Synthesis and Photocatalytic sp3 C-H Bond Functionalization of Salen-Ligand-Supported Uranyl(VI) Complexes.

Recent years have seen increasing interest in uranyl(VI) photocatalysis. In this study, uranyl complexes were successfully synthesized from ligands L1-L6 and UO2(NO3)2·6H2O under reflux conditions, yielding products 1-6 with yields ranging from 30% to 50%. The complexes were thoroughly characterized using NMR spectroscopy, single-crystal X-ray diffraction, and elemental analysis. The results indicate that complexes 1-5 possess a pentagonal bipyramidal geometry, whereas complex 6 exhibits an octahedral structure. The photocatalytic properties of these novel complexes for sp3 C-H bond functionalization were explored. The results demonstrate that complex 4 functions as an efficient photocatalyst for converting C-H bonds to C-C bonds via hydrogen atom transfer under blue light irradiation.

Ruthenium(II) Complex-Based Tetradentate Schiff Bases: Synthesis, Spectroscopic, Antioxidant, and Antibacterial Investigations.

In this work, we describe the synthesis of novel Ruthenium (II) complex-based salen Schiff bases. The obtained Ruthenium (II) complexes are characterized using usual spectroscopic and spectrometric techniques, viz., IR, UV-Vis, NMR (1H and 13C), powder X-ray diffraction, and HRMS. Further techniques, such as DTA-TGA and elemental analysis, are used to well establish the structure of the obtained complexes. Octahedral geometries are tentatively proposed for the new Ru(II) complexes. The measured molar conductance for the Ruthenium (II) complexes shows their electrolytic nature (4.24-4.44 S/m). The new Ru(II) complexes are evaluated for their antioxidant and antibacterial activities. The DPPH radical scavenging, FRAP, and total antioxidant capacity (TAC) assays show that the obtained complexes are more potent than the used positive control. They also exhibit promising antibacterial responses against pathogen bacteria: [RuH2L3Cl2] exhibits an important inhibition against Bacillus subtilis DSM 6633, with an inhibition zone of 21 ± 1.41 mm with an MIC value of 0.39 mg/mL, and Proteus mirabilis INH, with 16.50 ± 0.70 mm and an MIC value of 0.78 mg/mL, while [RuH2L2Cl2] exerts interesting antibacterial effects versus Bacillus subtilis DSM 6633 (21 ± 1.41 mm) and Proteus mirabilis INH (25.5 ± 0.70 mm) with equal MIC values of 0.97 mg/mL.

Unveiling the Reactivity of Part Per Million Levels of Cobalt-Salen Complexes in Hydrosilylation of Ketones.

A series of air-stable cobalt(III)salen complexes Co-1 to Co-4 have been synthesized and employed in the hydrosilylation of ketones. Notably, the most intricately tailored Co-3 pre-catalyst exhibited exceptional catalytic activity under mild reaction conditions. The developed catalytic hydrosilylation protocol proceeded with an unusual ppm level (5 ppm) catalyst loading of Co-3 and achieved a maximum turnover number (TON) of 200,000. A wide variety of aromatic, aliphatic, and heterocyclic ketones encompassing both electron-donating and electron-withdrawing substituents were successfully transformed into the desired silyl ethers or secondary alcohols in moderate to excellent yields.

Biomimetic Chemical Reactions with Natural Products Using Metalloporphyrins and Salen Complexes as Catalysts: A Brief Review.

The cytochrome P450 is a superfamily of hemoproteins mainly present in the liver and are versatile biocatalysts. They participate in the primary metabolism and biosynthesis of various secondary metabolites. Chemical catalysts are utilized to replicate the activities of enzymes. Metalloporphyrins and Salen complexes can contribute to the products' characterization and elucidate biotransformation processes, which are investigated during pre-clinical trials. These catalysts also help discover biologically active compounds and get better yields of products of industrial interest. This review aims to investigate which natural product classes are being investigated by biomimetic chemical models and the functionalities applied in the use of these catalysts. A limited number of studies were observed, with terpenes and alkaloids being the most investigated natural product classes. The research also revealed that Metalloporphyrins are still the most popular in the studies, and the identity and yield of the products obtained depend on the reaction system conditions.

Supramolecular clumps of µ2-1,3-acetate bridges of Cd(II)-Salen complex: Synthesis, spectroscopic characterization, crystal structure, DFT quantization's, and antifungal photodynamic therapy.

