Early and swift identification of fungal-infection using infrared spectroscopy.

Fungal pathogens pose significant threats to agricultural crops and food products, leading to economic losses, compromised food quality, and health hazards. Early detection is crucial for effective control and treatment. This study explores Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy for rapid fungal detection in bread. Using a machine learning algorithm (Random Forest), FTIR-ATR accurately distinguished between pure and infected bread samples, achieving 86% overall accuracy and 84% accuracy in identifying specific fungi like Rhizopus and Aspergillus on the first day of infection. These findings highlight FTIR-ATR's potential for early fungal infection detection, promising improved food quality and reduced economic losses through timely intervention.

Determination of spectroscopy marker of atherosclerotic carotid stenosis using FTIR-ATR combined with machine learning and chemometrics analyses.

Atherosclerotic carotid stenosis (ACS) is a recognized risk factor for ischemic stroke. Currently, the gold diagnostic standard is Doppler ultrasound, the results of which do not provide certainty whether a given person should be qualified for surgery or not, because in some patients, carotid artery stenosis, for example at the level of 70 %, does not cause ischemic stroke in others yes. Therefore, there is a need for new methods that will clearly indicate the marker qualifying the patient for surgery. In this article we used Fourier Transform InfraRed Attenuated Total Reflectance (FTIR-ATR) spectra of serum collected from healthy and patients suffering from ACS, which had surgery were analyzed by machine learning and Principal Component Analysis (PCA) to determine chemical differences and spectroscopy marker of ACS. PCA demonstrated clearly differentiation between serum collected from healthy and non-healthy patients. Obtained results showed that in serum collected from ACS patients, higher absorbances of PO2- stretching symmetric, CH2 and CH3 symmetric and asymmetric and amide I vibrations were noticed than in control group. Moreover, lack of peak at 1106 cm-1 was observed in spectrum of serum from non-control group. As a result of spectral shifts analysis was found that the most important role in distinguishing between healthy and unhealthy patients is played by FTIR ranges caused by vibrations of PO2- phospholipids, amides III, II and CO lipid vibrations. Continuing, peaks at 1636 cm-1 and 2963 cm-1 were proposed as a potential spectroscopy markers of ACS. Finally, accuracy of obtained results higher than 90 % suggested, that FTIR-ATR can be used as an additional diagnostic tool in ACS qualifying for surgery.

Uncoated gold nanoparticles create fewer and less localized defects in model prokaryotic than in model eukaryotic lipid membranes.

The rise of the populations of antibiotic resistant bacteria represents an increasing threat to human health. In addition to the synthesis of new antibiotics, which is an extremely expensive and time-consuming process, one of the ways to combat bacterial infections is the use of gold nanoparticles (Au NPs) as the vehicles for targeted delivery of therapeutic drugs. Since such a strategy requires the investigation of the effect of Au NPs (with and without drugs) on both bacterial and human cells, we investigated how the presence of coating-free Au NPs affects the physicochemical properties of lipid membranes that model prokaryotic (PRO) and eukaryotic (EU) cells. PRO/EU systems prepared as multilamellar liposomes (MLVs) and hybrid structures (HSs) from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylglycerol (DPPG)/1,2-dipalmitoyl-sn-glycero-3-phosphoserine (DPPS) in the absence (MLVs)/presence (HSs) of differently distributed Au NPs (sizes ∼20 nm) reported stabilization of the gel phase of PRO systems in comparison with EU one (DSC data of PRO/EU were Tm(MLVs) ≈ 41.8 °C/42.0 °C, Tm¯ (HSs) ≈ 43.1 °C/42.4 °C, whereas UV-Vis response Tm(MLVs) ≈ 41.5 °C/42.0 °C, Tm¯ (HSs) ≈ 42.9 °C/41.1 °C). Vibrational spectroscopic data unraveled a substantial impact of Au NPs on the non-polar part of lipid bilayers, emphasizing the increase of kink and gauche conformers of the hydrocarbon chain. By interpreting the latter as Au NPs-induced defects, which exert the greatest effect when Au NPs are found exclusively outside the lipid membrane, these findings suggested that Au NPs reduced the compactness of EU-based lipid bilayers much more than in analogous PRO systems. Since the uncoated Au NPs manifested adverse effects when applied as antimicrobials, the results obtained in this work contribute towards recognizing AuNP functionalization as a strategy in tuning and reversing this effect.

