Experimental Protocols Used to Mimic Gastrointestinal Protein Digestion: A Systematic Review.

Bioactive peptides derived from native proteins modulate physiological processes in the metabolic pathways. Given that multiple protocols in the literature mimic the digestion of dietary components, gathering studies that use such models directed at protein digestion processes is critical. This systematic review aimed to gather evidence that adopted adequate experimental models to simulate human protein digestion. The databases searched were PubMed, Web of Science, ScienceDirect, Embase, Virtual Health Library, and Scopus. A total of 1985 articles were found, resulting in 20 eligible in vitro studies. The Office of Health Assessment and Translation was used to evaluate methodological quality. Seven studies used plant-based protein sources, twelve used animal protein sources, and one used both. The duration of the oral phase varied, although 60% of the studies employed a protein digestion period of 120 min. Amylase, pepsin, and pancreatin enzymes were utilized in 40% of the studies, with pH levels of 7, 3, and 7, respectively, during the oral, gastric, and intestinal phases. The INFOGEST harmonized static model was adopted by 65% of the studies; INFOGEST is the most effective model for simulating gastrointestinal protein processes in humans and can be used to answer several research questions because it describes experimental conditions close to the human physiological situation.

The role of light emitting diode in wound healing: A systematic review of experimental studies.

Wounds represent a growing global issue demanding increased attention. To expedite wound healing, technologies are under development, and light emitting diode (LED) devices of varying wavelengths are being explored for their stimulating influence on the healing process. This article presents a systematic literature review aiming to compile, organize, and analyze the impacts of LED devices on wound healing. This review is registered on the PROSPERO platform [CRD42023403870]. Two blinded authors conducted searches in the Pubmed, Web of Science, Scopus, Embase, and ScienceDirect databases. In vitro and in vivo experimental studies assessing LED utilization in the wound healing process were included. The search yielded 1010 studies, of which 27 were included in the review. It was identified that LED stimulates different healing pathways, promoting enhanced cell proliferation and migration, angiogenesis stimulation, increased collagen deposition, and modulation of the inflammatory response. Thus, it can be concluded that the LED stimulates cellular and molecular processes contingent on the utilized parameters. The effects depend on the standards used. Cell migration and proliferation were better influenced by green and red LED. The extracellular matrix components and angiogenesis were regulated by all wavelengths and the modulation of inflammation was mediated by green, red, and infrared LEDs.

Açaí juice stains a glazed resin-modified glass-ionomer cement.

Coloured compounds (anthocyanins) in açaí can stain resin-modified glass-ionomer cement (RMGIC) due to its low staining resistance. AIM: The aim of this study was to assess whether açaí compromises the surface colour and roughness of RMGIC in vitro. MATERIALS AND METHOD: Disc-shaped specimens (2 mm thick, 8 mm in diameter) of Vitremer™ (3M ESPE, St Paul, MN, USA) were prepared according to the manufacturer 's instructions. The mixture was inserted into a silicone mouldplaced between two mylar strips, and light cured. Specimens were randomly divided into three groups (n=25) according to the solutions to be used for chemical degradation: artificial saliva (control), açaí sorbet and açaí juice. A spectrophotometer CM-2600d/2500d (Konica Minolta, Tokyo, Japan) was used to analyse the colour (CIELa*b* scale). Surface roughness (Ra, mm) was measuredusing theprofilometer Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan). The specimens were subjected to three daily soaks (6 ml, 15 minutes) for 14 days at 37°C. They were washed in distilled water and placed in fresh saliva (30 minutes in the interval). After the third soak in a day, they were stored in fresh saliva overnight. Outcomes were analysed at baseline (L*, a*, b*, Ra) and after degradation (L'*, a'*, b'*, Ra'). RESULTS: The pH values of saliva, sorbet, and juice were 7.0, 3.8, and 4.9, respectively. ΔE* values were 6.6 for saliva, 6.9 for sorbet and 7.8 for juice. There was a significant ΔE* difference between saliva (p=0.005) and juice (p=0.002), and between juice and sorbet (p=0.019), but none between saliva and sorbet (p=0.401). There was no significant Δb* difference between the solutions. No difference between juice and sorbet was observed for Δa*, but they were significantly different from saliva (p<0.001). Brightness (L*) changed significantly. Juice showed the highest ΔE* (7.8) and ΔL* (7.7). No significant change was observed for roughness and there was no difference between the solutions for ARa. CONCLUSIONS: Açaí and saliva led to unacceptable staining, but no significant roughness changes in the resin-modified glass-ionomer cement.