The article divulges the crystal growth, synthesis, and X-ray structure characterization of one centrosymmetric cadmium complex, [Cd{CdL(µ2-1,3-acetate)}2] using Salen ligand (SL). The complex is further characterized using spectroscopic and analytical techniques, including DRS, SEM-EDX, PXRD, and ICP-MS. The crystallographic study showed that the complex has a monoclinic space P21/c. Addison parameters (Æ®) show the hexagonal geometry of the central Cd(II) metal ion. Hirshfeld surface and 2-D fingerprint confirm supramolecular contacts despite weak C-H⋯O and C-H···π interactions. Energy frameworks, FMOs, global reactivity parameters, MEP, and energy bandgap explain the complex reactivity outlook. The complex inter- and intramolecular bonding interactions were explored through natural bond orbital (NBO), QTAIM, NCI-RDG, Electron Location Function (ELF), and Localized Orbital Locator (LOL) quantization methods. In addition, the complex and its synthetic components in vitro antibacterial efficacy were investigated using Gram-positive and Gram-negative microbial strains. SAR (structure-activity relationship) correlates with biological potency. Molecular docking assessed antimicrobial potency with proteins S. aureus (PDB ID: 1JIJ), C. albicans (PDB ID: 1M7A), E. coli (PDB ID: 1T9U), P. aeruginosa (PDB ID: 2UV0), and A. Niger (PDB ID: 3K4P). The findings are backed by the Protein-Ligand Interaction Profiler (PLIP). The antifungal potency and cell viability test of C. albicans were conducted using photodynamic therapy (APDT).

Microwave-ultrasonic assisted extraction of lignin to synthesize new nano micellar organometallic surfactants for refining oily wastewater.

In this work, a beneficial approach for efficient depolymerization of lignin and controllable product distribution is provided. Lignin, an abundant aromatic biopolymer, has the potential to produce various biofuels and chemical adsorption agents and is expected to benefit the future circular economy. Microwave-ultrasonic (MW/US) assisted efficient depolymerization of lignin affords some aromatic materials used in manufacturing the starting material to be investigated. Some nano organometallic surfactants (NOMS) based on Ni2+, Cu2+, Co2+, Fe3+, and Mn2+ besides 2-hydroxynaphth-sulphanilamide are synthesized to enhance oil recovery (EOR). In this work, the assessment of the NOMS's efficiency was improving the heavy oil recovery via the study of the dynamic interfacial tension (IFT), contact angle, and chemical flooding scenarios. The NOMS-Ni2+ exhibited the maximum reduction of viscosity and yield values. Dropping the viscosity to 819.9, 659.89, and 499.9 Pa s from blank crude oil viscosity of 9978.8, 8005.6, and 5008.6 Pa s respectively at temperatures of 40, 60, and 80 °C was investigated. The reduction of τB values was obtained also by OMS-Ni2+. The minimum IFT was recorded against the Ni2+ derivatives (0.1 × 10-1 mN m-1). The complete wettability alteration was achieved with the NOMS-Ni2+ surfactant (ɵ ≅ 6.01 ) . The flooding test has been steered in 3 sets using the sand-packed model as a porous media at surfactant concentrations (1, 1.5, 2 and 2.5%) at 50 °C and 499 psi as injection pressure. The best value (ORs) formed for NOMS-Ni2+ were 62, 81, 85.2, and 89% respectively as compared with other NOMS-M2+ at the same concentrations. The mechanism of alternating wettability was described in the text. The rheology of the used heavy crude oil was investigated under temperatures of 40, 60, and 80 °C.

Kinetic Resolution Polymerization Enabled Chemical Synthesis of Perfectly Isotactic Polythioesters.

Isotactic polythioesters (PTEs) that are thioester analogs to natural polyhydroxyalkanoates (PHAs) have attracted growing attention due to their distinct properties. However, the development of chemically synthetic methods for preparing isotactic PTEs has long been an intricate endeavour. Herein, we report the successful synthesis of perfectly isotactic PTEs via stereocontrolled ring-opening polymerization. This binaphthalene-salen aluminium (SalBinam-Al) catalyst promoted a robust polymerization of rac-α-substituted-ß-propiothiolactones (rac-BTL and rac-PTL) with highly kinetic resolution, affording perfectly isotactic P(BTL) and P(PTL) with Mn up to 276 kDa. Impressively, the isotactic P(BTL) formed a supramolecular stereocomplex with improved thermal property (Tm=204 °C). Ultimately, this kinetic resolution polymerization enabled the facile isolation of enantiopure (S)-BTL, which could efficiently convert to an important pharmaceutical building block (S)-2-benzyl-3-mercapto-propanoic acid. Isotactic P(PTL) served as a tough and ductile material comparable to the commercialized polyolefins. This synthetic system allowed to access of isotactic PTEs, establishing a powerful platform for the discovery of sustainable plastics.

