 µg F/g (9000F), 4500F plus 2.5 % TMPnano (2.5 % Nano), 4500F plus 5 % TMPnano (5 % Nano), 4500F plus 5 % TMPnano (Micro 5 %) and 12,300 µg F/g (Acid gel). Blocks were treated once during one minute with the gels, and submitted to erosive (ERO, n = 10/group) or erosive plus abrasive (ERO+ABR, n = 10/group) challenges 4 times/day, for 90 s for each challenge (under reciprocating agitation), during consecutive 5 days. Blocks were analyzed by profilometry, and by surface (SH) and cross-sectional hardness (∆KHN). Data were submitted to two-way ANOVA, and Fisher's LSD test (p < 0.05). RESULTS: For ERO, both TMPnano-containing gels promoted enamel wear significantly lower than Placebo and 4500F, reaching levels similar to both positive controls (9000F and acid gel); significantly lower softening was observed for enamel treated with 4500F+5 % Micro and 4500F+2.5 % Nano. Also, the lowest ∆KHN values were observed for 4500F+2.5 % TMPnano among the TMP-containing gels. For ERO+ABR, the lowest enamel wear was achieved by the use of 4500F+5 % Nano among all gels, including both positive controls; lower softening was observed for Placebo and 9000F groups. CONCLUSION: The addition of 5 % nano-sized TMP to a low-fluoride gel produced superior protective effects for enamel under both challenges conditions, when compared with micrometric TMP, reaching values similar to or superior than both positive controls, respectively for ERO and ERO+ABR. CLINICAL SIGNIFICANCE: The supplementation of low-F gels with TMP was shown to significantly improve their effects on enamel erosive wear, and the use of nano-sized TMP further enhances this protective action.

Biomineralization and remineralizing potential of toothpastes containing nanosized ß-calcium glycerophosphate: an in vitro study.

To evaluate the effect of 1100 ppm F toothpastes supplemented with micrometric or nanosized ß-CaGP (ß-CaGPm/ß-CaGPn) on artificial enamel remineralization, using a pH cycling model. Enamel blocks with artificial caries were randomly allocated into ten groups (n = 10), according to the toothpastes: without fluoride/ß-CaGPm/ß-CaGPn (negative control); 1100 ppm F (1100F); 1100F plus 0.125%, 0.25%, 0.5%, and 1.0% of ß-CaGPm or ß-CaGPn. The blocks were treated 2×/day with slurries of toothpastes. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); integrated mineral loss (ΔIMR); fluoride (F), calcium (Ca), and phosphorus (P) concentrations in the enamel; polydispersity index (PdI); and zeta potential (Zp) were determined. The data were analyzed by ANOVA (p < 0.001). For Zp/PdI, no significance was observed when comparing the means (p > 0.001). The treatment with 1100F-0.25%ß-CaGPn led to %SHR ∼57 higher when compared to the 1100F group (p < 0.001). The lowest ΔKHN was observed for the 1100F-0.25%ß-CaGPn group (p < 0.001). The ΔIMR was lower (∼201%) for the 1100F-0.25%ß-CaGPn when compared to 1100F (p < 0.001). The association of ß-CaGPm and ß-CaGPn to 1100F did not influence its F concentration (p > 0.001). The highest increase in Ca and P was observed for 1100F-0.25%ß-CaGPn (p < 0.001). The addition of 0.25%ß-CaGPn to 1100F toothpaste was able to promote an additional remineralizing effect of artificial caries lesions.

Addition of substances to reduce the erosive potential of acidic beverages to tooth enamel: A scoping review.

OBJECTIVE: This scoping review aimed (1) to map, analyse, interpret and synthesize data from in situ studies on which substances were added to acidic beverages to reduce the erosive potential on tooth enamel and (2) to establish the level of evidence of the effectiveness of adding substances to acidic beverages to reduce the erosive potential on tooth enamel. DESIGN: This is a scoping review, according to the methods from the Joanna Briggs Institute and PRISMA-ScR, with high-sensitivity searches in the databases PubMed (MEDLINE), Virtual Health Library, Embase (Elsevier), Scopus (Elsevier), Web of Science and ScienceDirect (Elsevier). In situ studies published in English until December 2022 were included. Studies that did not report a control group were excluded. To map and summarize the results, tables and figures were used. RESULTS: From 895 potentially eligible articles, nine were included. Blackcurrant juices (n = 5) with the addition of calcium (n = 3) or xanthan gum (n = 2) formulations were the most tested in terms of reducing the erosive potential of the beverages on tooth enamel. The profilometer was the equipment of choice (n = 8) for evaluating the loss of enamel structure after the experimental tests. CONCLUSIONS: Calcium and xanthan gum are among the most tested by in situ studies, offering promising results in reducing the erosive potential of fruit juices and carbonated and energy drinks.