As antocianinas presentes no açaí podem manchar o cimento de ionomero de vidro modificado por resina (CIVMR) devido a baixa resistencia ao manchamento do material. OBJETIVO: O objetivo desse estudo foi avaliar se o açaí compromete a cor e a rugosidade de superficie de um CIVMR in vitro. MATERIAIS E MÉTODOS: Amostras (2 mm de espessura, 8 mm de diámetro) de Vitremer™ (3M ESPE, St Paul, MN, USA) foram preparadas de acordo com as instrugoes do fabricante. O materialfoi espatulado, inserido em um molde de silicone colocado entre duas tiras de poliestireno e fotopolimerizado. Após, as amostras foram randomizadas e alocadas em tres grupos (n=25) de acordo com as solugoes usadas para a degradagao química: saliva artificial (controle) e sorbet de açaí e suco de açaí. Utilizou-se o espectrofotometro CM-2600d/2500d (Konica Minolta, Tokyo, Japan) para a análise da cor (escala CIELa*b*) e o rugosímetro Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan) para a rugosidade de superficie (Ra, mm). As amostras foram submetidas a tres imersoes diárias (6 ml, 15 minutos) em cada solugao por 14 dias a 37°C, tendo sido lavadas em água destilada e mantidas em saliva fresca (30 minutos) nos intervalos. Após a terceira imersao no dia, as amostras foram mantidas em saliva renovada até o dia seguinte. As variáveis foram analisadas antes (L*, a*, b*, Ra) e depois da degradagao química (L'*, a'*, b'*, Ra'). RESULTADOS: Os valores de pH da saliva, sorbet e suco foram, respectivamente 7,0, 3,8 e 4,9. Houve diferenga significante para ΔE* entre saliva (p=0.005) e suco (p=0.002) e entre suco e sorbet (p=0.019), mas nao entre saliva e sorbet (p=0.401). Nao foi observada diferenga significante para Δb* entre as solugoes. Nao houve diferenga significante para Δa* entre suco e sorbet, mas eles foram significativamente diferentes da saliva (p<0.001). A luminosidade (L*) mostrou alteragao significante. O suco mostrou os maiores valores de ΔE* (7,8) e ΔL* (7,7)". Nao houve mudanga significante para a rugosidade e nao foi observada diferenga significante entre as solugoes para ARa (p>0.05). CONCLUSÃO: O açaí e a saliva causaram manchamento inaceitável do glaze do CIVMR e insignificante alteragao da rugosidade.

A feasible in vitro method to evaluate bacterial infiltration in three implant-abutment connection systems / Método in vitro factible para evaluar la infiltración bacteriana en tres sistemas de conexión implante-pilar

Introduction: Microorganism infiltration through the im-plant-abutment interface causes oral health problems such as periimplantitis, leading to implant loss. Materials and Methods: A feasible new method to quantify the Streptococcus mutans (S. mutans) infiltration through the implant-abutment interface gap is introduced in the present work. Internal hexagon (IH; n = 10), external hexagon (EH; n = 10), Morse taper (MT; n = 10), and a control for each group (n = 1) were tested. Bacteria suspension was prepared at 1.5x108 CFU/mL (CFU: colony forming units), and the implants were individually submerged up to the connection level, allowing the bacteria to contact it. The abutment was removed, and bacteria count was performed. Results: The implant sets were tested under normal bacterial growth and early and late biofilm growth conditions. Colony-forming units per mL were obtained, and the results were compared among groups. Differences in bacterial count between the MT and EH (p<0.001) and the MT and IH (p<0.001) groups were significantly higher in the MT-type implant. There was a significant increment of bacterial infiltration in the MTs submitted to late biofilm growth conditions. EH and IH connections are more effective in preventing bacterial infiltration independent of the growth condition. Conclusions: The proposed methodology is feasible to evaluate the infiltration of microorganisms through the implant-abutment interface.

Introducción: La infiltración de microorganismos a través de la interfaz implante-pilar provoca problemas de salud bucal como la periimplantitis, que conduce a la pérdida del implante. Materiales y Métodos: En el presente trabajo se presenta un nuevo método factible para cuantificar la infiltración de Streptococcus mutans (S. mutans) a través de la brecha de la interfaz implante-pilar. Se probaron el hexágono interno (IH; n = 10), el hexágono externo (EH; n = 10), el cono Morse (MT; n = 10) y un control para cada grupo (n = 1). Se preparó una suspensión de bacterias a 1,5x108 UFC/mL y los implantes se sumergieron individualmente hasta el nivel de conexión, permitiendo que las bacterias entraran en contacto con él. Resultados: Se retiró el pilar y se realizó recuento de bacterias. Los conjuntos de implantes se probaron en condiciones de crecimiento bacteriano normal y de crecimiento temprano y tardío de biopelículas. Se obtuvieron unidades formadoras de colonias por ml y los resultados se compararon entre grupos. Las diferencias en el recuento bacteriano entre los grupos MT y EH (p<0,001) y MT e IH (p<0,001) fueron significativamente mayores en el implante tipo MT. Hubo un incremento significativo de la infiltración bacteriana en los MT sometidos a condiciones tardías de crecimiento de biopelículas. Las conexiones EH e IH son más efectivas para prevenir la infiltración bacteriana independientemente de las condiciones de crecimiento. Conclusión: La metodología propuesta es factible para evaluar la infiltración de microorganismos a través de la interfaz implante-pilar.

Influence of different opacities and layering technique of nanotechnology composite resins regarding the wavelength and fluorescence intensity: in vitro study / Influencia de diferentes opacidades y la técnica de estratificación de resinas compuestas de nanotecnología en la longitud de onda e intensidad de fluorescencia: estudio in vitro

Objective: To evaluate the influence of opacity and the layering technique on the fluorescence of different composite resins. Materials and Methods: Two opacities (enamel and dentin) and the layering technique (enamel + dentin) of the composite resins: Filtek® Z350 and Palfique LX5 were evaluated in vitro. Composite resin discs were fabricated using a preformed matrix of 10 mm diameter and 0.5 mm thick for the single opacity groups and 10 mm thick for the layering technique groups, using 2 layers of 0.5 mm thickness of each opacity (n = 5). Specimens were analyzed using the Raman spectroscopy method. Data were analyzed using the Kruskall-wallis and Mann-Whitney U tests. Results: When evaluating the intensity of fluorescence, no statistically significant difference was found when comparing the layering technique and enamel opacity (p2> 0.05) and an increase in the dentin opacity value for both brands of composite resin. Regarding wavelength, no statistically significant difference was found when comparing the layering technique with enamel opacity and dentin opacity for both Filtek® Z350 and Palfique LX5® composite resins (p2 > 0.05). Conclusions: The fluorescence intensity of the layering technique is similar to enamel opacity for both composite resins. Likewise, the wavelength of the layering technique is similar to the enamel opacity and dentin opacity for both brands.

