Chronic Recurrent Osteomyelitis of Ribs Due to Bamboo Stick Injury in an Adult Man: A Case Report.

Introduction: Chronic osteomyelitis of the ribs in adolescents and adults is a rare condition. Current understanding of its diagnosis and management is primarily derived from case reports and small series studies. Here, we present a case of chronic rib osteomyelitis initially managed conservatively with antibiotics, followed by debridement, sequestrectomy, and continued antibiotic therapy. However, due to recurrence, rib excision was ultimately chosen as the definitive management approach. Case Report: A 18-year-old male presents with a discharging sinus from the chest persisting for 6 months, with no history of fever, shivering, or weight loss. He sustained a blunt injury to the chest with a bamboo stick 9 months ago. Initially, the patient was treated with antibiotics, but there was no relief. He was later operated on with debridement, sequestrectomy, and antibiotics. Six weeks later, he again presented to us with a discharging sinus. Due to recurrence, he underwent re-operation with partial resection of the 6th rib. At the 1-year follow-up after rib excision, the patient is doing well, with all blood parameters within the normal range and without any systemic or local complications. Conclusion: Rib osteomyelitis is a rare complication of blunt chest trauma. Surgical management is indicated in cases of persistent infection. Sequestrectomy and antibiotics, though standard procedures in chronic osteomyelitis, may encounter failure due to various factors. Moreover, due to limited literature on chronic osteomyelitis of ribs, the standard approach to its management is not available. Partial excision of the rib with appropriate antibiotics in our case provided complete cure for the patient.

Experimental and Numerical Study of a Trapezoidal Rib and Fan Groove Microchannel Heat Sink.

A novel microchannel heat sink (TFMCHS) with trapezoidal ribs and fan grooves was proposed, and the microchannel was manufactured using selective laser melting technology. Firstly, the temperature and pressure drop at different power levels were measured through experiments and then combined with numerical simulation to explore the complex flow characteristics within TFMCHSs and evaluate the comprehensive performance of microchannel heat sinks based on the thermal enhancement coefficient. The results show that, compared with rectangular microchannel heat sinks (RMCHSs), the average and maximum temperatures of TFMCHSs are significantly reduced, and the temperature distribution is more uniform. This is mainly caused by the periodic interruption and redevelopment of the velocity boundary layer and thermal boundary layer caused by ribs and grooves. And as the heating power increases, the TFMCHS has better heat dissipation performance. When P=33 W and the inlet flow rate is 32.5 mL/min, the thermal enhancement factor reaches 1.26.

Effectiveness of a mental health literacy module on stigma related mental health knowledge and behaviour among youth in two educational settings in Chennai, South India: A quasi-experimental study.

BACKGROUND: Improving mental health literacy (MHL) can reduce stigma towards mental illness, decreasing delays in help-seeking for mental disorders such as psychosis. We aimed to develop and assess the impact of an interactive MHL intervention on stigma related mental health knowledge and behaviour (SRMHKB) among youth in two urban colleges in South India. METHODS: Incorporating input from stakeholders (students, teachers, and mental health professionals), we developed a mental health literacy module to address SRMHKB. The module was delivered as an interactive session lasting 90 min. We recruited 600 (300 males; 300 females; mean age 19.6) participants from two city colleges in Chennai from Jan-Dec 2019 to test the MHL module. We assessed SRMHKB before the delivery of the MHL intervention, immediately after, and at 3 and 6 months after the intervention using the Mental Health Knowledge Schedule (MAKS) and Reported and Intended Behaviour Scale (RIBS). We used generalised estimating equations (GEE) to assess the impact of the intervention over time. RESULTS: Compared to baseline, there was a statistically significant increase in stigma related knowledge and behaviour immediately after the intervention (coefficient=3.8; 95% CI: 3.5,4.1) and during the 3-month (coefficient=3.4; 95% CI: 3.0,3.7) and 6-month (coefficient=2.4; 95% CI: 2.0,2.7) follow-up. CONCLUSION: Preliminary findings suggest that a single 90-minute MHL interactive session could lead to improvements in SRMHKB among youth in India. Future research might utilise randomised controlled trials to corroborate findings, and explore how improvements can be sustained over the longer-term.