Uranium mining effluents: What about the re-use of mining wastes to improve the bioproduction of industrially relevant bioactive compounds?

The shift towards a circular economy, where waste generation is minimized through waste re-use and the development of valorization strategies, is crucial for the establishment of a low carbon, sustainable, and resource-efficient economy. However, there is a lack of strategies for re-using and valorizing specific types of waste, particularly those containing naturally occurring radioactive materials (NORM), despite the prevalence of industrial activities that produce such waste due to their chemical and radiological hazards. Living organisms, including fungi, are valuable sources of bioactive compounds with various industrial applications. In this study, we assessed the growth and metabolic profile changes of three white rot fungi species in response to low concentrations of a uranium mine effluent containing NORM and metals to explore their potential for producing biotechnologically relevant bioactive compounds. The growth rate was assessed in three different culture media, with and without the uranium mine effluent (1% V/V)), and the metabolic profile was analyzed using FTIR-ATR spectroscopy. Results suggested an improvement in growth rates in media containing the uranium mine effluent, although not statistically significant. T. versicolor showed promise in terms of bioactive compound production. The production of droplets during growth experiments and significant metabolic changes, associated with the production of bioactive compounds like laccase, melanin, and oxalic acid, were observed in T. versicolor grown in mYEPDA with the uranium mine effluent. These findings present new research opportunities for utilizing waste to enhance the biotechnological production of industrially relevant bioactive compounds and promote the development of circular economy strategies for re-using and valorizing NORM-containing waste.

Barnacle analysis as a microplastic pollution bioindicator on the East Coast of Surabaya.

Background: Plastic pollution is a significant issue on the East Coast of Surabaya, emphasizing the need to develop microplastic monitoring programs. Barnacles became one of the potential microplastic bioindicator species on the East Coast of Surabaya. This study aimed to characterize the visual and polymers of microplastics found in barnacles and assess their potential as a bioindicator species for microplastic pollution on the East Coast of Surabaya. Methods: Microplastic polymer analysis was performed using ATR-FTIR. Results: A total of 196 microplastic particles were found in barnacles, water, and sediment. The size of microplastics in barnacles, water, and sediment varied, with the size in barnacles dominated by class 1 (1-10 µm), in water by class 2 (10-50 µm), and in sediments by class 3 (50-100 µm). Fragments dominated the shape of microplastics in barnacles, while water and sediment were dominated by fiber. The microplastic color in barnacles, water, and sediment was dominated by blue, and the microplastic polymer composition on barnacles, water, and sediments was dominated by cellophane (36%). Amphibalanus amphitrite was found to be predominant and identified as a potential microplastic bioindicator because it is a cosmopolitan species. Its population was found to correlate positively with cellophane (CP) accumulation. The Pearson's correlation test between barnacle length and microplastic length at a = 0.05 was inversely proportional to r =  - 0.411 (p < 0.05), categorized as a strong enough correlation. These findings are essential in developing monitoring programs and mitigating the impact of microplastics on the marine environment.

Recovery of Proteases and Protease Inhibitors from Ganoderma spp. Cultivated in Amazonian Lignocellulose Wastes.

BACKGROUND: Ganoderma spp. are a great source of bioactive molecules. The production and recovery of bioactive molecules vary according to strain, growth substrate, and extraction solution. Variations in protease and their inhibitors in basidiomata from a commercial strain (G. lingzhi) and an Amazonian isolate (Ganoderma sp.) cultivated in Amazonian lignocellulosic wastes and extracted with different solutions are plausible and were investigated in our study. METHODS: Basidiomata from cultivation in substrates based on açaí seed, guaruba-cedro sawdust and three lots of marupá sawdust were submitted to extraction in water, Tris-HCl, and sodium phosphate. Protein content, proteases, and protease inhibitors were estimated through different assays. The samples were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR). RESULTS: Tris-HCl provided higher protein extraction from Ganoderma sp. and higher caseinolytic, gelatinolytic, and fibrinolytic activity for G. lingzhi cultivated in açaí. Water extracts of Ganoderma sp., in general, exhibited higher trypsin and papain inhibitor activities compared to G. lingzhi. Extracts in Tris-HCl and sodium phosphate showed more intense protein bands in SDS-- PAGE, highlighting bands of molecular weights around 100, 50, and 30 kDa. FTIR spectra showed patterns for proteins in all extracts, with variation in transmittance according to substrate and extractor. CONCLUSION: Water extract from Amazonian Ganoderma sp. cultivated in marupá wastes are promising as a source of protease inhibitors, while the Tris-HCL extract of G. lingzhi from açaí cultivation stands out as a source of proteases with fibrinolytic, caseinolytic, and gelatinolytic activities.

