Three-dimensional printing in orthopaedic surgery: A review of current and future applications.

Three-dimensional (3D) printing is a form of technology in which 3D physical models are created. It has been used in a variety of surgical specialities ranging from cranio-maxillo-facial to orthopaedic surgery and is currently an area of much interest within the medical profession. Within the field of orthopaedic surgery, 3D printing has several clinical applications including surgical education, surgical planning, manufacture of patient-specific prostheses/patient specific instruments and bone tissue engineering. This article reviews the current practices of 3D printing in orthopaedic surgery in both clinical and pre-clinical settings along with discussing its potential future applications.

Clinical outcomes and significance of postoperative ultrasound biomicroscopy in patients with Boston type 1 keratoprosthesis

ABSTRACT Purpose: To determine the clinical outcomes in patients after type 1 Boston keratoprosthesis surgery and the significance of ultrasound biomicroscopy imaging for postoperative follow-up. Methods: This retrospective analysis included 20 eyes of 19 patients who underwent corneal transplantation with type 1 Boston keratoprosthesis between April 2014 and December 2021. Data on patient demographics, preoperative diagnosis, visual acuity, and postoperative clinical findings were analyzed. Results: Type 1 Boston keratoprosthesis implantation resulted in intermediate- and long-term positive outcomes. However, blindness and other serious complications such as glaucoma, retroprosthetic membrane formation, endophthalmitis, or retinal detachment also occurred. The use of ultrasound biomicroscopy imaging allowed for better evaluation of the back of the titanium plate, anterior segment structures, and the relationship of the prosthesis with surrounding tissues, which provided valuable postoperative information. Conclusion: Regular lifetime monitoring and treatment are necessary in patients who undergo Boston type 1 keratoprosthesis implantation for high-risk corneal transplantation. ultrasound biomicroscopy imaging can be a valuable imaging technique for the evaluation of patients with Boston type 1 keratoprosthesis, providing important information on anterior segment anatomy and potential complications. Further studies and consensus on postoperative follow-up protocols are required to optimize the management of patients with Boston type 1 keratoprosthesis.

Postoperative challenges addressed through nursing care of patients receiving lower extremity tumor prosthesis.

BACKGROUND: Patients with primary Bone Sarcoma and Giant Cell Tumors in the lower extremities often require major surgery involving tumor prostheses. The postoperative course for this patient group can be complex and influenced by various factors and challenges that demand careful nursing care. This study aims to identify challenges related to the nursing care of individuals with primary bone tumors following surgery for tumor prostheses in the lower extremities. METHODS: A retrospective cohort study of 15 patients treated at Rigshospitalet, Copenhagen, Denmark, between November 5. 2016, and April 1. 2020 was conducted by medical record review, focusing on challenges related to postoperative nursing care. All patients with the surgery code "Bone Excision" were identified within the surgery booking system and screened for eligibility. RESULTS: Patients experienced postoperative challenges such as severe pain, prolonged time to mobilization (mean: 4 days), and defecation (mean: 5 days). The mean length of stay at the Rigshospitalet was 13 days. Furthermore, eleven patients (73%) reported disrupted sleep and nausea. CONCLUSION: Patients undergoing tumor prosthesis surgery in the lower extremities face considerable postoperative challenges that contribute to a prolonged hospital stay. These challenges, including severe pain, delayed mobilization, and gastrointestinal issues, significantly impact recovery. The findings highlight the urgent need for targeted nursing interventions to address these issues effectively. Enhanced pain management protocols, early mobilization strategies, and comprehensive postoperative care plans are essential to improve patient outcomes and reduce the length of hospital stays. Addressing these challenges through dedicated nursing care is crucial for optimizing the recovery process for patients receiving lower extremity tumor prostheses.

The neurophysiology of sensorimotor prosthetic control.

Movement is a central behavior of daily living; thus lost or compromised movement due to disease, injury, or amputation causes enormous loss of productivity and quality of life. While prosthetics have evolved enormously over the years, restoring natural sensorimotor (SM) control via a prosthesis is a difficult problem which neuroengineering has yet to solve. With a focus on upper limb prosthetics, this perspective article discusses the neurophysiology of motor control under healthy conditions and after amputation, the development of upper limb prostheses from early generations to current state-of-the art sensorimotor neuroprostheses, and how postinjury changes could complicate prosthetic control. Current challenges and future development of smart sensorimotor neuroprostheses are also discussed.

