Structuration of lipid bases zero-trans and palm oil-free for food applications.

This work evaluated structured lipids (SLs) through chemical and enzymatic interesterification (CSLs and ESLs). Blends of soybean oil and peanut oil 1:1 wt% were used, with gradual addition of fully hydrogenated crambe to obtain a final behenic acid concentration of 6, 12, 18, and 24 %. Chemical catalysis used sodium methoxide (0.4 wt%) at 100 °C for 30 min, while enzymatic catalysis used Lipozyme TL IM (5 wt%) at 60 °C for 6 h. Major fatty acids identified were C16:0, C18:0, and C22:0. It was observed that with gradual increase of hard fat, the CSLs showed high concentrations of reaction intermediates, indicating further a steric hindrance, unlike ESLs. Increased hard fat also altered crystallization profile and triacylglycerols composition and ESLs showed lower solid fat, unlike CSLs. Both methods effectively produced SLs as an alternative to trans and palm fats, view to potential future applications in food products.

Brain Perception of Different Oils on Appetite Regulation: An Anorectic Gene Expression Pattern in the Hypothalamus Dependent on the Vagus Nerve.

(1) Background: We examined the effect of the acute administration of olive oil (EVOO), linseed oil (GLO), soybean oil (SO), and palm oil (PO) on gastric motility and appetite in rats. (2) Methods: We assessed food intake, gastric retention (GR), and gene expression in all groups. (3) Results: Both EVOO and GLO were found to enhance the rate of stomach retention, leading to a decrease in hunger. On the other hand, the reduction in food intake caused by SO was accompanied by delayed effects on stomach retention. PO caused an alteration in the mRNA expression of NPY, POMC, and CART. Although PO increased stomach retention after 180 min, it did not affect food intake. It was subsequently verified that the absence of an autonomic reaction did not nullify the influence of EVOO in reducing food consumption. Moreover, in the absence of parasympathetic responses, animals that received PO exhibited a significant decrease in food consumption, probably mediated by lower NPY expression. (4) Conclusions: This study discovered that different oils induce various effects on parameters related to food consumption. Specifically, EVOO reduces food consumption primarily through its impact on the gastrointestinal tract, making it a recommended adjunct for weight loss. Conversely, the intake of PO limits food consumption in the absence of an autonomic reaction, but it is not advised due to its contribution to the development of cardiometabolic disorders.

Genome-Wide Association and RNA-Seq Analyses Reveal a Potential Candidate Gene Related to Oil Content in Soybean Seeds.

Soybean is a crucial crop globally, serving as a significant source of unsaturated fatty acids and protein in the human diet. However, further enhancements are required for the related genes that regulate soybean oil synthesis. In this study, 155 soybean germplasms were cultivated under three different environmental conditions, followed by phenotypic identification and genome-wide association analysis using simplified sequencing data. Genome-wide association analysis was performed using SLAF-seq data. A total of 36 QTLs were significantly associated with oil content (-log10(p) > 3). Out of the 36 QTLs associated with oil content, 27 exhibited genetic overlap with previously reported QTLs related to oil traits. Further transcriptome sequencing was performed on extreme high-low oil soybean varieties. Combined with transcriptome expression data, 22 candidate genes were identified (|log2FC| ≥ 3). Further haplotype analysis of the potential candidate genes showed that three potential candidate genes had excellent haplotypes, including Glyma.03G186200, Glyma.09G099500, and Glyma.18G248900. The identified loci harboring beneficial alleles and candidate genes likely contribute significantly to the molecular network's underlying marker-assisted selection (MAS) and oil content.

In-situ co-immobilization of lipase, lipoxygenase and L-cysteine within a metal-amino acid framework for conversion of soybean oil into higher-value products.