Enhancing Liquefaction Efficiency: Exploring the Impact of Pre-Hydrolysis on Hazelnut Shell (Corylus avellana L.).

Hazelnut shells (HS), scientifically known as Corylus avellana L. shells, are waste produced by companies that process nuts. The main objective of this study was to find an efficient way to maximize the chemical potential of HS by solubilizing the hemicelluloses, which could then be used to recover sugars and, at the same time, increase the lignin content of this material to produce adhesives or high-strength foams. In order to optimize the pre-hydrolysis process, two different temperatures (160 and 170 °C) and times varying from 15 to 180 min were tested. All the remaining solid materials were then liquefied using polyalcohols with acid catalysis. The chemical composition of hazelnut shells was determined before and after the pre-hydrolysis. All of the process was monitored using Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR) by determining the spectra of solids and liquids after the pre-hydrolysis and liquefaction steps. The highest solubilization of hazelnut shells was found for 170 °C and 180 min, resulting in a 25.8% solubilization. Chemical analysis after the hydrolysis process showed a gradual increase in the solubilization of hemicelluloses as both the temperature and time of the reactor were increased. Simultaneously, the percentages of α-cellulose and lignin in the material also increased with rises in temperature and duration. FTIR-ATR allowed for the detection of significant spectral changes in the hazelnut shells from their initial state to the solid residue and further into the liquefied phase. This confirmed that pre-hydrolysis was effective in enhancing the chemical composition of the material, making it more suitable for the production of adhesives, polyurethane foams, or in the production of bioplastics and composite materials, combined with other biopolymers or synthetic polymers to enhance the mechanical properties and biodegradability of the resulting materials.

Identification and morphological characterization of different types of plastic microparticles.

The knowledge of the polymeric composition of microplastics (MPs) is interesting because offers useful information on the resistance, durability, and degradability of these materials, also allowing progress in the control of this contamination. However, there is currently a lack of reliable standardized methods for the identification, and characterization of the plastic microparticles. This work uses different techniques in a complementary manner for the identification, and characterization of MPs that more frequently are found in the environment. A total of 10 types of plastics were collected (polystyrene (PS), polyethylene terephthalate (PETE), polyethylene (PE), high- and low-density polyethylene (HDPE and LDPE, respectively), polyvinyl chloride (PVC), polypropylene (PP), polytetrafluoroethylene (PTFE), Polyamide (PA, Nylon 6,6) and poly-carbonate (PC)) and their chemical identification were analyzed by reflectance-attenuated infrared (FTIR-ATR). Furthermore, the samples were observed using light microscopy, and scan-ning electron microscopy (SEM). Also, staining with 12 different dyes was performed to improve the identification of microplastics. The results of this study revealed that PETE, PE, HDPE and LDPE, whose SEM images exhibited smoothness and flat uniformity of their surface, were not (or less) susceptible to adsorb staining solutions while PP, PA, PVC, and PTFE, were capable of adsorbing the dye solutions.

Kelp forest food webs as hot spots for the accumulation of microplastic and polybrominated diphenyl ether pollutants.

Kelp forests (KFs) are one of the most significant marine ecosystems in the planet. They serve as a refuge for a wide variety of marine species of ecological and economic importance. Additionally, they aid with carbon sequestration, safeguard the coastline, and maintain water quality. Microplastic (MP) and polybrominated diphenyl ethers (PBDEs) concentrations were analyzed across trophic levels in KFs around Todos Santos Bay. Spatial variation patterns were compared at three sites in 2021 and temporal change at Todos Santos Island (TSI) in 2021 and 2022. We analyzed these MPs and PBDEs in water, primary producers (Macrocystis pyrifera), grazers (Strongylocentrotus purpuratus), predators (Semicossyphus pulcher), and kelp detritus. MPs were identified in all samples (11 synthetic and 1 semisynthetic polymer) and confirmed using Fourier-transform infrared microspectroscopy-attenuated total reflectance (µ-FTIR-ATR). The most abundant type of MP is polyester fibers. Statistically significant variations in MP concentration were found only in kelps, with the greatest average concentrations in medium-depth kelps from TSI in 2022 (0.73 ± 0.58 MP g-1 ww) and in the kelp detritus from TSI in 2021 (0.96 ± 0.64 MP g-1 ww). Similarly, PBDEs were found in all samples, with the largest concentration found in sea urchins from Punta San Miguel (0.93 ± 0.24 ng g-1 ww). The similarity of the polymers can indicate a trophic transfer of MPs. This study shows the extensive presence of MP and PBDE subtropical trophic web of a KF, but correlating these compounds in environmental samples is highly complex, influenced by numerous factors that could affect their presence and behavior. However, this suggests that there is a potential risk to the systems and the services that KFs offer.