Objetive: Evaluar la influencia de la opacidad y de la técnica de estratificación en la fluorescencia de diferentes resinas compuestas. Materiales y Métodos: Se evaluó in vitro 2 opacidades (Esmalte y Dentina) y la técnica de estratificación (Esmalte + Dentina) de las resinas compuestas: Filtek® Z350 y Palfique LX5. Se fabricaron discos de resina compuesta, utilizando una matriz preformada de 10 mm de diámetro y 0,5 mm de grosor para los grupos de opacidad única y 10 mm de grosor para los grupos de técnica estratificada, utilizando 2 capas de 0,5 mm de cada opacidad (n = 5). Los especímenes se analizaron mediante el método de Espectroscopía Raman. Los datos se analizaron utilizando la prueba de Kruskall-wallis y Prueba U de Mann Whitney. Resultado: Al evaluar la intensidad de fluorescencia no se encontró diferencia estadísticamente significativa entre los pares: Técnica estratificada versus Opacidad Esmalte para ambas marcas de resina compuesta Filtek® Z350 y para Palfique LX5® (p2 > 0,05). Para longitud de onda no se encontró diferencia estadísticamente significativa entre los pares: Técnica estratificada versus Opacidad Esmalte y Técnica estratificada VS Opacidad Dentina para ambas resinas compuesta Filtek® Z350 y Palfique LX5® (p2> 0,05). Conclusión: La intensidad de fluorescencia de la técnica estratificada es similar a la opacidad Esmalte para ambas resinas compuestas. De igual manera la longitud de onda de la técnica estratificada es similar a la opacidad Esmalte y opacidad Dentina para ambas marcas.

Efficiency of cavitary varnishes containing experimental bioglass particles in the occlusion of dentinal tubules.

This research aims to evaluate the efficiency of cavitary varnishes containing experimental bioglasses in the occlusion of dentinal tubules. One hundred and sixty-eight cervical buccal dentin samples were obtained from bovine teeth. Samples were randomized into the following groups: I. Distilled Water (DW); II. Cavity Varnish (CV); III. Colgate® Sensitive Pro-Relief™ (CS); IV. 45S5 Bioglass (45S5); V. KSr Bioglass strontium potassium (KSr); VI. P Bioglass phosphorus (P); and VII. PSi Bioglass phosphorus silica (PSi). The treatments were applied to the surfaces of the samples, which were then subjected to simulated brushing. The samples were analyzed for a) characterization of bioactive glasses; b) surface roughness; c) descriptive analysis of the dentin surface; d) total versus occluded number of dentinal tubules; e) diameter of the dentinal tubules; f) chemical composition of the dentin surfaces, and g) dentin permeability. All groups treated with biomaterials without the brushing challenge showed an increase in roughness and (total or partial) occlusion of the dentinal tubules. The PSi group had the best values for occlusion, while the KSr group had the highest calcium and phosphorus concentrations. After the brushing challenge the roughness was controlled by the presence of biomaterials; 45S5, KSr, and PSi showed occlusion of the dentin tubules. All bioactive glasses showed reduced tooth permeability compared to distilled water. The PSi group had the smallest tubule diameter and highest phosphorus concentration. KSr and PSi bioglasses are promising materials for dentin occlusion and remineralization and are promising new biomaterials for the treatment of dentin hypersensitivity.

Toxicity Assessment of New Ag-ZnO/AgO Nanocomposites: An In Vitro and In Vivo Approach.

Zinc oxide nanoparticles (ZnO NPs) are metal oxide nanomaterials, which are important for several applications: antibacterial, anthelmintic, antiprotozoal and antitumoral, among others. These applications are mainly related to the ability to spontaneously produce and induce the production of reactive oxygen species that are important components for the destruction of pathogens and tumor cells. While trying to potentiate ZnO NPs, studies have associated these NPs with silver oxide (AgO) or silver (Ag) NPs. It has already been reported that this combination (Ag-ZnO/AgO NPs) is able to enhance the microbicidal potential. Although possessing much potential for several purposes, it is important to evaluate whether this association also poses the risk of toxicity to cells and experimental models. Therefore, this work aimed to evaluate the toxicity of various Ag-ZnO/AgO NP nanocomposites, in vitro and in vivo. Accordingly, ZnO nanocrystals and nanocomposites with various concentrations of AgO (ZnO:5Ag, ZnO:9Ag or ZnO:11Ag) were used in different cytotoxicity models: Galleria mellonella (G. mellonella), cell lines (VERO and RAW 264.7) and C57BL/6 mice. In the G. mellonella model, four concentrations were used in a single dose, with subsequent evaluation of mortality. In the case of cells, serial concentrations starting at 125 µg/mL were used, with subsequent cytotoxicity assessment. Based on the safe doses obtained in G. mellonella and cell models, the best doses were used in mice, with subsequent evaluations of weight, biochemistry as also renal and liver histopathology. It was observed that the toxicity, although low, of the nanocomposites was dependent upon the concentration of AgO used in association with ZnO NPs, both in vitro and in vivo.

Evaluation of cellular viability in chitosan/L-arginine hydrogels.