We propose a co-immobilized chemo-enzyme cascade system to mitigate random intermediate diffusion from the mixture of individual immobilized catalysts and achieve a one-pot reaction of multi-enzyme and reductant. Catalyzed by lipase and lipoxygenase, unsaturated lipid hydroperoxides (HPOs) were synthesized. 13(S)-hydroperoxy-9Z, 11E-octadecadienoic acid (13-HPODE), one compound of HPOs, was subsequently reduced to 13(S)-hydroxy-9Z, 11E-octadecadienoic acid (13-HODE) by cysteine. Upon the optimized conditions, 75.28 mg of 13-HPODE and 4.01 mg of 13-HODE were produced from per milliliter of oil. The co-immobilized catalysts exhibited improved yield compared to the mixture of individually immobilized catalysts. Moreover, it demonstrated satisfactory durability and recyclability, maintaining a relative HPOs yield of 78.5% after 5 cycles. This work has achieved the co-immobilization of lipase, lipoxygenase and the reductant cysteine for the first time, successfully applying it to the conversion of soybean oil into 13-HODE. It offers a technological platform for transforming various oils into high-value products.

Novel theoretical database-assisted UHPLC-Q-TOF/MS strategy for profiling and identifying oxidized triglycerides in pharmaceutical excipient soybean oil.

Pharmaceutical excipient soybean oil is widely used in injections. Its main components, triglycerides, are easily oxidized due to their unsaturated fatty acyls, raising safety concerns. However, it is hard to analyze those oxidized triglycerides due to their diverse compositions and low abundance. In this study, all theoretical oxidized triglycerides were predicted and a database consisting of 329 oxidized triglycerides was constructed. Then, a novel theoretical database-assisted ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF/MS) strategy was developed to finely profile and identify oxidized triglycerides in soybean oil. A total of 106 and 116 oxidized triglycerides were identified and relatively quantified in oxidized soybean oil and long-term stored soybean oil and preparations. It was found that oxidized triglycerides containing carbonyl groups were significantly more prevalent than other forms and oxidized triglycerides with two oxidized fatty acyl chains had the highest relative abundance. Fifteen markers indicating the oxidation of soybean oil were discovered. This strategy could rapidly and directly analyze the oxidized triglycerides and assign their fatty acyl compositions for the first time. This study will improve the quality control of soybean oil and its preparations.

Development of xanthan gum intelligent oil-in-water ink and its application in pork freshness preservation.

To optimize the stability of oil-based inks and ensure their wide application in freshness indication, new natural indicator inks were prepared using a stable oil-in-water structure. This study selected natural Lycium ruthenicum anthocyanin as the dye and glucose as the pigment carrier. Soybean oil was introduced as a linker and xanthan gum as a thickener, and an oil-in-water ink with the function of freshness indication was successfully developed. In ensuring the safety of ink labels for use on food packaging, particular attention is paid to the origin and properties of the materials used. All ingredients are of food-grade or bio-friendly provenance, thereby ensuring the safety of the product when in direct contact with food. We measured the viscosity, particle size and fineness of the ink for micro characterization and evaluated its macro printing performance by its printing effect on A4 paper. According to the experimental results, when the water-oil ratio of the ink is 10:5, the average particle size of the emulsion system is 822.83 nm, and the fineness reaches 5 µm. These values are relatively low, which indicates that the stability of the ink system is high at this time, and the ink shows excellent rheological and printing characteristics. With this water-to-oil ratio, the ink can show the best results when printed on A4 paper, clearly displaying image details. In addition, in fresh pork applications, inks with a 10: 5 water-to-oil ratio provide an accurate and highly sensitive indication of the freshness of pork. When the freshness of the pork changes, the ink color responds promptly. This high sensitivity makes the ink ideal for use as a food freshness indication tool, providing consumers with an intuitive and reliable reference for pork freshness. As a further innovation, combining this ink-printed label with a WeChat app not only allows consumers to know the freshness of the food in real-time but also tracks the supply chain information of the food, providing a more comprehensive application prospect for freshness-indicating products.

Exploration of GmDof11-lncRNA13082 Module Regulating Oil Synthesis in Plants.

