RESUMEN
The ridges of the dermal denticles of migratory sharks have inspired riblets to reduce the frictional drag of a fluid. In particular, the dermal denticles of white sharks (Carcharodon carcharias) are characterized by a high middle ridge and low side ridges. The detailed morphology of their denticles and their variation along the body, however, have never been investigated. Moreover, the hydrodynamic function of high-low combinations of ridges is unknown. In this article, the ridge spacings and heights of the white shark denticles were three-dimensionally quantified using microfocus X-ray computed tomography. Then, the swimming speed at which the ridges would reduce drag was hydrodynamically calculated with a flat plate body model and previous riblet data. High ridges with a large spacing were found to effectively reduce drag at a migration speed of 2.3 m s-1, while adjacent high and low ridges with a small spacing reduced drag at a burst hunting speed of 5.1 m s-1. Moreover, the above hydrodynamic calculation method was also applied to the shortfin mako shark and an extinct giant shark (called megalodon) with known ridge spacings, resulting in the estimated hunting speeds of 10.5 m s-1and 5.9 m s-1, respectively.
Asunto(s)
Tiburones , Natación , Animales , Tiburones/anatomía & histología , Tiburones/fisiología , Natación/fisiología , Hidrodinámica , Modelos BiológicosRESUMEN
The automotive industry continuously enhances vehicle design to meet the growing demand for more efficient vehicles. Computational design and numerical simulation are essential tools for developing concept cars with lower carbon emissions and reduced costs. Underground roads are proposed as an attractive alternative for reducing surface congestion, improving traffic flow, reducing travel times and minimizing noise pollution in urban areas, creating a quieter and more livable environment for residents. In this context, a concept car body design for underground tunnels was proposed, inspired by the mako shark shape due to its exceptional operational kinetic qualities. The proposed biomimetic-based method using computational fluid dynamics for engineering design includes an iterative process and car body optimization in terms of lift and drag performance. A mesh sensitivity and convergence analysis was performed in order to ensure the reliability of numerical results. The unique surface shape of the shark enabled remarkable aerodynamic performance for the concept car, achieving a drag coefficient value of 0.28. The addition of an aerodynamic diffuser improved downforce by reducing 58% of the lift coefficient to a final value of 0.02. Benchmark validation was carried out using reported results from sources available in the literature. The proposed biomimetic design process based on computational fluid modeling reduces the time and resources required to create new concept car models. This approach helps to achieve efficient automotive solutions with low aerodynamic drag for a low-carbon future.
RESUMEN
Superhydrophobic surfaces hold immense potential in underwater drag reduction. However, as the Reynolds number increases, the drag reduction rate decreases, and it may even lead to a drag increase. The reason lies in the collapse of the air mattress. To address this issue, this paper develops a pyramid-shaped robust superhydrophobic surface with wedged microgrooves, which exhibits a high gas fraction when immersed underwater and good ability to achieve complete spreading and recovery of the air mattress through air replenishment in the case of collapse of the air mattress. Pressure drop tests in a water tunnel confirm that with continuous air injection, the drag reduction reaches 64.8% in laminar flow conditions, substantially greater than 38.4% in the case without air injection, and can achieve 50.8% drag reduction in turbulent flow. This result highlights the potential applications of superhydrophobic surfaces with air mattress recovery for drag reduction.
RESUMEN
Underwater superhydrophobic surfaces stand as a promising frontier in technological applications such as drag reduction, antifouling, and anticorrosion. Unfortunately, the air film, known as the plastron, on these surfaces tends to be unstable. To address this problem, active approaches have been designed to preserve or restore plastrons. In this work, a self-driven gas spreading superhydrophobic mesh (SHM) surface is designed to facilitate recovery of the plastron. The immersed SHM can be "wetted" by gas, even when the plastron is removed. We demonstrate that the injected gas can spread spontaneously along the SHM over a large area, which greatly simplifies the plastron replenishment process. By incorporating a locally coated gas-producing layer, we achieve rapid in situ plastron recovery and long-term immersion stability, extending the plastron lifespan by at least 48 times. We also provide a framework for designing an SHM with suitable structural dimensions for gas spreading. Furthermore, an SHM with asymmetric structural dimensions enables unidirectional gas transport by the capillary pressure difference. This SHM surface shows excellent drag reduction properties (37.2%) and has a high slip recovery coefficient (73.4%) after plastron loss. This facile and scalable method is expected to broaden the range of potential applications involving nonwetting-related fields.
