Dinuclear zinc(II) acetate complexes derived from N,N',S-tridentate Schiff bases: synthesis, structural study and Hirshfeld surface analysis.

Three dinuclear zinc(II) acetate complexes of the general formula [Zn{Ln}(AcO)]2, namely, di-µ-acetato-κ4O:O'-bis[({2-[(pyridin-2-ylmethylidene)amino]phenyl}sulfanido-κ3N,N',S)zinc(II)], [Zn2(C12H9N2S)2(C2H3O2)2] (n = 1), 4, µ-acetato-1:2κ2O:O'-acetato-2κO-[µ-(2-{[1-(pyridin-2-yl)ethylidene]amino}phenyl)sulfanido-1κS:2κ3N,N',S][(2-{[1-(pyridin-2-yl)ethylidene]amino}phenyl)sulfanido-1κ3N,N',S]dizinc(II), [Zn2(C13H11N2S)2(C2H3O2)2] (n = 2), 5, and µ-acetato-1:2κ2O:O'-acetato-2κO-[µ-(2-{[phenyl(pyridin-2-yl)methylidene]amino}phenyl)sulfanido-1κS:2κ3N,N',S][(2-{[phenyl(pyridin-2-yl)methylidene]amino}phenyl)sulfanido-1κ3N,N',S]dizinc(II)-bis(2-aminophenyl) disulfide (2/1), [Zn2(C18H13N2S)2(C2H3O2)2]·0.5C12H12N2S2 (n = 3), 6·0.5(2-APS)2, were obtained from the reaction of 2-R-(pyridin-2-yl)benzothiazoline precursors (R = H, 1; R = Me, 2; R = Ph, 3) with zinc acetate dihydrate in a 1:1 ratio. All the complexes crystallized as dinuclear species and complex 6 cocrystallized with one molecule of bis(2-aminophenyl) disulfide (2-APS)2. The anionic Schiff base ligands {Ln}- displayed a κ2N,κS-tridentate coordination mode with the formation of two five-membered chelate rings. In 4, 5 and 6·0.5(2-APS)2, both ZnII ions are pentacoordinated and the coordination sphere of 4 was different with respect to those in 5 and 6·0.5(2-APS)2. For 4, the X-ray diffraction study showed a dinuclear complex containing two bridging acetate ligands linked to both ZnII ions. For 5 and 6·0.5(2-APS)2, the dinuclear complexes displayed one bridging acetate ligand linked to both ZnII ions, where the first ZnII ion includes a dative bond with one S atom from an adjacent anionic Schiff base {Ln}-, while the second ZnII ion is coordinated to one terminal acetate ligand. In each dinuclear complex, the geometry is the same for both ZnII metal centres. The local geometry of the ZnII cation in 4 is halfway between trigonal bipyramidal and square pyramidal local geometries; in 5 and 6, the local geometries are described as distorted square pyramidal. Hirshfeld surface analysis of 5 and 6 showed the predominance of H...H interactions, as well as the contribution of C-H...C, C-H...O and C-H...S noncovalent interactions to the cohesion of the crystalline network of the ZnII complexes.

Selective Methylation of Cyclic Ether Towards Highly Elastic Solid Electrolyte Interphase for Silicon-based Anodes.

Silicon (Si)-based anodes offer high theoretical capacity for lithium-ion batteries but suffer from severe volume changes and continuous solid electrolyte interphase (SEI) degradation. Here, we address these challenges by selective methylation of 1,3-dioxolane (DOL), thus shifting the unstable bulk polymerization to controlled interfacial reactions and resulting in a highly elastic SEI. Comparative studies of 2-methyl-1,3-dioxolane (2MDOL) and 4-methyl-1,3-dioxolane (4MDOL) reveal that 4MDOL, with its larger ring strain and more stable radical intermediates due to hyperconjugation effect, promotes the formation of high-molecular-weight polymeric species at the electrode-electrolyte interface. This elastic, polymer-rich SEI effectively accommodates volume changes of Si and inhibits continuous side reactions. Our designed electrolyte enables Si-based anode to achieve 85.4% capacity retention after 400 cycles at 0.5 C without additives, significantly outperforming conventional carbonate-based electrolytes. Full cells also demonstrate stable long-term cycling. This work provides new insights into molecular-level electrolyte design for high-performance Si anodes, offering a promising pathway toward next-generation lithium-ion batteries with enhanced energy density and longevity.