At-home bleaching with carbamide peroxide with concentrations below 10%: bleaching efficacy and permeability in the pulp chamber.

OBJECTIVES: To evaluate the bleaching efficacy and permeability of hydrogen peroxide (HP) in the pulp chamber of human teeth bleached with lower concentrations of carbamide peroxide gel (4%, 5% and 7% CP). MATERIALS AND METHODS: Bleaching gels with lower concentrations were formulated and a commercial standard gel, 10% CP, was used as a reference. Fifty-six human premolars were randomly divided into four groups. Applications of the bleaching gel were made for 3 h for 21 days. The bleaching efficacy was evaluated by digital spectrophotometry on 1, 7, 14 and 21 days, with analysis in the ∆Eab, ∆E00 and WID color spaces. The concentration of HP in the pulp chamber was measured in the same periods by UV-Vis spectrophotometry (µg/mL). Two-way repeated analysis of variance (ANOVA) examined bleaching efficacy and HP permeability, followed by Tukey's post-hoc test (α = 0.05). RESULTS: All groups showed significant color changes, with no statistical differences after the second and third week of bleaching (p > 0.05). The 'time' factor was statistically different (p < 0.05), increasing the bleaching efficacy throughout the treatment. The 4% CP group had lower HP levels in the pulp chamber (p < 0.05). CONCLUSIONS: The results seem promising, revealing that low concentration gels are as effective as 10% CP with the benefit of reducing the amount of HP in the pulp chamber. CLINICAL RELEVANCE: Low concentration 4% PC and 5% PC maintains bleaching efficacy, reduces the penetration of HP peroxide into the pulp chamber, and may reduce tooth sensitivity.

Essential oil-containing solutions (mouthwashes) preserve dental enamel with releasing low Ca and P concentrations without morphology alterations: an in vitro study.

Introduction: The use of natural products such as essential oils has been suggested due to their promising pharmacological effects and economic viability. This study aimed to determine hydrogenic potential (pH), titratable acidity (TA), and ion concentrations of five solutions containing essential oils (EO), when used as a EO-containing solutions, and evaluate ion concentrations, enamel surface loss, and morphology alterations in enamel. Materials and methods: The pH, TA, calcium (Ca), potassium (K), and sodium (Na) concentrations of five EO-containing solutions were measured. Bovine enamel specimens were submitted to two daily 30-s immersions in artificial saliva, citric acid, distilled water, BaCloTea (Basil, Clove e Tea Tree), GeLaTeaPep (Geranium, Lavender, Tea Tree and Peppermint), EucaLem (Eucalyptus and Lemon), Cinnamon, or Spearmint solutions for 14 days. Ca, K, Na, and phosphorus (P) were quantified through ions chromatography, enamel surface loss was determined by profilometry, and surface morphology was qualitatively analyzed through scanning electron microscopy. Data were submitted to one-way ANOVA and Tukey (p < 0.05). Results: The five EO-containing solutions presented significantly lower pH values than distilled water (p < 0.05). The GeLaTeaPep group presented a significantly higher TA value than BaCloTea (p < 0.05), which in turn showed a significantly higher TA value than the other solutions (p < 0.05). The distilled water presented significantly higher Ca, K, and Na concentrations than all EO-containing solutions (p < 0.05). The enamel exposed to EO-containing solutions showed lower Ca and P concentrations than artificial saliva (control) as well as significantly higher surface loss; however, the surface morphology was similar to the artificial saliva. Conclusion: EO-containing solutions have low pH, TA, and low concentrations of Ca, Na, and K. Moreover, enamel exposed to these solutions showed low Ca and P concentrations and slight surface loss without morphology alteration.

Effect of whitening toothpastes with different hydrogen peroxide concentrations: Penetration into the pulp chamber and color change.

