Effectiveness of a natural coagulant based on common mallow (Malva sylvestris) in urban wastewater treatment.

This study evaluated the effectiveness of a natural coagulant based on common mallow (Malva sylvestris) to remove turbidity in urban wastewater. A 22 factorial design was selected to determine the optimal dose and the working pH of the natural coagulant. Its potential was studied in 50.0-450 mg/L and 4.00-10.0 ranges of doses and pH, respectively. A simplex lattice mixture evaluated its effectiveness as a coagulant aid combined with aluminum sulfate (conventional coagulant). Mixture proportions 0.000-1.00 were studied for each component, finding the proportion more effective. Results showed that the coagulation treatment could be feasible since a turbidity removal efficiency of 73.7% can be achieved under optimal conditions (50.0 mg/L and pH of 10.0). Likewise, a turbidity removal of 58.9% is obtained using 250 mg/L and maintaining wastewater pH (7.45). This efficiency can be increased using 31.0% natural coagulant mixed with 69.0% aluminum sulfate at 250 mg/L without modifying the wastewater pH. This improvement was associated with the natural coagulant's high molecular weight and long-chained structure since these properties enhance settling time, floc size and strength, and low sludge production. These results support using common mallow as a natural coagulant, making its use more feasible in alkaline water pH or as a coagulant aid combined with aluminum sulfate for urban wastewater treatment. A cost of USD 370/Kg of natural coagulant was estimated, which is higher than conventional coagulants. However, a cost-effectiveness analysis of its implementation should be performed since process scaling costs could significantly reduce its price.

A comprehensive dataset for the evaluation of a horizontal tubular flocculator implemented for drinking water treatment.

This article presents a set of data obtained during the evaluation of a horizontal flow tubular flocculator for the provision of drinking water in developing communities. The HFTF is presented as an alternative technology to replace conventional flocculators, allowing high efficiency in the subsequent sedimentation and filtration processes. For obtaining the data, experimental tests were carried out using lengths of 68.4 m and 97.6 m for the HFTF, these lengths were combined with flow rates of 0.25, 0.5, 0.75, 1.0 and 2.0 L/s, as well as raw water turbidities of 10, 20, 50, 100 and 200 NTU. The data set generated from measurements and observations made during experimental field tests is detailed. The resulting data set covers the main parameters that determine the quality of drinking water, such as turbidity and colour, as well as flocculation efficiency data. The data from the experimental system were compared with a conventional treatment plant that has a baffle flocculator. Likewise, data on the retention time and velocity gradient are presented that allowed the hydraulic characteristics of the HFTF are evaluated. This data set has significant potential for reuse in future research and development related to water treatment technologies in developing community settings. Detailed data has been collected on various operating conditions of the HFTF, such as different lengths, water flow rates and turbidity levels, as well as measurements of key parameters such as turbidity, colour, flocculation efficiency, retention time and velocity gradient, these Data could be used in future research and development related to water treatment technologies. Furthermore, a comparison of data from the experimental system with a conventional treatment plant provides useful insight into the relative performance of different water treatment technologies, which could be of interest to researchers, system designers and public policymakers in the field of drinking water supply in developing communities.

Method for Extraction and Evaluation of Heliocarpus popayanensis and Triumfetta bogotensis as Natural Coagulants for the Treatment of Wastewater.

This research evaluates extracts from the bark of Heliocarpus popayanensis and Triumfetta bogotensis as coagulating agents for removing turbidity in domestic wastewater, considering the coagulant dosage and pH of the wastewater. ANOVA was conducted to assess differences between the coagulants, dosages, and pH, with three pH levels (5, 8, and 9) and six dosages (7, 9, 11, 13, 15, and 17 mL per 1000 mL of wastewater) at a significance level of α = 0.05, and both the p-value and effect size were evaluated. This study found that the mucilaginous compound from the bark of Triumfetta bogotensis performed better in reducing turbidity levels, with an average reduction of 30.2 NTU (Nephelometric Turbidity Unit) (CI [25.9 NTU; 34.5 NTU], α = 0.05) at a pH of 5, and an average initial NTU of 102.2. This represents an average reduction of 70.45%. The dosage factor did not show significant effects on turbidity reduction, which opens the possibility for further study to determine the optimal dosage of the best coagulant.