RESUMEN
Reducing resistance to surface friction is challenging in the field of engineering. Natural biological systems have evolved unique functional surfaces or special physiological functions to adapt to their complex environments over centuries. Among these biological wonders, fish, one of the oldest in the vertebrate group, have garnered attention due to their exceptional fluid dynamics capabilities. Fish skin has inspired innovation in reducing surface friction due to its unique structures and material properties. Herein, drawing inspiration from the unique properties of fish scales, a periodic array of fish scales was fabricated by laser ablation on a polished aluminum template. The morphology of the biomimetic fish scale surface was characterized using scanning electron microscopy and a white-light interfering profilometer. Drag reduction performance was measured in a closed circulating water tunnel. The maximum drag reduction was 10.26% at a Reynolds number of 39,532, and the drag reduction performance gradually decreased with an increase in the distance between fish scales. The mechanism of the biomimetic drag reduction surface was analyzed using computational fluid dynamics. Streamwise vortices were generated at the valley of the biomimetic fish scale, replacing sliding friction with rolling friction. These results are expected to provide a foundation for in-depth analysis of the hydrodynamic performance of fish and serve as new inspiration for drag reduction and antifouling.
RESUMEN
This paper addresses the critical role of drag reduction technology in the evolution of road vehicle design amidst the ongoing climate crisis. With transportation accounting for a substantial portion of the EU's greenhouse gas emissions, the shift towards alternatively powered vehicles highlights the need for innovative solutions to extend range, reduce fuel consumption, and lower emissions. This review thoroughly outlines the literature on appendable drag reduction devices, encompassing both passive and active techniques, and their applicability across a variety of road vehicles, including light and heavy-duty transport. Methods applied to simplified bodies such as the Ahmed or other commonly studied generic bluff bodies are clearly distinguished from those applied to more detailed road vehicles, where results hold greater practical significance due to authentic geometry. A combination of both wind tunnel and CFD works are outlined with insights given into how advancements in both computing power and CFD will greatly enhance the future outputs of drag reduction research for road vehicles. Finally, an outlook is provided on the future of the technology and how increased consumer demand for configurable vehicles will encourage increased engagement between drag reduction device manufacturers and automakers to improve the device mounting process.
RESUMEN
Many species of plants and animals show an ability to resist fouling with surface topographies tailored to their environments. The mollusk species Dosinia juvenilis has demonstrated the ability to resist the accumulation of fouling on its outer surface. Understanding the functional mechanism employed by nature represents a significant opportunity for the persistent challenges of many industrial and consumer applications. Using a biomimetic approach, this study investigates the underlying hydrodynamic mechanisms of fouling resistance through Large Eddy simulations of a turbulent boundary layer above a novel ribletted surface topography bio-inspired by the Dosinia juvenilis. The results indicate a maximum drag reduction of 6.8% relative to a flat surface. The flow statistics near the surface are analogous to those observed for other ribletted surfaces in that the appropriately sized riblets effectively reduce the spanwise and wall-normal velocity fluctuations near the surface. This study supports the understanding that nature employs ribletted surfaces toward multiple functionalities including the considered drag reduction and fouling resistance.