Soybean (Glycine max [Linn.] Merr.) is an important oilseed crop. Although transcription factors (TFs) can coordinate the expression of mRNA and lncRNA, their coordination in the soybean oil synthesis pathway remains unclear. This study examined the interaction between the TF GmDof11 and lncRNA13082 and found that overexpression of GmDof11 led to an increase in the number of Arabidopsis seeds, thousand seed weight, crude protein, hydrolysis amino acid, and soluble sugar. Additionally, it reduced the triglyceride and starch contents and affected the proportion of fatty acids, increasing the contents of palmitic acid, stearic acid, and linolenic acid. The yeast two-hybrid experiments revealed that GmDof11 interacts with GmBCCP1, GmLEC1b, and GmFAB2 proteins. In the RT-qPCR analysis of transgenic soybean roots, it was found that GmDof11 can activate the production of lncRNA13082 and work in conjunction with lncRNA13082 to oversee oil synthesis and nutrient storage. Our research provides robust theoretical evidence for a comprehensive resolution of TF-lncRNA regulation in the soybean oil synthesis network.

Understanding emulsifier influence on complex coacervation: Essential oils encapsulation perspective.

The objective of this research was to explore the viability of pea protein as a substitute for gelatin in the complex coacervation process, with a specific focus on understanding the impact of incorporating an emulsifier into this process. The study involved the preparation of samples with varying polymer mixing ratios (1:1, 1:2, and 2:1) and emulsifier content. As core substances, black pepper and juniper essential oils were utilized, dissolved beforehand in grape seed oil or soybean oil, to minimize the loss of volatile compounds. In total, 24 distinct samples were created, subjected to freeze-drying to produce powder, and then assessed for their physicochemical properties. Results revealed the significant impact of emulsifier addition on microcapsule parameters. Powders lacking emulsifiers exhibited higher water solubility (57.10%-81.41%) compared to those with emulsifiers (24.64%-40.13%). Moreover, the emulsifier significantly decreased thermal stability (e.g., without emulsifier, Ton = 137.21°C; with emulsifier, Ton = 41.55°C) and adversely impacted encapsulation efficiency (highest efficiency achieved: 67%; with emulsifier: 21%).

Improved physicochemical properties of bigels produced with ethyl cellulose-based oleogel and moderately deacetylated konjac glucomannan hydrogel.

The ideal physicochemical properties of bigels are important for food applications. Therefore, a new bigel was prepared based on mixed beef tallow and soybean oil oleogel and deacetylated konjac glucomannan (KGM) hydrogel. The effect of the deacetylation degree of KGM on the physicochemical properties and microstructure of bigels was studied. The bigel containing moderate deacetylation degree of KGM had better rheological properties and hardness (319.84 g) than that with low and high deacetylation degrees of KGM. The interactions among the bigel components were analyzed by Fourier transform infrared spectroscopy and molecular dynamics simulation, indicating that the formation of the bigels was dominated by electrostatic interactions. Overall, the bigels containing moderate deacetylation degree of KGM had better physical properties, which may provide a theoretical foundation to develop bigels with low cholesterol, trans and saturated fats levels to replace traditional solid fats in food industry.

Identification and Candidate Gene Evaluation of a Large Fast Neutron-Induced Deletion Associated with a High-Oil Phenotype in Soybean Seeds.

Since the dawn of agriculture, crops have been genetically altered for desirable characteristics. This has included the selection of natural and induced mutants. Increasing the production of plant oils such as soybean (Glycine max) oil as a renewable resource for food and fuel is valuable. Successful breeding for higher oil levels in soybeans, however, usually results in reduced seed protein. A soybean fast neutron population was screened for oil content, and three high oil mutants with minimal reductions in protein levels were found. Three backcross F2 populations derived from these mutants exhibited segregation for seed oil content. DNA was pooled from the high-oil and normal-oil plants within each population and assessed by comparative genomic hybridization. A deletion encompassing 20 gene models on chromosome 14 was found to co-segregate with the high-oil trait in two of the three populations. Eighteen genes in the deleted region have known functions that appear unrelated to oil biosynthesis and accumulation pathways, while one of the unknown genes (Glyma.14G101900) may contribute to the regulation of lipid droplet formation. This high-oil trait can facilitate the breeding of high-oil soybeans without protein reduction, resulting in higher meal protein levels.

Impact of lipid droplet characteristics on the rheology of plant protein emulsion gels: Droplet size, concentration, and interfacial properties.