Can we screen opportunistically for low bone mineral density using CT scans of the shoulder and artificial intelligence?

OBJECTIVE: To evaluate whether the CT attenuation of bones seen on shoulder CT scans could be used to predict low bone mineral density (BMD) (osteopenia/osteoporosis), and to compare the performance of two machine learning models to predict low BMD. METHODS: In this study, we evaluated 194 patients aged 50 years or greater (69.2 ± 9.1 years; 170 females) who underwent unenhanced shoulder CT scans and dual-energy X-ray absorptiometry within 1 year of each other between January 1, 2010, and December 31, 2021. The CT attenuation of the humerus, glenoid, coracoid, acromion, clavicle, first, second, and third ribs was obtained using 3D-Slicer. Support vector machines (SVMs) and k-nearest neighbours (kNN) were used to predict low BMD. DeLong test was used to compare the areas under the curve (AUCs). RESULTS: A CT attenuation of 195.4 Hounsfield Units of the clavicle had a sensitivity of 0.577, specificity of 0.781, and AUC of 0.701 to predict low BMD. In the test dataset, the SVM had sensitivity of 0.686, specificity of 1.00, and AUC of 0.857, while the kNN model had sensitivity of 0.966, specificity of 0.200, and AUC of 0.583. The SVM was superior to the CT attenuation of the clavicle (P = .003) but not better than the kNN model (P = .098). CONCLUSION: The CT attenuation of the clavicle was best for predicting low BMD; however, a multivariable SVM was superior for predicting low BMD. ADVANCES IN KNOWLEDGE: SVM utilizing the CT attenuations at many sites was best for predicting low BMD.

Enhancing the Permeate Flux Improvement of Direct Contact Membrane Distillation Modules with Inserted S-Ribs Carbon-Fiber Filaments.

Three widths of manufacturing S-ribs carbon-fiber filaments acting as turbulence promoters were implemented into the flow channel of direct contact membrane distillation (DCMD) modules to augment the permeate flux improvement in the present study. Attempts to reduce the disadvantageous temperature polarization effect were made by inserting S-ribs turbulence promoters in improving pure water productivity, in which both heat- and mass-transfer boundary layers were diminished due to creating vortices in the flow pattern and increasing turbulence intensity. The temperature polarization coefficient ttemp was studied and found to enhance device performance (less thermal resistance) under inserting various S-ribs carbon-fiber thicknesses and operating both cocurrent- and countercurrent-flow patterns. The permeate fluxes in the DCMD modules with inserted S-ribs carbon-fiber turbulence promoters were investigated theoretically by developing the mathematical modeling equations and were conducted experimentally with various design and operating parameters. The theoretical predictions and experimental results exhibited a great potential to considerably achieve permeate flux enhancement in the new design of the DCMD system. The DCMD module with inserted S-ribs carbon-fiber turbulence promoters in the flow channel could provide a relative permeate flux enhancement up to 37.77% under countercurrent-flow operations in comparisons with the module of using the empty channel. An economic consideration on both permeate flux enhancement and power consumption increment for the module with inserted S-ribs carbon-fiber filaments was also delineated.

Experimental Investigation of Load-Bearing Capacity in EN AW-2024-T3 Aluminum Alloy Sheets Strengthened by SPIF-Fabricated Stiffening Rib.