Schiff Base Functionalized Cellulose: Towards Strong Support-Cobalt Nanoparticles Interactions for High Catalytic Performances.

A new hybrid catalyst consisting of cobalt nanoparticles immobilized onto cellulose was developed. The cellulosic matrix is derived from date palm biomass waste, which was oxidized by sodium periodate to yield dialdehyde and was further derivatized by grafting orthoaminophenol as a metal ion complexing agent. The new hybrid catalyst was characterized by FT-IR, solid-state NMR, XRD, SEM, TEM, ICP, and XPS. The catalytic potential of the nanocatalyst was then evaluated in the catalytic hydrogenation of 4-nitrophenol to 4-aminophenol under mild experimental conditions in aqueous medium in the presence of NaBH4 at room temperature. The reaction achieved complete conversion within a short period of 7 min. The rate constant was calculated to be K = 8.7 × 10-3 s-1. The catalyst was recycled for eight cycles. Furthermore, we explored the application of the same catalyst for the hydrogenation of cinnamaldehyde using dihydrogen under different reaction conditions. The results obtained were highly promising, exhibiting both high conversion and excellent selectivity in cinnamyl alcohol.

Development and synthesis of a novel salen-type ligand based on phenylalanine for Mizoroki-Heck, and S-arylation cross-coupling reactions.

In this article, we introduced a novel salen-type ligand precursor and applied it in the Pd-catalyzed Mizoroki-Heck and Cu-catalyzed S-arylation cross-coupling reactions. For the preparation of this structure, (DL)-phenyl alanine was employed as a starting material. These ligand precursor and related catalytic system can be readily synthesised. Various aryl halides (-I, -Br) and alkenes were applied successfully in this protocol to give the corresponding Mizoroki-Heck cross-coupling and S-arylated products in high to excellent yields.

Practical Epoxidation of Olefins Using Air and Ubiquitous Iron-Based Fluorous Salen Complex.

The epoxidation of olefins by substituting "air" for potentially harmful oxidants was achieved using an oxidation method that integrated a fluorous iron(III) salen catalyst derived from common metals and pivalaldehyde. Several aromatic disubstituted olefins were converted into their corresponding epoxides with high efficiency and quantitative yields. This reaction represents an environmentally friendly oxidation process that utilizes an abundant source of air and employs a readily available metal, iron, in the form of salen complexes, making it an environmentally conscious oxidation reaction.

The prediction of single-molecule magnet properties via deep learning.

This paper uses deep learning to present a proof-of-concept for data-driven chemistry in single-molecule magnets (SMMs). Previous discussions within SMM research have proposed links between molecular structures (crystal structures) and single-molecule magnetic properties; however, these have only interpreted the results. Therefore, this study introduces a data-driven approach to predict the properties of SMM structures using deep learning. The deep-learning model learns the structural features of the SMM molecules by extracting the single-molecule magnetic properties from the 3D coordinates presented in this paper. The model accurately determined whether a molecule was a single-molecule magnet, with an accuracy rate of approximately 70% in predicting the SMM properties. The deep-learning model found SMMs from 20 000 metal complexes extracted from the Cambridge Structural Database. Using deep-learning models for predicting SMM properties and guiding the design of novel molecules is promising.

Ring Opening Polymerization of Six- and Eight-Membered Racemic Cyclic Esters for Biodegradable Materials.

The low percentage of recyclability of the polymeric materials obtained by olefin transition metal (TM) polymerization catalysis has increased the interest in their substitution with more eco-friendly materials with reliable physical and mechanical properties. Among the variety of known biodegradable polymers, linear aliphatic polyesters produced by ring-opening polymerization (ROP) of cyclic esters occupy a prominent position. The polymer properties are highly dependent on the macromolecule microstructure, and the control of stereoselectivity is necessary for providing materials with precise and finely tuned properties. In this review, we aim to outline the main synthetic routes, the physical properties and also the applications of three commercially available biodegradable materials: Polylactic acid (PLA), Poly(Lactic-co-Glycolic Acid) (PLGA), and Poly(3-hydroxybutyrate) (P3HB), all of three easily accessible via ROP. In this framework, understanding the origin of enantioselectivity and the factors that determine it is then crucial for the development of materials with suitable thermal and mechanical properties.

Monomeric copper(II) complexes with unsymmetrical salen environment: Synthesis, characterization and study of biological activities.