Plant-based meat analogs are being developed to address environmental, sustainability, health, and animal welfare concerns associated with real meat products. However, it is challenging to mimic the desirable physicochemical, functional, and sensory properties of real meat products using plant-based ingredients. Emulsion gels consisting of lipid droplets embedded in biopolymer matrices are commonly used to create products with appearances, textures, and sensory attributes like meat products. In this study, the impact of soybean oil droplet characteristics (concentration, size, and charge) on the physicochemical properties of potato protein gels was studied. The oil droplets were either coated by a non-ionic surfactant (Tween 20) or a plant protein (patatin) to obtain different surface properties. The introduction of the oil droplets caused the protein gels to change from mauve to off-white, which was attributed to increased light scattering. Increasing the oil droplet concentration in the emulsion gels decreased their shear modulus and Young's modulus, which was mainly attributed to the fact that the oil droplets were less rigid than the surrounding protein network. Moreover, increasing the oil droplet size made this effect more pronounced, which was attributed to their greater deformability. Competitive adsorption of proteins and surfactants at the oi-water interface in the Tween emulsion promoted emulsion instability. This research highlights the complexity of the interactions between oil droplets and protein networks in emulsion gels. These insights are important for the utilization of emulsion gels in the formulation of plant-based foods with improved quality attributes.

Replacing the animal fat in Bologna sausages using high internal phase emulsion stabilized with lentil protein isolate (Lens culinaris).

High internal phase emulsions (HIPEs) are promising techniques that can replace saturated fat in food without reducing the product's texture, sensory attributes, water-holding capacity, and cooking loss. In the current investigation, 100% pork back fat was replaced by HIPEs formed with lentil protein isolate (LPI) in Bologna sausages. HIPEs were prepared by 25% LPI dispersion (2, 4, 6, and 8%, w/w) and 75% (w/w) soybean oil. HIPEs with higher LPI concentration (4, 6, and 8%, w/w) showed lower droplet size, firmer appearance, and better rheology behavior than 2% LPI. The concentrations LPI (2%, 4%, 6%, and 8%, w/w) led to increased moisture in sausages (FH2, FH4, FH6, and FH8, respectively) compared to the FC. These LPI levels resulted in sausage values for pressed juice similar to the FC and lower energy values than sausages with soybean oil (FO) and pork back fat (FC). Besides, these LPI concentrations (4%, 6%, and 8%, w/w) resulted in a lower oil oxidation level in sausages with HIPEs (FH4, FH6, and FH8, respectively) compared to the control sausage formulation with pork back fat (FC). Bologna sausages elaborated with HIPEs showed emulsion stability values higher than 97%, without significance difference between them. The texture and sensory properties of sausages made with HIPEs were comparable to those made with pork back fat. HIPEs may improve the oxidation stability of the Bologna sausages. These results highlight the effectiveness of HIPEs structured with lentil protein in successfully substituting pork back fat in Bologna sausages with a better nutritional appeal.

Intravenous lipid emulsion interference in coagulation testing: an ex vivo analysis.

INTRODUCTION: Intravenous lipid emulsion is used in the rescue treatment of certain poisonings. A complication is interference with laboratory analyses. The aim of this study was to determine the impact of intravenous lipid emulsion on routine laboratory analysis of coagulation parameters ex vivo and determine if any of the analytical techniques remain reliable. METHODS: Samples were obtained from 19 healthy volunteers and divided in triplicate. One sample served as a control, and the other two were diluted to simulate the treatment of an average adult with Intralipid® 20 per cent Fresenius Kabi 100 mL (dilution-1) or 500 mL (dilution-2). Coagulation tests performed were prothrombin time, activated prothrombin time, D-dimer concentration and fibrinogen. Coagulation testing was performed by three techniques. Test-1 was performed on a Sysmex CN6000 analyzer. Test-2 was performed with a manual mechanical endpoint method using the semi-automated Stago KC4 Delta. Test-3 involved high-speed centrifugation before repeat testing on the Sysmex CN6000 analyzer. RESULTS: For test-1, only nine (47 per cent) samples in dilution-1 could be analyzed for coagulation tests, and no coagulation tests could be analyzed for dilution-2 because of lipaemia. For test-2 and test-3, all samples could be analyzed, and all results of both testing methods fell within the limits of the laboratory reference range. DISCUSSION: Difficulties in laboratory analysis of patients having received intravenous lipid emulsion are due to multiple factors. Most automated coagulation analyzers use optical measurements, which can be unreliable in the presence of a high intravenous lipid concentration. By altering the lipaemia in the testing solution using high-speed centrifugation or by using manual mechanical endpoint detection, we were able to obtain reliable results. These findings are limited by the use of an ex vivo method and healthy volunteers. CONCLUSIONS: This ex vivo model confirms that Intralipid® interferes with routine coagulation studies. It is important that clinicians are aware and inform their laboratories of its administration.