The aluminum strength-to-weight ratio has become a highly significant factor in industrial applications. Placing stiffening ribs along the surface can significantly improve the panel's resistance to bending and compression in aluminum alloys. This study used single-point incremental forming (SPIF) to fabricate stiffening ribs for 1 mm and 3 mm thick aluminum alloy EN AW-2024-T3 sheets. A universal compression machine was used to investigate sheet deformation. The resulting deformation was examined using non-contact digital image correlation (DIC) based on several high-resolution cameras. The results showed that deformation progressively escalated from the edges toward the center, and the highest buckling values were confined within the non-strengthened area. Specimens with a larger thickness (3 mm) showed better effectiveness against buckling and bending for each applied load: 8 kN or 10 kN. Additionally, the displacement from the sheet surface decreased by 60% for sheets 3 mm thick and by half for sheets 1 mm thick, which indicated that thicker sheets could resist deformation better.

Multi-Mode Damage and Fracture Mechanisms of Thin-Walled Tubular Parts with Cross Inner Ribs Manufactured via Flow Forming.

In order to study the multi-mode damage and fracture mechanisms of thin-walled tubular parts with cross inner ribs (longitudinal and transverse inner ribs, LTIRs), the Gurson-Tvergaard-Needleman (GTN) model was modified with a newly proposed stress state function. Thus, tension damage and shear damage were unified by the new stress state function, which was asymmetric with respect to stress triaxiality. Tension damage dominated the modification, which coupled with the shear damage variable, ensured the optimal prediction of fractures of thin-walled tubular parts with LTIRs by the modified GTN model. This included fractures occurring at the non-rib zone (NRZ), the longitudinal rib (LIR) and the interface between the transverse rib (TIR) and the NRZ. Among them, the stripping of material from the outer surface of the tubular part was mainly caused by the shearing of built-up material in front of the rollers under a large wall thickness reduction (ΔT). Shear and tension deformation were the causes of fractures occurring at the NRZ, while axial tension under a large TIR interval (l) mainly resulted in fractures on LIRs. Fractures at the interface between the TIR and NRZ were due to the shearing applied by rib grooves and radial tension during the formation of ribs. This study can provide guidance for the manufacturing of high-performance aluminum alloy thin-walled tubular components with complex inner ribs.

Sternal tail: A new entity; A case report.

INTRODUCTION AND IMPORTANCE: Supernumerary ribs are very rare. They may occur at any level of the spine. We present here a case of an unusual localization of an extra rib that has not been previously described in the literature. CASE PRESENTATION: A 4-year-old girl, with no medical history, presented with a congenital deformity in the sternal region mimicking a tail. The tail-like structure had a bony axis and was covered by normal skin and hairs. A computed tomography of the chest demonstrated that this structure was an abnormal bone articulated with the the sternum. For cosmetic purposes, we have decided to resect the malformation. On histopathological examination, it was a supernumerary rib. CLINICAL DISCUSSION: A review of the literature reveals a global incidence of cervical ribs ranging from 0.04 % up to 4.5 %, intrathoracic ribs in about 50 cases to date and very few reports on supernumerary ribs in the lumbar and sacral region. We were unable to find any similar cases of supernumerary ribs in the sternum. CONCLUSION: Supernumerary ribs are rare and benign congenital anomalies. This case report describes an unusual localization of an extra rib in the sternum mimicking a tail.

Benign Hyperostosis of the Rib.

Teaching point: Benign hyperostosis of the rib is a benign entity consisting of a stress phenomenon that should not be confused with Paget, fibrous dysplasia, or osteoblastic metastasis.

Growth of the brachial nerve plexus with reference to topographical relation of the medianus nerve ansa with the thoracic wall and shoulder: a histologic study using human embryos and fetuses.

BACKGROUND: There is currently no information on positional changes in the brachial nerve plexus during prenatal growth. The subclavian-axillary artery passing through the medianus nerve ansa is considered a good landmark for evaluating the height of the plexus. MATERIALS AND METHODS: We used histologic sections from 9 embryos and 17 fetuses (approximately 6-15 weeks of gestational age) to identify the height of the ansa by referring to the level of the rib and the glenohumeral joint. RESULTS: The nerve ansa was usually (23 plexuses) observed at the level of the first and/or second ribs. However, it was sometimes observed above the first rib, at a distance equal to or more than an intercostal width (7 plexuses). In the latter group, the ansa was usually located below the glenohumeral joint. Thus, the joint was located higher than the first rib, although the upper extremities were in the anatomic position for all specimens. The left-right difference in the height of the plexus corresponded to or was less than the width of the first intercostal space. Despite the synchronized growth between the thorax and shoulder girdle, the brachial plexus showed a considerable variation in comparative height; the range corresponded to twice of an intercostal width. Whether the nerve plexus is located high or low is determined at an early developmental stage and is maintained during the later growth stages. CONCLUSION: The high-positioned plexus might cause nerve injury at delivery, followed by a glenohumeral joint deformity because of the fragility without fixation in the thorax.

