RESUMEN
Prussian blue analogues receive tremendous attention owing to their spacious three-dimensional skeleton, high theoretical specific capacity, facile synthesis procedure, and high cost-effectiveness as among the most promising candidates for cathode materials in sodium-ion batteries (SIBs). Nonetheless, the practical specific capacity, especially under high current, is particularly frail due to the sluggish ion diffusion. In this study, the strategy of Ni substitution and formation of water-coordinated Fe is applied to lower the crystal field energy and elevate the active low-spin (LS) Fe content, which leads to a capacitive sodium storage mechanism, resulting in a substantial specific capacity under high current density. The delivered specific capacity of PW-325@2NiFe-55 is 95 mAh g-1 at 50 C, which is 72.5% capacity retention of the one at 0.5 C. Also, it maintains 80.2% of its initial specific capacity after 500 cycles at 5 C. Furthermore, a hypothesis of a joint diffusion-controlled and capacitive mechanism for high-spin (HS) Fe and a mere capacitive mechanism for LS Fe is put forward and verified through potentiastatic tests, operando 57Fe Mössbauer spectroscopy, and ex situ XRD, which provides a new horizon to enhance the electrochemical performance for SIBs.
RESUMEN
Closed pores play a crucial role in improving the low-voltage (<0.1 V) plateau capacity of hard carbon anodes for sodium-ion batteries (SIBs). However, the lack of simple and effective closed-pore construction strategies, as well as the unclear closed-pore formation mechanism, has severely hindered the development of high plateau capacity hard carbon anodes. Herein, we present an effective closed-pore construction strategy by one-step pyrolysis of zinc gluconate (ZG) and elucidate the corresponding mechanism of closed-pore formation. The closed-pore formation mechanism during the pyrolysis of ZG mainly involves (i) the precipitation of ZnO nanoparticles and the ZnO etching on carbon under 1100 °C to generate open pores of 0.45-4 nm and (ii) the development of graphitic domains and the shrinkage of the partial open pores at 1100-1500 °C to convert the open pores to closed pores. Benefiting from the considerable closed-pore content and suitable microstructure, the optimized hard carbon achieves an ultrahigh reversible specific capacity of 481.5 mA h g-1 and an extraordinary plateau capacity of 389 mA h g-1 for use as the anode of SIBs. Additionally, some in situ and ex situ characterizations demonstrate that the high-voltage slope capacity and the low-voltage plateau capacity stem from the adsorption of Na+ at the defect sites and Na-cluster formation in closed pores, respectively.
RESUMEN
Hard carbon as a negative electrode material for sodium-ion batteries (SIBs) has great commercial potential and has been widely studied. The sodium-ion intercalation in graphite domains and the filling of closed pores in the low voltage platform region still remain a subject of controversy. We have successfully constructed hard carbon materials with a pseudo-graphitic structure by using polymerizable p-phenylenediamine and dichloromethane as carbon sources. This was achieved by a halogenated amination reaction and oxidative polymerization. It was found that the capacity of hard carbon materials mainly originates from intercalation into graphite domains. The study found that the prepared hard carbon could store 339.33 mAh g-1 of sodium in a reversible way at a current density of 25 mA g-1, and it had an initial coulomb efficiency of 80.23%. It even maintained a reversible sodium storage capacity of 125.53 mAh g-1 at a high current density of 12.8 A g-1. Based on the analysis of hard carbon structure and electrochemical performance, it was shown that the materials conform with an "adsorption-intercalation" mechanism for sodium storage.
RESUMEN
Na3V2(PO4)3 (NVP) based on the multielectron reactions between V2+ and V5+ has been considered a promising cathode for sodium-ion batteries (SIBs). However, it still suffers from unsatisfactory stability, caused by the poor reversibility of the V5+/V4+ redox couple and structure evolution. Herein, we propos a strategy that combines high-entropy substitution and electrolyte optimization to boost the reversible multielectron reactions of NVP. The high reversibility of the V5+/V4+ redox couple and crystalline structure evolution are disclosed by in situ X-ray absorption near-edge structure spectra and in situ X-ray diffraction. Meanwhile, the electrochemical reaction kinetics of high-entropy substitution NVP (HE-NVP) can be further improved in the diglyme-based electrolyte. These enable HE-NVP to deliver a superior electrochemical performance (capacity retention of 93.1% after 2000 cycles; a large reversible capacity of 120 mAh g-1 even at 5.0 A g-1). Besides, the long cycle life and high power density of the HE-NVPâ¥natural graphite full-cell configuration demonstrated the superiority of HE-NVP cathode in SIBs. This work highlights that the synergism of high-entropy substitution and electrolyte optimization is a powerful strategy to enhance the sodium-storage performance of polyanionic cathodes for SIBs.