Bulky Phosphazenium Salt Controlling Chemoselective Terpolymerization of Epoxide, Anhydride and CO2: From Well-Defined Block to Truly Random Copolymers.

Copolymers with precise compositions and controlled sequences are great appealing for high-performance polymeric materials, but their synthesis is very challenging. In this study, tetrakis[tris(dimethylamino)phosphoranylidenamino] phosphonium chloride (P5Cl) and triethylboron (TEB) were chosen as the binary catalyst to synthesize both well-defined block and truly random poly(ester-carbonate) copolymers via the one-pot/one-step terpolymerization of epoxide/anhydride/CO2 under metal-free conditions. The bulky nature of phosphazenium cation not only led to loose cation-anion pairs and enhanced the reactivity, but also provided the chain-end an appropriate protection and improved the controllability. In particular, P5Cl/TEB with a molar ratio of 1/0.5 showed an extraordinary chemoselectivity for ring-opening alternating copolymerization (ROAC) of cyclohexene oxide (CHO) and phthalic anhydride (PA) first and then ROAC of CHO/CO2. Thus, well-defined block polyester-polycarbonate copolymers were synthesized by CHO/PA/CO2 terpolymerization. The chemoselectivity was easily tuned and the ROAC of CHO/PA and ROAC of CHO/CO2 occurred simultaneously with P5Cl/TEB = 1/2, producing truly random poly(ester-carbonate) copolymers from CHO/PA/CO2. In addition, this P5Cl/TEB catalyst and the strategy to regulate its chemoselectivity are versatile for various anhydrides, epoxides and initiators. Thus, poly(ester-carbonate) copolymers with varying sequences, compositions, and topologies are successfully synthesized, making it possible to compare their properties and to expand their applications.

Selective Copolymerization from Mixed Monomers of Phthalic Anhydride, Propylene Oxide and Lactide Using Nano-Sized Zinc Glutarate.

Selective polymerization with heterogeneous catalysts from mixed monomers remains a challenge in polymer synthesis. Herein, we describe that nano-sized zinc glutarate (ZnGA) can serve as a catalyst for the selective copolymerization of phthalic anhydride (PA), propylene oxide (PO) and lactide (LA). It was found that the ring-opening copolymerization (ROCOP) of PA with PO occurs firstly in the multicomponent polymerization. After the complete consumption of PA, the ring-opening polymerization (ROP) of LA turns into the formation of block polyester. In the process, the formation of zinc-alkoxide bonds on the surface of ZnGA accounts for the selective copolymerization from ROCOP to ROP. These results facilitate the understanding of the heterogeneous catalytic process and offer a new platform for selective polymerization from monomer mixtures.

Coordination Chemistry and Reactivity of a Lewis Acidic Di-Zinc Framework Supported by Bisphenoxymethanone Ligands.

We present the synthesis, structural characterization, and reactivity studies of a tetra-zinc complex supported by the bisphenoxymethanone ligands and its transformation into various di-zinc architectures. Our findings highlight the potential of these complexes in molecular recognition, supramolecular chemistry, and catalysis.

Stereoregular Poly(Phenyl Glycidyl Ethers): In Situ Formation of a Polyether Stereocomplex from a Racemic Monomer Mixture.

Polymer stereocomplex formation represents a promising research area as it can improve thermal and mechanical properties of co-crystallized polymer strands of opposite chirality. Polymers that form stereocomplexes commonly feature high stereoregularity and usually require sourcing from enantiopure monomer building blocks. Herein, we report the in situ polyether stereo-complex formation from racemic epoxide monomers, i.e., substituted methyl phenyl glycidyl ethers. The bio-renewable glycidyl ethers were explored in both enantio- and isoselective ring-opening polymerizations (ROPs), resulting in isotactic poly(phenyl glycidyl ether). While the enantio-selective ROP selectively resolves a single enantiomeric, isotactic polyether stereoisomer ([mm]P ≥ 78%), the isoselective ROP leads to the concurrent formation of both isotactic (R)- and (S)-poly(phenyl glycidyl ether) stereoisomers ([mm]P ≥ 92%) and thus results directly in a stereoisomer blend, which forms a stereocomplex. This is one of only a few polymer stereocomplexes generated directly during polymerization from a racemic monomer mixture. Stereo-complexes of the different poly(phenyl glycidyl ether)s show an increase in melting temperature of up to 76 °C, relative to the enantiopure parent polymers. The position of the methyl group at the phenyl ring determines both stereocomplex formation and the thermal properties of the resulting materials.