The Sima de los Huesos thorax and lumbar spine: Selected traits and state-of-the-art.

Information on the evolution of the thorax and lumbar spine in the genus Homo is hampered by a limited fossil record due to the inherent fragility of vertebrae and ribs. Neandertals show significant metric and morphological differences in these two anatomical regions, when compared to Homo sapiens. Thus, the important fossil record from the Middle Pleistocene site of Sima de los Huesos (SH) not only offers important information on the evolution of these anatomical regions within the Neandertal lineage but also provides important clues to understand the evolution of these regions at the genus level. We present the current knowledge of the costal skeleton, and the thoracic and lumbar spine anatomy of the hominins found in Sima de los Huesos compared to that of Neandertals and modern humans. The current SH fossil record comprises 738 vertebral specimens representing a minimum of 70 cervical, 95 thoracic and 47 lumbar vertebrae, 652 rib fragments representing a minimum of 118 ribs, and 26 sternal fragments representing 4 sterna. The SH hominins exhibit a morphological pattern in their thorax and lumbar spine more similar to that of Neandertals than to that of H. sapiens, which is consistent with the phylogenetic position of these hominins. However, there are some differences between the SH hominins and Neandertals in these anatomical regions, primarily in the orientation of the lumbar transverse processes and in the robusticity of the second ribs. The presence of some but not all of the suite of Neandertal-derived features is consistent with the pattern found in the cranium and other postcranial regions of this population.

Natural Frequencies of Diatom Shells: Alteration of Eigenfrequencies Using Structural Patterns Inspired by Diatoms.

Diatoms have delicate and complex shells showing different lightweight design principles that have already been applied to technical products improving the mechanical properties. In addition, diatom inspired structures are expected to significantly affect the vibration characteristics, i.e., the eigenfrequencies. Directed eigenfrequency shifts are of great interest for many technical applications to prevent undesired high vibration amplitudes. Therefore, numerous complex diatom inspired dome structures primarily based on combs, ribs, and bulging patterns were constructed and their eigenfrequencies were numerically studied. Different structural patterns were identified to significantly affect eigenfrequencies. The results were compared to dome structures equipped with rib patterns in combination with a common structural optimization tool. The study indicates that a combination of (1) selecting diatom inspired structural patterns that strongly affect eigenfrequencies, and (2) adapting them to the boundary conditions of the technical problem is an efficient method to design diatom inspired lightweight solutions with high eigenfrequencies.

Instrumentation failure following pediatric spine deformity growth-sparing surgery using traditional growing rods or vertical expandable prosthetic titanium ribs.

BACKGROUND: Instrumentation failure (IF) is a major complication associated with growth-sparing surgery for pediatric spinal deformities; however, studies focusing on IF following each surgical procedure are lacking. We aimed to evaluate the incidence, timing, and rates of unplanned return to the operating room (UPROR) associated with IF following each surgical procedure in growth-sparing surgeries using traditional growing rods (TGRs) and vertical expandable prosthetic titanium ribs (VEPTRs). METHODS: We reviewed 1,139 surgical procedures documented in a Japanese multicenter database from 2015 to 2017. Of these, 544 TGR and 455 VEPTR procedures were included for evaluation on a per-surgery basis. IF was defined as the occurrence of an implant-related complication requiring revision surgery. RESULTS: The surgery-based incidences of IF requiring revision surgery in the TGR and VEPTR groups were 4.3% and 4.0%, respectively, with no significant intergroup difference. Remarkably, there was a negative correlation between IF incidence per surgical procedure and the number of lengthening surgeries in both groups. In addition, rod breakage in the TGR group and anchor-related complications in the VEPTR group tended to occur relatively early in the treatment course. The surgery-based rates of UPROR due to IF in the TGR and VEPTR groups were 2.0% and 1.5%, respectively, showing no statistically significant difference. CONCLUSIONS: We found that IF, such as anchor related-complications and rod breakage, occurs more frequently earlier in the course of lengthening surgeries. This finding may help in patient counseling and highlights the importance of close postoperative follow-up to detect IF and improve outcomes.