Assessment of Prickly Pear Fruit Peel Mucilage in Form of Gel as a Green Coagulant for the Tertiary Treatment of Domestic Wastewater.

The application of natural coagulants derived from food byproducts in domestic wastewater tertiary treatment, which contains a number of impurities as suspended colloidal particles, has a potential use as essential substitutes for traditional inorganic coagulants. These biomaterials are a sustainable and environmentally friendly alternative that can be used to improve water quality and human health. In this study, prickly pear (PP) fruit peel mucilage gel was evaluated as a novel coagulant for the tertiary stage of domestic wastewater treatment. Jar tests were performed on residual raw water at the inlet (influent) and outlet (effluent) of the tertiary wastewater treatment (constructed wetland) with a coagulant dose of 12 mg L-1 at a pH of 13. The efficiency of green (i.e., mucilage) and inorganic chemical (i.e., FeCl3) coagulants was compared on the basis of turbidity and color removal. The flocs produced by the coagulants were characterized structurally by FTIR spectroscopy and Zeta potential analysis and morphologically by scanning electron microscopy (SEM). The results showed that the turbidity and the color removal efficiency of the mucilage compared to the FeCl3 at the outlet of the treatment (effluent) were practically the same, reaching 94% turbidity and 85-87% color removal efficiency with both coagulants. The structure and morphology of the flocs generated by the coagulants showed a higher content of organic matter trapped in the flocs. The floc formation observed mechanisms were adsorption/bridging for mucilage and charge neutralization for FeCl3. The results of this study demonstrated that the PP mucilage green coagulant can be used to enhance the quality of treatment of domestic wastewater in an eco-friendly and biodegradable manner.

Remote sensing monitoring of mining tailings in the fluvial-estuarine-coastal ocean continuum of the Lower Doce River Valley (Brazil).

Water clarity is a key parameter of aquatic ecosystems impacted by mining tailings. Tracking down tailings dispersion along the river basin requires a regional monitoring approach. The longitudinal fluvial connectivity, river-estuary-coastal ocean, and the lateral connectivity, river-floodplain-alluvial lakes are interconnected by hydrological flows, particularly during high fluvial discharge. The present study aims to track the dispersal of iron ore tailing spill, from the collapse of the Fundão dam (Mariana, MG, Brazil), on November 5, 2015, in the Lower Doce River Valley. A semi-empirical model of turbidity data, as a water clarity proxy, and multispectral remote sensing data (MSI Sentinel-2), based on different hydrological conditions and well-differentiated water types, yielded an accuracy of 92%. Five floods (> 3187m3 s-1) and five droughts (< 231m3 s-1) events occurred from 2013 to 2020. The flood of January 2016 occurred one month after the mining slurries reached the coast, intruding tailings on some alluvial and coastal plain lakes with highly turbid waters (> 400 NTU). A fluvial plume is formed in the inner shelf adjoining the river mouth on high flow. The dispersion of river plume was categorized as plume core (turbidity > 200 NTU), plume core and inner shelf waters (100-199 NTU), other shelf water (50-99 NTU), and offshore waters (< 50 NTU). Fluvial discharge and local winds are the main drivers for river plume dispersion and transport of terrigenous material along the coast. This work provides elements for evaluating the impact of mining tailings and an approach for remote sensing regional monitoring of surface water quality.

Combined coagulation-electrocoagulation process using biocoagulant from the Opuntia ficus-indica for treatment of cheese whey wastewater.

This work reports a combined coagulation-electrocoagulation process using a biocoagulant from the Opuntia ficus-indica for treatment of cheese whey wastewater. The process parameters as pH, biocoagulant dosage, and current density were evaluated from the chemometric tools. A Box-Behnken design was used, having as responses the removal percentages of turbidity and chemical oxygen demand (COD). The results showed that for the studied variable ranges, linear models were obtained and the pH was parameter more significant for treatment proposed. The pH showed synergic effect with the investigated parameters, while the biocoagulant dosage and density current showed antagonistic effects. The desirability function was used to optimization of process, and suggested values were pH 10.0, biocoagulant dosage of 4.4 g L-1, and current density of 31.5 mA cm-2, which showed removals of turbidity and COD of 98.9 and 83.8%, respectively.

