Reliability of a forensic odontology method for age-at-death estimation in adults: A Mexican case study.

This study aimed to evaluate the reliability of an age estimation method based on the pulp/tooth area ratio by assessing intra- and inter-examiner agreement across five observers at different intervals. Using the same X-ray device and technical parameters, 96 digital periapical X-ray images of upper and lower canines were obtained from 28 deceased people in Central America, whose age at death ranged from 19 to 49 years. Excellent and good agreement of results were achieved, and there were no statistically significant differences. The R2 value for upper teeth (54.0%) was higher than the R2 value for lower teeth (45.7%). The highest intraclass correlation coefficient value was 0.995 (0.993-0.997) and the lowest 0.798 (0.545-0.895). Inter-examiner agreement was high with values of 0.975 (0.965-0.983) and 0.927 (0.879-0.955). This method is adequate for assessing age in missing and unidentified people, including victims of mass disasters.

Are dental charts (odontograms) obsolete records for comparative dental analysis? / Os odontogramas são registros obsoletos para uma análise dental comparativa?

This communication aims to briefly present the importance of dental charts (odontograms) in the comparative dental analysis for human identification considering the time elapsed between its introduction and the current use in times of rapid technological changes in Dentistry. Future discussions about the rank of importance amongst the different types of dental records are necessary

Esta comunicação tem como objetivo apresentar brevemente a importância dos odontogramas na análise odontológica comparativa para a identificação humana, considerando o tempo decorrido entre sua introdução e o uso atual em tempos de rápidas mudanças tecnológicas na Odontologia. Discussões futuras sobre o grau de importância entre os diferentes tipos de registros odontológicos são necessárias

On the forensic value of tattoos for human identification ­ a literature review / Da importância forense das tatuagens para identificação humana ­ uma revisão da literatura

Disaster victim identification is structured according to international recommendations on the attempt to optimize forensic logistics. The International Criminal Police Organization (INTERPOL) establishes primary and secondary methods for human identification. This study aimed to revisit the existing literature to address the forensic importance of tattoos. The scientific literature has shown advances in the forensic analyses of tattoos specially when it comes to the application of especial imaging techniques, namely photography with infrared light to visualize latent tattoo inks and cover-up tattoos, as well as the use of biochemical processing to distinguish components of the tattoo inks. Other relevant aspect is the fields dedicated to tattoo descriptions in software used worldwide for disaster victim identification, namely PlassData. Coding systems have been proposed as well to facilitate communication in the human identification process. The future of forensic analyses of tattoos is promising considering the increase of research in recent years. Forensic practice might benefit from it with more scientific evidence to support the utilization of tattoo analyses in casework

A identificação de vítimas de desastres em massa é estruturada de acordo com recomendações internacionais na tentativa de otimizar a logística forense. A INTERPOL (International Criminal Police Organization) estabelece métodos primários e secundários para identificação humana. Este estudo teve como objetivo revisitar a literatura existente para abordar a importância forense das tatuagens. A literatura científica tem mostrado avanços nas análises forenses de tatuagens, especialmente no que diz respeito à aplicação de técnicas especiais de imaginologia, como a fotografia com luz infravermelha para visualizar tintas latentes de tatuagens e tatuagens de cobertura, bem como a utilização de processamento bioquímico para distinguir componentes das tintas de tatuagem. Outro aspecto relevante são os campos dedicados à descrição de tatuagens em softwares utilizados mundialmente para identificação de vítimas de desastres em massa, como o PlassData. Sistemas de codificação também foram propostos para facilitar a comunicação no processo de identificação humana. O futuro das análises forenses de tatuagens é promissor considerando o aumento das pesquisas nos últimos anos. A prática forense pode beneficiar-se com mais evidências científicas para apoiar a utilização de análises de tatuagens na condução de casos periciais

Black male, 19: Brazilian "criminal commando" and the breach of human rights / Homem negro, 19 anos: o "comando criminoso" brasileiro e a violação dos direitos humanos

Dental age estimation is a technical procedure performed to support Court decisions in cases of legal liability, clandestine migration, sexual abuse, and several other applications. This study reports a case of an undocumented individuals that was originally identified by the criminal legal system (without a previous civil identity). In his identity records, a name was given: "Black male, 19" ­ indicating his population affinity (African), sex (male) and age (19 years). His body was found decapitated and referred to the medicolegal institute. The dental examination highlighted the presence of a third molar in the very early stage (») of root formation. Age was estimated using five methods based on dental development (the methods of Schour and Massler [1941], Moorrees et al. [1963], Anderson et al. [1976], London Atlas [2010], and Blenkin and Taylor [2012]). All the methods indicated that the individual was a minor, within the range between 14.5 and 15.5 years. This study highlights the importance of assigning adequate personnel to technical tasks in the police/forensic routine in order to safeguard human rights