BACKGROUND: There is a lack of studies evaluating the toxicity of nitric oxide (NO) precursors in chitosan/L-arginine hydrogels and their topical administration. However, clarifying the characteristics of these elements is essential for their possible use in non-surgical techniques of tooth movement acceleration. Such characteristics include interaction with different cell types, metabolism and drug safety. OBJECTIVES: This in vitro study aimed to assess the cytotoxicity of chitosan hydrogels on human HeLa cells using different concentrations of L-arginine. MATERIAL AND METHODS: The hydrogels were synthesized in a materials engineering laboratory, with a controlled environment, using 4 different L-arginine concentrations of 0%, 10%, 15%, and 20%. Once the hydrogels were prepared, their physical and chemical properties were characterized, and viability analysis was performed using 2 different methods, including a 48-h assay with Artemia salina nauplii and a 24-h cell culture with human HeLa cells followed by a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) proliferation assay. Data analysis was performed using a Mann-Whitney U test to evaluate positive and negative controls in the cell culture, with a significance level of 0.01. A Wilcoxon paired test contrasted the 24-h compared to 48-h Artemia salina assays, with a Kruskal-Wallis and post hoc Dunn test used to compare groups using a significance level of 0.05. RESULTS: In the more viscous hydrogels, Artemia salina nauplii decreased drastically in 24 h, while the 15% and 20% hydrogels had no statistical differences from the negative control. The 10% and 20% hydrogels were statistically different from the negative control when comparing cell culture data. CONCLUSIONS: Our findings suggest that chitosan/L-arginine hydrogels could be used in humans without toxic effects. However, more trials and tests are needed to evaluate tooth movement rate during orthodontic treatment.

Metallic nanoparticles and treatment of cutaneous leishmaniasis: A systematic review.

BACKGROUND: Cutaneous leishmaniasis (LC) is an infectious vector-borne disease caused by parasites belonging to the genus Leishmania. Metallic nanoparticles (MNPs) have been investigated as alternatives for the treatment of LC owing to their small size and high surface area. Here, we aimed to evaluate the effect of MNPs in the treatment of LC through experimental, in vitro and in vivo investigations. METHODS: The databases used were MEDLINE/ PubMed, Scopus, Web of Science, Embase, and Science Direct. Manual searches of the reference lists of the included studies and grey literature were also performed. English language and experimental in vitro and in vivo studies using different Leishmania species, both related to MNP treatment, were included. This study was registered in PROSPERO (CRD42021248245). RESULTS: A total of 93 articles were included. Silver nanoparticles are the most studied MNPs, and L. tropica is the most studied species. Among the mechanisms of action of MNPs in vitro, we highlight the production of reactive oxygen species, direct contact of MNPs with the biomolecules of the parasite, and release of metal ions. CONCLUSION: MNPs may be considered a promising alternative for the treatment of LC, but further studies are needed to define their efficacy and safety.

Açaí juice stains a glazed resin-modified glass-ionomer cement / Suco de apaí provoca o manchamento do glaze do cimento de ionomero de vidro modificado por resina

ABSTRACT Coloured compounds (anthocyanins) in açaí can stain resin-modified glass-ionomer cement (RMGIC) due to its low staining resistance. Aim The aim of this study was to assess whether açaí compromises the surface colour and roughness of RMGIC in vitro. Materials and Method Disc-shaped specimens (2 mm thick, 8 mm in diameter) of Vitremer™ (3M ESPE, St Paul, MN, USA) were prepared according to the manufacturer 's instructions. The mixture was inserted into a silicone mouldplaced between two mylar strips, and light cured. Specimens were randomly divided into three groups (n=25) according to the solutions to be used for chemical degradation: artificial saliva (control), açaí sorbet and açaí juice. A spectrophotometer CM-2600d/2500d (Konica Minolta, Tokyo, Japan) was used to analyse the colour (CIELa*b* scale). Surface roughness (Ra, mm) was measuredusing theprofilometer Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan). The specimens were subjected to three daily soaks (6 ml, 15 minutes) for 14 days at 37°C. They were washed in distilled water and placed in fresh saliva (30 minutes in the interval). After the third soak in a day, they were stored in fresh saliva overnight. Outcomes were analysed at baseline (L*, a*, b*, Ra) and after degradation (L'*, a'*, b'*, Ra'). Results The pH values of saliva, sorbet, and juice were 7.0, 3.8, and 4.9, respectively. ΔE* values were 6.6 for saliva, 6.9 for sorbet and 7.8 for juice. There was a significant ΔE* difference between saliva (p=0.005) and juice (p=0.002), and between juice and sorbet (p=0.019), but none between saliva and sorbet (p=0.401). There was no significant Δb* difference between the solutions. No difference between juice and sorbet was observed for Δa*, but they were significantly different from saliva (p<0.001). Brightness (L*) changed significantly. Juice showed the highest ΔE* (7.8) and ΔL* (7.7). No significant change was observed for roughness and there was no difference between the solutions for ARa. Conclusions Açaí and saliva led to unacceptable staining, but no significant roughness changes in the resin-modified glass-ionomer cement.