RESUMEN
While cost-effective sodium-ion batteries (SIBs) with crystalline silicon anodes promise high theoretical capacities, they perform poorly because silicon stores sodium ineffectively (capacity <40 mAh g-1 ). To address this issue, herein an atomic-order structural-design tactic is adopted for obtaining unique multilevel gradient-ordered silicon (MGO-Si) by simple electrochemical reconstruction. In situ-formed short-range-, medium-range-, and long-range-ordered structures construct a stable MGO-Si, which contributes to favorable Na-Si interaction and fast ion diffusion channels. These characteristics afford a high reversible capacity (352.7 mAh g-1 at 50 mA g-1 ) and stable cycling performance (95.2% capacity retention after 4000 cycles), exhibiting record values among those reported for pure silicon electrodes. Sodium storage of MGO-Si involves an adsorption-intercalation mechanism, and a stepwise construction strategy of gradient-ordered structure further improves the specific capacity (339.5 mAh g-1 at 100 mA g-1 ). Reconstructed Si/C composites show a high reversible capacity of 449.5 mAh g-1 , significantly better than most carbonaceous anodes. The universality of this design principle is demonstrated for other inert or low-capacity materials (micro-Si, SiO2 , SiC, graphite, and TiO2 ), boosting their capacities by 1.5-6 times that of pristine materials, thereby providing new solutions to facilitate sodium storage capability for better-performing battery designs.
RESUMEN
Although hard carbon (HC) demonstrates superior initial Coulombic efficiency, cycling durability, and rate capability in ether-based electrolytes compared to ester-based electrolytes for sodium-ion batteries (SIBs), the underlying mechanisms responsible for these disparities remain largely unexplored. Herein, ex situ electron paramagnetic resonance (EPR) spectra and in situ Raman spectroscopy are combined to investigate the Na storage mechanism of HC under different electrolytes. Through deconvolving the EPR signals of Na in HC, quasi-metallic-Na is successfully differentiated from adsorbed-Na. By monitoring the evolution of different Na species during the charging/discharging process, it is found that the initial adsorbed-Na in HC with ether-based electrolytes can be effectively transformed into intercalated-Na in the plateau region. However, this transformation is obstructed in ester-based electrolytes, leading to the predominant storage of Na in HC as adsorbed-Na and pore-filled-Na. Furthermore, the intercalated-Na in HC within the ether-based electrolytes contributes to the formation of a uniform, dense, and stable solid-electrolyte interphase (SEI) film and eventually enhances the electrochemical performance of HC. This work successfully deciphers the electrolyte-dominated Na+ storage mechanisms in HC and provides fundamental insights into the industrialization of HC in SIBs.
RESUMEN
Building a stable and controllable interlayer structure is the key to improving the sodium storage cycling stability and rate performance of two-dimensional anode materials. This study explored the rich functional groups in bacterial cellulose culture medium in the way of biological self-assembly. Mo precursors were used to produce chemical bond in bacterial cellulose culture medium, and intercalation groups are introduced to achieve MoS2 localized nucleation and inâ situ localized construction of carbon intercalation stable interlaminar structure, thus improving ion transport dynamics and cycle stability. In order to avoid structural irreversibility of MoS2 at low potential, an extended voltage window of 1.5-4â V was selected for lithium/sodium intercalation testing. It was found that there was a significant improvement in sodium storage capacity and stability. During the electrochemical cycling process, in-situ Raman testing revealed that the structure of MoS2 was completely reversible, and the intensity changes of MoS2 characteristic peaks showed in-plane vibration without involving interlayer bonding fracture. Moreover, after the lithium sodium was removed from the intercalation C@MoS2 all structures have good retention.