A estimativa da idade dentária é um procedimento técnico realizado para apoiar decisões judiciais em casos de responsabilidade legal, migração clandestina, abuso sexual e diversas outras aplicações. Este estudo relata o caso de um indivíduo indocumentado que foi originalmente identificado pelo sistema penal (sem identidade civil prévia). Nos seus registos de identidade foi atribuído um nome: "Homem negro, 19 anos" ­ indicando a sua afinidade populacional (africana), sexo (masculino) e idade (19 anos). Seu corpo foi encontrado decapitado e encaminhado a um Instituto Médico-legal. O exame odontológico evidenciou a presença de um terceiro molar em fase muito inicial (») de formação radicular. A idade foi estimada usando cinco métodos baseados no desenvolvimento dentário (os métodos de Schour e Massler [1941], Moorrees et al. [1963], Anderson et al. [1976], London Atlas [2010] e Blenkin e Taylor [2012]). Todos os métodos indicaram que o indivíduo era menor de idade, na faixa entre 14,5 e 15,5 anos. Este estudo destaca a importância de designar pessoal adequado para tarefas técnicas na rotina policial/forense, a fim de salvaguardar os direitos humanos

Identificação odontológica de corpo íntegro utilizando tomografia computadorizada pós-morte - relato de caso pericial / Dental identification of intact body through postmortem computed tomography - forensic case report

Há muito, os conhecimentos odontológicos têm se apresentado como uma ferramenta primordial na determinação da identidade de vítimas de morte violenta, especialmente quando estas se apresentam carbonizadas, putrefeitas, mutiladas ou esqueletizadas, mas também em casos atípicos, como em cadáveres "frescos". Nesse contexto, o presente trabalho tem o objetivo de relatar o primeiro caso de identificação odontológica utilizando-se o equipamento de tomografia computadorizada do Instituto Médico Legal (IML) de Goiânia-GO para obtenção das informações post-mortem (PM) de um cadáver íntegro, que foram confrontadas com os dados da radiografia panorâmica antemortem (AM). Relato de Caso: Um indivíduo vítima de projéteis de arma de fogo foi removido para o IML de Goiânia para os exames de praxe depois de vir a óbito em unidade hospitalar. Apesar de o corpo se apresentar "fresco", a coleta (tomada) de impressões digitais revelou um registro cuja qualidade não permitia a demarcação dos pontos necessários para um confronto papiloscópico. Os supostos familiares, então, apresentaram radiografia panorâmica AM, fato que motivou a equipe pericial a utilizar o recém instalado equipamento de tomografia computadorizada para a obtenção de imagem PM, possibilitando o devido processo de reconciliação (AM x PM), onde foram identificadas diversas similaridades de natureza anatômica e terapêutica que remeteram a uma identificação positiva da vítima. Conclusão: A adoção de abordagens tecnológicas e a alocação de recursos humanos especializados para a identificação humana devem ser prioridades nos serviços de Medicina e Odontologia Legal, visando aumentar a eficiência e precisão no processamento das demandas usuais, bem como para solucionar eventuais desafios técnicos

For a long time, dental knowledge has proven to be a fundamental tool in determining the identity of victims of violent death, especially when they are charred, putrefied, mutilated or skeletonized, but also in atypical cases, such as fresh corpses. In this context, the present work aims to report the first case of odontological identification using the computerized tomography equipment of the Forensic Medical Institute (IML) of Goiânia-GO to obtain post-mortem (PM) information from an intact corpse, which was compared with antemortem (AM) panoramic radiograph data. Case Report: An individual victim of gunshot wounds was taken to the IML of Goiânia for routine examinations after dying in a hospital unit. Although the body was "fresh," fingerprint collection revealed a record whose quality did not allow the necessary points for a papilloscopic confrontation to be marked. The supposed relatives then presented antemortem panoramic radiography, which motivated the forensic team to use the newly installed computerized tomography equipment to obtain PM images, enabling the proper reconciliation process (AM x PM), where several anatomical and therapeutic similarities were identified leading to a positive identification of the victim. Conclusion: The adoption of technological approaches and the allocation of specialized human resources for human identification should be priorities in Forensic Medicine and Odontology services, aiming to increase efficiency and accuracy in processing usual demands, as well as to solve any technical challenges that may arise

Digital matching of palatal rugae patterns for forensic identification in edentulous denture wearers.