RESUMEN
This review explores the present knowledge of the unique properties of shark skin and possible applications of its functionalities, including drag reduction and swimming efficiency. Tooth-like denticles, with varied morphologies, sizes, and densities across the shark's body, significantly influence the flow and interaction of fluids. Examining dermal denticle morphology, this study unveils the functional properties of real shark skin, including mechanical properties such as stiffness, stress-strain characteristics, and denticle density's impact on tensile properties. The adaptive capabilities of the Mako shark scales, especially in high-speed swimming, are explored, emphasizing their passive flow-actuated dynamic micro-roughness. This research contains an overview of various studies on real shark skin, categorizing them into skin properties, morphology, and hydrodynamics. The paper extends exploration into industrial applications, detailing fabrication techniques and potential uses in vessels, aircraft, and water pipes for friction reduction. Three manufacturing approaches, bio-replicated forming, direct fabrication, and indirect manufacturing, are examined, with 3D printing and photoconfiguration technology emerging as promising alternatives. Investigations into the mechanical properties of shark skin fabrics reveal the impact of denticle size on tensile strength, stress, and strain. Beyond drag reduction, the study highlights the shark skin's role in enhancing thrust and lift during locomotion. The paper identifies future research directions, emphasizing live shark testing and developing synthetic skin with the help of 3D printing incorporating the bristling effect.
Asunto(s)
Biomimética , Tiburones , Piel , Tiburones/fisiología , Tiburones/anatomía & histología , Animales , Biomimética/métodos , Resistencia a la Tracción/fisiología , Natación/fisiología , Fenómenos Fisiológicos de la Piel , Fenómenos Biomecánicos , Materiales Biomiméticos/química , Impresión Tridimensional , HidrodinámicaRESUMEN
In the practical application of hydraulic rotating machinery, it is essential to thoroughly explore drag reduction and rheological characteristics of drag-reducing additives to optimize machinery efficiency and reduce equipment consumption. This paper combines simulation and experimental approaches to investigate the drag-reduction performance and rheological properties of drag-reducing additives. Numerical simulations are initially conducted to investigate the shear-thinning properties of drag-reducing fluid and explore variations in drag-reduction rate. Turbulent phenomena characteristics are described by analyzing turbulent statistical quantities. Subsequently, the rheological behaviors of polyethylene oxide (PEO), cetyltrimethyl ammonium chloride (CTAC), and their mixed solutions under different conditions are scrutinized using a rotational rheometer. The findings indicate that the drag reduction effect amplifies as the rheological index n and characteristic time λ decrease. The numerical simulations show a maximum drag reduction rate of 20.18%. In rheological experiments, a three-stage viscosity variation is observed in single drag-reducing additives: shear thickening, shear thinning, and eventual stabilization. Composite drag-reducing additives significantly reduce the apparent viscosity at low shear rates, thereby strengthening the shear resistance of the system.
RESUMEN
This study investigates the effects of an air layer on drag reduction and turbulence dynamics in channel flow over a superhydrophobic surface (SHS). Employing the OpenFOAM platform, direct numerical simulation was conducted to investigate turbulent channel flow with an air layer over an SHS. The simulations, which take into account the interaction between water and air, analyze various parameters such as velocity distribution, drag reduction (DR), Reynolds stress, turbulent kinetic energy (TKE), and coherent structures near the water-air interface. The presence of an air layer significantly alters the velocity distribution, leading to higher velocities at the interface compared to simulations without the air layer. Notably, the thickness of the air layer emerges as an important factor, with larger thicknesses resulting in increased velocities and drag reduction. This study underscores the substantial impact of the air layer on TKE near the superhydrophobic surface, emphasizing its role in understanding and optimizing drag reduction. Furthermore, the nonlinear relationship between slip velocity, Q contours, and coherent structures near the SHS are investigated.
RESUMEN
Surface-initiated iron(0)-mediated controlled radical polymerization (SI-Fe0CRP) with low toxicity and excellent biocompatibility is promising for the fabrication of biofunctional polymer coatings. However, the development of Fe(0)-based catalysts remains limited by the lower dissociation activity of the Fe(0) surface in comparison to Cu(0). Here, we found that, by simply polishing the Fe(0) plate surface with sandpaper, the poly(methacryloyloxy)ethyl trimethylammonium chloride brush growth rate has been increased significantly to 3.3 from 0.14 nm min-1 of the pristine Fe(0) plate. The excellent controllability of roughness-mediated SI-Fe0CRP can be demonstrated by customizing multicompartment brushes and triblock brushes. Furthermore, we found that the resulting polymer brush coatings exhibit remarkably low water adhesion (0.097 mN) and an outstanding drag reduction rate of 52% in water. This work provides a promising strategy for regulating the grafting rate of polymer brushes via SI-Fe0CRP for biocompatible marine drag reduction coatings.