RESUMO As antocianinas presentes no açaí podem manchar o cimento de ionomero de vidro modificado por resina (CIVMR) devido a baixa resistencia ao manchamento do material. Objetivo O objetivo desse estudo foi avaliar se o açaí compromete a cor e a rugosidade de superficie de um CIVMR in vitro. Materials e Método Amostras (2 mm de espessura, 8 mm de diámetro) de Vitremer™ (3M ESPE, St Paul, MN, USA) foram preparadas de acordo com as instrugoes do fabricante. O materialfoi espatulado, inserido em um molde de silicone colocado entre duas tiras de poliestireno e fotopolimerizado. Após, as amostras foram randomizadas e alocadas em tres grupos (n=25) de acordo com as solugoes usadas para a degradagao química: saliva artificial (controle) e sorbet de açaí e suco de açaí. Utilizou-se o espectrofotometro CM-2600d/2500d (Konica Minolta, Tokyo, Japan) para a análise da cor (escala CIELa*b*) e o rugosímetro Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan) para a rugosidade de superficie (Ra, mm). As amostras foram submetidas a tres imersoes diárias (6 ml, 15 minutos) em cada solugao por 14 dias a 37°C, tendo sido lavadas em água destilada e mantidas em saliva fresca (30 minutos) nos intervalos. Após a terceira imersao no dia, as amostras foram mantidas em saliva renovada até o dia seguinte. As variáveis foram analisadas antes (L*, a*, b*, Ra) e depois da degradagao química (L'*, a'*, b'*, Ra'). Resultados Os valores de pH da saliva, sorbet e suco foram, respectivamente 7,0, 3,8 e 4,9. Houve diferenga significante para ΔE* entre saliva (p=0.005) e suco (p=0.002) e entre suco e sorbet (p=0.019), mas nao entre saliva e sorbet (p=0.401). Nao foi observada diferenga significante para Δb* entre as solugoes. Nao houve diferenga significante para Δa* entre suco e sorbet, mas eles foram significativamente diferentes da saliva (p<0.001). A luminosidade (L*) mostrou alteragao significante. O suco mostrou os maiores valores de ΔE* (7,8) e ΔL* (7,7)". Nao houve mudanga significante para a rugosidade e nao foi observada diferenga significante entre as solugoes para ARa (p>0.05). Conclusao O açaí e a saliva causaram manchamento inaceitável do glaze do CIVMR e insignificante alteragao da rugosidade.

In vitro evaluation of the effect of different bleaching varnishes: Hydrogen peroxide penetration into the pulp chamber and color change.

OBJECTIVE: To evaluate the penetration of hydrogen peroxide (HP) into the pulp chamber and the color change of different bleaching varnishes in low concentrations used for at-home bleaching. MATERIALS AND METHODS: Ninety healthy premolars were used, randomly distributed into nine groups (n = 10) according to bleaching varnish (PL, PolaLuminate; VS, VivaStyle Paint On Plus; CA, Cavex Bite&White whitening pen and; AW AlignerWhite) and time (10 and 30 min), and a control group (no bleaching). The penetration of HP was evaluated by UV-Vis spectroscopy. To evaluate the color change (ΔEab , ΔE00 , ΔWID ) a digital spectrophotometer was used (α = 0.05). RESULTS: The AW group in 10 min and the control group showed similar and lower HP penetration in the pulp chamber when compared to the other groups (p = 0.003). Increasing the application time to 30 minutes elevated the amount of HP inside the pulp chamber for all groups (p = 0.003), except for PL (p > 0.05). When applied for 30 min all bleaching varnishes showed higher color change (ΔWID ) when compared to 10 min (p = 0.04). CONCLUSIONS: For all bleaching varnishes evaluated, PolaLuminate applied for 30 min showed lower penetration into the pulp chamber and higher bleaching effects. CLINICAL SIGNIFICANCE: The use of bleaching varnishes seems promising for teeth bleaching, but it varies according to user product and protocol.

Evaluación in vitro de la actividad antifúngica de extractos fluidos de Dichrostachys cinerea L. (marabú) frente a Candida albicans

Introducción: La Dichrostachys cinerea L. (marabú) es una planta que crece en Cuba, de la que se estudian propiedades medicinales. La resistencia de levaduras del género Candida a los antifúngicos sintéticos disponibles en la actualidad es cada vez mayor, por lo que se buscan nuevos compuestos de origen vegetal que puedan ser eficaces en el tratamiento de infecciones causadas por este germen. Objetivo: Evaluar la actividad antifúngica in vitro de Dichrostachys cinerea L. contra una cepa de Candida albicans. Métodos: Se realizó un estudio observacional analítico transversal in vitro para evaluar la actividad antifúngica de extractos fluidos de hojas y de tallos de D. cinerea L mediante el método de macrodilución en caldo y como sustancia de referencia el alcohol. Resultados: A través del proceso se mostró la actividad antifúngica del extracto fluido de tallos de D. cinerea L. al 50 % hasta la dilución 1/32, determinada como la concentración mínima inhibitoria; el extracto fluido de hojas al 30 % no logró inhibir el crecimiento de la cepa de Candida albicans ATCC 10231. Conclusiones: La actividad antifúngica del extracto fluido al 50 % de las hojas de Dichrostachys cinerea L. fue efectiva, no así el preparado farmacéutico al 30 %. Se determinó la concentración mínima inhibitoria del extracto fluido de hojas al 50 % y se demostró que ésta superó a la del alcohol al 50 % en tres diluciones contra la Candida albicans.