Reconstruction surgery using polypropylene mesh after extensive resection of a costal osteosarcoma in a dog.

Osteosarcoma is the most common tumour that develops in the chest wall of dogs; an extensive excision is the treatment of choice. Various methods have been reported for reconstruction of chest wall defects following extensive excision. The objective of this report was to describe the complete resection of an extensive costal osteosarcoma with an extended resection of the ribs and part of the diaphragm in a dog. An 11-year-old neutered, male, miniature pinscher was presented with dyspnoea: An extensive mass was observed, stretching from the right chest wall to the abdominal wall. On computed tomography, the mass originated from the right 9th rib and exceeded the 6th rib on the cranial side and the 13th rib on the caudal side; it was compressing the lungs, diaphragm, liver, stomach and duodenum. When the patient's condition was medically stabilized, the tumour was removed from the right 9th rib. In consideration of the surgical margin, the 5th-13th ribs were excised, and the tumour was resected with the thoracoabdominal wall and part of the diaphragm. The missing thoracoabdominal wall and section of the diaphragm were reconstructed using two sheets of a polypropylene mesh. Postoperatively, flail chest was observed, although dyspnoea was not observed in the patient. Histopathological examination confirmed the diagnosis of osteosarcoma with a clean margin. Although 60.6 months have passed post-surgery, no metastasis has reoccurred. In this case, complete resection and reconstruction of the chest wall and diaphragm were achieved using a polypropylene mesh without fatal postoperative complications, despite extensive osteosarcoma resection.

How to make a digital reconstruction of the human ribcage.

Up to now, there have been no publication standardizing the digital reconstruction of the modern human ribcage from commingled costo-vertebral material. Consequently, we designed a validated protocol based on anatomical features observed in the literature and the CT scanned ribcages of 10 adult European individuals. After quantifying the shape of these ribcages using 3D geometric morphometrics, we split each vertebra and rib within their corresponding (semi)landmarks. Subsequently, individual bones + (semi)landmarks were imported to LhpFusionBox, commingled and 3D reconstructed. To validate the accuracy of the protocol, we first reconstructed a randomly chosen ribcage three times and then compared these reconstructions to the rest of the sample. Since these reconstructions were closer to their original counterpart than to the others, the remaining sample was reconstructed once. Next, we tested the intra-observer error during reconstructing using the Procrustes distances among the original ribcages and the reconstructions. We observed that first each ribcage reconstruction was clustered to its original counterpart and second there was a learning curve showing an improvement in the reconstruction process over time. Subsequently, we explored general size and shape differences among the original and reconstructed ribcages through a study of centroid size and a permutation test on the Procrustes distances (10,000 permutations), respectively. Specific shape differences between both groups were further examined through a principal component analysis in shape space. None of these analyses found statistical differences between the original and reconstructed ribcages (p > 0.05). Eventually, we extracted the mean shapes of the original ribcages and the reconstructions in order to visualize potential deviations caused by the anatomical considerations of the researcher. These results demonstrate that the protocol is accurate enough to be used when reconstructing a disarticulated human ribcage.

The therapeutic value of vacuum external fixation in polytrauma patients with multiple ribs fracture.