RESUMEN
Slippery surfaces, which originate in nature with special wettability, have attracted considerable attention in both fundamental research and practical applications in a variety of fields due to their unique characteristics of superlow liquid friction and adhesion. Although research on bioinspired slippery surfaces is still in its infancy, it is a rapidly growing and enormously promising field. Herein, a systematic review of recent progress in bioinspired slippery surfaces, beginning with a brief introduction of several typical creatures with slippery property in nature, is presented. Subsequently,this review gives a detailed discussion on the basic concepts of the wetting, friction, and drag from micro- and macro-aspects and focuses on the underlying slippery mechanism. Next, the state-of-the-art developments in three categories of slippery surfaces of air-trapped, liquid-infused, and liquid-like slippery surfaces, including materials, design principles, and preparation methods, are summarized and the emerging applications are highlighted. Finally, the current challenges and future prospects of various slippery surfaces are addressed.
RESUMEN
The microstructured superhydrophobic surface serves as an alternative strategy to decrease resistance of underwater vehicles, but the sustainment of an entrapped air layer and the stability of the corresponding gas-liquid interface within textures in flow shear or high pressure are still a great challenge. Inspired by the scales of Parantica melaneus wings, we propose a biomimetic surface with a hierarchical structure featuring longitudinal ridges and regular cavities that firmly pin the gas-liquid interface. The drag reduction rate of the Butterfly Wing Scale-Like Surface (BWSLS) demonstrates a noticeable rise over the single-scale textured mainstream biomimetic surfaces at moderate Reynolds numbers. The superior drag reduction mechanism is revealed as the synergistic effect of a thicker gas film and a more pronounced secondary vortex within the hierarchical textures. The former reduces the velocity gradient near the surface, while the latter decreases the vorticity and energy dissipation. In a high hydrostatic pressure environment, the proposed surface also demonstrates significant stability of the gas-liquid interface, with a gas coverage rate of over 67% during the cyclic loading, surpassing single-structured surfaces. Our study suggests promising surface designs for optimal drag reduction by mimicking and leveraging diverse surfaces of organisms adapted to oceanic climates.
RESUMEN
The diffuser is a critical component in sports cars, enhancing aerodynamics by increasing downforce and reducing drag. Previous studies have focused on its dependence on diffuser incidence, height, and base pressure. The design of the car, particularly the rear end shape and the rear wing's presence, affect base pressure and the diffuser's performance. Previous studies have investigated the effects of diffuser geometry on aerodynamic performance, but the current study is the first to examine the relationship between the diffuser and the rear tires. It also provides specific and quantitative results on the impact of different diffuser design parameters on drag and downforce. The relationship between the rear tires and the double-element inverted wing diffuser using computational fluid dynamics (CFD) was investigated. This is an essential problem because the diffuser is a critical component of sports cars, and its design can significantly impact aerodynamic performance. CFD was used to simulate the flow of air around the car model. The CFD model was based on the Nissan Sunny (Versa) type Almera design, and the diffuser main element and flap wing angles were set at 4 and 15.5°, respectively. The flap gap, overlap distance, and wing ride height above the ground were varied to achieve an optimal aerodynamic design. The study found that the wing's ride height significantly influences the flow through the diffuser. The diffuser significantly impacts base pressure and downforce production. Increasing the ride height decreases base pressure, leading to an increase in downforce until a specific point near the car body, where downforce further increases. The study concluded that the best double-element diffuser design was selected based on lift-to-drag results and the allowable dimensions of the car, wing ride height, element gap, and overlap distances. Ultimately, the best diffuser wing design features a ride height of 154 mm, a gap distance of 10 mm, and an overlap of 5 mm. This design reduces drag by approximately 2.7 % and remarkably increases downforce ten times compared to the baseline car model.
