RESUMEN
Background: Increased load bearing across the patellofemoral and tibiofemoral articulations has been associated with total knee arthroplasty (TKA) complications. Therefore, the purpose of this study was to quantify the biomechanical characteristics of the patellofemoral and tibiofemoral joints and simulate varying weight-bearing demands after posterior cruciate ligament-retaining (CR) and posterior-stabilized (PS) TKAs. Methods: Eight fresh-frozen cadaveric knees (average age, 68.4 years; range, 40-86 years) were tested using a custom knee system with muscle-loading capabilities. The TKA knees were tested with a CR and then a PS TKA implant and were loaded at 6 different flexion angles from 15° to 90° with progressively increasing loads. The independent variables were the implant types (CR and PS TKA), progressively increased loading, and knee flexion angle (KFA). The dependent variables were the patellofemoral and tibiofemoral kinematics and contact characteristics. Results: The results showed that at higher KFAs, the position of the femur translated significantly more posterior in CR implants than in PS implants (36.6 ± 5.2 mm and 32.5 ± 5.7 mm, respectively). The patellofemoral contact force and contact area were significantly greater in PS than in CR implants at higher KFAs and loads (102.4 ± 12.5 N and 88.1 ± 10.9 N, respectively). Lastly, the tibiofemoral contact force was significantly greater in the CR than the PS implant at flexion angles of 45°, 60°, 75°, and 90° KFA, the average at these flexion angles for all loads tested being 246.1 ± 42.1 N and 192.8 ± 54.8 N for CR and PS implants, respectively. Conclusions: In this biomechanical study, CR TKAs showed less patellofemoral contact force, but more tibiofemoral contact force than PS TKAs. For higher loads across the joint and at increased flexion angles, there was significantly more posterior femur translation in the CR design with a preserved posterior cruciate ligament and therefore significantly less patellofemoral contact area and force than in the PS design. The different effects of loading on implants are an important consideration for physicians as patients with higher load demands should consider the significantly greater patellofemoral contact force and area of the PS over the CR design.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Ligamento Cruzado Posterior , Soporte de Peso , Humanos , Anciano , Fenómenos Biomecánicos , Anciano de 80 o más Años , Soporte de Peso/fisiología , Persona de Mediana Edad , Ligamento Cruzado Posterior/cirugía , Adulto , Masculino , Femenino , Cadáver , Articulación de la Rodilla/cirugía , Articulación de la Rodilla/fisiología , Prótesis de la Rodilla , Articulación Patelofemoral/cirugía , Articulación Patelofemoral/fisiología , Rango del Movimiento ArticularRESUMEN
BACKGROUND: A consequence of a high riding patella is reduced osseous stability and malalignment of the patella (i.e., lateral patellar tilt and displacement). Although quantification of patellar height is a routine part of the radiographic examination of the patellofemoral joint, it is not clear which measure of patellar height is best associated with patella alignment. HYPOTHESIS/PURPOSE: To determine if patellar articular overlap (PAO) is better associated with lateral patellar tilt and lateral patellar displacement compared to traditional measures of patellar height. STUDY DESIGN: Cross-sectional. METHODS: Magnetic resonance images were obtained from 50 female participants (21 with patellofemoral pain and 29 healthy controls) under loaded conditions (25-35% bodyweight) at 15-20 degrees of knee flexion. Measurements of lateral patellar tilt and displacement as well as the PAO, Insall-Salvati ratio (ISV), Caton Deschamps-index (CD-index), or the Blacburn Peel-index (BP-index) were obtained from sagittal and axial plane images. RESULTS: The PAO was found to significantly correlated with lateral patellar tilt (r = -0.77, p < 0.001). In contrast, the ISV, CD-index, or the BP-index were not found to be associated with lateral patellar tilt (r = 0.13, p = 0.34; r = -0.14, p = 0.33; r = -0.08, p = 0.56, respectively). Both the PAO and ISV were found to be significantly correlated with lateral patellar displacement (r = -0.52, p < 0.001; r = 0.43, p = 0.002, respectively). Conversely, the CD-index and BP-index were not found to be associated with lateral patellar displacement (r = 0.03 p = 0.83; r = 0.05 p = 0.74, respectively). CONCLUSION: Of the measures of patellar height evaluated, the PAO was found to provide the greatest association with lateral patellar tilt and displacement.