Synthesis of Rare Earth Metal Complexes Stabilized by Amine Bridged Bis(phenolato) Ligands and Their Performance in the Polymerization of rac-ß-Butyrolactone.

A series of rare earth alkoxides bearing amine-bridged bis(phenolato) ligands were synthesized through sequential reactions of RE(C5H5)3(THF) (RE = Y, Lu) or Nd[N(SiMe3)2]3 with bis(phenols) LH2 and CF3CH2OH. Complexes REL(OCH2CF3)(THF)n (1-6) bearing different aryl-substituents were obtained in good yields of 59-70%. They were applied in the ring-opening polymerization (ROP) of rac-ß-butyrolactone (rac-BBL), which showed good activity (TOF up to 27,300 h-1), resulting in syndiotactically enriched poly(3-hydroxybutyrate) (PHB) (Pr up to 0.86) with narrow polydispersities (PDI ≤ 1.27). The yttrium complex 3 bearing bulky o-1,1-diphenylethyl substituents outperformed other complexes, suggesting that the smaller ionic radii of metal centers and bulky ortho substituents of ancillary ligands play crucial roles in controlling the activity and stereoselectivity in ROP of rac-BBL. Kinetics of the polymerization of rac-BBL initiated by complex 3 was investigated, which revealed first order dependences on the monomer and initiator concentrations, respectively.

Simplified Synthesis of Poly(ethyleneimine)-Modified Silica Particles and Their Application in Oligosaccharide Isolation Methods.

There are great challenges in the field of natural product isolation and purification and in the pharmacological study of oligosaccharide monomers. And these isolation and purification processes are still universal problems in the study of natural products (NPs), traditional Chinese medicine (TCM), omics, etc. The same polymer-modified materials designed for the special separation of oligosaccharides, named Sil-epoxy-PEI and Sil-chloropropyl-PEI, were synthesized via two different methods and characterized by scanning electron microscopy combined with energy spectrum analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potential as well as surface area analysis, etc. Several nucleotide/nucleoside molecules with different polarities and selectivities were successfully isolated in our laboratory using stainless-steel columns filled with the synthesized material. In addition, the separation of saccharide probes and oligosaccharides mixtures in water extracts of Morinda officinalis were compared in HILIC mode. The results showed that the resolution of separations for the representative analytes of the Sil-epoxy-PEI column was higher than for the Sil-chloropropyl-PEI column, and the developed stationary phase exhibited improved performance compared to hydrothermal carbon, amide columns and other HILIC materials previously reported.

Intensive Cycloalkyl-Fused Pyridines for Aminopyridyl-Zinc-Heteroimidazoles Achieving High Efficiency toward the Ring-Opening Polymerization of Lactides.

The model precatalyst sp3- and sp2-N dinitrogen-coordinated zinc-heteroimidazole has been used as an efficient catalyst for the ring-opening polymerization of cyclic esters. Subsequent to our exceptional active 5,6,7-trihydroquinolin-8-amine-zinc catalysts for the ring-opening polymerization (ROP) of ε-caprolactone, various pyridine-fused cycloalkanones (ring size from five to eight) are developed for the correspondent fused amine-pyridine derivatives and their zinc-heteroimidazole chloride complexes Zn1-Zn8 (LZnCl2) bearing N-diphenylphosphinoethyl pendants. Activated with two equivalents of LiN(SiMe3)2, the title zinc complexes efficiently promote the ROP of L-lactide (L-LA) in situ; among them, Zn4/2Li(NSiMe3)2 catalyzed 500 equivalent L-LA at 80 °C with 92% conversion in 5 min (TOF: 5520 h-1). Under the same conditions, the catalytic efficiency for the ROP of rac-LA by Zn1-Zn8/2Li(NSiMe3)2 was slightly lower than that for L-LA (highest TOF: 4440 h-1). In both cases, cyclooctyl-fused pyridyl-zinc complexes exhibited higher activity than others, while the cycloheptyl-fused zinc complexes showed the lowest activity. The microstructure analysis of the polymers showed they possessed a linear structure capped with CH3O as major and cyclic structure as minor. In this work, all the ligands and zinc complexes were well characterized by 1H/13C/31P NMR, FT-IR spectroscopy as well as elemental analysis.