OBJECTIVES: This study evaluated the efficacy of simulated brushing with toothpastes containing different concentrations of hydrogen peroxide (HP) in pulp chamber penetration and color change. Also, physical-chemical properties (concentration, pH and viscosity) were evaluated. METHODS: Forty-nine premolars were divided into seven groups (n = 7): untreated (control); whitening gel (White Class 6 %, 6 %BG) with one 90  min application (6 %BG 90  min) and 14 applications of 90  min (6 %BG 14×90 min); toothpastes (Colgate Luminous White Glow 3 %, 3 %TP; Crest 3D White Brilliance 4 %, 4 %TP; Colgate Optic White Pro-Series 5 %, 5 %TP) and 6 %BG toothbrushing for 14 applications of 90 s. HP penetration into the pulp chamber was measured through UV-Vis spectrophotometry and color change with a spectrophotometer (ΔEab, ΔE00, and ΔWID). Initial concentration, pH, and viscosity were measured through Titration, Digital pH-meter, and Rheometer, respectively. Statistical analysis used one-way ANOVA and Tukey's test (α = 0.05). RESULTS: 6 %BG (14×90 min) and 4 %TP groups showed acidic pH and higher concentrations of HP in the pulp chamber compared to the other groups (p < 0.05). On the other side, 3 %TP and 5 %TP groups showed alkaline pH, higher viscosity between the toothpastes and lower HP penetration (p < 0.05). The 6 %BG AH (14×90 min) group exhibited the most significant color change (ΔEab, ΔE00, and ΔWID) (p < 0.05). CONCLUSIONS: Brushing with whitening toothpaste with an acidic pH leads to greater HP penetration into pulp chamber; but, even when a high concentrated HP whitening toothpaste was used, a lower whitening effect was observed when compared to a two-week at-home bleaching. CLINICAL SIGNIFICANCE: Whitening toothpastes containing up to 5 % HP produced lower whitening effect than two-week at-home bleaching. Additionally, HP was detected within the pulp chamber which can potentially impact in tooth sensitivity.

The use of mouthwash containing trimetaphosphate as an adjunct therapy to fluoridated toothpaste reduces enamel demineralization.

INTRODUCTION: The decline in dental caries has been attributed to the widespread use of fluoride (F). Two forms of presentation are fluoridated toothpaste (FT) and mouthwash (MW), widely used by the population. MATERIALS AND METHODS: This study aimed to evaluate in vitro the effects of combining FT and MW, whether supplemented with sodium trimetaphosphate (TMP) or not, on dental enamel demineralization. Bovine enamel blocks (n = 60) were selected based on initial surface hardness (SHi) and divided into 5 experimental groups (n = 12 each): I) Placebo Toothpaste (without F/TMP); II) 1100 ppm F Toothpaste (FT); III) 1100F associated with a MW at 100 ppm F (FT + MW 100F); IV) 1100F associated with a MW at 225 ppm F (FT + MW 250F); and V) 1100F associated with a MW at 100 ppm F supplemented with 0.4 % TMP (FT + MW 100F-TMP). The blocks were treated twice a day, undergoing 5 pH cycles over 7 days. Thus, the percentage change in surface hardness (%SH), integrated subsurface hardness loss (ΔKHN), and the concentration of F, phosphorus (P), and calcium (Ca) in the enamel were determined. The data were submitted to ANOVA and Student-Newman-Keuls test (p < 0.001). RESULTS: The 1100F group was statistically inferior to the groups associated with MW for %SH, ΔKHN, and the concentration of P and Ca in the enamel (p < 0.001). Blocks treated with FT + MW 225F and FT + MW 100F-TMP showed significantly lower %SH compared to the other groups (p < 0.001). The FT + MW 100F - TMP group exhibited the lowest depth mineral loss (ΔKHN), and higher concentration de P in enamel (p < 0.001). CONCLUSION: The adjunct use of MW with FT produces a greater protective effect in inhibiting enamel demineralization, and the supplementation of TMP to the MW with 100F provides a superior effect compared to MW with 225F. CLINICAL SIGNIFICANCE: This combination of treatments could be regarded as one of several alternative fluoride supplements for subjects at elevated risk of caries.

Evaluating color change and hydrogen peroxide penetration in human and bovine teeth through in-office bleaching procedures.