The dynamics of arsenic and copper in solid and aqueous phases in reactive confluences receiving acid drainage: The role of turbidity and particle size.

The fate of suspended solids in aqueous systems enriched with copper (Cu) and arsenic (As) is still poorly understood, especially in mildly acidic streams with natural turbidity. This study integrated field, laboratory, and modeling to determine how turbidity, particle size distribution, and the partition of Cu and As interact in two model river confluences in an Andean watershed (upper Elqui, North-Central Chile). The mildly acidic Toro River (40.4 mgL-1; CuTOTAL>8 mgL-1) was diluted and neutralized at two consecutive confluences, resulting in dissolved As and Cu lower than 0.04 and 0.1 mgL-1, respectively. On-site laser scattering measurements showed that the size of suspended sediments was dominated by ultrafine (d<6 µm) and fine (6200 µm) were not observed, contrasting with other reactive Andean confluences that work as natural coagulation-flocculation reactors. Laboratory mixing experiments with filtered endmembers followed closely the trends observed in the field measurements. SEM observations and thermodynamic calculations, suggested that As-rich amorphous Fe minerals dominated the fine suspended solid inflow (d<15 µm) from the Toro River, while XRD did not reveal significant amounts of crystalline forms of Fe, As, or Cu minerals. Despite fresh precipitates that further associated dissolved As and Cu, the particles from the Toro River grew only slightly after the confluences, thus limiting particle settling potential and a significant metal-(loid)s removal. Consequently, the seasonal variation in the size and chemical nature of suspended solids in acid drainage inflows control the distinct physical and chemical fates of As and Cu after neutralization, as well as hydrodynamic or hydraulic conditions likely also constrain sediment deposition. The combined monitoring of chemical parameters and particle size distributions is a simple and cost-effective method to obtain information about the behavior of metal(loid)s and sediments.

Effects of dredging activities and seasonal variation on coastal plankton assemblages: results from 10 years of environmental monitoring.

Coastal zones support the most productive marine ecosystems, yet they are increasingly threatened by anthropogenic stressors such as dredging. In this study, we investigated how seasonal variation and dredging activities conducted during the construction of a harbor and submarine base (Sepetiba Bay, RJ, Brazil) affected the phytoplankton and zooplankton assemblages. The observed temporal variability at five different sites over 10 years revealed that dredging exceeds the expected influence of dry and rainy seasons on plankton abundance and diversity. In general, the abundance of both groups increased during dredging due to the resuspension of nutrients and benthic organisms. This increase was particularly evident in the dinoflagellate Scrippsiellaa cuminata, the diatoms Thalassiosira rotula and Nitzschia longissima, and the herbivorous zooplankton Acartia clausii and Pseudevadne tergestina. Moreover, season and dredging activities synergistically influenced plankton assemblages, resulting in larger seasonal variations during dredging activities. After the end of the harbor construction, plankton abundance decreased and remained low until the end of the monitoring, which may indicate persistent changes in the biodiversity and ecosystem functioning of impacted areas.

The role of habitat complexity in the survival rates of migratory (native) and sedentary (non-native) species of fish larvae

The increasing losses of original features of many riverine environments and the consequent decline of native aquatic species are now a widely recognized problem. The main river basins of South America have been undergoing constant changes in their communities of fish, with native migratory species disappearing and the rising of sedentary exotic ones. However, few studies report experiments that qualify and/or quantify this correlation. Three experiments were conducted to evaluate the predation mortality of two species of fish larvae (native and non-native) regarding their habitat features. The hypothesis that natural features of habitat (aquatic vegetation and water turbidity) controls the survival rates of fish larvae was tested. The experiments highlight the importance of community structure on population dynamics. The native fish larvae showed to be more adapted than the non-native to using the aquatic plants for refuge. The habitat complexity can be closely related to the persistence of native migratory fish species.(AU)

Heterogeneous Optical Fiber Sensor System for Temperature and Turbidity Assessment in Wide Range.

