Influence mechanism of the temporal duration of laser irradiation on photoacoustic technique: a review.

Significance: In the photoacoustic (PA) technique, the laser irradiation in the time domain (i.e., laser pulse duration) governs the characteristics of PA imaging-it plays a crucial role in the optical-acoustic interaction, the generation of PA signals, and the PA imaging performance. Aim: We aim to provide a comprehensive analysis of the impact of laser pulse duration on various aspects of PA imaging, encompassing the signal-to-noise ratio, the spatial resolution of PA imaging, the acoustic frequency spectrum of the acoustic wave, the initiation of specific physical phenomena, and the photothermal-PA (PT-PA) interaction/conversion. Approach: By surveying and reviewing the state-of-the-art investigations, we discuss the effects of laser pulse duration on the generation of PA signals in the context of biomedical PA imaging with respect to the aforementioned aspects. Results: First, we discuss the impact of laser pulse duration on the PA signal amplitude and its correlation with the lateral resolution of PA imaging. Subsequently, the relationship between the axial resolution of PA imaging and the laser pulse duration is analyzed with consideration of the acoustic frequency spectrum. Furthermore, we examine the manipulation of the pulse duration to trigger physical phenomena and its relevant applications. In addition, we elaborate on the tuning of the pulse duration to manipulate the conversion process and ratio from the PT to PA effect. Conclusions: We contribute to the understanding of the physical mechanisms governing pulse-width-dependent PA techniques. By gaining insight into the mechanism behind the influence of the laser pulse, we can trigger the pulse-with-dependent physical phenomena for specific PA applications, enhance PA imaging performance in biomedical imaging scenarios, and modulate PT-PA conversion by tuning the pulse duration precisely.

Generalized thermomechanical interaction in two-dimensional skin tissue using eigenvalues approach.

The aim of this work is to analytically study the thermo-mechanical response of two-dimensional skin tissues when subjected to instantaneous heating. A complete understanding of the heat transfer process and the associated thermal and mechanical effects on the patient's skin tissues is critical to ensuring the effective applications of thermal therapy techniques and procedures. The surface boundary of the half-space undergoes a heat flux characterized by an exponentially decaying pulse, while maintaining a condition of zero traction. The utilization of Laplace and Fourier transformations is employed, and the resulting formulations are then applied to human tissues undergoing regional hyperthermia treatment for cancer therapy. To perform the inversion process for Laplace and Fourier transforms, a numerical programming method based on Stehfest numerical inverse method is employed. The findings demonstrate that blood perfusion rate and thermal relaxation time significantly influence all the analyzed distributions. Numerical findings suggest that thermo-mechanical waves propagate through skin tissue over finite distances, which helps mitigate the unrealistic predictions made by the Pennes' model.

In Situ Photoisomerization of an Azobenzene-Based Triple Helicate with a Prolonged Thermal Relaxation Time.

The phosphate-coordination triple helicates A2 L3 (A=anion) with azobenzene-spaced bis-bis(urea) ligands (L) have proven to undergo a rare in situ photoisomerization (without disassembly of the structure) rather than the typically known, stepwise "disassembly-isomerization-reassembly" process. This is enabled by the structural self-adaptability of the "aniono" assembly arising from multiple relatively weak and flexible hydrogen bonds between the phosphate anion and bis(urea) units. Notably, the Z→E thermal relaxation rate of the isomerized azobenzene unit is significantly decreased (up to 20-fold) for the triple helicates compared to the free ligands. Moreover, the binding of chiral guest cations inside the cavity of the Z-isomerized triple helicate can induce optically pure diastereomers, thus demonstrating a new strategy for making light-activated chiroptical materials.

Ablative Laser Therapy of Skin.

Laser skin rejuvenation was introduced in the mid-1990s. Early ablative laser devices relied on scanner technology that provided significant ablation and longer time on tissue treatments. These early treatments provided significant improvement in the appearance of the skin, but because of the longer treatment times and in some cases excessive treatment, complications such as scarring and hypopigmentation were significant. More recent advances in skin resurfacing technology have now minimized these risks providing certain key principles are observed. These parameters are reviewed in detail to improve the reader's ability to propose and execute proper skin resurfacing treatments.

