Boosting the Efficiency of Red Thermally Activated Delayed Fluorescence via Conjugation Enhancement in Push-Pull Naphthalimide Derivatives.

In this work, we synthesize a series of push-pull compounds bearing naphthalimide as the electron acceptor and tetraphenylethylene (TPE)/triphenylamine (TPA)/phenothiazine (PTZ) as the electron rich/electron donor units. These moieties are arranged in highly conjugated quadrupolar structures. The structure-property relationships are investigated through a joint experimental time-resolved spectroscopic and computational TD-DFT study. The femtosecond transient absorption and fluorescence up-conversion experiments reveal ultrafast photoinduced intramolecular charge transfer. This is likely the key factor leading to efficient spin-orbit CT-induced intersystem crossing for the TPA- and PTZ-derivatives as well as to small singlet-to-triplet energy gap. Consequently, evidence for a delayed fluorescence component is found together with the main prompt emission in the fluorescence kinetics both in solution and in thin film. The weight of the Thermally Activated Delayed Fluorescence (TADF) is greatly enhanced when these fluorophores are used as guests in solid-state host matrices. TADF is interestingly revealed in the orange-red region of the visible. Such long wavelength emission is here observed with surprisingly large fluorescence quantum yields, thanks to the conjugation enhancement achieved in these newly synthesized structures relative to previous studies. Our findings may be thus promising for the future development of efficient third generation TADF-based OLEDs.

Revisited UV- spectra of chlorohydroxoaurate anions.

The most important ionic precursor of gold, [AuCl4]-, is used in aqueous solution leading to chlorohydroxoaurates species, [AuCl4-x(OH)x]- (x = 1-4) due to partial hydrolysis. Their UV spectral signatures are still relatively unknown though very useful in many domains of application. Individual spectra of each of them are determined for the first time thanks to a thorough experimental investigation comprising the range 200-250 nm, surpringly ignored up to now. New isosbestic points useful for species partition analysis are evidenced. Electronic transition attribution is obtained from quantum chemical calculations based on TD-DFT. The prediction of the experimental blueshifted bands of the [AuCl4-x(OH)x]-1 anions was possible only after applying energy corrections calibrated on the full UV range two-band spectrum of the [AuCl4]- complex.

Enhancing the antioxidant potential of ESIPT-based naringenin flavonoids based on excited state hydrogen bond dynamics: A theoretical study.

Exploring antioxidant potential of flavonoid derivatives after ESIPT process provides a theoretical basis for discovering compounds with higher antioxidant capacity. In this work, employing the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods, the antioxidant potential of two citrus-derived naringenin flavonoids after ESIPT process is explored. Based on studies of ESIPT process including IMHB intensity variations, potential energy curves, and transition state, these molecules exist only in enol and keto⁎ forms due to ultra-fast ESIPT. The HOMOs are utilized to explore electron-donating capacity, demonstrating that the molecules in keto⁎ form is stronger than that in enol form. Furthermore, the atomic dipole moment corrected Hirshfeld population (ADCH) and Fukui functions indicate that the sites attacked by the electrophilic free radical of the two molecules in the keto⁎ form are O3 and O5' respectively, and both are more active than in the enol form. Overall, a comprehensive consideration of the ESIPT process and antioxidant potential of flavonoid derivatives will facilitate the exploration and design of substances with higher antioxidant capacity.

Orthogonal Geometry Enhancing the Intersystem Crossing and Photosensitive Efficiency of Spiro Organoboron Compounds.

Based on the reported spiro organoboron compounds (PS1 and PS2 as potent 1O2 sensitizers), several new organoboron molecules (PS4-PS9) were constructed through structural modification, and their low-lying excited states and photophysical properties have been explored by density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations. The predicted effective intersystem crossing (ISC) processes arise from the S1→T2 transition for PS4-PS6 and the S1→T4 transition for PS1, and corresponding KISC rate constants reach the order of magnitude of 109 (s-1). The organoboron compounds with a (N, N) chelate acceptor are predicted to exhibit relatively higher ISC efficiency than those bearing a (N, O) acceptor, and the planar C3NBN ring and the orthogonal configuration between the donor and acceptor moieties are responsible for the ISC rate enhancement. Importantly, the geometric features of the lowest singlet excited state (S1) for these compounds play a decisive role in their photosensitive efficiency. The present results provide a basis for better understanding of the photosensitivity of these spiro organoboron compounds and the structural modification effect.