Asunto(s)
Imagen por Resonancia Magnética , Rótula , Articulación Patelofemoral , Soporte de Peso , Humanos , Femenino , Rótula/diagnóstico por imagen , Estudios Transversales , Adulto , Soporte de Peso/fisiología , Articulación Patelofemoral/diagnóstico por imagen , Articulación Patelofemoral/fisiopatología , Articulación Patelofemoral/fisiología , Adulto Joven , Rango del Movimiento Articular/fisiologíaRESUMEN
BACKGROUND: Low patellofemoral joint (PFJ) contact force has been associated with PFJ osteoarthritis. Quadriceps force and knee flexion angles, which are typically altered after an anterior cruciate ligament reconstruction (ACLR), primarily influence PFJ contact forces. It is still inconclusive whether differences in PFJ contact forces are present during high knee flexion tasks such as side-step cutting after clearance to return to sports (RTS) after ACLR. PURPOSE: To explore PFJ contact forces in the ACLR limb and compare them with those of the contralateral and control limbs during side-step cutting tasks after clearance to RTS. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 26 male athletes with ACLR who were previously cleared to RTS were matched with 23 healthy men serving as the control group. Three-dimensional motion capture and force plate data were collected while both groups performed anticipated side-step cutting tasks. Joint kinematics, kinetics, muscle forces, and PFJ contact forces were calculated using musculoskeletal modeling. RESULTS: Peak PFJ force was lower in the ACLR limbs compared with the contralateral limbs (mean difference [MD], 5.89 body weight [BW]; 95% CI, 4.7-7.1 BW; P < .001) and the control limbs (MD, 4.44 BW; 95% CI, 2.1-6.8 BW; P < .001). During peak PFJ force, knee flexion angle was lower in ACLR limbs compared with the contralateral (MD, 4.88°; 95% CI, 3.0°-6.7°; P < .001) and control (MD, 6.01°; 95% CI, 2.0°-10.0°; P < .002) limbs. A lower quadriceps force compared with the contralateral (MD, 4.14 BW; 95% CI, 3.4-4.9 BW; P < .001) and control (MD, 2.83 BW; 95% CI, 1.4-4.3 BW; P < .001) limbs was also found. CONCLUSION: Lower PFJ contact forces and a combination of quadriceps force deficits and smaller knee flexion angle were found in the ACLR compared with the contralateral and control limbs even after clearance to RTS. CLINICAL RELEVANCE: Despite rehabilitation and subsequent clearance to RTS, differences in PFJ contact forces are present after ACLR. Current rehabilitation and RTS battery may not be effective and sensitive enough to identify and address these differences.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Reconstrucción del Ligamento Cruzado Anterior , Osteoartritis de la Rodilla , Articulación Patelofemoral , Humanos , Masculino , Articulación Patelofemoral/cirugía , Articulación Patelofemoral/fisiología , Volver al Deporte , Lesiones del Ligamento Cruzado Anterior/cirugía , Osteoartritis de la Rodilla/cirugía , Fenómenos Biomecánicos , Reconstrucción del Ligamento Cruzado Anterior/métodos , Articulación de la Rodilla/cirugíaRESUMEN
PURPOSE: The purpose of this study was to investigate biomechanical differences of medial patellofemoral ligament (MPFL) reconstruction, medial quadriceps tendon femoral ligament (MQTFL) reconstruction, and a combination of these techniques to restore lateral patellar constraint and contact pressures. METHODS: Eight fresh frozen cadaver knees were mounted to a custom jig with physiological quadriceps tendon loading. Flexion angles and contact pressure (CP) were dynamically measured using Tekscan® pressure sensors and Polhemus® Liberty 6 degree of freedom (6DOF) positioning sensors in the following conditions: 1) intact 2) MPFL and MQTFL deficient, 3) MPFL reconstructed, 4) Combined MPFL + MQTFL reconstructed, and 5) MQTFL reconstructed. Lateral patellar translation was tested using horizontally directed 30 N force applied at 30° of knee flexion. The knees were flexed in dynamic fashion, and CP values were recorded for 10°, 20°, 30°, 50°, 70°, and 90° degrees of flexion. Group differences were assessed with ANOVA's followed by pairwise comparisons with Bonferroni correction. RESULTS: MPFL (P = .002) and combined MPFL/MQTFL (P = .034) reconstruction significantly reduced patellar lateralization from +19.28% (9.78%, 28.78%) in the deficient condition to -17.57% (-27.84%, -7.29%) and -15.56% (-33.61%, 2.30%), respectively. MPFL reconstruction was most restrictive and MQTFL reconstruction the least -7.29% (-22.01%, 7.45%). No significant differences were found between the three reconstruction techniques. Differences in CP between the three reconstruction techniques were not significant (<.02 MPa) at all flexion angles. CONCLUSION: The present study found no significant difference for patellar lateralization and patellofemoral CP between MPFL, combined MPFL/MQTFL, and MQTFL reconstruction. All 3 techniques resulted in stronger lateral patellar constraint compared to the native state, while the MQTFL reconstruction emulated the intact state the closest. CLINICAL RELEVANCE: Various surgical techniques for medial patellofemoral complex reconstruction can restore patellar stability with similar patellofemoral articular pressures.