Production and Evaluation of Set-Type Yoghurt Fortified with Chlorella vulgaris and Moringa oleifera Powder.

Considering the growing popularity of functional foods, fortifying yoghurt with natural ingredients with various flavours and appearances could improve its nutritional and health potential. The current study aimed to evaluate the effect of Chlorella vulgaris (0.3 and 0.5%) and Moringa oleifera (0.3 and 0.5%) on the fermentation kinetics, apparent viscosity, antioxidant activity, microbiological, sensorial, and FTIR properties of yoghurt during storage. The results demonstrated that the incorporation of Chlorella vulgaris and Moringa oleifera into yoghurt increased acidification rate and decreased fermentation time (p < 0.05). Moringa oleifera (0.5%) improved the growth and survival of lactic acid bacteria as well as the phenolic and antioxidant properties of yoghurt. However, Chlorella vulgaris, at a concentration of 0.5% reduced the viability of lactic acid bacteria, viscosity, total phenolic, and antioxidant properties of yoghurt. In conclusion, it was found that Chlorella vulgaris, at 0.3%, and Moringa oleifera improved the phenolic, antioxidant properties, and acidification rate of yoghurt.

Microplastic contamination in Ashtamudi Lake, India: Insights from a Ramsar wetland.

Estuaries function as temporary storage sites for plastic debris, influencing the distribution of microplastics (MPs) across ecosystems. This research delves into the presence of MPs in the water, sediment, fish, and shellfish of Ashtamudi Lake, a Ramsar wetland with brackish water located on the southwest coast of India. Given the lake's significance in supporting the livelihoods of numerous fishers and acting as a vital source of fishery resources for both local consumption and export, examining the contamination of the system by MPs becomes particularly pertinent. The highest percentage composition of MPs was found in macrofauna at 60.6% (with fish at 19.6% and shellfish at 40.9%), followed by sediment (22.8%) and water (16.7%). The primary types of MPs identified in all samples were fibers (35.6%), fragments (33.3%), and films (28%), with beads being the least represented at 3.03%. ATR-FTIR and Raman spectra analysis identified five polymers from shellfish (polypropylene, polyethylene, polystyrene, nylon, and polyvinyl chloride), five from fish guts (nylon, polypropylene, polyethylene, polyurethane, and polysiloxane), four in sediment (polypropylene, polyethylene, nylon, rayon), and four in water samples (polypropylene, polyethylene, nylon, and polystyrene). SEM-EDAX analysis of MPs obtained from the samples revealed degradation and the presence of inorganic elements such as Na, Mg, Al, Si, S, K, Cl, P, and Ca, as well as heavy metals like Pb, Mo, Rh, Pd, Ti, and Fe. The existence of these plastic polymers and heavy metals in microplastic samples poses a threat to vulnerable biota; people consume contaminated fish and shellfish, underscoring the importance of monitoring MPs in lake water. This investigation of MPs in Ashtamudi Lake highlights the system's susceptibility to plastic pollution and the bioavailability of smaller MPs to aquatic organisms. Identified sources of MPs in the lake include fishing and aquaculture activities, sewage pollution, improper solid waste management in lake watersheds, and unsustainable tourism. Upstream and downstream management interventions are recommended to address MP pollution in Ashtamudi Lake.

Interaction of KLAKLAK-NH2 and Analogs with Biomimetic Membrane Models.