Spatially Selective Retinal Ganglion Cell Activation Using Low Invasive Extraocular Temporal Interference Stimulation.

Conventional retinal implants involve complex surgical procedures and require invasive implantation. Temporal Interference Stimulation (TIS) has achieved noninvasive and focused stimulation of deep brain regions by delivering high-frequency currents with small frequency differences on multiple electrodes. In this study, we conducted in silico investigations to evaluate extraocular TIS's potential as a novel visual restoration approach. Different from the previously published retinal TIS model, the new model of extraocular TIS incorporated a biophysically detailed retinal ganglion cell (RGC) population, enabling a more accurate simulation of retinal outputs under electrical stimulation. Using this improved model, we made the following major discoveries: (1) the maximum value of TIS envelope electric potential ([Formula: see text] showed a strong correlation with TIS-induced RGC activation; (2) the preferred stimulating/return electrode (SE/RE) locations to achieve focalized TIS were predicted; (3) the performance of extraocular TIS was better than same-frequency sinusoidal stimulation (SSS) in terms of lower RGC threshold and more focused RGC activation; (4) the optimal stimulation parameters to achieve lower threshold and focused activation were identified; and (5) spatial selectivity of TIS could be improved by integrating current steering strategy and reducing electrode size. This study provides insights into the feasibility and effectiveness of a low-invasive stimulation approach in enhancing vision restoration.

Feasibility of predicting changes in gait biomechanics following muscle strength perturbations using optimal control in patients with transfemoral amputation.

Bone-anchored limbs (BALs) are socket prosthesis alternatives, directly fixing to residual bone via osseointegrated implant. There is a need to quantify multi-level effects of rehabilitation for transfemoral BAL users (i.e. changes in joint loading and movement patterns). Our primary objective was determining feasibility of using optimal control to predict gait biomechanics compared to ground-truth experimental data from transfemoral BAL users. A secondary objective was examining biomechanical effects from estimated changes in hip abductor muscle strength. We developed and validated a workflow for predicting gait biomechanics in four transfemoral BAL users and investigated the biomechanical effects of altered hip abductor strengths.

Feasibility of Freedom of Information Requests for Amputee Epidemiology in the United Kingdom.

Introduction: While each of the 44 National Health Service commissioned artificial limb clinics in the United Kingdom record information about their own prosthetic limb users, these are not collated to give a national picture of amputee epidemiology. The requirement to respond to Freedom of Information (FoI) requests within 20 working days offers another way of extracting data from all centres, and this study describes a first attempt to use this method to update national epidemiological data. Methods: Questions were sent to the FoI email addresses of all 44 centres, requesting numbers of adult unilateral below-knee amputees, adult unilateral above or through-knee amputees and child unilateral above or through-knee amputees (all of K2 level mobility), numbers of people consistently using a prosthesis with a single axis myoelectric hand, and access to an occupational therapist with skills to teach someone to use a myoelectric hand. A FoI request was sent to NHS England seeking release of data that they collect every month from all the prosthetic services which they commission in England. Results: All but one of the UK centres responded, the great majority within 31 days. Incomplete results were generally due to centres finding the questions ambiguous and many did not record mobility levels consistently. While 33 centres had access to skilled occupational therapy, only 4 reported more than 10 patients who constantly used a single axis myoelectric hand. Eighteen centres were unable to provide complete data, and the remainder reported a ranges of 5 to 992 below-knee amputees, 7 to 574 adult above-knee amputees and 0 to 137 child above-knee amputees, suggesting different approaches to managing missing mobility level data. Conclusions: Freedom of Information requests are an inexpensive way of gathering data from NHS prosthetic clinics, which can identify age, sex, level of amputation but not activity levels or use of a prosthesis and hence only gives limited demographic information of the amputee cohort.

Adhesion of retinal cells to gold surfaces by biomimetic molecules.