Rational Design of Oil-Resistant and Electrically Conductive Fluorosilicone Rubber Foam Nanocomposites for Sensitive Detectability in Complex Solvent Environments.

Recent years have witnessed the explosive development of highly sensitive smart sensors based on conductive polymer foam materials. However, the design and development of multifunctional polymeric foam composites as smart sensors applied in complex solvent and oil environments remain a critical challenge. Herein, we design and synthesize vinyl-terminated polytrifluoropropylmethylsiloxane through anionic ring-opening polymerization to fabricate fluorosilicone rubber foam (FSiRF) materials with nanoscale wrinkled surfaces and reactive Si-H groups via a green and rapid chemical foaming strategy. Based on the strong adhesion between FSiRF materials and consecutive oxidized ketjen black (OKB) nano-network, multifunctional FSiRF nanocomposites were prepared by a dip-coating strategy followed by fluoroalkylsilane modification. The optimized F-OKB@FSiRF nanocomposites exhibit outstanding mechanical flexibility in wide-temperature range (100 cycle compressions from -20 to 200 °C), structure stability (no detached particles after being immersed into various aqueous solutions for up to 15 days), surface superhydrophobicity (water contact angle of 154° and sliding angle of ∼7°), and tunable electrical conductivity (from 10-5 to 10-2 S m-1). Additionally, benefiting from the combined actions of multiple lines of defense (low surface energy groups, physical barriers, and "shielding effect"), the F-OKB@FSiRF sensor presents excellent anti-swelling property and high sensitivity in monitoring both large-deformation and tiny vibrations generated by knocking the beaker, ultrasonic action, agitating, and sinking objects in weak-polar or nonpolar solvents. This work conceivably provides a chemical strategy for the fabrication of multifunctional polymeric foam nanocomposite materials as smart sensors for broad applications.

Synthesis, Structures, and Properties for PIII-Doped Hetero-Buckybowls and Their Phosphonium Salts.

Doping polycyclic aromatic hydrocarbons with heteroatoms enables manipulation of their electronic structures. Herein, the structures and properties of phosphorus (P) doped heterosumanenes (HSEs) are regulated by varying the valence states of P-dopant. The phosphine sulfide (PV) and chalcogens (S, Se, Te) co-doped HSEs (1-3) are reduced to trivalent phosphorus (PIII) doped analogues 4-6. Then, the PIII-dopants on 4-6 are converted to phosphonium salts (R4P+), giving 7-9. The valence states of P-dopant show great influence on molecular geometries and electronic structures. Taking P and S co-doped HSEs as example, bowl-depths increase in the order of 1 (PV) < 7 (R4P+) < 4 (PIII), and the HOMO energy levels and HOMO-LUMO gaps increase to be 7 < 1 < 4. Consistent with the theoretical calculation, the first oxidation potentials decrease and the absorption/emission bands show blue shift from 7 to 1 to 4. The transformation of PV to PIII leads to large variations on the coordination with Ag+, owing to the alteration of coordination site from P=S to PIII. The phosphonium salts show ring-opening of phosphole rings under electrochemical reduction. It is found that chalcogen atoms play pivotal roles on coordination patterns of coordination complexes and the conversion rates of ring-opening reactions.

Electrochemical aptasensor based on a dual signal amplification strategy of 1-AP-CNHs and ROP for highly sensitive detection of ERα.

Estrogen receptor alpha (ERα) serves as a crucial biomarker for early breast cancer diagnosis. In this study, we proposed an electrochemical aptasensor with nanomaterial carbon nanohorns/gold nanoparticle composites (1-AP-CNHs/AuNPs) as the substrate, and the primary amine groups on the antibody initiated the ring-opening polymerization (ROP) of monomer amino acid-ferrocene (NCA-Fc) on the electrode surface for ultrasensitive detection of ERα. The composite of 1-AP-CNHs/AuNPs not only possessed more active sites, but also increased the specific surface area of the electrode and allowed a large amount of ferrocene polymer long chains to be grafted onto the electrode surface to achieve signal amplification. Under optimal conditions, the detection limit of the method was 11.995 fg mL-1 with a detection range of 100 fg mL-1-100 ng mL-1. In addition, the biotin-streptavidin system was used to further improve the sensitivity of the sensor. Importantly, this approach could be applied for the practical detection of ERα in real samples.