Three new ONNO-donor tetradentate unsymmetrical salen ligands were synthesized by using o-phenyl diamine with substituted salicylaldehydes followed by a two-step reaction methodology. These three ligands by reaction with Cu(OAc)2.4H2O produced three new monomeric Cu(II) complexes, [CuII(L1-3)] (1-3). Elemental analysis, IR, UV-vis, NMR, and HR-ESI-MS techniques were used to analyze and characterize all the synthesized ligands and their corresponding metal complexes. Molecular structures of 1-3 were confirmed by the single-crystal-XRD analysis. Furthermore, the DNA binding ability of these complexes was checked through UV-vis, fluorescence spectroscopy, and also by circular dichroism studies. All the complexes were found to show an intercalation mode of binding with the Kb value in the range of 104-105 M-1. Finally, 1-3 was tested against two malignant (HeLa and A549) and non-cancerous (NIH-3T3) cell lines to check their in vitro antiproliferative activities. Among all, 1 is the most cytotoxic of the series having IC50 values of 5.7 ± 0.9 and 6.0 ± 0.3 µM against HeLa and A549 cell lines, respectively. This result is also consistent with the DNA binding order. Furthermore, the apoptotic mode of cell death of all the complexes was also evaluated by DAPI, AO/EB, and Annexin V-FITC/PI double staining assays.

Stereoselective Ring-opening Polymerization of S-Carboxyanhydrides Using Salen Aluminum Catalysts: A Route to High-Isotactic Functionalized Polythioesters.

Polythioesters are important sustainable polymers with broad applications. The ring-opening polymerization (ROP) of S-Carboxyanhydrides (SCAs) can afford polythioesters with functional groups that are typically difficult to prepare by ROP of thiolactones. Typical methods involving organocatalysts, like dimethylaminopyridine (DMAP) and triethylamine (Et3 N), have been plagued by uncontrolled polymerization, including epimerization for most SCAs resulting in the loss of isotacticity. Here, we report the use of salen aluminum catalysts for the selective ROP of various SCAs without epimerization, affording functionalized polythioester with high molecular weight up to 37.6 kDa and the highest Pm value up to 0.99. Notably, the ROP of TlaSCA (SCA prepared from thiolactic acid) generates the first example of a isotactic crystalline poly(thiolactic acid), which exhibited a distinct Tm value of 152.6 °C. Effective ligand tailoring governs the binding affinity between the sulfide chain-end and the metal center, thereby maintaining the activity of organometallic catalysts and reducing the occurrence of epimerization reactions.

Altering the Localization of an Unpaired Spin in a Formal Ni(V) Species.

The participation of both ligand and the metal center in the redox events has been recognized as one of the ways to attain the formal high valent complexes for the late 3d metals, such as Ni and Cu. Such an approach has been employed successfully to stabilize a Ni(III) bisphenoxyl diradical species in which there exist an equilibrium between the ligand and the Ni localized resultant spin. The present work, however, broadens the scope of the previously reported three oxidized equivalent species by conveying the approaches that tend to affect the reported equilibrium in CH3 CN at 233 K. Various spectroscopic characterization revealed that employing exogenous N-donor ligands like 1-methyl imidazole and pyridine favors the formation of the Ni centered localized spin though axial binding. In contrast, due to its steric hinderance, quinoline favors an exclusive ligand localized radical species. DFT studies shed light on the novel intermediates' complex electronic structure. Further, the three oxidized equivalent species with the Ni centered spin was examined for its hydrogen atom abstraction ability stressing their key role in alike reactions.

New Glycosalen-Manganese(III) Complexes and RCA120 Hybrid Systems as Superoxide Dismutase/Catalase Mimetics.

Reactive oxygen species are implicated in several human diseases, including neurodegenerative disorders, cardiovascular dysfunction, inflammation, hereditary diseases, and ageing. MnIII-salen complexes are superoxide dismutase (SOD) and catalase (CAT) mimetics, which have shown beneficial effects in various models for oxidative stress. These properties make them well-suited as potential therapeutic agents for oxidative stress diseases. Here, we report the synthesis of the novel glycoconjugates of salen complex, EUK-108, with glucose and galactose. We found that the complexes showed a SOD-like activity higher than EUK-108, as well as peroxidase and catalase activities. We also investigated the conjugate activities in the presence of Ricinus communis agglutinin (RCA120) lectin. The hybrid protein-galactose-EUK-108 system showed an increased SOD-like activity similar to the native SOD1.

Building Porous Ni(Salen)-Based Catalysts from Waste Styrofoam via Autocatalytic Coupling Chemistry for Heterogeneous Oxidation with Molecular Oxygen.