Background: Neural cell-electrode coupling is crucial for effective neural and retinal prostheses. Enhancing this coupling can be achieved through surface modification and geometrical design to increase neuron-electrode proximity. In the current research, we focused on designing and studying various biomolecules as a method to elicit neural cell-electrode adhesion via cell-specific integrin mechanisms. Methods: We designed extracellular matrix biomimetic molecules with different head sequences (RGD or YIGSR), structures (linear or cyclic), and spacer lengths (short or long). These molecules, anchored by a thiol (SH) group, were deposited onto gold surfaces at various concentrations. We assessed the modifications using contact angle measurements, fluorescence imaging, and X-ray Photoelectron Spectroscopy (XPS). We then analyzed the adhesion of retinal cells and HEK293 cells to the modified surfaces by measuring cell density, surface area, and focal adhesion spots, and examined changes in adhesion-related gene and integrin expression. Results: Results showed that YIGSR biomolecules significantly enhanced retinal cell adhesion, regardless of spacer length. For HEK293 cells, RGD biomolecules were more effective, especially with cyclic RGD and long spacers. Both cell types showed increased expression of specific adhesion integrins and proteins like vinculin and PTK2; these results were in agreement with the adhesion studies, confirming the cell-specific interactions with modified surfaces. Conclusion: This study highlights the importance of tailored biomolecules for improving neural cell adhesion to electrodes. By customizing biomolecules to foster specific and effective interactions with adhesion integrins, our study provides valuable insights for enhancing the integration and functionality of retinal prostheses and other neural implants.

Optimizing Function and Aesthetics in Kennedy Class 1 Prosthetic Rehabilitation: A Case Report.

When dealing with a partially edentulous patient requiring rehabilitation for a distal extension, the situation becomes challenging if the patient is unwilling to consider placing implants or using a removable prosthesis. A patient with partial tooth loss may find it difficult to receive a satisfactory repair, especially if the missing teeth are at the back. The surrounding gum tissue and the underlying bone ridges provide support for dentures that encase natural teeth. During functional activities, these components are frequently exposed to different stresses, which can substantially affect the remaining natural teeth and bone structure. Precision attachments are complex devices made up of two parts: one incorporated into a detachable dental prosthesis and the other fastened to the natural teeth. Their function is to give the prosthetic stability and retention. A fixed partial denture is impractical when there is no distal abutment. However, by offering a combination prosthesis, this difficulty can be solved. Without requiring surgery, this method provides the benefit of a fixed prosthesis. We are presenting a case of management for a 56-year-old patient with unilateral distal extension with a combined prosthesis of acrylic retained by an extra coronal precision attachment system.

Artificial intelligence and health-related data: The patient's best interest and data ownership dilemma.

The rapid advancement of artificial intelligence (AI) in healthcare has the potential to revolutionize the global healthcare sector and medicine in general. However, integrating AI technologies in healthcare requires access to large amounts of personal health-related data (HRD), which raises concerns regarding confidential personal information considering unregulated and not transparent data ownership. Setting up the patient's welfare as an unquestionable principle, this commentary explores the various ethical aspects of using HRD in AI applications, focusing on informed consent, data ownership, data sharing, financial considerations, accountability, and ethical standards. Three models of potential collaboration between AI-specializing firms and healthcare providers are evaluated: the commercial model, the equitable profit-sharing model, and the public-funded non-profit model. Each model has its advantages and challenges, necessitating a careful balance between ethical considerations, financial implications, and technological advancements. Policymakers and healthcare regulators are urged to establish transparent legislation to safeguard patient privacy, ensure informed consent, and promote the responsible use of HRD in AI applications. This commentary emphasizes the importance of addressing ethical issues to protect basic patient rights, foster responsible collaborations, and ensure the ethical use of health-related data in AI-based healthcare applications. While the coexistence of regulated AI and healthcare professionals is inevitable for validating the cost-effectiveness of AI use in healthcare economics, the transparency of HRD sources is deemed of utmost importance in the best interest of the patient.

What does the SOFCOT-RENACOT 2024 hip prosthesis register tell us?