OBJECTIVE: Assess color alteration and hydrogen peroxide (HP) penetration in human and bovine teeth using various in-office bleaching protocols with different application times. MATERIALS AND METHODS: Thirty healthy human premolars and 30 healthy bovine incisors were divided into five groups and subjected to different bleaching protocols: 2 × 15 min, 1 × 30 min, 2 × 20 min, or 1 × 40 min, with a control group for each tooth type. All teeth were treated with 35% HP gel. Color alteration was measured using digital spectrophotometry before and 1 week after bleaching. HP concentration within the pulp was determined via UV-Vis spectrophotometry. Statistical analysis included one-way ANOVA, Tukey's, and Dunnett's tests (α = 0.05). RESULTS: All groups exhibited significant color alteration, with no statistically differences among them (p > 0.05). However, significant differences were observed when compared with their respective control groups (p < 0.05). HP penetration into the pulp was evident in all bleached teeth compared to the control groups (p < 0.05), with the 2 × 20 group showing the highest HP levels within the pulp cavity, irrespective of tooth type (p < 0.05). CONCLUSION: A simplified 1 × 30-min protocol can be recommended as it effectively maintains color alteration and HP penetration, irrespective of whether human or bovine teeth. CLINICAL SIGNIFICANCE: This study suggests that an in-office dental bleaching protocol using a 1 × 30-min session is recommended, as it ensures both effective color change and no increase in the amount of HP penetration.

Development of toothpaste formulations containing mineral clays as abrasive agents and their effects on the physical properties of dental enamel.

To assess the physical properties and topographical aspect of dental enamel's surface microhardness (KHN), surface roughness (Ra), and color parameters CIELAB (∆Eab*), CIEDE 2000 (∆E00), and whiteness index for dentistry (∆WID) after toothbrushing with experimental toothpaste formulations with the following mineral clay types: kaolin, Sparclay SGY, and Tersil CGY used as abrasive component. Scanning electron microscopy (SEM) was performed for topographical analyses purposes. A total of 96 bovine incisors were used in the experiment. They were divided into eight experimental groups (n = 12), namely: NC-negative control (no treatment), CT12-Colgate Total 12®, CMP-Colgate® Máxima Proteção Anticáries, K-kaolin experimental toothpaste, SGY-Sparclay SGY experimental toothpaste; CGY-Tersil CGY experimental toothpaste, SD-SiO2 experimental toothpaste, and CC-CaCO3 experimental toothpaste. All samples were subjected to mechanical brushing protocol with 5000 cycles and kept in artificial saliva with daily exchanges. KHN was analyzed through the mixed linear model for repeated measures over time. Ra was analyzed through nonparametric Kruskal Wallis and Dunn tests to compare the groups. Paired Wilcoxon test was run to compare experimental times. ∆WID, ∆Eab*, and ∆E00 were analyzed through Kruskal Wallis and Dunn tests. All analyses were performed in R* software, at 5% significance level. EXP_SGY recorded higher KHN than EXP_SiO2 and EXP_CaCO3, whereas EXP_K showed increased Ra in comparison to CMP (p = 0.0229). ∆Eab and ∆E00 were significantly higher in the CT12, EXP_SiO2, and EXP_CaCO3 groups than in the NC and EXP_K (p < 0.0001). There were no significant changes in ∆WID (p = 0.0852). According to SEM results, toothbrushing with experimental toothpastes added with mineral clay types did not have significant impact on enamel's polishing and smoothness. CLINICAL RELEVANCE: Mineral clays have a broad application in the cosmetic industry, and recently, they have been used in the formulation of vegan toothpaste.

Xylitol associated or not with fluoride: Is the action the same on de- and remineralization?

OBJECTIVES: This study evaluated the effect of xylitol combined or not with fluoride (F) on reduction of demineralization and increase of remineralization of shallow and deep artificial enamel lesions. METHODS: Bovine enamel samples were allocated to the following solutions groups: no xylitol (negative control), 5% xylitol, 10% xylitol, 20% xylitol, 500 ppm F (as NaF), 5% xylitol+F, 10% xylitol+F or 20% xylitol+F (n = 12-15). For the demin study, a pH-cycling model (demineralization-6 h, pH 4.7/remineralization 18 h, pH 7.0) was employed for 7 days. Treatments were applied 2 × 1 min. In the remin study, specimens were pre-demineralized for 2, 5 or 10 days. Afterwards, a pH-cycling protocol was conducted (2 h demineralizing and 22 h remineralizing solution/day for 8 days) and the same treatments were done. The response variables were percentage surface hardness loss (%SHL) and transverse microradiography. Data were analyzed by RM ANOVA/Tukey or Kruskal-Wallis/Dunn (p < 0.05) RESULTS: F and Xylitol combined with F reduced the %SHL (23-30%) compared to the negative control (61.5%). The integrated mineral loss and the lesion depth were not reduced by any treatment. Surface hardness recovery was seen only for shallow lesions in case of 20% xylitol+F compared to negative control. No lesion depth recovery, but significant mineral recovery was seen for F (2-days and 10-days lesion). CONCLUSIONS: All concentrations of xylitol+F reduced enamel surface demineralization, while only 20% xylitol+F improved surface remineralization of shallow lesions in vitro. CLINICAL SIGNIFICANCE: Our results suggest that while F or any concentration of xylitol + F reduces surface demineralization, only 20% xylitol+F improves surface remineralization of shallow lesions in vitro. Therefore, xylitol may be added into oral products, combined to F, to control dental caries.