Asunto(s)
Rótula , Articulación Patelofemoral , Humanos , Rótula/cirugía , Fenómenos Biomecánicos , Articulación Patelofemoral/cirugía , Articulación Patelofemoral/fisiología , Articulación de la Rodilla/cirugía , Tendones , Ligamentos Articulares/cirugía , CadáverRESUMEN
PURPOSE: Patellofemoral pain syndrome is a common orthopedic trauma among runners. It is unclear whether patellofemoral joint stress (PFJS) is the highest (or lowest) when the knee joint flexion angle and extension moment are in combination under the condition that vastus medialis (VM) activation decreases. This study aimed to investigate the effects of changes in the PFJ contact area by decreasing the activation of the VM muscle on PFJS. METHODS: A PFJ sagittal model was used to quantify PFJ reaction force and PFJS. The PFJ model and mathematical modelling procedure were used to quantify PFJS based on previous studies. The simulation ranges were set to knee joint flexion angles of 10-45° and extension moments of 0-240 Nm. PFJS was calculated for the normal condition (NC) and decrease condition (DC) in VM activation. RESULTS: When the knee joint angle and knee joint moment were at the maximum, the PFJS showed the maximum value under both conditions (NC; 14.9 N/cm2, DC; 16.4 N/cm2). PFJS was found to be higher in DC than that in NC for all simulation ranges. CONCLUSION: Decreased VM activation may be involved in the mechanism of patellofemoral pain syndrome. In addition, the results of this study provide evidence that clinicians can enhance VM to relieve pain in patients with patellofemoral pain syndrome.
Asunto(s)
Articulación Patelofemoral , Síndrome de Dolor Patelofemoral , Humanos , Articulación Patelofemoral/fisiología , Músculo Cuádriceps , Fenómenos Biomecánicos , Articulación de la Rodilla/fisiologíaRESUMEN
Achilles tendinopathy and patellofemoral pain are common running injuries associated with increased Achilles tendon (AT) forces and patellofemoral joint (PFJ) stresses. This study examined AT forces and PFJ stresses at different running speeds in high-performing endurance runners. Twenty runners ran overground at four running speeds (3.3, 3.9, 4.8, and 5.6 m/s). AT forces and PFJ stresses were estimated from kinematic and kinetic data. Repeated measures ANOVA with partial eta squared effect sizes was conducted to assess differences between running speeds. Increased peak AT forces (19.5%; p < 0.001) and loading rates (57.3%; p < 0.001) from 3.3 m/s to 5.6 m/s were observed. Cumulative AT loading was greater in the faster speeds compared to the slower speeds. Faster running speeds resulted in increased peak plantar flexor moments, increased peak plantar flexion angles, and a more flexed knee and an anterior center of pressure position at touchdown. Peak PFJ stress was lower in the slowest speed (3.3 m/s) compared to the faster running speeds (3.9-5.6 m/s; p = 0.005). PFJ stress loading rate significantly increased (43.6%; p < 0.001). Greater AT loading observed could be associated with strategies such as increased plantar flexor moments and altered lower body position at touchdown which are commonly employed to generate greater ground contact forces. Greater AT and PFJ loading rates were likely due to shorter ground contact times and therefore less time available to reach the peak. Running at faster speeds could increase the risk of developing Achilles tendinopathy and patellofemoral pain or limit recovery from these injuries without sufficient recovery.
Asunto(s)
Tendón Calcáneo/fisiología , Articulación Patelofemoral/fisiología , Carrera/fisiología , Adolescente , Adulto , Fenómenos Biomecánicos , Femenino , Humanos , Cinética , Masculino , Soporte de Peso/fisiología , Adulto JovenRESUMEN
A range of surgical techniques and osteochondral interventions have been developed for early stage chondral/osteochondral repair interventions in the knee however, methods for functional, pre-clinical assessment of these therapies are limited. In this study, a method for simulating physiological loading and motion in the porcine patellofemoral joint was developed using a 6-axis simulator. As an example of how the method can be used, the influence of surgical positioning of osteochondral allografts in the patella on cartilage wear, deformation and damage and graft stability was investigated in this porcine patellofemoral joint model. The functional performance of allografts implanted either optimally (flush with the cartilage surface) or 1 mm proud of the cartilage surface was compared to a positive control (stainless steel pin implanted 1 mm proud of the cartilage surface), a negative control (no intervention) and a defect model. Allografts implanted flush with the surrounding cartilage could restore the articulating surface of the patella resulting in low wear, damage and deformation of the opposing cartilage surface, similar to that of the negative control group. Implanting the graft proud of the patella surface resulted in cartilage lesions on the femoral trochlea (ICRS grade 2) and a cartilage volume difference of 2.0 ± 3.9 mm3; the positive controls resulted in more severe lesions, a higher volume difference (14.2 ± 7.4 mm3) which in some cases exposed subchondral bone (ICRS grade 4). Defects in the patella caused deformation of the opposing cartilage surface. All grafts implanted in the patella subsided over the duration of the study. This study demonstrated a method that can be used to evaluate osteochondral repair strategies in the patellofemoral joint applying physiological loading and motions.