Induced Chirality in Sulfasalazine by Complexation With Albumins: Theoretical and Experimental Study.

Through molecular recognition, drugs can interact and complex with macromolecules circulating in the body. The serum albumin transport protein, found in several mammals, has several interaction sites where these molecules can be located. The drug sulfasalazine (SSZ) is known in the literature to complex at drug site 1 (DS1) in human serum (HSA) and bovine serum (BSA) proteins. This complexation can be studied using various spectroscopic techniques. With the techniques used in this work, absorption in the ultraviolet and visible regions (UV-Vis) and electronic circular dichroism (ECD), a significant difference was observed in the results involving HSA and BSA. The application of theoretical methodologies, such as TD-DFT and molecular docking, suggests that the conformation that SSZ assumes in DS1 of the two proteins is different, which exposes it to different amino acid residues and different hydrophobicities. This difference in conformation may be related to the location of DS1 where the drug interacts or to the possibility of SSZ moving in the BSA site, due to its larger size, and moving less freely in HSA.

Quantum Computational and Spectroscopic Investigation of 3-aminosalicylic Acid.

Quantum chemical calculations of 3-aminosalicylic acid (3ASA) (monomer and dimer forms) have been performed using DFT and TD-DFT theories with B3LYP/6-311 G(d,p) functional level in the ground and excited states. Using TD-DFT with IEF-PCM model, the electronic spectra of 3ASA in solvents were computed and correlated with the experimental data. The theoretically calculated absorption and emission maxima of 3ASA (monomer) are observed in the range of 343 - 347 nm (S0 → S1 transition) and 429 - 448 nm (S1 → S0 transition), respectively. The natural bond orbital (NBO) analysis shows that charge transfer interaction contributes significantly to stabilize the molecular system. In the case of dimer, hydrogen bonding plays a dominant role in stabilizing the molecular framework. Additionally, the obtained nonlinear optical (NLO) properties: polarizability (13.86 × 10-24 e.s.u for monomer and 29.46 × 10-24 e.s.u. for dimer), first-order hyperpolarizability (4.21 × 10-30 e.s.u for monomer and 0.18 × 10-30 e.s.u for dimer) and second-order hyperpolarizability (7.44 × 10-36 e.s.u. for monomer and 14.32 × 10-36 e.s.u. for dimer) were found to be larger than those of standard organic compounds suggesting that 3ASA has a significant NLO character for optoelectronic applications. The NLO properties of dimer may differ from monomer due to dimerization. Further, the radiative lifetime, light harvesting efficiency and band gap energy were calculated, and proposed that 3ASA may be useful in photovoltaics and wide bandgap power devices. HIGHLIGHTS: • DFT and TD-DFT theories were employed to calculate structural and molecular properties of 3ASA (monomer and dimer) in ground and excited states. • HOMO-LUMO study shows monomer and dimer of 3ASA are good reactive. • NBO analysis reflects that charge transfer interactions stabilized the 3ASA molecule. • Electronic absorption/emission spectra in solvents calculated by IEF-PCM/TD-DFT method correlate with experimental results. • Calculated NLO parameters suggested that 3ASA is a potential candidate for NLO material.

Unraveling the structure-property relationship of novel thiophene and furan-fused cyclopentadienyl chromophores for nonlinear optical applications.