Noninvasive Temperature Measurements in Tissue-Simulating Phantoms Using a Solid-State Near-Infrared Sensor.

The monitoring of body temperature is a recent addition to the plethora of parameters provided by wellness and fitness wearable devices. Current wearable temperature measurements are made at the skin surface, a measurement that is impacted by the ambient environment of the individual. The use of near-infrared spectroscopy provides the potential for a measurement below the epidermal layer of skin, thereby having the potential advantage of being more reflective of physiological conditions. The feasibility of noninvasive temperature measurements is demonstrated by using an in vitro model designed to mimic the near-infrared spectra of skin. A miniaturizable solid-state laser-diode-based near-infrared spectrometer was used to collect diffuse reflectance spectra for a set of seven tissue phantoms composed of different amounts of water, gelatin, and Intralipid. Temperatures were varied between 20-24 °C while collecting these spectra. Two types of partial least squares (PLS) calibration models were developed to evaluate the analytical utility of this approach. In both cases, the collected spectra were used without pre-processing and the number of latent variables was the only optimized parameter. The first approach involved splitting the whole dataset into separate calibration and prediction subsets for which a single optimized PLS model was developed. For this first case, the coefficient of determination (R2) is 0.95 and the standard error of prediction (SEP) is 0.22 °C for temperature predictions. The second strategy used a leave-one-phantom-out methodology that resulted in seven PLS models, each predicting the temperatures for all spectra in the held-out phantom. For this set of phantom-specific predicted temperatures, R2 and SEP values range from 0.67-0.99 and 0.19-0.65 °C, respectively. The stability and reproducibility of the sample-to-spectrometer interface are identified as major sources of spectral variance within and between phantoms. Overall, results from this in vitro study justify the development of future in vivo measurement technologies for applications as wearables for continuous, real-time monitoring of body temperature for both healthy and ill individuals.

Enhancing rheology and reducing lipid digestion of oil-in-water emulsions using controlled aggregation and heteroaggregation of soybean protein isolate-peach gum microspheres.

There is a growing interest in developing highly viscous lipid foods using plant protein and polysaccharide gum-based emulsion technology. However, gaps remain in understanding the rheological, microstructural, and digestive properties of plant proteins like soybean protein isolate (SPI) in combination with various gums. This study investigates how combining SPI and peach gum (PG) affects rheology and lipolysis of oil-in-water (O/W) emulsions containing 20 wt% soybean oil. Emulsions with varying SPI and PG compositions including SPI-PG single and SPI/PG mixed droplet systems were prepared. Heating induced alterations in viscosity (e.g., SPI-PG from 14.88 to 90.27 Pa·s and SPI/PG from 9.66 to 85.32 Pa·s) and microstructure revealing aggregate formation at oil-water interface. The viscosity decreased significantly from the oral to intestinal phase (SPI-PG: 28.10 to 0.19 Pa·s, SPI/PG: 21.27 to 0.10 Pa·s). These changes affected lipid digestion, notably in SPI-PG and SPI/PG emulsions where a compact interface hindered lipolysis during digestion. Interestingly, free fatty acid (FFA) release during small intestinal phase followed a different order: SPI (82.51 %) > SPI-PG (70.77 %) > SPI/PG (63.60 %) > PG (56.09 %). This study provides insights into creating highly viscous O/W spreads with improved rheology, stability, and delayed lipid digestion, offering potential benefits in food product formulation.