Asunto(s)
Articulación de la Rodilla/cirugía , Articulación Patelofemoral/fisiología , Aloinjertos , Animales , Cartílago/cirugía , Cartílago Articular , Simulación por Computador , Fémur/cirugía , Articulación de la Rodilla/fisiología , Modelos Biológicos , Rótula/cirugía , Articulación Patelofemoral/anatomía & histología , Porcinos/fisiología , Trasplante HomólogoRESUMEN
Back squats are a common strengthening exercise for knee and hip musculature. However, repetitive loaded movements like backs squats result in high patellofemoral joint loading and therefore may contribute to the development of common overuse injuries. Thus, it is important to understand how changing parameters such as squat depth or load influences patellofemoral loading. This study investigated differences in patellofemoral loading when experienced female lifters squatted to three depths (above parallel, parallel, and below parallel) and with three loads (unloaded, 50%, and 85% of depth-specific one repetition maximums). Patellofemoral joint reaction forces (pfJRF) and stresses (pfJS) were calculated from biomechanical models incorporating knee extensor moments (KEM) and joint angles. Peak KEMs displayed a depth-by-load interaction such that within each depth, as load increased so did peak KEM. However, within each load, the effects of depth were different. Peak pfJRF also increased with load and was higher at below parallel than above or parallel depths. Peak pfJS also displayed a depth-by-load interaction, increasing with load within a given depth, and being greatest at the below parallel depths within a given load. If patellofemoral joint loading is a concern, clinicians or coaches should carefully monitor the depth and load combinations being used.
Asunto(s)
Articulación Patelofemoral/fisiología , Levantamiento de Peso/fisiología , Adulto , Fenómenos Biomecánicos , Femenino , Humanos , Cinética , Soporte de Peso , Adulto JovenRESUMEN
OBJECTIVES: To assess the effect of ankle, knee, and hip kinematics on patellofemoral and tibiofemoral joint reaction forces (JRF) during bicycling. Secondarily, to assess if sex, horizontal saddle position, or crank arm length were related to JRFs, after accounting for kinematics. DESIGN: Experimental cross-sectional study. METHODS: Forty healthy adults (mean (SD); 28.6 (7.2) years, 24.2 (2.6)kg/m2, 17 women) bicycled under 18 bicycling positions. One position used commercial guidelines and 17 randomly deviated from commercial. Resultant patellofemoral as well as compressive and shear tibiofemoral JRFs were calculated. Linear mixed-effects models with a random intercept of leg-nested-in-participant were used. RESULTS: Patellofemoral resultant forces were most sensitive to all joint kinematics (i.e., sensitivity was defined as the slope of single predictor models); all JRFs were least sensitive to minimum knee flexion. Tibiofemoral compression was predicted by minimum hip flexion and maximum ankle dorsiflexion (R2=0.90). Tibiofemoral shear (R2=0.86) and the resultant patellofemoral JRF (R2=0.90) were predicted by minimum hip flexion, maximum ankle dorsiflexion, minimum knee flexion, and the interaction between minimum hip flexion and minimum knee flexion. Adding sex as a factor improved fit of all models. This sex-effect was driven by differences in cycling intensity, reflected by the tangential crank arm force. Horizontal saddle position and crank arm length were not related to JRFs. CONCLUSIONS: Optimizing joint kinematics should be the primary goal of bicycle-fit. JRFs were least sensitive to the current gold standard for assessing bicycle-fit, minimum knee flexion. Bicycle-fit is of particular importance for those working at high intensities.
Asunto(s)
Articulación del Tobillo/fisiología , Ciclismo/fisiología , Fenómenos Biomecánicos/fisiología , Articulación de la Cadera/fisiología , Articulación de la Rodilla/fisiología , Adulto , Estudios Transversales , Diseño de Equipo , Femenino , Humanos , Masculino , Persona de Mediana Edad , Fuerza Muscular/fisiología , Articulación Patelofemoral/fisiología , Distribución Aleatoria , Rango del Movimiento Articular/fisiología , Factores Sexuales , Adulto JovenRESUMEN
This study used a statistical parametric mapping method to compare temporal patterns knee joint loads and moments in cyclists pedalling using different saddle heights. Ten recreational cyclists pedalled using three saddle heights (Preferred, High and Low) during a single session. High and Low saddle heights were determined based on dynamically measured knee flexion angles (±10° from their Preferred height). 3D angles for the hip and knee and knee moments and forces were computed using a musculoskeletal model driven by 3D full-body motion and pedal forces. Knee flexion angles presented significant differences between saddle heights for the full crank cycle, without differences for hip adduction/abduction. Patellofemoral force was less for the Preferred compared to the High and Low saddle heights and for the High compared to the Low saddle heights between ~70-160° of the crank cycle. Right tibiofemoral anterior-posterior shear force was reduced for the Preferred compared to the Low saddle heights, without significant effects for the left tibiofemoral joint (p = 0.29-1.00). Large differences in temporal patterns for knee flexion due to changes in saddle height were followed by differences in patellofemoral force mostly when low force magnitudes were being transmitted between the femur and the patella.