This paper presents the development of an optical fiber sensor system for multiparametric assessment of temperature and turbidity in liquid samples. The sensors are based on the combination between fiber Bragg gratings (FBGs), intensity variation and surface plasmon resonance (SPR) sensors. In this case, the intensity variation sensors are capable of detecting turbidity with a resolution of about 0.5 NTU in a limited range between 0.02 NTU and 100 NTU. As the turbidity increases, a saturation trend in the sensor is observed. In contrast, the SPR-based sensor is capable of detecting refractive index (RI) variation. However, RI measurements in the turbidity calibrated samples indicate a significant variation on the RI only when the turbidity is higher than 100 NTU. Thus, the SPR-based sensor is used as a complementary approach for the dynamic range increase of the turbidity assessment, where a linearity and sensitivity of 98.6% and 313.5 nm/RIU, respectively, are obtained. Finally, the FBG sensor is used in the temperature assessment, an assessment which is not only used for water quality assessment, but also in temperature cross-sensitivity mitigation of the SPR sensor. Furthermore, this approach also leads to the possibility of indirect assessment of turbidity through the differences in the heat transfer rates due to the turbidity increase.

Efficiency of a multi-barrier household system for surface water treatment combining a household slow sand filter to a Mesita Azul® ultraviolet disinfection device.

Low-cost household technologies for water treatment are crucial to improving drinking water quality and preventing health, social and economic impacts, mostly in middle- and low-income regions. This work assessed the removal efficiency of physical-chemical and bacteriological parameters from river water by a multi-barrier household water treatment system for 113 consecutive days. This system combines a pre-treatment step through a non-woven synthetic blanket, filtration by an intermittent household slow sand filter (HSSF) and a Mesita Azul® ultraviolet disinfection device. In general, the water quality was improved by the evaluated system. Turbidity was removed by an average of 73% (ranging from 33 to 94%), total coliforms (TC) of 3.88 log10 (ranging from 2.22 to 5.16 log10) and E. coli of 2.49 log10 (ranging from 1.81 to 3.30 log10). Filtration improvement was mostly correlated to HSSF biofilm development and influent water quality. Characterisation of HSSF schmutzdecke demonstrated a predominance of organic content, and a higher presence of carbohydrates than proteins on the sand and the blanket. Ultraviolet disinfection with Mesita Azul® inactivated most of the remaining bacteria after filtration and no regrowth was observed after 15 days of disinfection. In conclusion, the multi-barrier household water treatment system was efficient in treating river water, reducing risks of microbial contamination to achieve safe drinking water.

Avaliação da formação de trihalometanos na água de abastecimento público da cidade de Cáceres (MT), Brasil / Evaluation of trihalomethane formation in public water supply in the city of Cáceres, Brazil

RESUMO Estudos recentes vêm demonstrando que a aplicação de cloro poderia levar à formação de trihalometanos (THM), que ocorre quando o cloro reage com a matéria orgânica natural, também denominada de precursora de THM e presente em águas naturais. A United States Environmental Protection Agency (USEPA) classificou os THM como prováveis carcinogênicos para humanos. Com o objetivo de avaliar os níveis de THM na água destinada ao abastecimento público na cidade de Cáceres/MT, foram coletadas amostras de água em três pontos distintos: P1 na água bruta, P2 na saída do reservatório e P3 na rede de abastecimento, por um período de um ano (agosto de 2018 a junho de 2019), com frequência bimestral. Além dos THM, foram monitorados os parâmetros de turbidez, cor, pH e cloro residual livre. Os resultados de água bruta demonstraram que o fenômeno natural denominado "decoada" aumentou as concentrações de turbidez e cor aparente no período enchente/cheia pelo intenso processo de decomposição que ocorre nesse momento, elevando os níveis de matéria orgânica na água bruta. Quanto à água tratada, valores de turbidez fora do preconizado foram detectados. Os níveis de THMs chegaram próximo (0,09518 mg.L-1 - P2) de atingir o VMP de 0,1 mg.L-1 em consequência da presença de precursores. Os valores de THM foram maiores em P2 pelo fato de esse ponto apresentar medição maior de cloro residual livre em relação a P3. Todavia, notou-se uma forte correlação entre THM e turbidez (p < 0,05 e R² = 0,67), o que demonstra que o parâmetro de turbidez pode ser um indicativo da presença de precursores de THM.