Identifying edentulous victims in forensic contexts poses a significant challenge. It has been reported that having a denture to reproduce and compare Palatal Rugae (PR) patterns is crucial for identifying edentulous individuals, yet there are no validated protocols for conducting this procedure. In this study, a new method was developed and validated for plaster molding of the internal surface of upper dentures, along with a protocol involving focus-stacked photographs and reference scales. Thirty-eight edentulous subjects participated in the study, obtaining plaster models of the patients (PM), and their dentures (AM) were standardized. The AM/PM model was highlighted and photographed with ten shots in different z-focuses for each model, using standard lighting and aligning the position of the PR perpendicular to the photographic axis using tubular spirit levels and modeling clay. The images were processed using the stacking technique and analyzed by three observers through the proposed protocol using Adobe® Photoshop®. The results were analyzed based on the intra-observer and inter-observer agreement levels, with a 95% confidence interval. This study demonstrated high-precision intra-observer and inter-observer agreement (k = 1) in the matching of Palatal Rugae (PR) and maxillary morphology obtained from participants and their dentures. The protocol is simple, cost-effective, and precise. It enables standardization of the technique for obtaining plaster models, and the exposure of PR and photographic protocol minimizes the presence of artifacts in the images, thereby reducing the likelihood of errors and promoting the reproducibility of both the recording technique and the comparison of the PR.

Are computed tomography images of the mandible useful in age and sex determination? A forensic science meta-analysis.

OBJECTIVES: This meta-analysis addresses the use of mandibular computed tomography (CT) scans for age and/or sex determination in forensic science. METHODS: Six databases were searched until June 2023, using the keyword "mandible" combined with keywords related to "multislice computed tomography" (MCT) or "cone-beam computed tomography" (CBCT) and keywords related to "skeletal age determination" or "sex determination analysis." MAIN RESULTS: Among the 23 studies included, 11 used MCT and 12 used CBCT to perform forensic assessments. Age determination was the aim of a single study, sex and agedeterminations were the objective of five studies, and the other studies investigated the determination of sex only. Metaanalysis could be performed only for sex determination. CONCLUSIONS: Mandible measurements are useful in sex determination, as the bicondylar and bigonial breadth are larger in males than in females. For the mandible angle, the meta-analysis results confirm sex dimorphism in CBCT scans but not in MCT scans. For age estimation, further studies are needed to prove that the mandible hole is a reliable parameter for age estimation. PROSPERO registration number: CRD42021260967.

Age Estimation in Brazilian Adults Using the Pulp/Tooth Ratio of the Maxillary Canine and Mandibular Second Premolar.

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990-0.999). The determination coefficients (R2) suggested that only 30-35% of the actual age results could be explained by the pulp/tooth ratio. The smallest differences were observed with Cameriere's formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (-12.1 years) populations. (4) Conclusions: The equations employed showed little agreement between the actual age and the estimated age.

On the forensic relevance of tattoos: distinguishing black inks with energy dispersive spectroscopy and backscattered scanning electron microscopy.

PURPOSE: This study aimed to analyze black tattoo inks by means of energy dispersive spectroscopy and backscattered scanning electron microscopy. METHODS: The sample consisted of five types of commercial tattoo pigments of the black colour (Easy Glow™, Electric Ink™, Iron Works™, Master Ink™, and Viper™). An Energy Dispersive Spectroscopy (EDS) detector (Silicon Drift Detector - SDD - type) attached to a Scanning Electron Microscope (SEM) device (Tescan Vega3 LMU, Libusina, Czech Republic) was used. X-ray characteristic signs were detected for each tattoo ink in an interval between 0 and 2.5 keV. The electron acceleration potential in the microscope was 15 keV. Two regions were analyzed for each sample (n = 10). On each region, a micrography of backscattered electrons (BSE) was obtained. Means and standard deviations (SD) of the weight percentages (Wt%) were calculated. RESULTS: C and O were predominant, with a mean O/C ratio between 2.69 and 2.74 Wt%. Electric Ink and Master Ink were the most similar pigments, while Easy Glow was the most distinctive - with agglomerates of Al that had a concentration 25 × higher than other specimens. Other compounds detected in the sample were Cl and Cu. CONCLUSION: EDS and SEM were efficient to distinguish black tattoo inks. These are our preliminary outcomes on the use of EDS and SEM to analyze black tattoo inks. Thus, careful interpretation is necessary to avoid rash applications in human identification practice.