Influence of thermal relaxation time on thermomechanical interactions in biological tissue during hyperthermia treatment.

This study presents an analytical analysis of thermo-mechanical interactions within living tissues using a generalized biothermoelastic model with one thermal relaxation time. Utilizing Laplace transforms and associated techniques, we investigate the response of living tissue to a pulse boundary heat flux that decays exponentially on a traction-free surface. Through detailed graphical illustrations, we elucidate the influence of key parameters such as thermal relaxation time, blood perfusion rate, and the characteristic time of the pulsing heat flux on temperature distribution, displacement, and thermal strain. Our results are presented through comprehensive graphical representations. Furthermore, a parametric analysis is conducted to guide the selection of optimal design factors, enhancing the accuracy of hyperthermia treatments.

Conformational change in an engineered biliverdin-binding cyanobacteriochrome during the photoconversion process.

Cyanobacteriochromes (CBCRs) derived from cyanobacteria are linear-tetrapyrrole-binding photoreceptors related to the canonical red/far-red reversible phytochrome photoreceptors. CBCRs contain chromophore-binding cGMP-specific phosphodiesterase/adenylate cyclase/FhlA (GAF) domains that are highly diverse in their primary sequences and are categorized into many subfamilies. Among this repertoire, the biliverdin (BV)-binding CBCR GAF domains receive considerable attention for their in vivo optogenetic and bioimaging applications because BV is a mammalian intrinsic chromophore and can absorb far-red light that penetrates deep into the mammalian body. The typical BV-binding CBCR GAF domain exhibits reversible photoconversion between far-red-absorbing dark-adapted and orange-absorbing photoproduct states. Herein, we applied various biochemical and spectral studies to identify the details of the conformational change during this photoconversion process. No oligomeric state change was observed, whereas the surface charge would change with a modification of the α-helix structures during the photoconversion process. Combinatorial analysis using partial protease digestion and mass spectrometry identified the region where the conformational change occurred. These results provide clues for the future development of optogenetic tools.

Novel Azocoumarin Derivatives-Synthesis and Characterization.

The paper presents synthesis and characterization of nine new thiazolyl-(phenyldiazenyl)-2H-chromen-2-one dyes. The impact of substituent structure in thiazole ring in the synthesized azocoumarin derivatives on electrochemical properties, photoisomerization process and photovoltaic response was examined. The dyes were electrochemically active and undergo reduction and oxidation processes. They showed low electrochemically estimated energy band gap in the range of 1.71-2.13 eV. Photoisomerization process of the synthesized molecules was studied in various solvents such as ethanol, chloroform and N,N-dimethylformamide (DMF) upon the UV illumination. It was found that novel azodyes showed reversible trans-cis-trans isomerization and exhibited long thermal back to the trans form, that was even 7 days in DMF. Selected azocoumarin were molecularly dispersed in polystyrene for preparation of guest-host azopolymer systems to study the cis-trans thermal isomerization of obtained dyes in solid state. The photovoltaic activity of the azochromophores was tested in bulk-heterojunction solar cells. They acting as weak donors in device with structure ITO/PEDOT:PSS/dye:PC70BM/Al. No photovoltaic response of cells with azocoumarin derivatives bearing 4-fluorobenzene, 3,4-dichlorobenzene, or 4-(1-adamantyl) unit was found. Additionally, dye which showed the best activity was examined in three-component solar cells ITO/PEDOT:PSS/PTB7:PC70BM:dye/PFN/Al.

Analysis of Thermoelastic Interaction in a Polymeric Orthotropic Medium Using the Finite Element Method.