Introduction: Dichrostachys cinerea L. (marabou) is a plant that grows in Cuba, medicinal properties of this plant are being studied. The resistance of yeasts of the Candida genus to current available synthetic antifungals is increasingly greater. This is why, new compounds of plant origin are being searched for the effective treatment of infections caused by this germ. Objective: To evaluate the in vitro antifungal activity of Dichrostachys cinerea L against a strain of Candida albicans. Methods: An in vitro a cross-sectional analytic observational study was carried out to evaluate the antifungal activity of fluid extracts of D. cinerea L leaves and stems using the broth macro-dilution method and alcohol as the reference substance. Results: Through the process was shown the antifungal activity of the fluid extract of Dichrostachys cinerea L. stems at 50% up to the 1/32 dilution; it was determined as the minimum inhibitory concentration. The leaves fluid extract at 30% failed to inhibit the growth of the Candida albicans ATCC 10231 strain. Conclusions: The antifungal activity of the fluid extract at 50% of the leaves was effective, but not the pharmaceutical preparation at 30%. The minimum inhibitory concentration of the fluid extract of leaves at 50% was determined and it was shown that it exceeded that of alcohol at 50% in three dilutions against Candida albicans.

Assessing the toxicity of one-step-synthesized PEG-coated gold nanoparticles: in vitro and in vivo studies

ABSTRACT Objective To evaluate the in vitro and in vivo toxicities of polyethylene glycol-coated gold nanoparticles synthesized using a one-step process. Methods Gold nanoparticles were prepared via a co-precipitation method using polyethylene glycol, and the synthesis product was characterized. For the in vitro evaluation, a flow cytometry analysis with Annexin V and iodide propidium staining was used to assess cytotoxicity in MG-63 cells labeled with 10, 50, and 100µg/mL of nanoparticle concentration. For the in vivo evaluation, nanoparticles were administered intraperitoneally at a dose of 10mg/kg dose in 10-week-old mice. Toxicity was assessed 24 hours and 7 days after administration via histopathological analysis of various tissues, as well as through renal, hepatic, and hematopoietic evaluations. Results Synthesized nanoparticles exhibited different hydrodynamic sizes depending on the medium: 51.27±1.62nm in water and 268.12±28.45nm (0 hour) in culture medium. They demonstrated a maximum absorbance at 520nm and a zeta potential of -8.419mV. Cellular viability exceeded 90%, with less than 3% early apoptosis, 6% late apoptosis, and 1% necrosis across all labeling conditions, indicating minimal cytotoxicity differences. Histopathological analysis highlighted the accumulation of nanoparticles in the mesentery; however, no lesions or visible agglomeration was observed in the remaining tissues. Renal, hepatic, and hematopoietic analyses showed no significant differences at any time point. Conclusion Polyethylene glycol-coated gold nanoparticles exhibit extremely low toxicity and high biocompatibility, showing promise for future studies.

Potential Clinical Application of Organs-on-a-Chip in Periodontal Diseases: A Systematic Review of In Vitro Studies.

The periodontium is a unique organ from the standpoint of building an organ-on-a-chip (OoC) since it is a system that is continually threatened by microorganisms, their noxious compounds, and antigenic components. At the same time, periodontal health depends on a balanced connection between the host and the bacteria in the oral cavity, which is a complex micro-ecological environment. The objective of this systematic review of in vitro studies is to revise the potential clinical application of OoC in periodontal diseases. PRISMA was used to guide this analysis. The review framework made use of several databases, including SCOPUS, PubMed/MEDLINE, SCIELO, and LILACS as well as the gray literature. This systematic review comprised seven studies. The clinical efficacy of OoC in periodontal diseases was observed in models of the gingival crevice for the research of periodontitis, periodontal medication analysis, the interaction of multiple microbial species, pH measurements in in situ-grown biofilm, testing antimicrobial reagents, evaluation of mucosal interactions with microorganisms, and a device for quantitative exploration of microorganisms. OoC has the potential to advance our understanding of periodontal diseases by providing a more accurate representation of the oral microenvironment and enabling the development of new treatments.

Some Myths in Dentin Bonding: An Evidence-Based Perspective.

Laboratory investigations are essential models responsible for science development. However, laboratory discoveries must be confirmed in a clinical environment where many known and unknown variables and complex mechanisms are involved. Using conclusions from laboratory studies to make clinical recommendations can lead to widespread "unreliable truths" or so-called myths in any field of knowledge. These myths may increase the costs (financial and time) or even cause harm (side effects) that would be unnecessary, given that the current protocol or conduct was previously evaluated in a more complex and complete clinical setting. This article will discuss certain myths in dentin bonding that may influence clinical decision-making, bringing some principles of evidence-based practice to allow a more critical evaluation of the literature findings.

The influence of different culture media on Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus biofilm formation

Microorganisms such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus are frequently isolated in samples of urinary, blood, intestinal, and respiratory infections, among others. These bacteria are also associated with microbial biofilm formation. E. coli, P. aeruginosa, and S. aureus biofilm infections are particularly hard to manage and often associated with nosocomial problems. This study investigated the influence of different culture media on E. coli, P. aeruginosa, and S. aureus biofilm formation. Bacterial performance was evaluated in brain heart infusion broth, Mueller-Hinton broth, or tryptic soy broth, with or without supplementing with different glucose levels (1-5%). The study quantified biofilm biomass and the count of viable biofilm colonies. This is the first study that compares the biofilm formation of E. coli, P. aeruginosa and S. aureus in polystyrene using different culture media and with different glucose concentrations. The most robust growth of E. coli, P. aeruginosa, and S. aureus occurred in brain heart infusion broth supplemented with 5% glucose, Mueller-Hinton broth without glucose, and tryptic soy broth with 2% glucose, respectively. Our data demonstrate that behavioral and morphological characteristics of each bacterium require a specific broth to enhance the growth of these microorganisms. These findings will contribute to future tests for therapeutic alternatives with anti-biofilm potential.