Asunto(s)
Ciclismo/fisiología , Rodilla/fisiología , Equipo Deportivo , Fenómenos Biomecánicos , Interpretación Estadística de Datos , Femenino , Cadera/fisiología , Humanos , Masculino , Articulación Patelofemoral/fisiología , Estudios de Tiempo y Movimiento , Adulto JovenRESUMEN
OBJECTIVE: To examine patellofemoral joint (PFJ) loading in two lunge movements: Forward Lunge (FL) and Backward Lunge (BL). DESIGN: Repeated Measures. SETTING: University Biomechanics Laboratory. PARTICIPANTS: 20 asymptomatic females. MAIN OUTCOME MEASURES: Six trials of two lunge movements (FL and BL) to a depth of 75% of leg length were performed. 3-D motion capture and force platforms were used to collect data as input into a musculoskeletal model to determine quadriceps force, PFJ reaction force, PFJ stress, and knee flexion angle. RESULTS: Multivariate analysis indicated differences in PFJ loading variables and joint angles between the lunge movements (Forward vs. Backward) and phases (Down vs. Up). Quadriceps force, PFJ reaction force, and knee flexion angle were larger in the FL movement and Up phases. PFJ loading rate was greater in the FL movement along with a lower forward trunk tilt. CONCLUSION: The FL produced greater PFJ loading variables compared to the BL. Further research is needed to examine a population of individuals who have patellofemoral pain (PFP) to see if their symptoms may be reduced when using the BL.
Asunto(s)
Articulación Patelofemoral/fisiología , Estrés Mecánico , Artralgia/fisiopatología , Fenómenos Biomecánicos , Femenino , Humanos , Movimiento , Músculo Cuádriceps/fisiología , Estudios de Tiempo y Movimiento , Torso/fisiología , Soporte de Peso , Adulto JovenRESUMEN
The patellofemoral (PF) joint is susceptible to many pathologies resulting from acute injury, chronic disease and complications following surgical treatment of the knee. The objectives of this study were to describe case series measurements of patellar motion in healthy older adults as they performed three gait activities, determine patellar tendon angle and moment arm, and show if these quantities were activity dependent. A stereo radiography system was utilized to obtain the 3D PF kinematics of seventeen healthy people over 55 years of age (8F/9M, 66 ± 7.9 years old, 75.7 ± 20.5 kg) as they performed level walking, a step down, and a pivot turn. For a similar portion of the gait cycle, patellar flexion (6.2° ± 5.8) and average range of motion (ROM) (11.0° ± 5.9°) for walking with a step down was greater compared to the other gait activities (gait ROM 6.9° ± 4.3°, pivot ROM 5.7° ± 3.3°), while the average range of motion for patella tilt was greater during walking with a pivot turn (8.6° ± 3.9°). However, each subject displayed distinct PF kinematic trends during all activities with a few notable exceptions. Importantly, the knee extensor mechanism characteristics of patellar tendon angle and moment arm showed considerable variation across subjects but were largely unaltered by changing activities. The variation between subjects and the different behavior of the patella during the step down and pivot emphasized the need for analysis of a range of activities to reveal individual response to pathology and treatment in patellar maltracking and osteoarthritis.
Asunto(s)
Marcha/fisiología , Articulación de la Rodilla/fisiología , Rótula/cirugía , Articulación Patelofemoral/fisiología , Anciano , Artroplastia de Reemplazo de Rodilla , Fenómenos Biomecánicos , Femenino , Humanos , Rodilla/fisiología , Masculino , Persona de Mediana Edad , Osteoartritis/fisiopatología , Ligamento Rotuliano/fisiopatología , Ligamento Rotuliano/cirugía , Rango del Movimiento Articular , Caminata/fisiologíaRESUMEN
BACKGROUND: The onset and progression of patellofemoral osteoarthritis (OA) has been linked to alterations in cartilage stress-a potential precursor to pain and subsequent cartilage degradation. A lack in quantitative tools for objectively evaluating patellofemoral joint contact stress limits our understanding of pathomechanics associated with OA. RESEARCH QUESTION: Could computational modeling and biplane fluoroscopy techniques be used to discriminate in-vivo, subject-specific patellofemoral stress profiles in individuals with and without patellofemoral OA? METHODS: The current study employed a discrete element modeling framework driven by in-vivo, subject-specific kinematics during downhill gait to discriminate unique patellofemoral stress profiles in individuals with patellofemoral OA (n = 5) as compared to older individuals without OA (n = 6). All participants underwent biplane fluoroscopy kinematic tracking while walking on a declined instrumented treadmill. Subject-specific kinematics were combined with high resolution geometrical models to estimate patellofemoral joint contact stress during 0%, 25 %, 50 %, 75 % and 100 % of the loading response phase of downhill gait. RESULTS: Individuals with patellofemoral OA demonstrated earlier increases in patellofemoral stress in the lateral patellofemoral compartment during loading response as compared to OA-free controls (P = 0.021). Overall, both groups exhibited increased patellofemoral contact stress early in the loading response phase of gait as compared to the end of loading response. Results from this study show increased stress profiles in individuals with patellofemoral OA, indicating increasing joint loading in early phases of gait. SIGNIFICANCE: This modeling framework-combining arthrokinematics with discrete element models-can objectively estimate changes in patellofemoral joint stress, with potential applications to evaluate outcomes from various treatment programs, including surgical and non-surgical rehabilitation treatments.