RESUMEN
Hard carbon is generally accepted as the choice of anode material for sodium-ion batteries. However, integrating high capacity, high initial Coulombic efficiency (ICE), and good durability in hard carbon materials remains challenging. Herein, N-doped hard carbon microspheres (NHCMs) with abundant Na+ adsorption sites and tunable interlayer distance are constructed based on the amine-aldehyde condensation reaction using m-phenylenediamine and formaldehyde as the precursors. The optimized NHCM-1400 with a considerable N content (4.64%) demonstrates a high ICE (87%), high reversible capacity with ideal durability (399 mAh g-1 at 30 mA g-1 and 98.5% retention over 120 cycles), and decent rate capability (297 mAh g-1 at 2000 mA g-1 ). In situ characterizations elucidate the adsorption-intercalation-filling sodium storage mechanism of NHCMs. Theoretical calculation reveals that the N-doping decreases the Na+ adsorption energy on hard carbon.
RESUMEN
Hard Carbon have become the most promising anode candidates for sodium-ion batteries, but the poor rate performance and cycle life remain key issues. In this work, N-doped hard carbon with abundant defects and expanded interlayer spacing is constructed by using carboxymethyl cellulose sodium as precursor with the assistance of graphitic carbon nitride. The formation of N-doped nanosheet structure is realized by the CN⢠or CC⢠radicals generated through the conversion of nitrile intermediates in the pyrolysis process. This greatly enhances the rate capability (192.8 mAh g-1 at 5.0 A g-1 ) and ultra-long cycle stability (233.3 mAh g-1 after 2000 cycles at 0.5 A g-1 ). In situ Raman spectroscopy, ex situ X-ray diffraction and X-ray photoelectron spectroscopy analysis in combination with comprehensive electrochemical characterizations, reveal that the interlayer insertion coordinated quasi-metallic sodium storage in the low potential plateau region and adsorption storage in the high potential sloping region. The first-principles density functional theory calculations further demonstrate strong coordination effect on nitrogen defect sites to capture sodium, especially with pyrrolic N, uncovering the formation mechanism of quasi-metallic bond in the sodium storage. This work provides new insights into the sodium storage mechanism of high-performance carbonaceous materials, and offers new opportunities for better design of hard carbon anode.
RESUMEN
Sodium-ion batteries (SIBs) are promising alternatives for large-scale energy storage owing to the rich resource and cost effectiveness. However, there are limitations of suitable low-cost, high-rate cathode materials for fast charging and high-power delivery in grid systems. Herein, a biphasic tunnel/layered 0.80Na0.44 MnO2 /0.20Na0.70 MnO2 (80T/20L) cathode delivering exceptional rate performance through subtly regulating the sodium and manganese stoichiometry is reported. It delivers a reversible capacity of 87 mAh g-1 at 4 A g-1 (33 C), much higher than that of tunnel Na0.44 MnO2 (72 mAh g-1 ) and layered Na0.70 MnO2 (36 mAh g-1 ). It proves that the one-pot synthesized 80T/20L is able to suppress the deactivation of L-Na0.70 MnO2 under air-exposure, which improves the specific capacity and cycling stability. Based on electrochemical kinetics analysis, the electrochemical storage of 80T/20L is mainly based on pseudocapacitive surface-controlled process. The thick film of 80T/20L cathode (a single-side mass loading over 10 mg cm-2 ) also has superior properties of pseudocapacitive response (over 83.5% at a low sweep rate of 1 mV s-1 ) and excellent rate performance. In this sense, the 80T/20L cathode with outstanding comprehensive performance could meet the requirements of high-performance SIBs.
RESUMEN
With the associated advantages of low costs and abundant resources, sodium-ion capacitors (SICs) present a suitable means for large-scale energy storage. However, their practical application is still significantly limited by the sluggish electrochemical reaction kinetics of battery-type anodes. Herein, the nitrogen-doped carbon-encapsulated Fe7Se8 nanorods (Fe7Se8@NC) with a core-shell structure were prepared via an in-situ self-polymerization and carbonization-selenization approach, which improves ion transport and maintains the structural stability of the nanorods. The designed Fe7Se8@NC nanorods exhibit desirable rate capability with a capacity of 290.7 mAh/g at 10 A/g and long-term cyclability with 84.6 % retention over 6000 cycles at 5 A/g. Moreover, research has shown that the diffusion dynamics of Na+ is improved in ether-based electrolytes and that the irreversible reactions at low voltages can be inhibited by a high discharge cut-off voltage. Furthermore, we demonstrated the specific sodium storage mechanism and excellent electrochemical reversibility of the Fe7Se8@NC electrode through in-situ and ex-situ characterization techniques. As expected, the assembled SICs with the Fe7Se8@NC anode and active carbon cathode deliver prominent energy/power densities and an ultra-long cycle life over 5000 cycles, shedding new light on the design of transition metal dichalcogenides as anode materials for advanced energy storage systems.