Análisis radiográfico comparativo de tratamientos endodónticos: su posible aporte en la identificación forense / Comparative radiographic analysis of endodontic treatments: its possible contribution to forensic identification

Introducción: La identificación por cotejo de regis-tros odontológicos representa una metodología científicamente consolidada. La estrategia más co-mún reside en la comparación de odontogramas impresos o digitalizados, aunque se ha cuestionado cierta subjetividad al asentar dicha información. Los recursos imagenológicos constituyen una evidencia más confiable y objetiva, reduciendo el sesgo iden-tificatorio. La obtención de radiografías post mor-tem (PM) reproduciendo en lo posible las técnicas que han generado las imágenes ante mortem (AM) recuperadas, otorga una eficaz modalidad compa-rativa, aumentando su valor probatorio. Materiales y Métodos: Se efectuó la comparación entre radio-grafías panorámicas y periapicales tomadas a 10 pacientes atendidos en un consultorio particular de la ciudad de Quilmes, Provincia de Buenos Aires, don-de se visualizaban tratamientos de endodoncia. Los registros de ambas técnicas de imágenes se realiza-ron sobre los mismos sujetos entre los años 2010 y 2022. Se cotejaron 11 radiografías periapicales y 10 panorámicas, procediéndose a la digitalización de la totalidad de la muestra. Se clasificaron las imágenes de cada persona conforme a la fecha de obtención de las mismas. A las más antiguas se las catalogó con el color verde, representando el material AM, mien-tras que las más recientes se marcaron en color rojo, constituyendo la información PM. Resultados: Teniendo en cuenta los criterios estipulados por la Junta Americana de Odontología Forense (ABFO) se identificaron positivamente 7 casos estudiados, 2 fueron catalogados como identificación posible, en tanto que 1 se clasificó como insuficiente. No se re-gistraron exclusiones. Conclusión: Los tratamientos endodónticos podrían suministrar información pon-derable en procesos de identificación humana en virtud de la escasa probabilidad de sufrir alteracio-nes morfológicas y estructurales por su estratégica localización intradentaria, otorgando posibilidades concretas de establecer la identidad categórica de sujetos desconocidos (AU)

Introduction: Identification by comparison of dental records represents a scientifically consolidated methodology. The most common strategy lies in the comparison of printed or digitised odontograms, although certain subjectivity has been questioned when recording said information. Imaging resources constitute more reliable and objective evidence, reducing identification bias. Obtaining post-mortem (PM) radiographs reproducing the techniques that have generated the recovered ante-mortem (AM) images, provides an effective comparative modality, increasing its evidentiary value. Materials and Methods: A comparison was made between panoramic and periapical radiographs taken to 10 patients treated in a private office in the city of Quilmes, Province of Buenos Aires, where endodontic treatments were visualized. The records of both imaging techniques were carried out on the same subjects between 2010 and 2022. 11 periapical and 10 panoramic radiographs were collected, and the entire sample was digitized. The images of each person were classified according to the date they were obtained. The oldest ones were cataloged with the color green, representing the AM material, while the most recent ones were marked in red, constituting the PM information. Results: Taking into account the criteria stipulated by the American Board of Forensic Odontology (ABFO), 7 cases studied were positively identified, 2 were classified as possible identification, while 1 was classified as insufficient. No exclusions were recorded. Conclusion: Endodontic treatments could provide valuable information in human identification processes due to the low probability of suffering morphological and structural alterations due to their strategic intradental location, providing concrete possibilities of establishing the categorical identity of unknown subjects (AU)

Vantagens e limitações do uso da fotografia de sorriso para a identificação humana - relato de caso / Advantages and limitations of smile photographs in human identification ­ case report