Asunto(s)
Fenómenos Biomecánicos/fisiología , Marcha/fisiología , Articulación Patelofemoral/fisiología , Caminata/fisiología , Estudios de Evaluación como Asunto , Estudios de Factibilidad , Femenino , Humanos , MasculinoRESUMEN
In this study, we investigated whether the measurement of patellar tracking can be used as a diagnostic parameter of patellofemoral joint disease. Patellar tracking is defined as the movement of the patella in relation to the femorotibial joint within the full range of flexion and extension of the knee joint. The PubMed, EMBASE, Medline, PsychINFO, and AMED databases were used to find relevant articles. Analyzed were the patellar tracking coordinate system and the measurement objects, precision, methods used in those studies, as well as the results obtained. Origin points for coordinate systems varied across the studies. The research object and methods of patellar tracking varied in the studies. Most studies focused on a static description of the internal and external displacement and the internal and external inclination. The in vivo, noninvasive, and six degrees of freedom evaluation of patellar tracking reflect patellar motion more comprehensively, though each of these methods does so in different ways. Dynamic and quantitative evaluation of patellar tracking is still lacking in clinical work. Accurate and quantitative patellar tracking measurement could provide clinicians with a comprehensive evaluation of the stability of the knee joint.
Asunto(s)
Rótula/fisiología , Articulación Patelofemoral/fisiología , Rango del Movimiento Articular , Fenómenos Biomecánicos , Humanos , Articulación de la Rodilla/fisiología , Articulación de la Rodilla/fisiopatología , Rótula/fisiopatología , Articulación Patelofemoral/fisiopatologíaRESUMEN
We combined computational modelling with experimental gait data to describe and explain load distribution across the medial and lateral facets of the patella during normal walking. The body was modelled as a 13-segment, 32-degree-of-freedom (DOF) skeleton actuated by 80 muscles. The knee was represented as a 3-body, 12-DOF mechanical system with deformable articular cartilage surfaces at the tibiofemoral (TF) and patellofemoral (PF) joints. Passive responses of the knee model to 100 N anterior-posterior drawer and 5 Nm axial torque tests were consistent with cadaver data reported in the literature. Trajectories of 6-DOF TF and PF joint motion and articular joint contact calculated for walking were also consistent with measurements obtained from biplane X-ray imaging. The force acting on the lateral patellar facet was considerably higher than that on the medial facet throughout the gait cycle. The vastus medialis, vastus lateralis and patellar tendon forces contributed substantially to the first peak in the PF contact force during stance whereas all three portions of the vasti and rectus femoris were responsible for the second peak during swing. A higher lateral patellar contact force was caused mainly by the laterally-directed shear force applied by the quadriceps muscles, especially the vastus lateralis, intermedius and rectus femoris. A better understanding of the contributions of the individual knee muscles to load distribution in the PF compartment may lead to improved surgical and physiotherapy methods to treat PF disorders.
Asunto(s)
Articulación Patelofemoral/fisiología , Caminata/fisiología , Adulto , Cadáver , Cartílago Articular/fisiología , Simulación por Computador , Femenino , Humanos , Masculino , Modelos Biológicos , Músculo Cuádriceps/fisiología , Reproducibilidad de los Resultados , Soporte de Peso , Adulto JovenRESUMEN
The tibial tuberosity-trochlear groove (TT-TG) distance is a radiographic measurement that is used to quantify malalignment of the patellofemoral joint (PFJ) in cross-sectional imaging. There is an ongoing debate about the impact of the TT-TG-distance on lateral patellar instability and the initiating of cartilage degeneration. In this prospective study, the association of T2* relaxation times and TT-TG distances in professional soccer players was analyzed. 36 knees of 18 professional soccer players (age: 21 ± 2.8 years) were evaluated. Participants underwent knee MRI at 3 T. For qualitative image analysis, fat-saturated 2D PD-weighted Fast Spin Echo (FSE) and T1-weighted FSE sequences were used. For quantitative analysis, T2* measurements in 3D data acquisitions were performed. In a qualitative analysis there was no structural cartilage damage and no abnormalities of the patellar and trochlea shape. The highest T2* values (26.7 ± 5.9 ms) were observed in the central compartment of the patella. The mean TT-TG distance was 10 ± 4 mm (range 3-20 mm). There was no significant correlation between TT-TG distance and T2* relaxation times in all three compartments of the retropatellar cartilage. Our study shows that so long as patellar and trochlear morphology is normal, TT-TG distance alone does not affect the tissue structure of the retropatellar cartilage in professional soccer players.