ABSTRACT Recent studies have shown that the application of chlorine could lead to the formation of trihalomethanes (THM), which occurs when chlorine reacts with natural organic matter (NOM), also known as precursors of THM, present in natural waters. The United States Environmental Protection Agency (USEPA) has classified THM as probable carcinogens for humans. In order to assess the levels of trihalomethanes in water destined for public supply in the city of Cáceres, state of Mato Grosso, Brazil, water samples were collected from three different points: P1, at raw water; P2, at the outlet of the reservoir; and P3, at the supply network, for a period of one year (from August 2018 to June 2019), with bimonthly frequency. In addition to THM, the parameters of turbidity, color, pH, and free residual chlorine were monitored. The results of raw water demonstrated that the natural phenomenon called "decoada" increased the concentrations of turbidity and apparent color in the flood/spate period, due to the intense decomposition process that occurs in this period, increasing the levels of organic matter in raw water. As for treated water, turbidity values outside the recommended values were detected. THM levels (0.09518 mg.L-1 - P2) almost reached the MPV of mg.L-1, as a result of the presence of precursors. The THM values were higher in P2 because this point presents a higher concentration of free residual chlorine in relation to P3. However, there was a strong correlation between THM and turbidity (p < 0.05 and R² = 0.67), thus demonstrating that the turbidity parameter may be indicative of the presence of THM precursors.

Integration of Remote Sensing and Mexican Water Quality Monitoring System Using an Extreme Learning Machine.

Remote Sensing, as a driver for water management decisions, needs further integration with monitoring water quality programs, especially in developing countries. Moreover, usage of remote sensing approaches has not been broadly applied in monitoring routines. Therefore, it is necessary to assess the efficacy of available sensors to complement the often limited field measurements from such programs and build models that support monitoring tasks. Here, we integrate field measurements (2013-2019) from the Mexican national water quality monitoring system (RNMCA) with data from Landsat-8 OLI, Sentinel-3 OLCI, and Sentinel-2 MSI to train an extreme learning machine (ELM), a support vector regression (SVR) and a linear regression (LR) for estimating Chlorophyll-a (Chl-a), Turbidity, Total Suspended Matter (TSM) and Secchi Disk Depth (SDD). Additionally, OLCI Level-2 Products for Chl-a and TSM are compared against the RNMCA data. We observed that OLCI Level-2 Products are poorly correlated with the RNMCA data and it is not feasible to rely only on them to support monitoring operations. However, OLCI atmospherically corrected data is useful to develop accurate models using an ELM, particularly for Turbidity (R2 = 0.7). We conclude that remote sensing is useful to support monitoring systems tasks, and its progressive integration will improve the quality of water quality monitoring programs.

Human impacted shallow lakes in the Pampean plain are ideal hosts for cyanobacterial harmful blooms.

The ecological status of Pampean shallow lakes is evidenced by Cyanobacteria Harmful Blooms impairing these nutrient enriched, turbid and polymictic water bodies spread along the Central Plains of Argentina. Under the premise that shallow lakes are sentinels of global climate and eutrophication, a 3-year research in ten lakes located across a climatic gradient explored which factors drove the dynamics of cyanobacterial assemblages frequently driving to bloom prevalence. Contrarily to what is expected, the effect of seasonal temperature on cyanobacteria was subordinated to both the light environment of the water column, which was on turn highly affected by water level conditions, and to nutrient concentrations. Monthly samplings evidenced that cyanobacterial assemblages presented a broad-scale temporal dynamics mostly reflecting inter-annual growth patterns driven by water level fluctuations. Both species composition and biovolume gradually changed across a gradient of resources and conditions and hence, the scenario in each individual lake was unique with patterns at different temporal and spatial scales. More than 35 filamentous and colonial morphospecies constituted the assemblages of Pampean lakes: nostocaleans and chroococcaleans were inversely correlated in the prevailing interannual 3-cycled patterns.