RESUMEN
The use of additives, generally called DRAs (Drag Reducing Additives), has been proposed to re-duce the energy consumption in pressurized pipes. Although many research works have been conducted to analyze the effect of these additives, less attention have been devoted to the application of coatings to the pipe wall. This paper demonstrates that the application of a hydrophobic coating to the pipe can lead to a head loss reduction for a transition flow regime with moderate Reynolds number values (Re). For this purpose, an experiment was conducted to compare the performance of both coated and uncoated pipes by measuring the head losses and assessing the Drag Reduction Percentage (%DR) and the pipe friction factor (f). This was done for two Polyvinylchloride (PVC) pipes with different nominal diameters (PVC90 and PVC63). In addition, the flow velocity distribution was also measured in all these tests. The %DR decreased as the Re values increased, with the reduction being notably less pronounced for higher Re values. This could be explained by the fact that a partial slip condition is induced by the hydrophobic product. Its effect is significant for a transition regime where the effect of viscosity is important, but it becomes negligible for increasing levels of turbulence. No significant differences were observed in the flow distribution between coated and uncoated pipes, which seems to indicate that the velocity change could be limited to the near-wall viscous sublayer. The results of this work open an important research line aimed at reducing energy costs and the carbon footprint in pipe fluid distribution systems.
RESUMEN
Efforts to enhance the speed and reduce the energy consumption of underwater vehicles have led to the proposal of a novel mucus release structure inspired by the secretion of mucus cells on fish skin. This structure features interconnected microgrooves with excellent flexibility for adjusting to different states, effectively reducing drag through mucus release. Numerical analysis of the drag reduction performance of the mucous-releasing micro-pore structure was conducted using ANSYS Fluent 19.2 software. This structure is capable of reducing the velocity gradient near the wall and, owing to the presence of micro-pore structures, decreasing the overall compressed area, thereby achieving drag reduction effects. The experimental results revealed a drag reduction effect of 20.56% when the structure was bent at an angle of 120°. The drag reduction varied under different attitudes such as tension and compression. This mucus release structure achieves reusability through a direct mucous injection process. This research provides valuable insights for the drag reduction study of underwater vehicles, such as ships and submarines, laying a foundation for advancing the development and applications of this field in the future.
RESUMEN
Superhydrophobic surfaces (SHS) offer versatile applications by trapping an air layer within microstructures, while water jet impact can destabilize this air layer and deactivate the functions of the SHS. The current work presents for the first time that introducing parallel hydrophilic strips to SHS (SHS-s) can simultaneously improve both water impalement resistance and drag reduction (DR). Compared with SHS, SHS-s demonstrates a 125% increase in the enduring time against the impact of water jet with velocity of 11.9 m/s and a 97% improvement in DR at a Reynolds number of 1.4 × 104. The key mechanism lies in the enhanced stability of the air layer due to air confinement by the adjacent three-phase contact lines. These lines not only impede air drainage through the surface microstructures during water jet impact, entrapping the air layer to resist water impalement, but also prevent air floating up due to buoyancy in Taylor-Couette flow, ensuring an even spread of the air layer all over the rotor, boosting DR. Moreover, failure modes of SHS under water jet impact are revealed to be related to air layer decay and surface structure destruction. This mass-producible structured surface holds the potential for widespread use in DR for hulls, autonomous underwater vehicles, and submarines.
RESUMEN
Biomimetics, which draws inspiration from nature, has emerged as a key approach in the development of underwater vehicles. The integration of this approach with computational fluid dynamics (CFD) has further propelled research in this field. CFD, as an effective tool for dynamic analysis, contributes significantly to understanding and resolving complex fluid dynamic problems in underwater vehicles. Biomimetics seeks to harness innovative inspiration from the biological world. Through the imitation of the structure, behavior, and functions of organisms, biomimetics enables the creation of efficient and unique designs. These designs are aimed at enhancing the speed, reliability, and maneuverability of underwater vehicles, as well as reducing drag and noise. CFD technology, which is capable of precisely predicting and simulating fluid flow behaviors, plays a crucial role in optimizing the structural design of underwater vehicles, thereby significantly enhancing their hydrodynamic and kinematic performances. Combining biomimetics and CFD technology introduces a novel approach to underwater vehicle design and unveils broad prospects for research in natural science and engineering applications. Consequently, this paper aims to review the application of CFD technology in the biomimicry of underwater vehicles, with a primary focus on biomimetic propulsion, biomimetic drag reduction, and biomimetic noise reduction. Additionally, it explores the challenges faced in this field and anticipates future advancements.