Evaluation of different protocols for culturing mesenchymal stem cells derived from murine bone marrow

ABSTRACT Introduction: Culturing bone marrow mesenchymal stem cells (BM-MSCs) is a key point in different fields of research, including tissue engineering and regenerative medicine and studies of the bone marrow microenvironment. However, isolating and expanding murine BM-MSCs in vitro has challenged researchers due to the low purity and yield of obtained cells. In this study, we aimed to evaluate five different protocols to culture murine BM-MSCs in vitro. Methods: All protocols were based on the adhesion capacity of BM-MSCs to the tissue culture plastic surface and varied in the types of plate, culture media, serum, additional supplementation and initial cell density. Flow cytometry analysis was used to investigate lineage purity after expansion. Results: The expression of CD45 and CD11b was detected in the cultures generated according to all protocols, indicating low purity with the presence of hematopoietic cells and macrophages. The cellular growth rate and morphology varied between the cultures performed according to each protocol. Cells cultured according to protocol 5 (8 × 107cells/plate, Roswell Park Memorial Institute (RPMI) culture medium during first passage and then Iscove's Modified Delbecco's Medium (IMDM) culture medium, both supplemented with 9% fetal bovine serum, 9% horse serum, 12μM L-glutamine) presented the best performance, with a satisfactory growth rate and spindle-shape morphology. Conclusion: Our results point out that the purity and satisfactory growth rate of murine BM-MSC cultures are not easily achieved and additional approaches must be tested for a proper cell expansion.

Actividad antimicrobiana in vitro del extracto de hojas de Bixa orellana L. contra bacterias anaerobias asociadas a la vaginosis bacteriana y Lactobacillus spp / In vitro antimicrobial activity of Bixa orellana L. leaves extract against anaerobic bacteria associated to bacterial vaginosis and Lactobacillus spp.

Objetivos . Describir la actividad antimicrobiana in vitro del extracto metanólico de las hojas de Bixa orellana L. contra las bacterias anaerobias asociadas a la vaginosis bacteriana y Lactobacillus spp. Materiales y métodos . Se incluyeron en el estudio ocho cepas de referencia ATCC; Gardnerella vaginalis, Prevotella bivia, Peptococcus niger, Peptostreptococcus anaerobius, Mobiluncus curtisii, Atopobium vaginae, Veillonella parvula y Lactobacillus crispatus, y 22 aislamientos clínicos; once aislados de Gardnerella vaginalis y once aislados de Lactobacillus. La susceptibilidad antimicrobiana se determinó mediante el método de difusión en agar. La concentración mínima inhibitoria (CMI) y la concentración bactericida mínima (CBM) fueron determinadas utilizando el método de dilución en agar y un método de dilución modificado, respectivamente. Resultados . Todas las cepas de referencia ATCC tuvieron un alto nivel de susceptibilidad al extracto, con excepción de P. vibia, V. parvula y L. crispatus. Interesantemente, los aislamientos clínicos de G. vaginalis y la cepa ATCC de G. vaginalis fueron los más susceptibles al extracto dados los bajos valores de CMI (1,0 - 2,0 mg/mL) y CBM (1,0 - 4,0 mg/mL), mientras que, los aislamientos clínicos de Lactobacillus spp. y la cepa ATCC de L. crispatus fueron los menos susceptibles debido a los altos valores de CMI (32,0 mg/mL) y CBM (≥ 32,0 mg/mL). Conclusiones . Los experimentos in vitro sugieren que el extracto posee propiedades antibacterianas selectivas dada su alta actividad contra bacterias anaerobias asociadas a vaginosis bacteriana y baja actividad contra especies de Lactobacillus.

Objective. To describe the in vitro antimicrobial activity of the methanolic extract of Bixa orellana L. leaves against anaerobic bacteria associated to bacterial vaginosis and Lactobacillus spp. Materials and methods. Eight ATCC reference strains; Gardnerella vaginalis, Prevotella bivia, Peptococcus niger, Peptostreptococcus anaerobius, Mobiluncus curtisii, Atopobium vaginae, Veillonella parvula, and Lactobacillus crispatus, and twenty-two clinical isolates; eleven Gardnerella vaginalis and eleven Lactobacillus strains, were included in the study. The antimicrobial susceptibility was determined by the agar diffusion method. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined by using agar dilution and a modified dilution plating method, respectively. Results. All ATCC reference strains showed high levels of susceptibility to the extract, except P. vibia, V. parvula and L. crispatus. Interestingly, all G. vaginalis clinical isolates and the G. vaginalis ATTC strain were the most susceptible to the extract, given their low MIC (1.0 - 2.0 mg/mL) and MBC (1.0 - 4.0 mg/mL) values, whereas, the Lactobacillus spp. clinical isolates and the L. crispatus ATCC strain were the least susceptible bacteria given their high MIC (32.0 mg/mL) and MBC (≥ 32.0 mg/mL) values. Conclusions. In vitro experiments suggest that the extract possesses selective antimicrobial properties given its high activity against bacterial vaginosis-associated anaerobic bacteria and low activity against Lactobacillus species.