In this work, the finite element technique is employed to evaluate the effects of thermal relaxation durations on temperature, displacements, and stresses in a two-dimensional, polymeric, orthotropic, elastic medium. The problem is considered in a homogeneous, polymeric, orthotropic medium in the context of the Green and Lindsay model with two thermal relaxation times. The bounding surface of the half-space was subjected to a heat flux with an exponentially decaying pulse. Finite element techniques were used to solve the governing formulations, with eight-node isoparametric rectangular elements with three degrees of freedom (DOF) per node. The developed method was calculated using numerical results applied to the polymeric, orthotropic medium. The findings were implemented and visually shown. Finally, the results were displayed to demonstrate the differences between classical dynamic coupling (CT), the Lord-Shulman (LS) and the Green and Lindsay (GL) models.

Anomalous heating in a colloidal system.

We report anomalous heating in a colloidal system, an experimental observation of the inverse Mpemba effect, where for two initial temperatures lower than the temperature of the thermal bath, the colder of the two systems heats up faster when coupled to the same thermal bath. For an overdamped, Brownian colloidal particle moving in a tilted double-well potential, we find a nonmonotonic dependence of the heating times on the initial temperature of the system. Entropic effects make the inverse Mpemba effect generically weaker-harder to observe-than the usual Mpemba effect (anomalous cooling). We also observe a strong version of anomalous heating, where a cold system heats up exponentially faster than systems prepared under slightly different conditions.

Numerical Study on Generalized Heat and Mass in Casson Fluid with Hybrid Nanostructures.

The rheological model for yield stress exhibiting fluid and the basic laws for fluid flow and transport of heat and mass are used for the formulation of problems associated with the enhancement of heat and mass due to dispersion of nanoparticles in Casson. The heat and mass transfer obey non-Fourier's laws and the generalized Fick's law, respectively. Model problems are incorporated by thermal relaxation times for heat and mass. Transfer of heat energy and relaxation time are inversely proportional, and the same is the case for mass transport and concentration relaxation time. A porous medium force is responsible for controlling the momentum thickness. The yield stress parameter and diffusion of momentum in Casson fluid are noticed to be inversely proportional with each other. The concentration gradient enhances the energy transfer, and temperature gradient causes an enhancement diffusion of solute in Casson fluid. FEM provides convergent solutions. The relaxation time phenomenon is responsible for the restoration of thermal and solutal changes. Due to that, the thermal and solutal equilibrium states can be restored. The phenomenon of yield stress is responsible for controlling the momentum boundary layer thickness. A porous medium exerts a retarding force on the flow, and therefore, a deceleration in flow is observed. The thermal efficiency of MoS2-SiO2-Casson fluid is greater than the thermal efficiency of SiO2-Casson fluid.

Optoacoustic Sensing of Surfactant Crude Oil in Thermal Relaxation and Nonlinear Regimes.

We propose a laser optoacoustic method for the complex characterization of crude oil pollution of the water surface by the thickness of the layer, the speed of sound, the coefficient of optical absorption, and the temperature dependence of the Grüneisen parameter. Using a 532 nm pulsed laser and a 1-100 MHz ultra-wideband ultrasonic antenna, we have demonstrated the capability of accurate (>95%) optoacoustic thickness measurements in the 5 to 500-micron range, covering 88% of slicks observed during 2010 oil spill in the Gulf of Mexico. In the thermal relaxation regime of optoacoustic measurements, the value of optical absorption coefficient (30 mm-1) agreed with the data of independent spectrophotometric measurements, while the sound speed (1430 m/s) agreed with the tabular data. When operating in a nonlinear regime, the effect of local deformation of the surface of the oil film induced by heating laser radiation was revealed. The dose-time parameters of laser radiation ensuring the transition from the thermal relaxation regime of optoacoustic generation to nonlinear one were experimentally investigated. The developed OA method has potential for quantitative characterization of not only the volume, but also the degree and even the type of oil pollution of the water surface.

Significant Involvement of Double Diffusion Theories on Viscoelastic Fluid Comprising Variable Thermophysical Properties.