BACKGROUND: Multiple displaced rib fractures often result in a poor prognosis. Open reduction and internal fixation has been shown to provide benefits for patients with displaced rib fractures and flail chest. Nevertheless, for patients who are unwilling or unsuitable for surgery, the therapeutic options are limited. We developed a novel plastic vacuum device for rib fractures external stabilization. This study aims to compare the therapeutic efficacy of this device against a traditional chest strap in polytrauma patients with multiple rib fractures. METHODS: A retrospective investigation was conducted on polytrauma patients with multiple rib fractures admitted to our trauma center between March 2020 and March 2023. Patients were categorized into two groups: vacuum external fixation and chest strap. Comparative analysis was conducted on baseline parameters, injury characteristics, and clinical outcomes between the two groups. RESULTS: In this study, 54 patients were included, with 28 receiving chest strap and 26 undergoing vacuum external fixation. Results showed that, at 3 days and 7 days postintervention, the vacuum external fixation group had significantly lower visual analog scale scores during deep breathing and coughing (P < .05). Vacuum external fixation also reduced pleural drainage duration and volume, as well as lowered the risk of pneumonia and other complications (P < .05). Furthermore, the vacuum external fixation group demonstrated notable improvements in vital capacity, tidal volume, blood-gas test results, and a shorter hospital length of stay. CONCLUSIONS: According to the study findings, vacuum external fixation appears to offer benefits to patients with multiple rib fractures, potentially reducing the risk of complications and improving overall clinical outcomes.

Population trends in human rib cross-sectional shapes.

Rib fractures remain the most frequent thoracic injury in motor vehicle crashes. Computational human body models (HBMs) can be used to simulate these injuries and design mitigation strategies, but they require adequately detailed geometry to replicate such fractures. Due to a lack of rib cross-sectional shape data availability, most commercial HBMs use highly simplified rib sections extracted from a single individual during original HBM development. This study provides human rib shape data collected from chest CT scans of 240 females and males across the full adult age range. A cortical bone mapping algorithm extracted cross-sectional geometry from scans in terms of local periosteal position with respect to the central rib axis and local cortex thickness. Principal component analysis was used to reduce the dimensionality of these cross-sectional shape data. Linear regression found significant associations between principal component scores and subject demographics (sex, age, height, and weight) at all rib levels, and predicted scores were used to explore the expected rib cross-sectional shapes across a wide range of subject demographics. The resulting detailed rib cross-sectional shapes were quantified in terms of their total cross-sectional area and their cortical bone cross-sectional area. Average-sized female ribs were smaller in total cross-sectional area than average-sized male ribs by between 20% and 36% across the rib cage, with the greatest differences seen in the central portions of rib 6. This trend persisted although to smaller differences of 14%-29% when comparing females and males of equal intermediate weight and stature. Cortical bone cross-sectional areas were up to 18% smaller in females than males of equivalent height and weight but also reached parity in certain regions of the rib cage. Increased age from 25 to 80 years was associated with reductions in cortical bone cross-sectional area (up to 37% in females and 26% in males at mid-rib levels). Total cross-sectional area was also seen to reduce with age in females but to a lesser degree (of up to 17% in mid-rib regions). Similar regions saw marginal increases in total cross-sectional area for male ribs, indicating age affects rib cortex thickness moreso than overall rib cross-sectional size. Increased subject height was associated with increased rib total and cortical bone cross-sectional areas by approximately 25% and 15% increases, respectively, in mid-rib sections for a given 30 cm increase in height, although the magnitudes of these associations varied by sex and rib location. Increased weight was associated with approximately equal changes in both cortical bone and total cross-sectional areas in males. These effects were most prominent (around 25% increases for an addition of 50 kg) toward lower ribs in the rib cage and had only modest effects (less than 12% change) in ribs 2-4. Females saw greater increases with weight in total rib area compared to cortical bone area, of up to 21% at the eighth rib level. Results from this study show the expected shapes of rib cross-sections across the adult rib cage and across a broad range of demographics. This detailed geometry can be used to produce accurate rib models representing widely varying populations.