Dentre as diversas técnicas de identificação humana na Odontologia Forense, a análise pericial do sorriso vem destacando-se recentemente, pelo fato dos dentes apresentarem características individualizadoras e com relevante potencial identificador. Dentre as várias técnicas de análise pericial do sorriso, três se destacam: comparação direta, sobreposição computadorizada e delineamento incisal, sendo que cada uma possui vantagens e limitações. O objetivo deste trabalho é demonstrar, por meio de um relato de caso pericial as vantagens e limitações do uso da fotografia de sorriso para a identificação humana. Conclui-se que as fotografias de sorriso, como qualquer outro material utilizado para identificação humana, podem ser utilizadas isoladamente ou em conjunto com outros métodos de identificação, sendo que a comparação direta foi o método mais efetivo para o caso analisado

Among several human identification techniques used in Forensic Dentistry, the smile analysis has recently been increased its used due the teeth uniqueness and their identification potential in several cases. Three smile exam techniques are more frequently used: direct comparation, computerized overlap and incisal outline. This paper aims to show a case report of a human identification using smile photograph, as well presents its advantages and limitations. It was concluded that smile photographs, as any other identification method, can be used alone and in addition with other methods. The direct comparation was the most effective to the analyzed case

Uso da radiografia panorâmica como fonte de informação para a identificação humana ­ relato de caso pericial / Use of panoramic radiograph as a source for human identification ­ forensic case report

Introdução: A odontologia legal permite a identificação humana por meio da comparação de dados observados em uma documentação odontológica ante mortem (AM) com as informações coletadas post mortem (PM), sendo os exames radiográficos grandes aliados neste processo. Objetivo: Demostrar a contribuição da radiografia panorâmica como fonte de informação para a identificação humana. Relato do caso: foi encaminhado um corpo carbonizado, com parte da região bucomaxilofacial preservada e que ao exame necroscópico era possível identificar a presença de restaurações e ausências dentais. A apresentação de radiografia panorâmica anterior à morte e a realização de exame radiográfico panorâmico no corpo carbonizado possibilitou a comparação de pontos coincidentes e divergências explicáveis, permitindo a identificação positiva do caso. Conclusão: Ao final da perícia foi determinada a identidade da vítima e foi comprovada a importância da radiografia panorâmica para a identificação humana com base em caracteres identificadores anatômicos e terapêuticos presentes no complexo bucomaxilofacial

Introduction: Forensic dentistry allows human identification through the comparison of data observed in ante-mortem (AM) dental documentation with information collected post-mortem (PM), with radiographic examinations being great allies in this process. Objective: To demonstrate the contribution of panoramic radiography as a source of information for human identification. Case report: a charred body was sent, with part of the oral and maxillofacial region preserved and upon necroscopic examination it was possible to identify the presence of restorations and missing teeth. The presentation of a panoramic radiograph prior to death and the performance of a panoramic radiographic examination of the charred body made it possible to compare coincident points and explainable divergences, allowing positive identification of the case. Conclusion: At the end of the forensic examination of the case, the identity of the victim was determined and the importance of panoramic radiography for human identification based on anatomical and therapeutic identifying characters present in the oral and maxillofacial complex was proven

Assessment of carbon, oxygen, strontium, and lead isotopic variation in modern Colombian teeth: An application to human identification.

Colombia faces the complex humanitarian challenges of locating approximately 100,000 missing persons and identifying thousands who are deceased. Identification is a difficult task in many cases, because the skeletonized bodies are deteriorated, missing person data are unavailable for comparison, and the provenance of the remains is often totally unknown. Isotopic analysis of human tissues (e.g., bone, hair, nails, and teeth) aid in the identification process of unknown individuals because they can provide valuable information on possible geographic origin. This project evaluated the isotopic variability of carbon (C), oxygen (O), strontium (Sr), and lead (Pb) in modern Colombian teeth according to city, department (a political designation similar to "state" in the US or Mexico), and one of four geographically determined regions of origin; and assessed its utility for human identification in Colombia. Isotopic data (O-C-Sr-Pb) were analyzed from modern Colombians originating from the cities of Bogotá, Cali, and Neiva (n = 95); and these data were compiled with published Colombian data of individuals mainly from the city of Medellín (n = 61). Results indicate a wide range and overlap of O-C-Sr-Pb isotopic distribution according to the defined categories. However, differences between coastal and lowland individuals are observed when using δ18 O values, and differences between mountainous regions are observed when using 87 Sr/86 Sr values. In addition, this study suggests that the usefulness of isotopic analysis for unidentified individuals in Colombia would be with assigning them geographically using the designations of North, Central Andes, Eastern Andes, or Southwest Andes versus making classifications at a city or department level.

A posteriori parameters from paternity tests of a Mexican laboratory with the powerplex fusion system.