Avaliação da composição química de um óleo de copaíba (Copaifera spp) e seu efeito em células-tronco mesenquimais / Evaluation of the chemical composition of a copaiba oil (Copaifera spp) and its effect on mesenchymal stem cells

A oleorresina obtida de copaíferas é amplamente utilizada na medicina tradicional brasileira. Este estudo avaliou a composição química por Cromatografia Gasosa (CG) e o efeito da oleorresina de Copaifera officinalis em células-tronco. Para isso as células foram tratadas com a oleorresina nas concentrações de 0,5, 20, 110, 140, 170 ou 200 µg/ml por 24h. A avaliação por CG identificou os sesquiterpenos ß-cariofileno, trans-α-bergamoteno e óxido de cariofileno II como os compostos majoritários da oleorresina. As menores concentrações de oleorresina utilizadas apresentaram resultados semelhantes ao grupo controle e as maiores concentrações diminuíram significativamente a viabilidade celular e apresentaram maior citotoxicidade. Como conclusão, os principais componentes encontrados na oleorresina de copaíba foram os sesquiterpenos e as baixas concentrações testadas não foram citotóxicas. O aumento das concentrações de oleorresina de copaíba promoveu diminuição da viabilidade celular e aumento dos efeitos citotóxicos nas células-tronco. Embora a oleorresina de copaíba tenha uso etnofarmacológico na cicatrização, este estudo demonstrou efeito citotóxico em células-tronco, as quais estão relacionadas ao processo de regeneração corpóreo. Portanto, deve-se ter cuidado com a dosagem de oleorresina a ser utilizada, uma vez que este estudo in vitro mostrou citotoxicidade e um impacto negativo na viabilidade das células-tronco nas mais altas concentrações testadas. [au]

Oleoresinobtained from Copaifera trees is extensively used in Brazilian traditional medicine. This study hasevaluated the chemical composition and effect of Copaifera officinalisoleoresin on stem cells. The oleoresin was analyzed by Gas Chromatography (GC) and the cells were treated with the oleoresin at concentrations of 0.5, 20, 110, 140, 170 or 200 µg/ml for 24h for cellular tests. GC identified the sesquiterpenes beta-caryophyllene, trans-alpha-bergamotene, and caryophyllene oxide II as the main compounds in oleoresin. The cell viability and cytotoxicity assays showed the lowest concentrations of oleoresin used presented similar results to the control group and the higher concentrations tested significantly decreased cell viability and increased cytotoxicity. In a conclusion, the main components found in copaiba oleoresin were sesquiterpenes and the low tested concentrations were not cytotoxic. The increased concentrations of copaiba oleoresin promoted a decrease in cell viability and an increase of cytotoxicity in the stem cells. Although copaiba oleoresin has ethnopharmacology use in healing, this study showed toxicity in stem cells, which are related to the corporeal regeneration process. Therefore, caution must be taken with the dosage of the oleoresin to be used since this in vitro study showed cytotoxicity and a negative impact on stem cell viability at the higher tested concentrations. [au]

Parámetros para la evaluación visual e instrumental del color dental en estudios in-vitro. Revisión de la literatura / Parameters for visual and instrumental assessment of tooth colour in in-vitro studies. Literature review

Objetivo: establecer los parámetros para la evaluación visual e instrumental del color dental en estudios in-vitro a partir de la literatura científca publicada entre 2015 y 2021. Métodos: se realizó la búsqueda en las bases de datos: PubMed, Web of Science, Science Direct, Scopus, Scielo y Lilacs; también en el motor de búsqueda Google Académico y las bibliotecas de las editoriales Wiley y Springer. Las palabras clave utilizadas fueron tooth, color, in-vitro, color perception, shade matching, thresholds, appearance, surrounding, "CIELAB" y "CIEDE2000". Teniendo en cuenta los criterios de elegibilidad, se seleccionaron los estudios de acuerdo al título, resumen y texto completo. Resultados: la búsqueda arrojó un total de 37 publicaciones que se agruparon en tres tópicos: 1. toma de color visual: condiciones ambientales, observadores y nivelación; 2. toma de color instrumental: instrumentos; y 3. procesamiento de datos: cálculo de la diferencia de color y umbrales de perceptibilidad (PT) y aceptabilidad (AT). Conclusiones: los aspectos más importantes en la evaluación visual son la iluminación, el ambiente para registro (sitio, entorno y fondo alrededor de la muestra), las condiciones geométricas de visualización, los observadores y el uso de guías. En la evaluación instrumental es relevante elegir el aparato apropiado de acuerdo con su precisión y reproducibilidad, como los espectroradiómetros y los espectrofotómetros de uso clínico. Se presenta el procesamiento de datos para establecer las variaciones de cada coordenada, las diferencias de color (ΔE): CIELAB y CIEDE2000, los umbrales y los lineamientos.

Objective: To establish the parameters for the visual and instrumental evaluation of tooth color in in-vitro studies based on the scientifc literature published between 2015 and 2021. Methods: The search was carried out in the databases of PubMed, Web of Science, Science Direct, Scopus, Scielo, Lilacs; search engine Google Scholar and publishers' library of Wiley and Scielo, using the keywords "tooth", "color", "in vitro", "color perception", "shade matching", "thresholds", "appearance", "surrounding", "CIELAB", and "CIEDE2000". The literature was selected according to the title, abstract and full text taking into the eligibility criteria. Results: It yielded a total of 37 publications, which were grouped into three topics: 1. visual color acquisition: environmental conditions for color acquisition, observers and levelling. 2. instrumental color sampling: instruments. 3. Data processing: Calculation of color diference and perception thresholds (PT) and acceptability thresholds (AT). Conclusions: The most important aspects in the visual assessment are lighting, the environment for color registration (site, environment and background around the sample), the geometric conditions of visualization, the observers and the use of guides. Regarding the instrumental assessment of color, the appropriate devices must be chosen according to its precision and reproducibility, being the spectrophotometers and spectroradiometers the most precise ones. It is presented how the data processing is carried out to establish the variations of each coordinate, the color diferences (ΔE): CIELAB and CIEDE2000, thresholds and guidelines.