Asunto(s)
Cartílago/fisiología , Articulación de la Rodilla/fisiología , Imagen por Resonancia Magnética/métodos , Rótula/fisiología , Articulación Patelofemoral/fisiología , Fútbol/estadística & datos numéricos , Tibia/fisiología , Adulto , Humanos , Masculino , Estudios Prospectivos , Relajación , Adulto JovenRESUMEN
Patellofemoral pain (PFP) is commonly caused by abnormal pressure on the knee due to excessive load while standing, squatting, or going up or down stairs. To better understand the pathophysiology of PFP, we conducted a noninvasive patellar tracking study using a C-arm computed tomography (CT) scanner to assess the non-weight-bearing condition at 0° knee flexion (NWB0°) in supine, weight-bearing at 0° (WB0°) when upright, and at 30° (WB30°) in a squat. Three-dimensional (3D) CT images were obtained from patients with PFP (12 women, 6 men; mean age, 31 ± 9 years; mean weight, 68 ± 9 kg) and control subjects (8 women, 10 men; mean age, 39 ± 15 years; mean weight, 71 ± 13 kg). Six 3D-landmarks on the patella and femur were used to establish a joint coordinate system (JCS) and kinematic degrees of freedom (DoF) values on the JCS were obtained: patellar tilt (PT, °), patellar flexion (PF, °), patellar rotation (PR, °), patellar lateral-medial shift (PTx, mm), patellar proximal-distal shift (PTy, mm), and patellar anterior-posterior shift (PTz, mm). Tests for statistical significance (p < 0.05) showed that the PF during WB30°, the PTy during NWB0°, and the PTz during NWB0°, WB0°, and WB30° showed clear differences between the patients with PFP and healthy controls. In particular, the PF during WB30° (17.62°, extension) and the PTz during WB0° (72.5â¬0 mm, posterior) had the largest rotational and translational differences (JCS Δ = patients with PFP-controls), respectively. The JCS coordinates with statistically significant difference can serve as key biomarkers of patellar motion when evaluating a patient suspected of having PFP. The proposed method could reveal diagnostic biomarkers for accurately identifying PFP patients and be an effective addition to clinical diagnosis before surgery and to help plan rehabilitation strategies.
Asunto(s)
Articulación Patelofemoral/fisiología , Síndrome de Dolor Patelofemoral/fisiopatología , Soporte de Peso , Adulto , Fenómenos Biomecánicos , Estudios de Casos y Controles , Femenino , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Articulación Patelofemoral/diagnóstico por imagen , Síndrome de Dolor Patelofemoral/diagnóstico por imagen , Rango del Movimiento Articular , Rotación , Tomografía Computarizada por Rayos X , Adulto JovenRESUMEN
BACKGROUND: The purpose of this study was to examine kinematic and kinetic differences associated with patellofemoral pain after anterior cruciate ligament reconstruction between limbs at 12-week post-surgery and at time of return to sport. METHOD: Twenty-four adolescent females completed 5 consecutive single leg squats on each limb at 12-weeks post-surgery and again during their RTS assessment. Peak knee extension moment, peak hip adduction angle, and patellofemoral joint stress at 45 degrees of knee flexion were calculated. Separate two by two repeated measures ANOVA were performed. FINDINGS: There was a significant interaction (limb × time) for knee extension moment (p < 0.001). Surgical limb knee extension moment was significantly less than the non-surgical limb at return to sport (p < 0.001). At 12-weeks the surgical limb was significantly less than non-surgical limb (p < 0.001), additionally the surgical limb was significantly greater at time of return to sport than at 12 weeks (p < 0.001). There was a significant main effect of limb for hip adduction angle (p = 0.002). Surgical limb was significantly greater than non-surgical limb (Surgical = 9.84 (SE 1.53) degree, non-surgical = 4.79 (SE 1.01) degree). There was also a main effect of time and limb for patellofemoral joint stress. Return to sport was significantly greater than 12 weeks and the surgical limb was significantly less than non-surgical limb (Surgical = 4.93 (SE 0325) MPa, Nonsurgical = 5.29 (SE 0.30) MPa). INTERPRETATION: The surgical limb of participants following ACL-R demonstrated variables that have been associated with the development of patellofemoral pain.