INTRODUCTION: The French Society of Orthopedic and Traumatology Surgery (SOFCOT) multicenter register of hip prostheses (HP) has been collecting data from nearly 100 centers in France since 2006. After 18 years of collection, this analysis was carried out to deduce the main conclusions. HYPOTHESIS: Despite its low representativeness (3%), this register provides instructive information on the evolution of hip arthroplasty techniques and implants in France. MATERIAL AND METHODS: As of the 31st of December 2023, 58,314 primary HP were recorded, mainly for primary osteoarthritis (44,535 hips, 76.4%), followed by femoral neck fractures (4,880, 8.4%). The mean age was 71 years (SD, 11.6) with 57% (33,305) women. In total, 73% of the implants were uncemented and 170 brand names were listed. Over the same period, 5,853 first reoperations were recorded. Social security number matching identified 777 revisions of an already registered primary HP. The revision index for 100 components observed per year (RCOY) allows the performance of implants to be compared (alert threshold if >1.3). RESULTS: The causes of these 777 early first revisions at a short mean follow-up (MF) of 1.4 years were: dislocation (191/777, 24.6%), peri-prosthetic fracture (175, 22.5%), aseptic loosening (103, 13.3%) and acute infection (101, 13%). The RCOY for all primary HP was 0.25 at 5.4 years of MF. This index: (i) Depended on the type of implant: 0.23 for HP with dual-mobility cups (DMC) at 4.7 years of MF; 0.25 for HP with short femoral stems at 4.4 years; and 0 for resurfacing after only 2.5 years (due to the creation of a specific mandatory register, since 2015, which put an end to the voluntary inclusion of resurfacing in this general register). (ii) Depended on the method of fixation: 0.21 for completely cemented HP at 7.8 years of MF and 0.29 at 4.9 years for completely uncemented HP. (iii) Based on the friction torque: 0.12 for conventional metal-metal HP at 9.7 years of MF and 0.29 at 5.1 years for alumina-alumina HP. (iv) Finally, 3 arthroplasties with 3 uncemented stems had an RCOY > 1.3. DISCUSSION: Although the RCOY of HP with conventional cemented femoral stems is only 0.16 at 6.6 years of MF, while that of HP with conventional uncemented stems is 0.29 at 4.9 years, the trend towards uncemented femoral fixation has continued to intensify. Resurfacing gives good results following careful selection of implants but with a short MF of 2.5 years. Conventional metal-metal bearings continue to give excellent results at almost 10 years of MF. The 10-year survival of HP with short femoral stems is favorable compared to that of HP with conventional stems. There is no significant difference between the survival of HP with conventional versus highly cross-linked polyethylene liner. CONCLUSION: Despite its low representativeness, this register provides information on the techniques and implants used in France. The addition of clinical monitoring and PROM within the new SOFCOT-RENACOT registry as well as re-certification obligations should help promote its development. LEVEL OF EVIDENCE: III; prospective comparative study.

Temporomandibular joint alloplastic replacement failure.

Temporomandibular joint disorders are common, with alloplastic temporomandibular joint replacement (TMJR) being one method of addressing chronic pain and movement limitations that cannot otherwise be managed. Despite this, TMJR has known complications that can lead to failure. We present our experience of managing these cases and review the current evidence on the management and outcomes of alloplastic TMJR failures. Until 2015 our unit regularly used Dundee full metal prostheses, and encountered multiple issues such as infection, heterotopic bone formation, and progression of osteoarthritis beneath the condylar element. We also present our experience with other standard TMJR implants. One common cause of failure we observed is improper placement of a prosthesis due to poor technique, for instance, placement of the fossa implant too close to the ear canal can cause unresolved postoperative pain. There is no consensus on the management of TMJR, but non-surgical measures are preferred initially and surgical intervention is reserved for later stages. Recently our unit has managed numerous failure cases, employing a multidisciplinary approach combined with thorough preoperative planning and postoperative care, which has proven effective in reducing complications and improving outcomes. Based on our experience, we do not recommend the use of Dundee full metal prostheses for TMJR. Appropriate training in the placement of contemporary implants remains crucial. Suboptimal alignment of the implant in some cases does not need surgical intervention, but surgical management is justifiable in cases of persistent symptoms and functional limitations. When placing stock implants or designing a custom-made implant for an adult, we recommend that the posterior edge of the fossa component is at least 3 mm away from the bone of the ear canal.

[Role of cranioplasty in the management of decompressive craniectomies: Study of the Adolphe de Rothschild Foundation Hospital cohort over 7 years]. / Place de la cranioplastie dans la prise en charge des crâniectomies décompressives : étude de la cohorte de l'Hôpital Fondation Adolphe de Rothschild sur 7 ans.