Dietary fat lowers ileal endogenous amino acid losses in broiler chickens.

1. An experiment was conducted to determine the effect of the source of fat (soybean oil or tallow) on the ileal endogenous amino acid (EAA) losses in broilers.2. Three nitrogen (N)-free diets; a control diet with no added fat and test diets with 60 g/kg of either soybean oil or tallow were formulated. Titanium dioxide (5 g/kg) was added to all diets as an indigestible marker. Each diet was assigned to six replicate cages (eight birds per cage) from d 18 to 21 post-hatch. On d 21, the digesta were collected from the lower half of the ileum.3. The endogenous losses of nitrogen and amino acids (AA) were lower (p = 0.08; p = 0.001) in broilers fed diets with soybean oil or tallow, respectively, compared to those fed the diet with no fat. Source of fat had no influence (p > 0.05) on EAA losses.4. The most abundant AA in the ileal endogenous protein was glutamic acid, followed by aspartic acid, threonine, leucine, serine, valine and proline. In general, the concentrations of AA in the endogenous protein were lower (p < 0.05) with added fat. The exceptions were methionine, cysteine, proline and serine, which were unaffected. The effect of fat source on the AA contents of endogenous protein were inconsistent and differed depending on the AA.5. The inclusion of fats decreased EAA losses which implied they have beneficial effects beyond direct energy contribution. It can be proposed that the reduction of EAA flow may be an additional mechanism contributing to the extra-caloric effect of dietary fats.

Nutritional effect on lipoproteins and their subfractions in patients with Psoriatic Arthritis: a 12-week randomized trial-the DIETA trial.

INTRODUCTION: Patients with psoriatic arthritis have some lipid metabolism changes and higher risk of metabolic syndrome (MetS) and cardiovascular diseases, regardless of traditional risk factors, suggesting that chronic inflammation itself plays a central role concerning the atherosclerosis. However, there is a lack of information regarding atherogenic pattern and lipoprotein subfractions burden in these individuals. AIM: To evaluate the HDL and LDL-cholesterol plasmatic levels and their subfractions after a nutritional intervention in patients with psoriatic arthritis (PsA). METHODS: This was a randomized, placebo-controlled clinical trial of a 12-week nutritional intervention. PsA patients were randomly assigned to 1-Placebo: 1 g of soybean oil daily, no dietetic intervention; 2-Diet + Supplementation: an individualized diet, supplemented with 604 mg of omega-3 fatty acids, three times a day; and 3-Diet + Placebo: individualized diet + 1 g of soybean oil. The LDL subfractions were classified as non-atherogenic (NAth), atherogenic (Ath) or highly atherogenic (HAth), whereas the HDL subfractions were classified as small, medium, or large particles, according to the current recommendation based on lipoproteins electrophoresis. RESULTS: A total of 91 patients were included in the study. About 62% of patients (n = 56) had an Ath or HAth profile and the main risk factors associated were male gender, longer skin disease duration and higher BMI. Thirty-two patients (35%) had a high-risk lipoprotein profile despite having LDL plasmatic levels below 100 mg/dL. The 12-week nutritional intervention did not alter the LDL subfractions. However, there were significant improvement of HDL subfractions. CONCLUSION: Recognizing the pro-atherogenic subfractions LDL pattern could be a relevant strategy for identifying PsA patients with higher cardiovascular risk, regardless total LDL plasmatic levels and disease activity. In addition, a short-term nutritional intervention based on supervised and individualized diet added to omega-3 fatty acids changed positively the HDLLARGE subfractions, while LDLLARGE subfraction was improved in hypercholesterolemic individuals. CLINICALTRIALS: gov identifier: NCT03142503 ( http://www. CLINICALTRIALS: gov/ ).

Enhanced toxicity-free astaxanthin extraction from Haematococcus pluvialis via concurrent cell disruption and demulsification.