BACKGROUND: Specifically designed peptide mimetics offer higher selectivity regarding their toxicity to mammalian cells. In addition to the α-helix conformation, the specific activity is related to the peptide's ability to penetrate the cell membrane. The alterations in lipid membrane properties were addressed in the presence of the peptide KLAKLAK-NH2 and analogs containing ß-alanine, strengthening the antibacterial activity and/or naphtalimide with proven anticancer properties. METHODS: The molecular interactions of the peptide mimetics with POPC bilayers were studied using FTIR-ATR spectroscopy. The thermal shape fluctuation analysis of quasispherical unilamellar vesicles was applied to probe the membrane bending elasticity. The impedance characteristics of bilayer lipid membranes were measured using fast Fourier-transform electrochemical impedance spectroscopy. RESULTS: A lateral peptide association with the membrane is reported for ß-alanine-containing peptides. The most pronounced membrane softening is found for the NphtG-KLßAKLßAK-NH2 analog containing both active groups that corroborate with the indications for 1,8-naphthalimide penetration in the lipid hydrophobic area obtained from the FTIR-ATR spectra analysis. The ß-alanine substitution induces strong membrane-rigidifying properties even at very low concentrations of both ß-alanine-containing peptides. CONCLUSIONS: The reported results are expected to advance the progress in tailoring the pharmacokinetic properties of antimicrobial peptides with strengthened stability towards enzymatic degradation. The investigation of the nonspecific interactions of peptides with model lipid membranes is featured as a useful tool to assess the antitumor and antimicrobial potential of new peptide mimetics.

Human erythrocytes under stress. Spectroscopic fingerprints of known oxidative mechanisms and beyond.

In this work, we investigated the oxidative stress-related biochemical alterations in red blood cells (RBCs) and their membranes with the use of spectroscopic techniques. We aimed to show their great advantage for the in situ detection of lipid classes and secondary structures of proteins without the need for their extraction in the cellular environment. The exposition of the cells to peroxides, t-butyl hydroperoxide (tBOOH) or hydrogen peroxide (H2O2) led to different degradation processes encompassing the changes in the composition of membranes and structural modifications of hemoglobin (Hb). Our results indicated that tBOOH is generally a stronger oxidizing agent than H2O2 and this observation was congruent with the activity of superoxide and glutathione peroxidase. ATR-FTIR and Raman spectroscopies of membranes revealed that tBOOH caused primarily the partial loss and peroxidation of the lipids resulting in loss of the integrity of membranes. In turn, both peroxides induced several kinds of damage in the protein layer, including the partial decrease of their content and irreversible aggregation of spectrin, ankyrin, and membrane-bound globin. These changes were especially pronounced on the membrane surface where stress conditions induced the formation of ß-sheets and intramolecular aggregates, particularly for tBOOH. Interestingly, nano-FTIR spectroscopy revealed the lipid peroxidative damage on the membrane surface in both cases. As far as hemoglobin was concerned, tBOOH and H2O2 caused the increase of the oxyhemoglobin species and conformational alterations of its polypeptide chain into ß-sheets. Our findings confirm that applied spectroscopies effectively track the oxidative changes occurring in the structural components of red blood cells and the simplicity of conducting measurements and sample preparation can be readily applied to pharmacological and clinical studies.

Abundance and distribution of microplastics on sandy beaches of the eastern Moroccan Mediterranean coast.

Microplastics (MPs) were investigated at 19 sandy beaches along the eastern Mediterranean Moroccan coast. Sediment samples (5 mm-63 µm) were analyzed to identify MPs abundance, size, shape, color and nature. MPs concentration ranged from 40 ± 7.4 to 230 ± 48.6 MPs kg-1; fibrous MPs were the most abundant (74.72 %), followed by fragments (20.26 %), films (3.27 %), pellets (1.42 %) and foams (0.33 %). Large MPs (1-5 mm) accounted for 58 %, while small (< 1 mm) for 42 %. The 1-2 mm fraction of sediments presented the greatest amounts (30.67 %) of MPs. Transparent (50 %) and blue (17 %) were most common colors and most of particles were angular and irregularly shaped. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed that PE (Polyethylene), PS (Polystyrene) and PP (Polypropylene) and PVC (Polyvinyl chloride) were the most common polymers. These findings revealed a moderate level of microplastic pollution along the beaches of the eastern Moroccan Mediterranean coast.

The presence of uncoated gold nanoparticle aggregates may alter the phase of phosphatidylcholine lipid as evidenced by vibrational spectroscopies.