RESUMEN
Disordered carbons as the most promising anode materials for sodium ion batteries (SIBs) have attracted much attention, due to the widely-distributed sources and potentially high output voltage when applied in full cells owing to the almost lowest voltage plateau. The complex microstructure makes the sodium storage mechanism of disordered carbons controversial. Recently, many studies show that the plateau region of disordered carbons are closely related to the embedment of sodium ion/semimetal in nanopores. In this regard, the classification, characterization and construction of nanopores are exhaustively discussed in this review. In addition, perspectives about the controllable construction of nanopores are presented in the last section, aiming to catch out more valuable studies include not only the construction of closed pores to enhance capacity but also the design of carbon materials to understand Na storage mechanism.
Asunto(s)
Suministros de Energía Eléctrica , Sodio , Sodio/química , Electrodos , Iones/química , CarbonoRESUMEN
Developing hard carbon with a high initial Coulombic efficiency (ICE) and very good cycling stability is of great importance for practical sodium-ion batteries (SIBs). Defects and oxygen-containing groups grown along either the carbon edges or the layers, however, are inevitable in hard carbon and can cause a tremendous density of irreversible Na+ sites, decreasing the efficiency and therefore causing failure of the battery. Thus, eliminating these unexpected defect structures is significant for enhancing the battery performance. Herein, we develop a strategy of applying a soft-carbon coating onto free-standing hard-carbon electrodes, which greatly hinders the formation of defects and oxygen-containing groups on hard carbon. The electrochemical results show that the soft-carbon-coated, free-standing hard-carbon electrodes can achieve an ultrahigh ICE of 94.1% and long cycling performance (99% capacity retention after 100 cycles at a current density of 20 mA g-1), demonstrating their great potential in practical sodium storage systems. The sodium storage mechanism was also investigated by operando Raman spectroscopy. Our sodium storage mechanism extends the "adsorption-intercalation-pore filling-deposition" model. We propose that the pore filling in the plateau area might be divided into two parts: (1) sodium could fill in the pores near the inner wall of the carbon layer; (2) when the sodium in the inner wall pores is close to saturation, the sodium could be further deposited onto the existing sodium.
RESUMEN
Bi2Se3 was studied as a novel sodium-ion battery anode material because of its high theoretical capacity and high intrinsic conductivity. Integrated with carbon, Bi2Se3/C composite shows excellent cyclic performance and rate capability. For instance, the Bi2Se3/C anode delivers an initial capacity of 527 mAh g-1 at 0.1 A g-1 and maintains 89% of this capacity over 100 cycles. The phase change and sodium storage mechanism are also carefully investigated.
RESUMEN
Silver molybdate, Ag2 Mo2 O7 , has been prepared by a conventional solid-state reaction. Its electrochemical properties as an anode material for sodium-ion batteries (SIBs) have been comprehensively examined by means of galvanostatic charge-discharge cycling, cyclic voltammetry, and rate performance measurements. At operating voltages between 3.0 and 0.01â V, the electrode delivered a reversible capacity of nearly 190â mA h g(-1) at a current density of 20â mA g(-1) after 70 cycles. Ag2 Mo2 O7 also demonstrated a good rate capability and long-term cycle stability, the capacity reaching almost 100â mA h g(-1) at a current density of 500â mA g(-1) , with a capacity retention of 55 % over 1000 cycles. Moreover, the sodium storage process of Ag2 Mo2 O7 has been investigated by means of ex situ XRD, Raman spectroscopy, and HRTEM. Interestingly, the anode decomposes into Ag metal and Na2 MoO4 during the initial discharge process, and then Na(+) ions are considered to be inserted into/extracted from the Na2 MoO4 lattice in the subsequent cycles governed by an intercalation/deintercalation mechanism. Ex situ HRTEM images revealed that Ag metal not only remains unchanged during the sodiation/desodiation processes, but is well dispersed throughout the amorphous matrix, thereby greatly improving the electronic conductivity of the working electrode. The "in situ" decomposition behavior of Ag2 Mo2 O7 is distinct from that of chemically synthesized, metal-nanoparticle-coated electrode materials, and provides strong supplementary insight into the mechanism of such new anode materials for SIBs and may set a precedent for the design of further materials.