Population studies regarding Human identification (HID) systems report a priori forensic parameters, but rarely they describe a posteriori parameters from concluded paternity tests. We analyzed data from the PowerPlex® Fusion System in 1503 paternity tests from a Mexican laboratory for five years (2016-2020). The motherless duo paternity tests (89.8%) were more frequent than the standard trio tests (10.2%). A notable increase in motherless tests was noted regarding our previous report (89.8% vs 77.3%), probably explained by the COVID-19 pandemic. The estimated exclusion frequency in Mexico ranged from 30.1 (trio) to 32.1% (duo). For paternity exclusions, we report the number of mismatches and the frequency at which each STR was involved. The PowerPlex® Fusion system showed more than five mismatches in 100% of the standard trio tests excluding paternity, and the majority of motherless-duo tests (98.1%). In positive paternity tests, PowerPlex® Fusion offered a higher combined paternity index (PI) (average 1.18 E + 10) regarding HID systems with 15 and 20 STRs, even without the inclusion of the Y-linked locus DYS391 to the kinship interpretation. Individual and global STR mutation rates were estimated from 17 paternal mutations (µ = 0.0017), the majority involving a single-step mutation (94.11%). Five independent null alleles were detected, most of them involving the Penta E locus (80%), which suggests caution to the users working with DNA databases or kinship analysis, to avoid false exclusions with Penta E. In brief, our results provide a better overview of a posteriori informativeness offered by the PowerPlex® Fusion system for paternity testing in Mexico.

Sphenoid sinuses' volume and area analysis of Brazilian individuals' CBCTs, related to sex, age, skin color, and nutritional status using DDS-Pro™ software.

The purpose of this study was to analyze the volume and area of sphenoid sinuses of Brazilian individuals' cone-beam computed tomography (CBCT) images using the beta version of the DDS-Pro™ 2.14.2_2022 software (DPP Systems, Czestochowa, Poland), to assess a potential correlation to sex, age, skin color, and nutritional status, and to evaluate differences between the right and left sides. Three-dimensional volume and area measurements were made with the software using CBCT images of 113 living Brazilian individuals of both sexes (67 females and 46 males). TEM, rTEM, and R were used to assess the reproducibility of inter- and intra-examiner measurements. The measurement means were estimated with 95% confidence intervals according to sex and age group. There were no significant differences between the left and right sides for both volume and area and between the sexes and black and white individuals. Volume and area were significantly higher in 18 years or older (p < 0.05) and in individuals with normal body mass index (BMI) (p < 0.05). The obtained results do not allow indicating the use of sphenoid sinuses volume and area measurements to estimate sexual dimorphism, and the same occurred for skin color. However, such measures can help to estimate age. Further studies are suggested with a larger sample, especially for the nutritional status variable.

Escaneamento intraoral como ferramenta de identificação humana através das rugosidades palatinas / Intraoral scanning as a tool for human identification through palatal roughness

A rugoscopia palatina analisa os padrões das rugas e suas características para cada indivíduo, podendo auxiliar a odontologia forense na identificação humana. Apesar de ser um método descrito na literatura a certo tempo, ainda existem poucos estudos utilizando imagens digitais. O objetivo deste estudo foi verificar a viabilidade da rugoscopia palatina através do método digital. Foram recrutados 30 alunos matriculados no curso de odontologia da Universidade São Francisco, mediante autorização do comitê de ética em pesquisa. A pesquisadora 1 realizou o escaneamento intraoral da arcada superior dos voluntários e o processamento e identificação dos modelos, dividindo-os em grupo A, composto pelo arco superior completo identificado de 1 a 30 e B pelo recorte da região de interesse, anterior e média do palato, enumerado de 1' a 30', os números foram dispostos de forma aleatória e registrados em uma tabela. Por se tratar de um estudo cego, a pesquisadora 2 só participou da segunda fase da pesquisa, exportando os modelos digitais em um software para analisar e classificar as rugas palatinas. A pesquisadora 2 realizou o levantamento total de rugas por indivíduo e correlacionou os modelos do grupo A com os do grupo B, obtendo um resultado de 100% de acertos. A análise do padrão de rugas é confiável, precisa e vantajosa, porém padronizar a classificação facilitaria sua reprodutibilidade. Tendo em vista o aumento do uso de tecnologias na odontologia, sugere-se que o método digital seja a linha de primeira escolha para o processo de identificação