The development of robust and industrially viable catalysts from plastic waste is of great significance, and the facile construction of high performance heterogeneous catalyst systems for phenol-quinone conversions remains a grand challenge. Herein, a feasible strategy is demonstrated to reclaim Styrofoam into hierarchically porous nickel-salen-loaded hypercrosslinked polystyrene (PS@Ni-salen) catalysts with high activities through an unusual autocatalytic coupling route. The salen is immobilized onto PS chain by Friedel-Crafts alkylation of benzyl chloride derivatives, and the generated hydrogen chloride coordinately promotes the simultaneous crosslinking and bridge formation between aromatic rings via a Scholl coupling route, leading to hierarchically porous networks. After the metallization with Ni, the resultant networks exhibit high catalytic activity for the oxidation of 2,3,6-trimethylphenol to 2,3,5-trimethyl-1,4-benzoquinone under mild conditions (303 K, 1 bar of O2 ). This catalyst also demonstrates attractive recycling performance without an obvious loss of catalytic efficiency over five consecutive cycles. This methodology might provide a potential sustainable alternative to construct environmentally benign and cost-effective catalysts for specific organic transformation.

A fluorescent Salamo-Salen-Salamo-Zn(II) sensor for bioimaging and biosensing H2PO4- in Zebrafish and plants.

A newly designed and synthesized Salamo-Salen-Salamo-Zn(II) complex sensor (sensor ZT) was extensively explored for anion sensing studies. The selectivity and sensitivity of the sensor ZT towards H2PO4- ions were based on ICT and CHEF effects, and via displacement pathways in DMSO/H2O (9:1, v/v) medium in the presence of other anions like, PO43-, HPO42- and P2O74- in a short time, separately. The prepared ZT sensor has excellent association constant and low detection lines. The sensing mechanism and binding mode of the sensor were studied by UV-Vis spectroscopy, HR-MS, 1H NMR titration and theory calculations (DFT & TD-DFT) for analytes. The time response and stability of the sensor are also given. Meanwhile, the sensor ZT can be widely used as a simple and effective solid-state optical sensor to detect H2PO4- by intuitive fluorescence changes. In addition, besides the environment can be used as a powerful instrument for detecting H2PO4-, based on the good biocompatibility and tissue permeability of ZT, effectively monitoring H2PO4- in cellular distribution by confocal microscopy using Zebrafish and bean sprout.

High-Glass-Transition Polyesters Produced with Phthalic Anhydride and Epoxides by Ring-Opening Copolymerization (ROCOP).

Polyesters with a high glass transition temperature above 130 °C were obtained from limonene oxide (LO) or vinylcyclohexene oxide (VCHO) and phthalic anhydride (PA) in the presence of commercial salen-type complexes with different metals-Cr, Al, and Mn-as catalysts in combination with 4-(dimethylamino) pyridine (DMAP), bis-(triphenylphosphorydine) ammonium chloride (PPNCl), and bis-(triphenylphosphoranylidene)ammonium azide (PPNN3) as cocatalysts via alternating ring-opening copolymerization (ROCOP). The effects of the time of precontact between the catalyst and cocatalyst and the polymerization time on the productivity, molar mass (Mw), and glass transition temperature (Tg) were evaluated. The polyesters were characterized by a molar mass (Mw) of up to 14.0 kg/mol, a narrow dispersity Tg of up to 136 °C, and low (<3 mol%) polyether units. For poly(LO-alt-PA) copolymers, biodegradation tests were performed according to ISO 14851 using the respirometric biochemical oxygen demand method. Moreover, the vinyl double bond present in the poly(LO-alt-PA) copolymer chain was functionalized using three different thiols, methyl-3-mercaptopropionate, isooctyl-3-mercaptopropionate, and butyl-3-mercaptopropionate, via a click chemistry reaction. The thermal properties of poly(LO-alt-PA), poly(VCHO-alt-PA) and thiol-modified poly(LO-alt-PA) copolymers were extensively studied by DSC and TGA. Some preliminary compression molding tests were also conducted.

Enantioselective radical cascade cyclization via Ti-catalyzed redox relay.

Radical cascade cyclization reactions provide an efficient method for the construction of polycyclic architectures with multiple stereogenic centers. However, achieving enantioselectivity control of this type of reaction is a challenging task. Here, we report an enantioselective cyclization of polyfunctional aryl cyclopropyl ketone and alkyne units, wherein the stereochemical outcome is directed by a chiral Ti(salen) catalyst. This transformation was proposed to proceed via a radical cascade process involving the reductive ring-opening of the cyclopropyl ketone followed by two annulation events entailing cyclization of the ensuing alkyl radical onto the alkyne and subsequent addition of the incipient vinyl radical to the Ti(IV)-enolate.