Development of organic nonlinear optical materials has become progressively more important due to their emerging applications in new-generation photonic devices. A novel series of chromophores based on innovative thiophene and furan-fused cyclopentadienyl bridge with various powerful donor and acceptor moieties were designed and theoretically investigated for applications in nonlinear optics. To unravel the structure-property relationship between this new push-pull conjugated systems and their nonlinear optical property, multiple methods, including density of states analysis, coupled perturbed Kohn-Sham (CPKS) method, sum-over-states (SOS) model, the two-level model (TSM), hyperpolarizability density analysis, and the (hyper)polarizability contribution decomposition, were performed to comprehensively investigated the nonlinear optical and electronic properties of this new π-system. Due to excellent charge transfer ability of new bridge and distinctive structure of donor and acceptor, the designed chromophores exhibit deep HOMO levels, low excitation energy, high dipole moment difference and large hyperpolarizability, indicating the appealing air-stable property and remarkable electrooptic performance of them. Importantly, THQ-CS-A3 and PA-CS-A3 shows outstanding NLO response properties with ßtot value of 6953.9 × 10-30 and 5066.0 × 10-30 esu in AN, respectively. The influence of the push-pull strength, the heterocycle and the π-conjugation of new bridge on the nonlinear optical properties of this novel powerful systems are clarified. This new series of chromophores exhibit remarkable electro-optical Pockels and optical rectification effect. More interestingly, PA-CS-A3 and THQ-CS-A2 also show appealing SHG effect. This study will help people understand the nature of nonlinear optical properties of innovative heteroarene-fused based cyclopentadienyl chromophores and offer guidance for the rational design of chromophores with outstanding electrooptic (EO) performance in the future.

The Effect of Conjugated Nitrile Structures as Acceptor Moieties on the Photovoltaic Properties of Dye-Sensitized Solar Cells: DFT and TD-DFT Investigation.

A major challenge in improving the overall efficiency of dye-sensitized solar cells is improving the optoelectronic properties of small molecule acceptors. This work primarily investigated the effects of conjugation in nitriles incorporated as acceptor moieties into a newly designed series of D-A-A dyes. Density functional theory was employed to specifically study how single-double and single-triple conjugation in nitriles alters the optical and electronic properties of these dyes. The Cy-4c dye with a highly conjugated nitrile unit attained the smallest band gap (1.80 eV), even smaller than that of the strong cyanacrylic anchor group (2.07 eV). The dyes lacking conjugation in nitrile groups did not contribute to the LUMO, while LUMOs extended from donors to conjugated nitrile components, facilitating intramolecular charge transfer and causing a strong bind to the film surface. Density of state analysis revealed a considerable impact of conjugated nitrile on the electronic properties of dyes through an effective contribution in the LUMO, exceeding the role of the well-known strong 2,1,3-benzothiadiazole acceptor unit. The excited state properties and the absorption spectra were investigated using time-dependent density functional theory (TD-DFT). Conjugation in the nitrile unit caused the absorption band to broaden, strengthen, and shift toward the near-infrared region. The proposed dyes also showed optimum photovoltaic properties; all dyes possess high light-harvesting efficiency (LHE) values, specifically 96% for the dyes Cy-3b and Cy-4c, which had the most conjugated nitrile moieties. The dyes with higher degrees of conjugation had longer excitation lifetime values, which promote charge transfer by causing steady charge recombination at the interface. These findings may provide new insights into the structure of conjugated nitriles and their function as acceptor moieties in DSSCS, which may lead to the development of extremely effective photosensitizers for solar cells.

Remarkable enhancement of the nonlinear optical behavior towards asymmetric substituted D-π-A dithiophene-based compounds.

CONTEXT: Nonlinear optics (NLO) is an interesting field that discloses the interaction between intense light and matter, leading to a deeper understanding of NLO phenomena. Organic chromophores are considered as promising materials for NLO due to their exceptional structural versatility, ease of processing, and rapid response to NLO effects. Functional materials based on thiophene have been indispensable in advancing organic optoelectronics. Specifically, dithiophene-based compounds display weaker aromaticity, reduced steric hindrance, and additional sulfur-sulfur interactions. Hence, by utilizing dithieno[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene (DTBDT) as the core structure, designing of a set of organic compounds with D1-π-D2-π-A-type framework, namely ZR1D1-ZR1D8, was carried out in this study. The analysis of frontier molecular orbitals (FMOs) revealed that compound ZR1D2 has the lowest band gap of 1.922 eV among all the investigated chromophores. The correlation of global reactivity parameters (GRPs) with the band gap values indicates that ZR1D2 displays a hardness of 0.961 eV and a softness of 0.520 eV-1. Among the studied compounds, ZR1D2 demonstrated a broad absorption spectrum that extended across the visible region. The maximum absorption wavelengths were observed at 766.470 nm for ZR1D2 and 749.783 nm for ZR1D5. These DTBDT-based dyes exhibit a remarkable NLO response with exceptionally high first hyperpolarizability (ßtot) values. Among them, compound ZR1D2 stands out with the highest average linear polarizability (⟨α⟩ = 3.0 × 10-22 esu), first hyperpolarizability (ßtot = 4.1 × 10-27 esu), and second hyperpolarizability (γtot = 7.5 × 10-32 esu) values. In summary, this investigation offers valuable insights into the potential use of DTBDT-based organic chromophores, particularly ZR1D2, for advanced applications in NLO. These findings suggest promising opportunities for researchers to synthesize these molecules and utilize these compounds in hi-tech NLO-based applications. METHODOLOGY: The density functional theory computations were performed at the M06/6-311G(d,p) functional to explore their structural effects on electronic and NLO findings. Various analyses like highest occupied molecular orbital-lowest unoccupied molecular orbital energy gaps, absorption maxima, density of states, open circuit voltage, binding energies of electrons and holes, and transition density matrix are employed to investigate photovoltaic efficiencies of the derivatives. Different software packages like Avogadro, Multiwfn, Origin, GaussSum, PyMOlyze, and Chemcraft were used to deduce conclusions from the output files.