Spherical structures built from uni- and multilamellar lipid bilayers (LUV and MLV) are nowadays considered not just as nanocarriers of various kinds of therapeutics, but also as the vehicles that, when coupled with gold (Au) nanoparticles (NPs), can also serve as a tool for imaging and discriminating healthy and diseased tissues. Since the presence of Au NPs or their aggregates may affect the properties of the drug delivery vehicle, we investigated how the shape and position of Au NP aggregates adsorbed on the surface of MLV affect the arrangement and conformation of lipid molecules. By preparing MLVs constituted from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) in the presence of uncoated Au NP aggregates found i) both within liposome core and on the surface of the outer lipid bilayer, or ii) adsorbed on the outer lipid bilayer surface only, we demonstrated the maintenance of lipid bilayer integrity by microscopic techniques (cryo-TEM, and AFM). The employment of SERS and FTIR-ATR techniques enabled us not only to elucidate the lipid interaction pattern and their orientation in regards to Au NP aggregates but also unequivocally confirmed the impact of Au NP aggregates on the persistence/breaking of van der Waals interactions between hydrocarbon chains of DPPC.

Identificação de polímeros de microplásticos encontrados no trato digestivo de peixes do Lago de Amatitlán, Guatemala / Identification of microplastic polymers found in the digestive tract of fish from Lake Amatitlán, Guatemala

O objetivo desta pesquisa foi a identificação, por meio de espectroscopia no infravermelho com transformada de Fourier combinada com reflectância total atenuada (FTIR-ATR), de microplásticos extraídos do trato gastrointestinal de peixes coletados no Lago de Amatitlán, para determinar os principais polímeros e a possível origem da contaminação por esses materiais. Foram analisados 68 microplásticos, correspondendo a 10% do total de microplásticos extraídos. Estes originaram-se de 36 espécimes, sendo 35 da espécie Oreochromis niloticus e um de Parachromis managuensis, dos quais foram analisados de 1 a 5 microplásticos por espécime. Os polímeros identificados foram polipropileno (PP), nylon, polietileno de alta densidade (HDPE), tereftalato de polietileno (PET), látex, poliestireno (PE), polietileno de baixa densidade (LDPE) e poliuretano (PU). O polipropileno (32), o polietileno de alta densidade (13) e o nylon (10) foram os polímeros mais frequentes. Os possíveis itens plásticos que podem ter originado os microplásticos incluem brinquedos, equipamentos de laboratório, baldes, embalagens de alimentos, tubulações, isolamento para cabos, têxteis, cordas e móveis que são produzidos na indústria do plástico, localizada principalmente na vertente sul da cidade da Guatemala. Além disso, as espécies de peixes do presente estudo sustentam pescarias importantes, o que levanta problemas de saúde humana, uma vez que a ingestão de peixes que consomem plásticos tem o potencial de aumentar a carga corporal de substâncias químicas perigosas, pois estas aderem superficialmente aos plásticos no ambiente e são posteriormente bioacumuladas.

The objective of this research was the identification, through Fourier transform infrared spectroscopy combined with attenuated total reflectance (FTIR-ATR), of microplastics extracted from the gastrointestinal tract of fish collected in Lake Amatitlán, to determine the main polymers and the possible origin of contamination by these materials. 68 microplastics were analyzed, corresponding to 10% of the total microplastics extracted. These originated from 36 specimens, 35 of the species Oreochromis niloticus and one of Parachromis managuensis, of which 1 to 5 microplastics per specimen were analyzed. The polymers identified were polypropylene (PP), nylon, high-density polyethylene (HDPE), polyethylene terephthalate (PET), latex, polystyrene (PE), low-density polyethylene (LDPE) and polyurethane (PU). Polypropylene (32), high-density polyethylene (13) and nylon (10) were the most frequent polymers. Possible plastic items that may have caused microplastics include toys, laboratory equipment, buckets, food packaging, pipes, insulation for cables, textiles, ropes and furniture that are produced in the plastics industry, located mainly on the south side of Guatemala City. Furthermore, the fish species in the present study support important fisheries, which raises human health concerns, since the ingestion of fish that consume plastics has the potential to increase the body load of dangerous chemicals, as they adhere superficially to the plastics in the environment and are subsequently bioaccumulated.

Metric and Spectral Insight into Bee-Pollen-to-Bee-Bread Transformation Process.