RESUMEN
Marine biofouling, resulting from the adhesion of marine organisms to ship surfaces, has long been a significant issue in the maritime industry. In this paper, we focused on utilizing soft and hydrophilic hydrogels as a potential approach for antifouling (AF) coatings. Acrylic acid (AA) with a polyelectrolyte effect and N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SBMA) with an antipolyelectrolyte effect were selected as monomers. By adjusting the monomer ratio, we were able to create hydrogel coatings that exhibited low swelling ratio in both fresh water and seawater. The Al(OH)3 nanoparticle, as a physical cross-linker, provided better mechanical properties (higher tensile strength and larger elongation at break) than the chemical cross-linker through the dynamic coordination bonds and plentiful hydrogen bonds. Additionally, we incorporated trehalose into the hydrogel, enabling the repair of the hydrogel network through covalent-like hydrogen bonding. The zwitterion compound SBMA endowed the hydrogel with excellent AF performance. It was found that the highest SBMA content did not lead to the best antibacterial performance, as bacterial adhesion quantity was also influenced by the charge of the hydrogel. The hydrogel with appropriate SBMA content being close to electrical neutrality exhibits the strongest zwitterionic property of PSBMA chains, resulting in the best antibacterial adhesion performance. Furthermore, the pronounced hydrophilicity of SBMA enhanced the lubrication of the hydrogel surface, thereby reducing the friction resistance when applied to the hull surface during ship navigation.
RESUMEN
Superhydrophobicity (SHP) is an incredible phenomenon of extreme water repellency of surfaces ubiquitous in nature (E.g. lotus leaves, butterfly wings, taro leaves, mosquito eyes, water-strider legs, etc). Historically, surface exhibiting water contact angle (WCA) > 150° and contact angle hysteresis <10° is considered as SHP. The SHP surfaces garnered considerable attention in recent years due to their applications in anti-corrosion, anti-fouling, self-cleaning, oil-water separation, viscous drag reduction, anti-icing, etc. As corrosion and marine biofouling are global problems, there has been focused efforts in combating these issues using innovative environmentally friendly coatings designs taking cues from natural SHP surfaces. Over the last two decades, though significant progress has been made on the fabrication of various SHP surfaces, the practical adaptation of these surfaces for various applications is hampered, mainly because of the high cost, non-scalability, lack of simplicity, non-adaptability for a wide range of substrates, poor mechanical robustness and chemical inertness. Despite the extensive research, the exact mechanism of corrosion/anti-fouling of such coatings also remains elusive. The current focus of research in recent years has been on the development of facile, eco-friendly, cost-effective, mechanically robust chemically inert, and scalable methods to prepare durable SHP coating on a variety of surfaces. Although there are some general reviews on SHP surfaces, there is no comprehensive review focusing on SHP on metallic and alloy surfaces with corrosion-resistant and antifouling properties. This review is aimed at filling this gap. This review provides a pedagogical description with the necessary background, key concepts, genesis, classical models of superhydrophobicity, rational design of SHP, coatings characterization, testing approaches, mechanisms, and novel fabrication approaches currently being explored for anticorrosion and antifouling, both from a fundamental and practical perspective. The review also provides a summary of important experimental studies with key findings, and detailed descriptions of the evaluation of surface morphologies, chemical properties, mechanical, chemical, corrosion, and antifouling properties. The recent developments in the fabrication of SHP -Cr-Mo steel, Ti, and Al are presented, along with the latest understanding of the mechanism of anticorrosion and antifouling properties of the coating also discussed. In addition, different promising applications of SHP surfaces in diverse disciplines are discussed. The last part of the review highlights the challenges and future directions. The review is an ideal material for researchers practicing in the field of coatings and also serves as an excellent reference for freshers who intend to begin research on this topic.