Mechanisms of glycine formation in cold interstellar media: a theoretical study.

The possibility of the formation of glycine (Gly) from fundamental gas molecules in cold interstellar media was studied using quantum chemical methods, transition state theory and microcanonical molecular dynamics simulations with surface hopping dynamics (NVE-MDSH). This theoretical study emphasized five photochemical pathways in the lowest singlet-excited (S 1) state, thermochemical processes after non-radiative S 1→S 0 relaxations, and photo-to-thermal energy conversion in the NVE ensemble. The optimized reaction pathways suggested that to generate a reactive singlet dihydroxy carbene (HOCOH) intermediate, photochemical pathways involving the H2O…CO van der Waals and H2O-OC hydrogen bond precursors (Ch (1)_Step (1)) possess considerably lower energy barriers than the S 0 state pathways. The Gibbs free energy barriers (∆G ǂ ) calculated after the non-radiative S 1 →S 0 relaxations indicated higher spontaneous temperatures (T s) for the formation of the HOCOH intermediate (Ch (1)_Step (1)) than for Gly formation (Ch (1)_Step (2) and Ch (4)). Although the termolecular reaction in Ch (4) possesses a low energy barrier, and is thermodynamically favourable, the high exothermic S 1 →S 0 relaxation energy leads to the separation of the weakly associated H2O…CH2NH…CO complex into single molecules. The NVE-MDSH results also confirmed that the molecular processes after the S 1 →S 0 relaxations are thermally selective, and because the non-radiative S 1 →S 0 relaxation temperatures are exceedingly higher than T s, the formation of Gly on consecutive reaction pathways is non-synergistic with low yields and several side products. Based on the theoretical results, photo-to-thermal control strategies to promote desirable photochemical products are proposed. They could be used as guidelines for future theoretical and experimental research on photochemical reactions.

Computer-aided drug design supporting sunscreen research: a showcase study using previously synthesized hybrid UV filter-antioxidant compounds.