Consideration of the thoracic phenotype of cerebro-costo-mandibular syndrome.

Cerebro-costo-mandibular syndrome (CCMS) is a congenital condition with skeletal and orofacial abnormalities that often results in respiratory distress in neonates. The three main phenotypes in the thorax are posterior rib gaps, abnormal costovertebral articulation and absent ribs. Although the condition can be lethal, accurate diagnosis, and subsequent management help improve the survival rate. Mutations in the causative gene SNRPB have been identified, however, the mechanism whereby the skeletal phenotypes affect respiratory function is not well-studied due to the multiple skeletal phenotypes, lack of anatomy-based studies into the condition and rarity of CCMS cases. This review aims to clarify the extent to which the three main skeletal phenotypes in the thorax contribute to respiratory distress in neonates with CCMS. Despite the posterior rib gaps being unique to this condition and visually striking on radiographic images, anatomical consideration, and meta-analyses suggested that they might not be the significant factor in causing respiratory distress in neonates. Rather, the increase in chest wall compliance due to the rib gaps and the decrease in compliance at the costovertebral complex was considered to result in an equilibrium, minimizing the impact of these abnormalities. The absence of floating ribs is likely insignificant as seen in the general population; however, a further absence of ribs or vestigial rib formation is associated with respiratory distress and increased lethality. Based on these, we propose to evaluate the number of absent or vestigial ribs as a priority indicator to develop a personalized treatment plan based on the phenotypes exhibited.

Bone metastases from chondroblastoma: a rare pattern of metastatic disease in an adult.

Chondroblastoma is a rare benign tumor, typically presenting in the first two decades. Systemic metastases in chondroblastoma are extremely rare and it is the rarity of these metastases which lead the World Health Organisation to re-classify this lesion from "intermediate" to "benign" in its updated classification of bone tumors in 2020. We present an unusual case of a 55 year-old male patient who presented with multiple FDG-avid bone lesions on a background of conventional chondroblastoma of the rib excised at another institution 11-years previously. Two of these lesions were also histologically-proven as conventional chondroblastoma at biopsy. This case highlights that, although rare, metastases can be seen in patients with chondroblastoma. To our knowledge, this is the only case with an unusual pattern of metastases limited to bone.

Diagnostic Accuracy for Acute Rib Fractures: A Cross-sectional Study Utilizing Automatic Rib Unfolding and 3D Volume-Rendered Reformation.

RATIONALE AND OBJECTIVES: The aim of this study was to compare the use of computed tomography (CT) with automatic rib unfolding and three-dimensional (3D) volume-rendered imaging in the detection and characterization of rib fractures and flail chest. MATERIALS AND METHODS: A total of 130 patients with blunt chest trauma underwent whole-body CT, and five independent readers assessed the presence and characterization of rib fractures using traditional CT images, automatic rib unfolding, and 3D volume-rendered images in separate readout sessions at least 2 weeks apart. A gold standard was established by consensus among the readers based on the combined analysis of conventional and reformatted images. RESULTS: Automatic rib unfolding significantly reduced mean reading time by 47.5%-74.9% (P < 0.0001) while maintaining a comparable diagnostic performance for rib fractures (positive predictive value [PPV] of 82.1%-93.5%, negative predictive value [NPV] of 96.8%-98.2%, and 69.4%-94.2% and 96.9%-99.1% for conventional axial images and 70.4%-85.1% and 95.2%-96.6% for 3D images) and better interobserver agreement (kappa of 0.74-0.87). For flail chest, automatic rib unfolding showed a PPV of 85.7%-100%, NPV of 90.4%-99.0%, and 80.0%-100% and 89.7%-100% for conventional axial images and 76.9%-100% and 89.0%-92.1% for 3D images. CONCLUSION: Automatic rib unfolding demonstrated equivalent diagnostic performance to conventional images in detecting acute rib fractures and flail chest, with good interobserver agreement and time-saving benefits.