Applicability of statistical analysis for performance and reliability evaluation of large-scale water treatment plants with direct filtration systems.

Water treatment plants (WTPs) are extremely important in basic sanitation services because of their association with human health by producing safe drinking water. Thus, their proper operation is of utmost relevance and has led to the development of distinct performance evaluation methodologies. Direct filtration is a leading technology applied in WTPs. However, although it costs less than conventional treatment, it might also be less flexible and robust. To evaluate performance with data from real-scale WTPs with direct filtration systems, the use of a statistical analysis methodology for turbidity, apparent color, and pH data from raw and effluent water is proposed. Reliability analysis, a probabilistic-based methodology, was applied for turbidity alongside evaluating the compliance of the treated water with different potability standards. The parameters pH (between 6.0 and 8.0) and apparent color (< 15 HU) showed almost complete compliance (> 99%). Reliability analysis could not be applied for apparent color and pH, while apparent color did not adhere to the lognormal distribution frequency. The turbidity results show high variability in the coefficients of variation and reliability among various plants and a general difficulty in complying with stricter standards, such as the 0.1 and 0.3 NTU defined by the United States Environmental Protection Agency. All WTP studies show a 95% compliance with the World Health Organization standard of 5.0 NTU. A higher value for the coefficient of reliability and a lower value for the variation coefficient could indicate a more stable process, regardless of the treated water quality, highlighting the relevance of applying combined methods for performance evaluation, such as compliance with established standards.

A new methodology to assess the solubility of fatty acids: Impact of food emulsifiers.

In food formulations, lipids are normally incorporated as emulsions stabilized by different types of emulsifiers. The emulsifiers can affect fatty acid (FA) solubilization as they can interact with FA. The main purpose of the present work is the development of a methodology to evaluate the FA solubilization in an aqueous medium in the absence and presence of exogenous emulsifiers. To this end, a combination of turbidimetry, oiling off and dynamic light scattering (DLS) was used. The FA solubility, as well as its supramolecular assemblies, were determined by analyzing the changes in the turbidity profile and the corresponding size of particles obtained by DLS. Oleic acid (OA) was used as a model FA and a simulated intestinal fluid (SIF) as the aqueous phase. Emulsifiers of low (Tween 80) and high (protein and polysaccharide) molecular weight were tested. Tween 80 was the only emulsifier that improved OA solubilization, whereas the macromolecules only affected the supramolecular structure that OA adopted, being the structure of these assemblies governed by the emulsifier nature.

Photobiology of the giant kelp Macrocystis pyrifera in the land-terminating glacier fjord Yendegaia (Tierra del Fuego): A look into the future?

The channel and fjord region of southern Chilean Patagonia hosts giant kelp forests (Macrocystis pyrifera) that have little known site-specific responses to diverse physical gradients. In this study, the functionality of the bio-optical, morphological and biochemical features of the kelps, that determine their light trapping and acclimation, were studied along a gradient of varying turbidity and light conditions at the land-terminating glacier of fjord Yendegaia in the Beagle Channel. These habitats are marked by glacial retreat, and M. pyrifera has successfully colonized new areas due to the effects of warming. Results indicated that under a sharp gradient of turbidity and light availability, the kelps have adapted shading characteristics. The photobiological traits (e.g. light absorption, pigment concentration, photochemistry and blade optics) of algae from depths between 6 and 13 m varied in relation to the degree of turbidity along the fjord. However, these populations did not show obvious intra-thallus variation along the longitudinal profile e.g. blades located at different depths showed relatively similar acclimation potential to the prevailing light field. Only basal sporophylls showed general differences in comparison with the vegetative fronds. Otherwise, the high phenolic (phlorotannin) content, which was reflected in the massive presence of intracellular physodes, suggests that these organisms could be biochemically well-equipped to cope with changes in physical conditions or the presence of herbivore invertebrates (e.g. sea urchins).