CONTEXT: Although quantum mechanical calculations have proven effective in accurately predicting UV absorption and assessing the antioxidant potential of compounds, the utilization of computer-aided drug design (CADD) to support sustainable synthesis research of new sunscreen active ingredients remains an area with limited exploration. Furthermore, there are ongoing concerns about the safety and effectiveness of existing sunscreens. Therefore, it remains crucial to investigate photoprotection mechanisms and develop enhanced strategies for mitigating the harmful effects of UVR exposure, improving both the safety and efficacy of sunscreen products. A previous study conducted synthesis research on eight novel hybrid compounds (I-VIII) for use in sunscreen products by molecular hybridization of trans-resveratrol (RESV), avobenzone (AVO), and octinoxate (OMC). Herein, time-dependent density functional theory (TD-DFT) calculations performed in the gas phase on the isolated hybrid compounds (I-VIII) proved to reproduce the experimental UV absorption. Resveratrol-avobenzone structure-based hybrids (I-IV) present absorption maxima in the UVB range with slight differences between them, while resveratrol-OMC structure-based hybrids (V-VIII) showed main absorption in the UVA range. Among RESV-OMC hybrids, compounds V and VI exhibited higher UV absorption intensity, and compound VIII stood out for its broad-spectrum coverage in our simulations. Furthermore, both in silico and in vitro analyses revealed that compounds VII and VIII exhibited the highest antioxidant activity, with compound I emerging as the most reactive antioxidant within RESV-AVO hybrids. The study suggests a preference for the hydrogen atom transfer (HAT) mechanism over single-electron transfer followed by proton transfer (SET-PT) in the gas phase. With a strong focus on sustainability, this approach reduces costs and minimizes effluent production in synthesis research, promoting the eco-friendly development of new sunscreen active ingredients. METHODS: The SPARTAN'20 program was utilized for the geometry optimization and energy calculations of all compounds. Conformer distribution analysis was performed using the Merck molecular force field 94 (MMFF94), and geometry optimization was carried out using the parametric method 6 (PM6) followed by density functional theory (DFT/B3LYP/6-31G(d)). The antioxidant behavior of the hybrid compounds (I-VIII) was determined using the highest occupied molecular orbital (εHOMO) and the lowest unoccupied molecular orbital (εLUMO) energies, as well as the bond dissociation enthalpy (BDE), ionization potential (IP), and proton dissociation enthalpy (PDE) values, all calculated at the same level of structural optimization. TD-DFT study is carried out to calculate the excitation energy using the B3LYP functional with the 6-31G(d) basis set. The calculated transitions were convoluted with a Gaussian profile using the Gabedit program.

Experimental and theoretical aspects of magnetic circular dichroism and magnetic circularly polarized luminescence in the UV, visible and IR ranges: A review.

A historical sketch of the MCD (magnetic circular dichroism) spectroscopy is reported in its experimental and theoretical aspects. MCPL (magnetic circularly polarized luminescence) is also considered. The main studies are presented encompassing porphyrinoid systems, aggregates and materials, as well as simple organic molecules useful for the advancement of the interpretation. The MCD of chiral systems is discussed with special attention to new studies of natural products with potential pharmaceutical valence, including Amaryllidaceae alkaloids and related isocarbostyrils. Finally, the vibrational form of MCD, called MVCD, which is recorded in the IR part of the spectrum is also discussed. A final brief note on perspectives is given.

DFT and TD-DFT Investigations for the Limitations of Lengthening the Polyene Bridge between N,N-dimethylanilino Donor and Dicyanovinyl Acceptor Molecules as a D-π-A Dye-Sensitized Solar Cell.

One useful technique for increasing the efficiency of organic dye-sensitized solar cells (DSSCs) is to extend the π-conjugated bridges between the donor (D) and the acceptor (A) units. The present study used the DFT and TD-DFT techniques to investigate the effect of lengthening the polyene bridge between the donor N, N-dimethyl-anilino and the acceptor dicyanovinyl. The results of the calculated key properties were not all in line with expectations. Planar structure was associated with increasing the π-conjugation linker, implying efficient electron transfer from the donor to the acceptor. A smaller energy gap, greater oscillator strength values, and red-shifted electronic absorption were also observed when the number of polyene units was increased. However, some results indicated that the potential of the stated dyes to operate as effective dye-sensitized solar cells is limited when the polyene bridge is extended. Increasing the polyene units causes the HOMO level to rise until it exceeds the redox potential of the electrolyte, which delays regeneration and impedes the electron transport cycle from being completed. As the number of conjugated units increases, the terminal lobes of HOMO and LUMO continue to shrink, which affects the ease of intramolecular charge transfer within the dyes. Smaller polyene chain lengths yielded the most favorable results when evaluating the efficiency of electron injection and regeneration. This means that the charge transfer mechanism between the conduction band of the semiconductor and the electrolyte is not improved by extending the polyene bridge. The open circuit voltage (VOC) was reduced from 1.23 to 0.70 V. Similarly, the excited-state duration (τ) decreased from 1.71 to 1.23 ns as the number of polyene units increased from n = 1 to n = 10. These findings are incompatible with the power conversion efficiency requirements of DSSCs. Therefore, the elongation of the polyene bridge in such D-π-A configurations rules out its application in solar cell devices.