Palatal rugoscopy analyzes the wrinkle patterns and their characteristics for each individual, and can assist forensic odontology in human identification. Despite being a method described in the literature for some time, there are still few studies using digital images. The aim of this study was to verify the feasibility of palatal rugoscopy using the digital method. Thirty students enrolled in the dentistry course at University of São Francisco were recruited, with the consent of the ethics in research committee. Researcher 1 performed the intraoral scanning of the upper arch of the volunteers and the processing and identification of the models, dividing them into group A, composed of the complete upper arch identified from 1 to 30, and B for the region of interest, anterior and midpalate, numbered from 1' to 30', the numbers were randomly arranged and recorded in a table. Since this was a blind study, researcher 2 only participated in the second phase of the research, exporting the digital models in a software to analyze and classify the palatal wrinkles. Researcher 2 performed the total survey of wrinkles per individual and correlated the models from group A with those from group B, obtaining a result of 100% correct. The wrinkle pattern analysis is reliable, precise, and advantageous, but standardizing the classification would facilitate its reproducibility. Given the increased use of technology in dentistry, it is suggested that the digital method be the first choice line for the identification process

Análisis forense de dientes, materiales de obturación y restauraciones protésicas en restos humanos expuestos a elevadas temperaturas. Revisión de la literatura / Forensic analysis of teeth, filling materials and prosthetic restorations in human remains exposed to high temperatures. Literature review

Resumen El proceso para establecer una identificación odontológica inequívoca se sustenta en la recuperación de la mayor cantidad posible de información post mortem, y su posterior cotejo con aquellos registros ante mortem de la víctima. Los dientes son tejidos del cuerpo humano con una elevada resistencia en su estructura, lo que les permite tolerar el embate de los efectos ambientales como el fuego, la desecación, la descomposición o la inmersión prolongada. En la mayoría de los desastres naturales, y también en los provocados por el hombre, los registros odontológicos pueden contribuir para identificar cuerpos que sería irreconocibles aplicando metodologías tradicionales. En cadáveres quemados o carbonizados, resulta imperativo conservar la evidencia odontológica recuperada, para evitar que su manipulación pueda desvirtuarla e incluso destruirla; por eso se suele fijar y estabilizar antes de ser transportada. Los recursos imagenológicos constituyen una sólida estrategia de perennización de evidencia, los cuales pueden ser complementados por fotografías y toma de impresiones. El presente artículo revisa varios estudios sobre restos dentales, materiales de obturación y aparatos protésicos quemados o carbonizados, haciendo énfasis sobre su importancia en el proceso de identificación humana.

Abstract The process to establish an unequivocal dental identification is based on the recovery of the greatest possible amount of post mortem information, and its subsequent comparison with the ante mortem records of the victim. Teeth are tissues of the human body with high resistance in their structure, which allows them to tolerate the onslaught of environmental effects such as fire, desiccation, decomposition, or prolonged immersion. In most natural disasters, an also in those caused by men, dental records can help identify a body that would be unrecognizable using traditional methodologies. In burned or charred corpses, it is imperative to preserve the recovered dental evidence, to avoid its manipulation from distorting and even destroying it; this is why it is usually fixed and stabilized before being transported. Imaging resources constitute a solid strategy for the perpetuation of evidence, which can also be complemented by photographs and impression taking. This article reviews several studies on dental remains, materials and burned or charred prosthetic devices, emphasizing their importance in the human identification process.

Reproducibility of human landmark identification in morphological mandible prototypes: major parameters for a 3D CBCT approach.

The establishment of anthropometric measurements is of fundamental importance for the correct identification of human bodies. The objective of this study was to evaluate the accuracy and reliability of two-dimensional craniometric landmarks obtained from three-dimensional cone beam computed tomography reconstructions for forensic identification of humans. Computed tomography images with voxel sizes of 0.25, 0.3, and 0.4 mm were obtained using i-CAT® three-dimensional equipment. Ten landmarks were randomly selected, and 10 measurements were demarcated in the three-dimensional reconstruction to evaluate the mandibular condyle, ramus, and body. This study demonstrated that protocols with voxels of 0.3 mm should be preferentially indicated for the evaluation of linear and angular measurements. Implementing our methodology using prototypes for clinical and forensic simulations allows comparisons with human databases in identification issues.