The extraction of astaxanthin from Haematococcus pluvialis involves the utilization of petroleum-derived organic solvents or supercritical CO2, beset by safety concerns, high costs, and environmental sustainability limitations. This study, in contrast, employed a method involving the adjustment of salt concentration, propylene glycol, and vegetable oil fraction to disrupt emulsion in aqueous cell lysates for facilitating the separation of astaxanthin. Under optimized conditions, an astaxanthin-containing oil with a content of 1.88% was obtained even with the use of wet biomass, and four rounds of consecutive extraction resulted in a cumulative recovery yield of 66.41%. This process produced astaxanthin-enriched soybean oil with 9.49 times improved antioxidant capacity that satisfies a requirement for health functional application. Omitting the solvent removal and drying processes, which consume tremendous energy, can reduce the production cost by 2.98 times compared to conventional methods. Consequently, this study suggests an effective technique for producing edible oil containing H. pluvialis-derived astaxanthin.

Constructing myosin/high-density lipoprotein composite emulsions: Roles of pH on emulsification stability, rheological and structural properties.

The emulsification activity of myosin plays a significant role in affecting quality of emulsified meat products. High-density lipoprotein (HDL) possesses strong emulsification activity and stability due to its structural characteristics, suggesting potential for its utilization in developing functional emulsified meat products. In order to explore the effect of HDL addition on emulsification stability, rheological properties and structural features of myosin (MS) emulsions, HDL-MS emulsion was prepared by mixing soybean oil with isolated HDL and MS, with pH adjustments ranging from 3.0 to 11.0. The results found that emulsification activity and stability in two emulsion groups consistently improved as pH increased. Under identical pH, HDL-MS emulsion exhibited superior emulsification behavior as compared to MS emulsion. The HDL-MS emulsion under pH of 7.0-11.0 formed a viscoelastic protein layer at the interface, adsorbing more proteins and retarding oil droplet diffusion, leading to enhanced oxidative stability, compared to the MS emulsion. Raman spectroscopy analysis showed more flexible conformational changes in the HDL-MS emulsion. Microstructural observations corroborated these findings, showing a more uniform distribution of droplet sizes in the HDL-MS emulsion with smaller particle sizes. Overall, these determinations suggested that the addition of HDL enhanced the emulsification behavior of MS emulsions, and the composite emulsions demonstrated heightened responsiveness under alkaline conditions. This establishes a theoretical basis for the practical utilization of HDL in emulsified meat products.

Effects and mechanisms of ultrasound-assisted emulsification treatment on the curcumin delivery and digestive properties of myofibrillar protein-carboxymethyl cellulose complex emulsion gel.

Different emulsion gel systems are widely applied to deliver functional ingredients. The effects and mechanisms of ultrasound-assisted emulsification (UAE) treatment and carboxymethyl cellulose (CMC) modifying the curcumin delivery properties and in vitro digestibility of the myofibrillar protein (MP)-soybean oil emulsion gels were investigated. The rheological properties, droplet size, protein and CMC distribution, ultrastructure, surface hydrophobicity, sulfhydryl groups, and zeta potential of emulsion gels were also measured. Results indicate that UAE treatment and CMC addition both improved curcumin encapsulation and protection efficiency in MP emulsion gel, especially for the UAE combined with CMC (UAE-CMC) treatment which encapsulation efficiency, protection efficiency, the release rate, and bioaccessibility of curcumin increased from 86.75 % to 97.67 %, 44.85 % to 68.85 %, 18.44 % to 41.78 %, and 28.68 % to 44.93 % respectively. The protein digestibility during the gastric stage was decreased after the CMC addition and UAE treatment, and the protein digestibility during the intestinal stage was reduced after the CMC addition. The fatty acid release rate was increased after CMC addition and UAE treatment. Apparent viscosity, storage modulus, and loss modulus were decreased after CMC addition while increased after UAE and UAE-CMC treatment especially the storage modulus increased from 0.26 Pa to 41 Pa after UAE-CMC treatment. The oil size was decreased, the protein and CMC concentration around the oil was increased, and a denser and uniform emulsion gel network structure was formed after UAE treatment. The surface hydrophobicity, free SH groups, and absolute zeta potential were increased after UAE treatment. The UAE-CMC treatment could strengthen the MP emulsion gel structure and decrease the oil size to increase the curcumin delivery properties, and hydrophobic and electrostatic interaction might be essential forces to maintain the emulsion gel.