Effect of different substituent on the ESIPT process and fluorescence features of 2-(2-hydroxyphenyl)benzoxazole derivatives: A DFT/TD-DFT study.

In this contribution, four derivatives of 5'-(para-R-Phenylene) vinyl-2-(2'-hydroxyphenyl) benzoxazole (PVHBO) were ingeniously designed by introducing two electron-withdrawing substituents and two electron-donating substituents, aiming to investigate the influence of different substituents on the photophysical properties of PVHBO and the excited state intramolecular proton transfer (ESIPT) process via the density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. By utilizing the geometric parameters and the simulated infrared (IR) spectra, we compared the intramolecular hydrogen bonds (IHBs) strengths in the S0 and S1 states of the molecules. Via conducting the hole-electron analysis, the reduction in fluorescence intensity for the enol and keto forms of PVHBO, PVHBO-MeO, and PVHBO-NH2 were also well explicated. Besides, the potential energy curves (PECs) and corresponding transition state (TS) structures for both S0 and S1 states were also constructed to accurately obtain energy barriers of forward and reversed proton transfer processes. The calculated absorption and fluorescence spectra also show that PVHBO-NH2 has the largest Stokes shifts of 158 nm and 219 nm in both the enol and keto states, with a significant increase in fluorescence intensity observed upon the induction of electron-withdrawing groups. Through this work, it can provide the theoretical basis for the design of novel luminescent materials.

Tripodal BODIPY-Tagged and Functional Molecular Probes: Synthesis, Computational Investigations and Explorations by Multiphoton Fluorescence Lifetime Imaging Microscopy.

A range of novel BODIPY derivatives with a tripodal aromatic core was synthesized and characterized spectroscopically. These new fluorophores showed promising features as probes for in vitro assays in live cells and offer strategic routes for further functionalization towards hybrid nanomaterials. Incorporation of biotin tags facilitated proof-of-concept access to targeted bioconjugates as molecular probes. Computational explorations using DFT and TD-DFT calculations identified the most stable tripodal linker conformations and predicted their absorption and emission behavior. The uptake and speciation of these molecules in living prostate cancer cells was imaged by single- and two-photon excitation techniques coupled with two-photon fluorescence lifetime imaging (2P FLIM).

Synthesis and characterization of organoselenium based BODIPY and its application in living cells.

Phenylselenide based BODIPY probe was successfully synthesized and characterized by NMR spectroscopic techniques (1H, 13C and 77Se NMR), mass spectrometry and single crystal XRD. Surprisingly, crystal packing diagram of the probe showed formation of 1-D strip through intermolecular F---H interaction. The probe was screened with various Reactive Oxygen Species (ROS) and found to be selective for superoxide ion over other ROS via "turn-on" fluorescence response. The probe selectively and sensitively detects superoxide with a lower detection limit (43.34 nM) without interfering with other ROS. The quantum yield of the probe was found to increase from 0.091 % to 30.4 % (334-fold) after oxidation. Theoretical calculations (DFT and TD-DFT) were also performed to understand the sensing mechanism of the probe. The probe was able to effectively detect superoxide inside living cells without any toxic effect.

Insights into Halogen-Induced Changes in 4-Anilinoquinazoline EGFR Inhibitors: A Computational Spectroscopic Study.