Asunto(s)
Reconstrucción del Ligamento Cruzado Anterior , Articulación Patelofemoral/fisiología , Articulación Patelofemoral/cirugía , Volver al Deporte , Deportes , Adolescente , Adulto , Fenómenos Biomecánicos , Femenino , Humanos , Masculino , Adulto JovenRESUMEN
OBJECTIVES: To evaluate short-term effects of a four-week gait retraining program using visual feedback on trunk flexion angle, patellofemoral joint (PFJ) stress, lower extremity biomechanics and motor skill automaticity. DESIGN: Longitudinal interventional study. SETTINGS: University research laboratory. PARTICIPANTS: Twelve asymptomatic recreational runners (seven male and five female). MAIN OUTCOME MEASURES: Trunk kinematics as well as lower extremity kinematics and kinetics were assessed prior to training at week 1 (baseline) and week 2, 3, 4 and 8 (retention). PFJ stress was computed using a sagittal plane model. A dual-task procedure was performed to examine automaticity. RESULTS: At week 8, runners demonstrated 10.1° increase in trunk flexion angle (p < .001) and 17.8% reduction in peak PFJ stress (p < .001) compared to baseline. This is associated with a 16.8% decrease in knee extensor moment and less than 2.5° change in knee flexion angle. Participants also showed 33.3% increase in peak hip extensor moment and small reduction in peak ankle plantar flexor moment. Lastly, runners demonstrated automaticity of the modified skill with a dual-task cost of less than 3%. CONCLUSION: The gait retraining program is effective to elicit short term changes in trunk position, PFJ stress, and automaticity of the new motor skill.
Asunto(s)
Articulación del Tobillo/fisiología , Marcha/fisiología , Articulación de la Rodilla/fisiología , Articulación Patelofemoral/fisiología , Rango del Movimiento Articular/fisiología , Carrera/fisiología , Femenino , Estudios de Seguimiento , Humanos , Masculino , Factores de Tiempo , Adulto JovenRESUMEN
BACKGROUND: Patellofemoral joint (PFJ) osteoarthritis may occur after anterior cruciate ligament reconstruction (ACLR). The mechanisms underpinning the development of PFJ osteoarthritis are not known but may relate to altered PFJ loading. Few studies have assessed PFJ loads during high-impact tasks, such as running, beyond the acute rehabilitation phase (ie, >12 months) after ACLR. PURPOSE/HYPOTHESIS: The purpose was to compare between-limb joint angles, joint moments, and PFJ contact force during running in individuals at 12 to 24 months after unilateral ACLR. We hypothesized that peak knee flexion angle, knee extension moment, and PFJ contact force during stance would be lower in the ACLR limb compared with the uninjured limb. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 55 participants (mean ± SD age, 28 ± 7 years), 12 to 24 months after ACLR, ran at a self-selected speed (2.9 ± 0.3 m/s). Measured kinematics and ground-reaction forces were input into musculoskeletal models to calculate joint moments and muscle forces. These values were subsequently input into a PFJ model to calculate contact force peak and impulse. Outcome measures were compared between the ACLR and uninjured limbs. RESULTS: In the ACLR limb, compared with the uninjured limb, the PFJ contact force displayed a lower peak (ACLR, 6.1 ± 1.3 body weight [BW]; uninjured, 6.7 ± 1.4 BW; P < .001) and impulse (ACLR, 0.72 ± 0.17 BW*seconds [BWs]; uninjured, 0.81 ± 0.17 BWs; P < .001). At the time of the peak PFJ contact force, the knee extension moment was lower in the ACLR limb (ACLR, 14.0 ± 2.4 %BW*height [%BW*HT]; uninjured, 15.5 ± 2.5 %BW*HT; P < .001). The opposite was true for the ankle plantarflexion moment (ACLR, 12.1 ± 2.6 %BW*HT; uninjured, 11.5 ± 2.7 %BW*HT; P = .019) and the hip extension moment (ACLR, 2.3 ± 2.5 %BW*HT; uninjured, 1.6 ± 2.3 %BW*HT; P = .013). The foot-ground center of pressure was located more anteriorly with respect to the ankle joint center (ACLR, 5.8 ± 0.9 %height [%HT]; uninjured, 5.4 ± 1.0 %HT; P = .001). No differences were found for the sagittal plane hip, knee, and ankle angles. CONCLUSION: The ACLR limb experienced lower peak PFJ loads during running, explained by a small anterior shift in the foot-ground center of pressure during stance that offloaded the torque demand away from the ACLR knee. CLINICAL RELEVANCE: Lower net PFJ loading during running in the ACLR limb more than 12 months after ACLR suggests that underloading might play a role in the onset of PFJ osteoarthritis after ACLR.