This report examines the heat and mass transfer in three-dimensional second grade non-Newtonian fluid in the presence of a variable magnetic field. Heat transfer is presented with the involvement of thermal relaxation time and variable thermal conductivity. The generalized theory for mass flux with variable mass diffusion coefficient is considered in the transport of species. The conservation laws are modeled in simplified form via boundary layer theory which results as a system of coupled non-linear partial differential equations. Group similarity analysis is engaged for the conversion of derived conservation laws in the form of highly non-linear ordinary differential equations. The solution is obtained vial optimal homotopy procedure (OHP). The convergence of the scheme is shown through error analysis. The obtained solution is displayed through graphs and tables for different influential parameters.

Laser tattoo removal: Fundamental principles and practical approach.

Tattoos have long become a part of human civilization. However, as the number of people who get tattoos increases, so is the number of people who wish to have their tattoos removed. Compared to other methods, laser-based devices are associated with the best efficacy and least side effects in tattoo removal. Lack of understanding of the fundamental principles of laser and managing its parameters may result in suboptimal result and increased risk of side effects. Recognizing and mastering multiple factors including skin types, nature and color of tattoos, and proper selection of laser parameters such as wavelength, fluence, and pulse, are central in achieving an optimal tattoo removal outcome. This review provides a comprehensive overview on the fundamental principle of laser and practical approaches in tattoo removal.

Dynamic Mechanical Analysis as a Complementary Technique for Stickiness Determination in Model Whey Protein Powders.

The α-relaxation temperatures (Tα), derived from the storage and loss moduli using dynamic mechanical analysis (DMA), were compared to methods for stickiness and glass transition determination for a selection of model whey protein concentrate (WPC) powders with varying protein contents. Glass transition temperatures (Tg) were determined using differential scanning calorimetry (DSC), and stickiness behavior was characterized using a fluidization technique. For the lower protein powders (WPC 20 and 35), the mechanical Tα determined from the storage modulus of the DMA (Tα onset) were in good agreement with the fluidization results, whereas for higher protein powders (WPC 50 and 65), the fluidization results compared better to the loss modulus results of the DMA (Tα peak). This study demonstrates that DMA has the potential to be a useful technique to complement stickiness characterization of dairy powders by providing an increased understanding of the mechanisms of stickiness.

On the numerical simulation of stagnation point flow of non-Newtonian fluid (Carreau fluid) with Cattaneo-Christov heat flux.

BACKGROUND: This research article is devoted to evaluating the impact of Cattaneo-Christov heat in MHD stagnation point flow over a stretched and shrinking surface of the cylinder. MHD liquid of Carreau fluid is considered. Flow is generated due to stretching and shrinking aspects. The energy equation is developed in the presence of Cattaneo-Christov heat flux, where thermal relaxation time plays an important role in the heat transport. METHOD: The appropriate transformations are employed to solve a differential system via shooting method (bvp4c). RESULTS: The velocity, skin friction coefficient, temperature and Nusselt number are discussed versus different pertinent flow variable graphically. Over results indicate that the velocity distribution decreases against larger magnetic power law index and Weissenberg number. Temperature field diminishes via Prandtl number and thermal relaxation variable. Engineering quantities are discussed graphically. Magnitude of skin friction or velocity gradient upsurges versus magnetic parameter. Moreover, temperature gradient or Nusselt number shows the increasing impact via Prandtl number. Main observations of the considered flow problem are listed as concluding remarks.

Simulating Quantum Vibronic Dynamics at Finite Temperatures With Many Body Wave Functions at 0 K.

For complex molecules, nuclear degrees of freedom can act as an environment for the electronic "system" variables, allowing the theory and concepts of open quantum systems to be applied. However, when molecular system-environment interactions are non-perturbative and non-Markovian, numerical simulations of the complete system-environment wave function become necessary. These many body dynamics can be very expensive to simulate, and extracting finite-temperature results-which require running and averaging over many such simulations-becomes especially challenging. Here, we present numerical simulations that exploit a recent theoretical result that allows dissipative environmental effects at finite temperature to be extracted efficiently from a single, zero-temperature wave function simulation. Using numerically exact time-dependent variational matrix product states, we verify that this approach can be applied to vibronic tunneling systems and provide insight into the practical problems lurking behind the elegance of the theory, such as the rapidly growing numerical demands that can appear for high temperatures over the length of computations.