Due to numerous bioactive constituents, both bee pollen (BP) and bee bread (BB) represent valuable food supplements. The transformation of BP into BB is a complex biochemical in-hive process that enables the preservation of the pollen's nutritional value. The aim of this study was to determine the depth of the honeycomb cells in which bees store pollen and to provide a spectral insight into the chemical changes that occur during the BP-to-BB transformation process. This study was carried out on three experimental colonies of Apis mellifera carnica, from which fresh BP was collected using pollen traps, while BB samples were manually extracted from the cells two weeks after BP sampling. The samples were analyzed using infrared (FTIR-ATR) spectroscopy, and the depth of the cells was measured using a caliper. The results showed that the average depth of the cells was 11.0 mm, and that the bees stored BB up to an average of 7.85 mm, thus covering between ⅔ and ¾ (71.4%) of the cell. The FTIR-ATR analysis revealed unique spectral profiles of both BP and BB, indicating compositional changes primarily reflected in a higher water content and an altered composition of the carbohydrate fraction (and, to a lesser extent, the lipid fraction) in BB compared to BP.

The Durable Chitosan Functionalization of Cellulosic Fabrics.

In this work, the durability of chitosan functionalization of cellulosic textile substrates, cotton and cotton/polyester blended fabrics, was studied. Chitosan is a naturally occurring biopolymer that can be produced inexpensively. It should be dissolved in an acidic solution to activate its antimicrobial and other properties, i.e., good biocompatibility, bioabsorbability, wound healing, hemostatic, anti-infective, antibacterial, non-toxic, and adsorptive properties. The application of chitosan to textile products has been researched to achieve antimicrobial properties, but the durability, after several maintenance cycles, has not. Chitosan functionalization was carried out using maleic acid (MA) and 1,2,3,4-butanetetracarboxylic acid (BTCA) as crosslinking and chitosan-activating agents and sodium hypophosphite monohydrate as a catalyst. To determine durability, the fabrics were subjected to 10 maintenance cycles according to ISO 6330:2012 using Reference detergent 3 and drying according to Procedure F. The properties were monitored after the 3rd and 10th cycles. The crosslinking ability of chitosan with cellulosic fabrics was monitored by Fourier infrared spectrometry using the ATR technique (FTIR-ATR). Changes in mechanical properties, whiteness and yellowing, and antimicrobial properties were determined using standard methods. Compared to maleic acid, BTCA proved to be a better crosslinking agent for chitosan.

HPLC-DAD fingerprinting coupled with chemometric analysis can successfully differentiate Indian Berberis species and its plant parts.

Identification of the plant parts and genuine species is one of the most important steps for the quality control of raw material used in herbal medicines. In the present study, comparative analysis of TLC, HPLC and FTIR-ATR fingerprinting in conjunction with chemometric method was done to select the most appropriate fingerprinting method for quality control of Berberis aristata and its related species. To achieve this, extracts were first utilized to obtain TLC, HPLC and FT-IR fingerprinting data. The data was analyzed by chemometric methods and similarity analysis. The PCA model obtained with HPLC fingerprinting method could successfully classify the Berberis species as well plant parts viz. root, stem and leaves which was not possible with the PCA model of TLC or FT-IR fingerprints. Similarity analysis based on the mean HPLC fingerprinting chromatogram could also appropriately assess the chemical variability and identification of different Berberis species. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03644-6.

Preliminary survey on the occurrence of microplastics in bivalve mollusks marketed in Apulian fish markets.

Microplastics (MPs) are a relevant threat to food safety because they are ingested by humans through various foods. Bivalves are at high risk of microplastic contamination due to their filter-feeding mechanism and pose a risk to consumers as they are ingested whole. In this work, microplastics were detected, quantified, identified, and classified in samples of mussels (Mytilus galloprovincialis) and oysters (Crassostrea gigas) marketed in the Apulia region. The total number of plastic debris was 789 particles in the mussel samples and 270 particles in the oyster samples, with size ranging from 10 to 7350 µm. Fragments with size within the category of 5-500 µm were the predominant findings in both species, with blue as the predominant color in mussels and transparent in oysters; most of the debris was polyamide and nylon polymers in the mussels and chlorinated polypropylene in the oysters. These results show that mussel and oyster samples purchased at fish markets are contaminated with microplastics. The sources may be diverse and further studies are needed to assess the impact of the marketing stage on microplastic contamination in bivalves to better define the human risk assessment associated with microplastic exposure from bivalves consumption.