Resistencia estructural de prótesis dentales acrílicas y de cromo cobalto en cadáveres quemados o carbonizados: a propósito de dos casos / Structural resistance of acrylic and cobalt-chromium dental prostheses in burned or charred corpses: a propos of two cases

La identificación humana genera continuos desafíos técnicos y científicos para los equipos de expertos forenses en sus múltiples contextos de intervención. Uno de los más complejos, está representado por el hallazgo de cadáveres quemados o carbonizados, donde las huellas dactilares resultan inviables. En tales situaciones, los tejidos de la cavidad oral han demostrado elevada tolerancia a la injuria térmica, aportando información decisiva, muchas veces com-plementada por estructuras protésicas recupera-das del occiso. El presente artículo reporta dos ca-sos donde las prótesis dentales acrílicas y de cromo cobalto exhibieron notable indemnidad pese a la gran pérdida orgánica sufrida por los cuerpos de las víc-timas ante la acción vulnerante del fuego, otorgando valor probatorio para contribuir en el establecimien-to de su identidad (AU)

Human identification generates continuous technical and scientific challenges for teams of forensic experts in their multiple contexts of intervention. One of the most complex is represented by the discovery of burned or charred corpses, where fingerprints are unviable. In such situations, the tissues of the oral cavity have shown high tolerance to thermal injury, providing decisive information, often complemented by prosthetic structures recovered from the deceased. This article reports two cases where the acrylic and cobalt chrome dental prostheses presented notable indemnity despite the great organic loss suffered by the bodies of the victims before the damaging action of fire, granting probative value to contribute to the establishment of their identity (AU)

Analysis of the anthropometric measurements of the smile using 3D stereophotogrammetry / Análise das medidas antropométricas do sorriso utilizando a estereofotogrametria 3D

3D stereophotogrammetry makes the analysis of facial soft tissues possible, and has the potential to contribute to human identification processes. Nowadays, the images available through social networks are composed of a significant amount of smile photos, making techniques such as 3D stereophotogrammetry relevant. The objective of the present study was to quantitatively analyze the anthropometric measurements of the smile through 3D stereophotogrammetry, including area, angular, and linear measurements. Anatomical landmarks were used to make possible the area, angular, and linear measurements. The sample consisted of 25 volunteers, 13 female and 12 male, both in the 19-25 age group, resulting in a mean age of 22.31.9 and 23.31.5, respectively. The anatomical landmarks were marked on the face of the volunteers using a black eyeliner, and the photographs were taken using the 3D stereophotogrammetry technique (Vectra H1, Canfield, NY, USA), being 3 photographs with a spontaneous smile and 3 at rest, right lateral, left lateral and frontal of each. Among the results of the comparison between genders and the photo/smile relation of the statistical analysis, variables such as the mentolabial angle and the vermilion height of the upper lip showed significant p-values of 0.046 and 0.014, respectively. It can be concluded that anthropometric measurements of three-dimensional smile images can be performed with the use of 3D stereophotogrammetry, with the purpose of contributing to facial identification methods

A estereofotogrametria 3D possibilita a análise dos tecidos moles faciais e tem o potencial de contribuir para os processos de identificação humana. Atualmente, as imagens disponíveis nas redes sociais são compostas por uma quantidade significativa de fotos de sorrisos, tornando relevante técnicas como a estereofotogrametria 3D. O objetivo do presente estudo foi analisar quantitativamente as medidas antropométricas do sorriso por meio da estereofotogrametria 3D, incluindo medidas de área, angulares e lineares. Referenciais anatômicos foram utilizados para possibilitar as medidas de área, angulares e lineares. A amostra foi composta por 25 voluntários, sendo 13 do sexo feminino e 12 do sexo masculino, ambos na faixa etária de 19 a 25 anos, resultando em média de idade de 22,3±1,9 e 23,3±1,5, respectivamente. Os referenciais anatômicos foram marcados na face dos voluntários com delineador preto e as fotografias foram realizadas pela técnica de estereofotogrametria 3D (Vectra H1, Canfield, NY, EUA), sendo 3 fotografias com sorriso espontâneo e 3 em repouso, direita lateral, esquerda lateral e frontal de cada um. Dentre os resultados da comparação entre gêneros e relação foto/sorriso da análise estatística, variáveis como o ângulo mentolabial e a altura do vermelhão do lábio superior apresentaram valores de p significativos de 0,046 e 0,014, respectivamente. Pode-se concluir que medidas antropométricas de imagens tridimensionais do sorriso podem ser realizadas com o uso da estereofotogrametria 3D, com a finalidade de contribuir com os métodos de identificação facial