The epidermal growth factor receptor (EGFR) is a pivotal target in cancer therapy due to its significance within the tyrosine kinase family. EGFR inhibitors like AG-1478 and PD153035, featuring a 4-anilinoquinazoline moiety, have garnered global attention for their potent therapeutic activities. While pre-clinical studies have highlighted the significant impact of halogen substitution at the C3'-anilino position on drug potency, the underlying mechanism remains unclear. This study investigates the influence of halogen substitution (X = H, F, Cl, Br, I) on the structure, properties, and spectroscopy of halogen-substituted 4-anilinoquinazoline tyrosine kinase inhibitors (TKIs) using time-dependent density functional methods (TD-DFT) with the B3LYP functional. Our calculations revealed that halogen substitution did not induce significant changes in the three-dimensional conformation of the TKIs but led to noticeable alterations in electronic properties, such as dipole moment and spatial extent, impacting interactions at the EGFR binding site. The UV-visible spectra show that more potent TKI-X compounds typically have shorter wavelengths, with bromine's peak wavelength at 326.71 nm and hydrogen, with the lowest IC50 nM, shifting its lambda max to 333.17 nm, indicating a correlation between potency and spectral characteristics. Further analysis of the four lowest-lying conformers of each TKI-X, along with their crystal structures from the EGFR database, confirms that the most potent conformer is often not the global minimum structure but one of the low-lying conformers. The more potent TKI-Cl and TKI-Br exhibit larger deviations (RMSD > 0.65 Å) from their global minimum structures compared to other TKI-X (RMSD < 0.15 Å), indicating that potency is associated with greater flexibility. Dipole moments of TKI-X correlate with drug potency (ln(IC50 nM)), with TKI-Cl and TKI-Br showing significantly higher dipole moments (>8.0 Debye) in both their global minimum and crystal structures. Additionally, optical spectral shifts correlate with potency, as TKI-Cl and TKI-Br exhibit blue shifts from their global minimum structures, in contrast to other TKI-X. This suggests that optical reporting can effectively probe drug potency and conformation changes.

In vitro α-glucosidase, docking and density functional theory studies on novel azide metal complexes.

Aim: The goal of this study is to synthesize new metal complexes containing N-methyl-1-(pyridin-2-yl)methanimine and azide ligands as α-glucosidase inhibitors for Type 2 diabetes. Materials & methods: The target complexes (12-16) were synthesized by reacting N-methyl-1-(pyridin-2-yl)methanimine (L1) with sodium azide in the presence of corresponding metal salts. The investigation of target protein interactions, vibrational, electronic and nonlinear optical properties for these complexes was performed by molecular docking and density functional theory studies. Results: Among these complexes, complex 13 (IC50 = 0.2802 ± 0.62 µM) containing Hg ion showed the highest α-glucosidase inhibitory property. On the other hand, significant results were detected for complexes containing Cu and Ag ions. Conclusion: Complex 13 may be an alternate anti-diabetic inhibitor according to in vitro/docking results.

[Box: see text].

How deprotonation of cohumulone and colupulone influence their UV/Vis and CD spectrum.

Cohumulone and colupulone are representatives of α- and ß-acids, respectively. These compounds are important antimicrobial hop (Humulus lupulus) constituents, where cohumulone is an important source of the bitter taste of beer. In this study, we examined the pH dependence of UV/Vis spectra of both compounds while CD spectra of cohumulone were also measured at various wavelengths. This facilitated the examination of the protolytic equilibrium of both compounds, where the second pKa value of cohumulone was determined for the first time. Additionally, comparing experimental spectra with spectra calculated using time-dependent density functional theory (TD-DFT) enabled the determination of the most likely deprotonation positions and corresponding species most likely present in the aqueous solution at various pH values. Last but not least, comparing calculated and experimental CD spectra of cohumulone facilitated the determination of the absolute stereoconfiguration of cohumulone.

Thiourea Functionalised Receptor for Selective Detection of Mercury Ions and its Application in Serum Sample.

A thiourea functionalised fluorescent probe 1-phenyl-3-(pyridin-4-yl)thiourea was synthesized and utilised as a fluorescent turn-on chemosensor for the selective recognition of Hg2+ ion over competitive metal ions including Na+, Mn2+, Li+, Cr2+, Ni2+, Ca2+, Cd2+, Mg2+, K+, Co2+, Cu2+, Zn2+, Al3+ and Fe2+ ions based on the inter-molecular charge transfer (ICT). Intriguingly, the receptor demonstrated unique sensing capabilities for Hg2+ in DMSO: H2O (10:90, v/v). The addition of Hg2+ ions to the sensor resulted in a blue shift in the absorption intensity and also enhancement in fluorescence intensity at 435 nm. Fluorescence emission intensity increased linearly with Hg2+ concentration ranging from 0 to 80 µL. The detection limit and binding constant were determined as 0.134 × 10-6 M and 1.733 × 107 M-1, respectively. The sensing behavior of Hg2+ was further examined using DLS, SEM and FTIR. The probe could detect Hg2+ ions across a wide pH range. Furthermore, the receptor L demonstrated good sensing performance for Hg2+ in bovine serum albumin and actual water samples.