OBJECTIVES: The objective of our study is to take stock of the cranioplasty implants used within our establishment. MATERIALS AND METHOD: We analyzed the patients files who underwent craniectomy followed by cranioplasty between 2017 and 2023, with at least 1 year of follow-up after cranioplasty (n=75). The data were extracted from the computerized patient file (DxCare®, Dédalus) and the pharmaceutical management tool for drugs and sterile medical devices (Pharma®, Computer Engineering). The sex ratio, indication for craniectomy, operating time, time between craniectomy and cranioplasty, complications and aesthetic result were statistically analyzed. RESULTS: The main indications are stroke (n=59; 78.5%) and aneurysms (n=7; 9.5%). Among the 75 patients, 52 benefited from the placement of a custom implant (PolyEtherEtherCetone/PEEK or Hydroxyapatite) and 23 from cementoplasty. The operating time was significantly shorter (P<0.05) for custom cranioplasty (1.93±0.61h vs. 1.62±0.53). Only 4 patients (5.3%) were not satisfied with the aesthetic result following the placement of a custom implant. A greater risk of infection was found in the context of cementoplasty (43% for cementoplasties vs. 25% for the custom implant, so χ2 (P=0.1095), this difference not being statistically significant. CONCLUSION: This collaborative work between the pharmacy and the adult neurosurgery department served to establish an initial register for monitoring patients who have undergone cranioplasty for whom the ideal implant remains to be determined.

The Effect of Cigarettes Smoke on the Color and Properties of a Silicone for Maxillofacial Prostheses.

Although deterioration of silicone maxillofacial prostheses is severely accentuated in smoking patients, the phenomenon has not been systematically studied. To address a gap in the literature concerning the stability of maxillofacial prostheses during service, in this contribution, the effect of cigarette smoke on the aspect and physical properties of M511 silicone elastomer was evaluated. The aspect, surface, and overall properties of the silicone material, pigmented or not, were followed by AFM, color measurements, FTIR, water contact angle measurements, TGA-DTG and DSC, hardness and compression stress-strain measurements. The types of the contaminants adsorbed were assessed by XRF, ESI-MS, MALDI-MS, and NMR spectral analyses. Important modifications in color, contact angle, surface roughness, local mechanical properties, and thermal properties were found in the silicone material for maxillofacial prostheses after exposure to cigarettes smoke. The presence of lead, nicotine, and several other organic compounds adsorbed into the silicone material was emphasized. Slight decrease in hardness and increase in Young's modulus was found. The combined data show important impact of cigarette smoke on the silicone physical properties and could indicate chemical transformations by secondary cross-linking. To our knowledge, this is the first study making use of complementary physical methods to assess the effect of cigarette smoke on the aspect and integrity of silicone materials for maxillofacial prostheses.

Revision of the Wolford protocol for managing infections in temporomandibular joint prostheses: an updated surgical approach.

The management of infected temporomandibular joint prostheses presents a surgical challenge. In certain instances, an intermediate approach involving biofilm debridement and local antibiotic instillation may obviate the need for prosthesis removal. This technical note describes an update of the technique outlined by Wolford for managing infections, in which improved materials are used to implement the technique.

Classification of Complete-Arch Implant Scanning Techniques Recorded by Using Intraoral Scanners.

OBJECTIVES: To classify the complete-arch implant scanning techniques recorded by using intraoral scanners (IOSs). OVERVIEW: Different implant scanning techniques have been described for recording complete-arch implant scans by using IOSs. However, dental literature lacks on a classification of these implant scanning techniques. Implant scanning techniques aim is to record the 3-dimensional position of the implants being scanned, while implant scanning workflows require additional scans to record all the information needed for designing an implant prosthesis. This additional information includes soft tissue information, tooth position, antagonist arch, and maxillomandibular relationship. CONCLUSIONS: There are five complete-arch implant scanning techniques captured by using IOSs: non-splinting, non-calibrated splinting, calibrated implant scan bodies, calibrated frameworks, and reverse impression methods. The digital workflow varies depending on the implant scanning technique selected. CLINICAL SIGNIFICANCE: The understanding of the varying implant scanning techniques and the main differences among them may ease the decision criteria for recording digital implant scans by using intraoral scanners.

Optical and Mechanical Properties of the Multi-Transition Zones of a Translucent Zirconia.