Pressure dependent ultrasonic characterization of nano-structured w-BN.

The work includes evaluation of elastic constants of wurtzite Boron nitride (w-BN) at different particle-size (5-40 nm) and pressure (0-60 GPa) at 300 K using potential model approach. Size and pressure dependent thermo-physical and ultrasonic parameters are also calculated using evaluated elastic constants. It is found that the elastic constants, ultrasonic velocities and Debye temperature of nanostructured w-BN enhance with increase in pressure and reduction in particle size. The size variation of thermal relaxation time resembles the dependency of thermal conductivity with size. The thermal conductivity of nanostructured w-BN is found to increase with reduction in nanoparticle size.

Influence of various parameters in the replica-exchange molecular dynamics method: Number of replicas, replica-exchange frequency, and thermostat coupling time constant.

The replica-exchange molecular dynamics (REMD) method has been used for conformational sampling of various biomolecular systems. To maximize sampling efficiency, some adjustable parameters must be optimized. Although it is agreed that shorter intervals between the replica-exchange attempts enhance traversals in the temperature space, details regarding the artifacts caused by these short intervals are controversial. In this study, we revisit this problem by performing REMD simulations on an alanine octapeptide in an implicit solvent. Fifty different sets of conditions, which are a combination of five replica-exchange periods, five different numbers of replicas, and two thermostat coupling time constants, were investigated. As a result, although short replica-exchange intervals enhanced the traversals in the temperature space, they led to artifacts in the ensemble average of the temperature, potential energy, and helix content. With extremely short replica-exchange intervals, i.e., attempted at every time step, the ensemble average of the temperature deviated from the thermostat temperature by ca. 7 K. Differences in the ensembles were observed even for larger replica-exchange intervals (between 100 and 1,000 steps). In addition, the shorter thermostat coupling time constant reduced the artifacts found when short replica-exchange intervals were used, implying that these artifacts are caused by insufficient thermal relaxation between the replica-exchange events. Our results will be useful to reduce the artifacts found in REMD simulations by adjusting some key parameters.

Rapid and high precision measurement of opto-thermal relaxation with pump-probe method.

Opto-thermal relaxation is one of the most important properties of nonlinear optical materials. Rapid and high precision measurement of this parameter is vital in both fundamental research and applications. Current measurement uses either complicated structure with poor precision or high power heating source with low efficiency. Here, we propose a pump-probe method (PPM) to optically measure the thermal relaxation using whispering gallery mode (WGM) microcavities. When the pump laser shines on a microcavity, the materials absorb the input power resonantly and heat up. Then the heat dissipates from the cavities to the surroundings. The opto-thermal effect induces a refractive index change reflected in the signal light transmission spectra. By analyzing the curve character of the transmission spectra of the signal response in the spontaneous relaxation process, the thermal relaxation time can be rapidly measured with high precision. Additionally, we systematically verify the PPM using microtoroids under various pump powers and at various locking points of the signal laser mode. The small rate of refractive index changes (∼10-8) can be discerned with an input pump power as low as 11.816 µW. Hence, the PPM can be used to detect refractive index perturbation, like gas or liquid sensing, temperature fluctuations with ultra-high sensitivity and be applied to optical materials analysis efficiently.

Current treatments of acne: Medications, lights, lasers, and a novel 650-µs 1064-nm Nd: YAG laser.

The treatment of acne, especially severe acne, remains a challenge to dermatologists. Therapies include retinoids, antibiotics, hormones, lights, lasers, and various combinations of these modalities. Acne is currently considered a chronic rather than an adolescent condition. The appropriate treatment depends on the patient and the severity of disease. The purpose of this study was to review current therapies for acne of all severities and to introduce the 650-µs 1064-nm laser for the treatment of acne.