Treatment of re-refining effluent from lubricating oils by combining electrocoagulation and coagulation-flocculation processes.

A combination of electrocoagulation and coagulation-flocculation processes was used for re-refining effluent from lubricating oils. The efficiency of the process was evaluated based on the chemical oxygen demand (COD), color, and turbidity of the refined effluent. Electrocoagulation (EC) and coagulation-flocculation parameters, such as the initial pH (3.00, 4.41, and 9.00), and current density (4, 9, and 16 A/m2), and the use of aluminum polychloride coagulant and superfloc A300 flocculant were studied. EC performed at pH 9, with a current density of 16 A/m2 and 7 V, resulted in removal efficiencies of 85.14%, 99.81%, and 99.85%, for COD, color, and turbidity, respectively. The removal efficiencies increased to 96%, 99.87%, and 99.94% for COD, color, and turbidity, respectively, by the further coagulation-flocculation treatment in the presence of 13.8 mg/L aluminum polychloride coagulant and 80 mg/L Superfloc A300 flocculant.

Household slow sand filters with and without water level control: continuous and intermittent flow efficiencies.

Four household slow sand filters were made out of PVC and operated in continuous and intermittent flows, with and without using a float to control the maximum level of water inside the units. The efficiency was evaluated as a function of Escherichia coli reduction and turbidity in water from the study prepared with kaolinite and E. coli suspension. The correlation of the efficiencies with the following operational parameters was evaluated: operating time, time after maintenance, filtration rate and head loss divided by bed thickness. The filters were classified as intermittent with float (IFF), intermittent without float (IF), continuous with float (CFF) and continuous without float (CF). IFF, CFF and CF had a non-woven blanket installed on top of the media. The results indicated that no significant statistical differences were found in E. coli reduction and turbidity between IFF and IF, however the former had filter runs over 80 days and the latter almost a quarter of this value. CFF matured faster and had less turbidity remaining in relation to CF. When comparing IFF with CFF, the former presented lower turbidity remaining (0.89 ± 0.44 NTU versus 1.24 ± 0.91NTU), but a lower reduction of E. coli (1.40 ± 0.61 log versus 2.29 ± 0.74 log). The time after maintenance was the most important operational parameter when evaluating the efficiencies. The float helped to mature the filter more quickly in a continuous flow and, together with a non-woven blanket, extended the filter runs in the intermittent flow.

Evaluation of the efficiency of coagulation/flocculation and Fenton process in reduction of colour, turbidity and COD of a textile effluent.

The present study investigated the efficiency of physicochemical processes of coagulation and flocculation and Fenton advanced oxidative process in reducing the parameters of colour, turbidity and Chemical Oxygen Demand (COD) of a real effluent from a textile industry. During the physicochemical process, the efficiencies of different coagulants (aluminium polychloride (Polifloc 18), ferric chloride (Acquafloc FC40), aluminium sulphate combined with organic coagulant (AST) and aluminium sulphate) and nonionic (FX NS2), cationic (FX CS6 and FX CS7) and anionic (FX AS6 and AN905) flocculants were tested. After the tests, 72.60% of COD, 36.25% of colour and 98.59% of turbidity were removed, using aluminium polychloride coagulant and AN 905 flocculant. It was also evaluated the effect of Fenton advanced oxidative process application in removal of colour, COD and turbidity of the effluent previously treated through the physicochemical process. Removals of these parameters were analysed in two different pH ranges (pH 6.0 and 7.0). In both pH 6.0 and pH 7.0, reductions were observed in all analysed parameters, obtaining 170.78 mg O2/L of COD, 22.19 mg/L of colour and 0.80 NTU of turbidity (at pH 6.0) and 151.80 mg O2/L of COD, 26.73 mg/L of colour, 0.94 NTU of turbidity (at pH 7.0), which demonstrates the efficiency of this process in the reduction of parameters analysed.