Degradation pathways and product formation mechanisms of asphaltene in supercritical water.

Asphaltene is the compound with the most complex structure and the most difficult degradation in oily sludge, which is the key to limit the efficiency of supercritical water oxidation treatment of oily sludge. In this paper, the supercritical water oxidation process of asphaltene was investigated in terms of free radical reaction, degradation pathway, and product generation mechanism using ReaxFF molecular dynamics simulation method. The results showed that increasing temperature, increasing O2, and increasing H2O have different effects on HO2·generation. Benzene rings undergo fusion and condensation through hydrogenation abstraction and oxygen addition reactions, subsequently breaking down into long-chain alkanes. Increasing O2 can effectively promote the ring-opening of nitrogen-containing heterocycles. -COOH is the most important intermediate fragment for CO and CO2 generation, and there is a reaction competition with -CHO3 and -CO3. When the number of oxygen molecules increases from 300 to 700, the reaction frequency of -CHO3 and -CO3 to generate CO and CO2 increases by 17.14 % and 12.77 %·H2O determines the production of H2 by controlling the number of H·radicals present. As the amount of H2O increases from 500 to 1500, the product ratio of H2 increases from 12.73 % to 21.31 %. ENVIRONMENTAL IMPLICATION: Asphaltene is the most structurally complex organic matter in oily sludge, and its presence makes it difficult for oily sludge to be completely degraded by conventional treatment methods such as pyrolysis and incineration. Polycyclic aromatic hydrocarbons (PAHs) represented by asphaltene increase the carcinogenicity and mutagenicity of oily sludge, and even irreversibly pollute soil and groundwater. Supercritical water oxidation, as an efficient organic waste treatment technology, can realize harmlessness in a green and efficient way. So the study on the mechanism of supercritical water oxidation of asphaltene is of great significance for environmental protection.

D-Hexopyranosides with Vicinal Nitrogen-Containing Functionalities.

Various substituted D-hexopypyranosides units with nitrogen-containing functionalities are present in many important natural compounds and pharmaceutical substances. Since their complex structural diversity contributes to a broad spectrum of biological functions and activities, these derivatives are frequently studied. This review covers syntheses of D-hexopyranosides with vicinal nitrogen-containing functionalities since the 1960s, when the first articles emerged. The syntheses are arranged according to the positions of substitutions, to form a relative configuration of vicinal functionalities, and synthetic methodologies.

One-Pot Access to Functionalised Malamides via Organocatalytic Enantioselective Formation of Spirocyclic ß-Lactone-Oxindoles and Double Ring-Opening.

Malamides (diamide derivatives of malic acid) are prevalent in nature and of significant biological interest, yet only limited synthetic methods to access functionalised enantiopure derivatives have been established to date. Herein, an effective synthetic method to generate this molecular class is developed through in situ formation of spirocyclic ß-lactone-oxindoles (employing a known enantioselective isothiourea-catalysed formal [2+2] cycloaddition of C(1)-ammonium enolates and isatin derivatives) followed by a subsequent dual ring-opening protocol (of the ß-lactone and oxindole) with amine nucleophiles. The application of this protocol is demonstrated across twelve examples to give densely functionalised malamide derivatives with high enantio- and diastereo-selectivity (up to >95:5 dr and >99:1 er).

Star-Like Polypeptides as Simplified Analogues of Horseradish Peroxidase (HRP) Metalloenzymes.

Peroxidases, like horseradish peroxidase (HRP), are heme metalloenzymes that are powerful biocatalysts for various oxidation reactions. By using simple grafting-from approach, ring-opening polymerization (ROP), and manganese porphyrins, star-shaped polypeptides analogues of HRP capable of catalyzing oxidation reactions with H2O2 is successfully prepared. Like their protein model, these simplified analogues show interesting Michaelis-Menten constant (KM) in the mM range for the oxidant. Interestingly, the polymer structures are more resistant to denaturation (heat, proteolysis and oxidant concentration) than HRP, opening up interesting prospects for their use in catalysis or in biosensing devices.

Hydrazine-Catalysed Ring-Opening Metathesis Polymerization Of Cyclobutenes.