Effect of nanometric ß-calcium glycerophosphate supplementation in conventional toothpaste on enamel demineralization: An in vitro study.

The aim of this study was to evaluate the effects of supplementing toothpastes containing 1100 ppm F with micrometric or nanometric [beta]-calcium glycerophosphate (ß-CaGPm/ß-CaGPn) on artificial enamel demineralization, using a pH cycling model. Bovine enamel blocks (4 mm × 4 mm, n = 120) selected using initial surface hardness were randomly allocated to ten toothpaste groups (n = 12): without fluoride or ß-CaGPm or ß-CaGPn (Negative control), 1100 ppm F (1100 F), and 1100 ppm F plus 0.125%, 0.25%, 0.5%, and 1.0% of ß-CaGPm or ß-CaGPn. Blocks were treated two times per day with toothpaste slurry and subjected to five pH cycles (demineralizing and remineralizing solutions) at 37 °C. The final surface hardness, percentage of surface hardness loss (%SH), cross-sectional hardness (ΔKHN), and profile analysis and lesion depth subsurface were analysed using polarized light microscopy (PLM). Fluoride (F), calcium (Ca), and phosphorus (P) concentrations were also measured. Data were analysed using ANOVA and Student-Newman-Keuls tests ([alpha] = 0.001). Blocks treated with 1100 F toothpaste containing 0.5%ß-CaGPm or 0.25%ß-CaGPn showed with reduced %SH values when compared with those treated with 1100 F alone (p < 0.001). Reduced lesion depths (ΔKHN and PLM) were observed for the slurry made up of 1100 F and 0.25%ß-CaGPn (p < 0.001). The addition of ß-CaGPm and ß-CaGPn did not influence the enamel F concentration, with the 1100 F/0.25%ß-CaGPn group exhibiting the highest Ca and P enamel concentrations (p < 0.001). Based on the findings of this in vitro study, we can conclude that the fluoride toothpaste produced a superior effect when combined at an appropriate ß-CaGP molar ratio. This effect was achieved with a lower proportion of ß-CaGP in the form of nanometric particles.

Association between molar hypomineralization, genes involved in enamel development, and medication in early childhood: A preliminary study.

BACKGROUND: Molar hypomineralization (MH) is defined as a multifactorial condition, and thus, its presence may be defined by interactions between environmental and genetic factors. AIM: To evaluate the association between MH, genes involved in enamel development, and the use of medication during pregnancy in early childhood. DESIGN: One hundred and eighteen children, 54 with and 64 without MH, were studied. The data collected included demographics, socioeconomic data, and the medical history of mothers and children. Genomic DNA was collected from saliva. Genetic polymorphisms in ameloblastin (AMBN; rs4694075), enamelin (ENAM; rs3796704, rs7664896), and kallikrein (KLK4; rs2235091) were evaluated. These genes were analyzed by real-time polymerase chain reaction using TaqMan chemistry. The software PLINK was used to compare allele and genotype distributions of the groups and to assess the interaction between environmental variables and genotypes (p < .05). RESULTS: The variant allele KLK4 rs2235091 was associated with MH in some children (odds ratio [OR]: 3.75; 95% confidence interval [CI] = 1.65-7.81; p = .001). Taking medications in the first 4 years of life was also associated with MH (OR: 2.94; 95% CI = 1.02-6.04; p = .041) and specifically in association with polymorphisms in ENAM, AMBN, and KLK4 (p < .05). The use of medications during pregnancy was not associated with MH (OR: 1.37; 95% CI = 0.593-3.18; p = .458). CONCLUSION: The results of this study suggest that taking medication in the postnatal period appears to contribute to the etiology of MH in some evaluated children. There may be a possible genetic influence of polymorphisms in the KLK4 gene with this condition.