OBJECTIVE: To characterize the composition, flexure resistance, and optical properties of a multilayer translucent zirconia in relation to its multi-transition zones. MATERIALS AND METHODS: A multilayer zirconia (5Y/4Y) and a conventional 3 mol% yttria partially stabilized zirconia (3Y) were investigated. Bar-shaped specimens were obtained from the enamel and dentin layers, and the vertical cross-section of 5Y/4Y (N = 10). A four-point flexural (σf) test was performed using a universal testing machine (1.0 mm/min). Plate-shaped specimens (N = 6) were also produced from the enamel, transition 1, transition 2, and dentin layers. Translucency parameters (TPab and TP00) were determined using a dental spectrophotometer (N = 6). X-ray fluorescence and X-ray diffraction techniques were used to analyze elemental (N = 2) and phase compositions (N = 2), respectively. Data were analyzed using analysis of variance (ANOVA) and Tukey's test (α = 0.05). RESULTS: The yttrium content and σf varied between layers of 5Y/4Y. 3Y had the highest σf, followed by dentin. Enamel and cross-section showed lower and statically similar σf. 3Y and dentin groups had similar but statistically lower TPab and TP00 than the enamel. CONCLUSIONS: Different layers of multilayered zirconia have distinct compositions, which affect their mechanical and optical properties. The weak enamel layer compromises the mechanical properties of cross-sectional specimens. CLINICAL SIGNIFICANCE: The development of novel cubic-containing multilayer zirconia ceramics to produce monolithic restorations brings new challenges to dental clinicians and laboratory technicians. The CAD/CAM design of multilayered 5Y/4Y restorations should consider the esthetic and mechanical requirements of each clinical case, as different properties are found in the different layers of these materials.

Prosthetic Rehabilitation for a Patient With Purpura Fulminans Undergoing Quadruple Amputation: A Case Report.

Purpura fulminans (PF) is a rare and life-threatening syndrome characterized by cutaneous purpura resulting from disseminated intravascular coagulation (DIC) and intravascular thrombosis. PF typically develops as a severe complication of infections and is associated with high mortality rates. Effective treatment involves early recognition, aggressive resuscitation, appropriate antibiotic therapy, and the correction of coagulation abnormalities. Nevertheless, despite effective treatment, patients often ultimately require amputation of the affected limbs. This case report details the rehabilitation process of a patient with PF who underwent quadruple amputation. The patient, a 48-year-old male, underwent quadruple amputation due to PF. After intensive care, he was admitted to a convalescent rehabilitation ward for prosthetic rehabilitation. The rehabilitation process combined physical and occupational therapy to facilitate independent living through the use of upper and lower limb prostheses and assistive devices. The patient presented with ulcerative lesions on the anterior surfaces of both knee joints upon admission. During treatment, he developed osteomyelitis of the right patella, which required intravenous antibiotics and limited rehabilitation to bed-based exercises. Following the administration of intravenous therapy, the prosthetist proceeded with the fabrication of lower limb prostheses. Subsequently, the patient was able to commence standing and gait training, and by the time of discharge, he was able to walk without a cane. Upper limb prostheses enabled independence in activities of daily living (ADLs) such as eating, dressing, and toileting. He was also able to perform cooking-related activities that are part of the instrumental activities of daily living (IADLs). This case highlights the importance and achievable outcomes of rehabilitation for patients with PF who have undergone quadruple amputation. A multidisciplinary approach utilizing both upper and lower limb prostheses, as well as assistive devices, enabled significant functional recovery.

Replacement Implant-Retained Ear Prosthesis Using Semi-Digital Workflow: A Case Report.

Defects in the facial region can be treated by maxillofacial prostheses however, fabrication of the prosthesis is a time-consuming process. The short lifetime of silicone material due to inherent deterioration has stimulated a search for more practical methods. This case report involves a semi-digital workflow for replacement of an ear prosthesis. The existing contralateral intact ear and retentive bar of the existing prosthesis were scanned using an intraoral scanner. Resin models of the bar and the mirror image of the ear were fabricated using a 3D printer and wax replicas were obtained using silicone impression material. This method was successful, time-saving, and comfortable for the clinician and patient.

Analysis of Long-Term Success and Biological Complications in Zygomatic Implant-Supported Prostheses.

Introduction: Patients with significant maxillary atrophy who are not candidates for standard implants now have an option thanks to zygomatic implants. Long-term statistics on difficulties and success are, however, scarce. Methods: A tertiary care center's patient data were retrospectively analyzed. Included were patients who underwent zygomatic implant surgery between 2017 and 2022. This research gathered and examined data on follow-up, surgical techniques, complications, demographics, and implant features. Findings: There were 100 patients in all. 92% of the implants were successful, and 92 of them survived. Peri-implantitis (20%), soft tissue dehiscence (15%), sinusitis (10%), prosthesis fracture (8%), and infection (5%), were among the biological consequences. In summary, zygomatic implants have the potential to help individuals with severe maxillary atrophy recover, but close observation and effective management of any problems are necessary to maximize results. To enhance patient care and improve treatment regimens, further research is required.