Materials formed by the ring-opening metathesis polymerization (ROMP) of cyclic olefins are highly valued for industrial and academic applications but are difficult to prepare free of metal contaminants. Here we describe a highly efficient metal-free ROMP of cyclobutenes using hydrazine catalysis. Reactions can be initiated via in situ condensation of a [2.2.2]-bicyclic hydrazine catalyst with an aliphatic or aromatic aldehyde initiator. The polymerizations show living characteristics, achieving excellent control over molecular weight, low dispersity values, and high chain-end fidelity. Additionally, the hydrazine can be used in substoichiometric amounts relative to the aldehyde chain-end while maintaining good control over molecular weight and low dispersity values, indicating that a highly efficient chain transfer mechanism is occurring.

Air-Stable Boranes and Borinanes Encapsulated in Organogels for Anionic Ring-Opening (Co)Polymerization.

Organoborane reagents play a pivotal role as Lewis acids in acid-base pairs used in anionic polymerization and in other reactions; yet their high sensitivity to oxygen and moisture necessitates effective stabilization to prevent their oxidation and thus maintain their catalytic activity. In this study, we present novel encapsulation methods employing a cost-effective hexatriacontane (C36H74, C36) organogel to stabilize sensitive organoborane reagents, including triethyl borane (TEB) and a borinane-based ammonium salt (B3NBr). These organoboranes encapsulated in stable, self-standing organogel blocks enable their safe handling in open laboratory environments without the need for a glovebox. Upon heating such borane-containing organogel blocks organoboranes could be freed from the organogel and used to mediate both the homopolymerization of propylene oxide (PO) and the copolymerization of PO with CO2. Furthermore, efficient recovery of the C36 gelator from polymerization mixtures is achieved, with mass recovery ranging from 70% to 90%. This encapsulation method offers a practical and efficient solution for stabilizing, storing, and handling highly reactive organoborane reagents, thereby broadening their applicability and utilization in various chemical transformations.

Volumetric Additive Manufacturing of Dicyclopentadiene by Solid-State Photopolymerization.

Polymerization in the solid state is generally infeasible due to restrictions on mobility. However, in this work, the solid-state photopolymerization of crystalline dicyclopentadiene is demonstrated via photoinitiated ring-opening metathesis polymerization. The source of mobility in the solid state is attributed to the plastic crystal nature of dicyclopentadiene, which yields local short-range mobility due to orientational degrees of freedom. Polymerization in the solid state enables photopatterning, volumetric additive manufacturing of free-standing structures, and fabrication with embedded components. Solid-state photopolymerization of dicyclopentadiene offers a new paradigm for advanced and freeform fabrication of high-performance thermosets.

Enhancing CO2 Transport Across the PEG/PPG-Based Crosslinked Rubbery Polymer Membranes with a Sterically Bulky Carbazole-Based ROMP Comonomer.

A series of poly(ethylene glycol)-block-poly(propylene glycol) (PEG/PPG)- and 5,6-di(9H-carbazol-9-yl)isoindoline-1,3-dione (2CZPImide)-based crosslinked rubbery polymer membranes, denoted as PEG/PPG-2CZPImide (x:y), are prepared from the norbornene-functionalized PEG/PPG oligomer (NB-PEG/PPG-NB) and 2-(bicyclo[2.2.1]hept-5-en-2-ylmethyl)-5,6-di(9H-carbazol-9-yl)isoindoline-1,3-dione (2CZPImide-NB) via ring-opening metathesis polymerization (ROMP). The molar ratio (x:y) of the NB-PEG/PPG-NB (x) to 2CZPImide-NB (y) monomers is varied from 10:1 to 6:1. X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), and pure gas permeability studies reveal that the comonomer 2CZPImide-NB successfully increases the d-spacing among the crystalline PEG/PPG segments, hence enhancing the diffusivity of gases through the membranes. The synthesized membranes exhibit good CO2 separation performance, with CO2 permeabilities ranging from 311.1 to 418.1 Barrer and CO2/N2 and CO2/CH4 selectivities of 39.4-52.0 and 13.4-16.0, respectively, approaching the 2008 Robeson upper bound. Moreover, PEG/PPG-2CZPImide (6:1), displaying optimal CO2 permeability and CO2/N2 and CO2/CH4 selectivities, shows long-term stability against physical aging and plasticization resistance up to 20 days and 10 atm, respectively.