Gas chromatography mass spectrometer determination of dimethylamine impurity in N,N-dimethylformamide solvent by derivatization of N,N-dimethylbenzamide with benzoyl chloride agent.

This study describes the development of a reliable and linear analytical method for precisely determining dimethylamine impurity in N,N-dimethylformamide solvent utilizing a benzoyl chloride derivatization reagent and a gas chromatography mass spectrometer. Benzoyl chloride was used to derivatize dimethylamine. At normal temperature, benzoyl chloride combined with dimethylamine, producing N,N-dimethylbenzamide. This method separated N,N-dimethylbenzamide using Rtx-5 amine (30 m × 0.32 mm × 1.50 µm) as the stationary phase, helium as the carrier gas, argon as the collision gas, and methanol as the diluent. The column flow rate was 2 mL/min. The retention time of N,N-dimethylbenzamide was determined to be 8.5 min. Precision, linearity, and accuracy were tested using ICH Q2 (R2) and USP<1225> guidelines. The percentage coefficient of variation (CV) for N,N-dimethylbenzamide in the system suitability parameter was 1.1%. The correlation coefficient of N,N-dimethylbenzamide was found to be >0.99. In the method precision parameter, the % CV for N,N-dimethylbenzamide was found to be 1.9%, whereas the % CV for N,N-dimethylbenzamide was 1.2% in intermediate precision. The percentage recovery of N,N-dimethylbenzamide was determined to be between 80% and 98%.

Residual Pattern of Chlorantraniliprole, Thiamethoxam, Flubendiamide and Deltamethrin in Tomato Fruit and Soil.

Tomato, Lycopersicon esculentum L. is grown widely as an important day-to-day demand vegetable. The crop is attacked by various polyphagous insect pests like tomato fruit borer, stink bug, cabbage looper, flea beetle, aphids, whitefly, two-spotted spider mite, etc., and oligophagous insects like leaf-miner, five-spotted hawkmoth, etc. To combat the damage and yield loss, various chemical insecticides were sprayed on tomatoes under field conditions. The residual pattern of insecticides like chlorantraniliprole, thiamethoxam, flubendiamide, and deltamethrin residues was studied following applications of chlorantraniliprole 18.5% SC (Coragen) @ 30 g a.i./ha, thiamethoxam 25% WG (Actara) @ 50 g a.i./ha, flubendiamide 39.35 M/M SC (Fame) @ 48 g a.i./ha and deltamethrin 2.8% EC (Decis 100) @ 12.5 g a.i./ha using Reverse Phase High-Performance Liquid Chromatography (RP-HPLC). Fruit samples were collected at 0 (1 h after application), 1, 2, 3, 5, 7 days and at harvest time. All the residues of insecticides such as chlorantraniliprole (0.09 mg kg- 1), thiamethoxam (0.03 mg kg- 1), flubendiamide (0.02 mg kg- 1), and deltamethrin (0.01 mg kg- 1) were persisted up to 5th day. There were no residues found at harvest time. The residues of chlorantraniliprole and deltamethrin persisted up to 3rd day of spraying whereas the residues of flubendiamide and thiamethoxam were not detected on the same day in the soil.

Optimization and validation of liquid-liquid extraction with low-temperature purification (LLE-LTP) for determining fluopyram fungicide in water samples using HPLC-DAD.

Fluopyram is a fungicide and nematicide that belongs to the chemical group of benzamides, which act as succinate dehydrogenase inhibitors (SDHIs) on the mitochondrial respiratory chain of fungi. Despite being well known in several countries, there are few studies involving the optimization and validation of extraction methods for determining fluopyram in water samples. Therefore, this study aimed to optimize and validate liquid-liquid extraction with low-temperature purification (LLE-LTP) to determine fluopyram fungicide in water samples using high-performance liquid chromatography with diode array detection (HPLC-DAD). A two-level full factorial design was employed to optimize LLE-LTP which enabled achieving a recovery rate close to 100% and relative standard deviations (RSD) < 10.0%. The validation showed that the extraction method may be considered selective, precise, accurate, and linear in the range of 6.0 to 200 µg L-1. The LOD and LOQ were 4.0 and 6.0 µg L-1, respectively, proving the efficiency of this method for trace level determination of this fungicide in water samples. LLE-LTP coupled to HLPC-DAD analysis showed a matrix effect of less than 8% and it was applied in monitoring 20 environmental water samples, but no fluopyram residue was detected in the samples.

Dissipation and risk assessment of fluopyram and trifloxystrobin on onion by GC-MS/MS.

The dissipation and risk assessment studies on fluopyram, trifloxystrobin and their metabolites were carried out on onion under field conditions after two treatments of fluopyram 250 g/L + trifloxystrobin 250 g/L SC @ 150 and 300 g a.i. ha-1. The onion bulb samples were collected at 0, 3, 7, 14, and 21 days after second spray to study the pattern of dissipation using QuEChERS methodology for processing and analysis on GC-MS/MS. The total initial residues of fluopyram (fluopyram + fluopyram benzamide) in immature onion bulb were 2.14 and 4.93 mg kg-1, at single and double dose, respectively. The residues of 0.02 and 0.06 mg kg-1 persisted in the mature onion bulb collected at the harvest (30 days after treatment). The total initial residues of trifloxystrobin (trifloxystrobin + CGA 321113) in immature onion bulb were 0.65 and 1.97 mg kg-1, at single and double dose, respectively, which reached < LOQ and 0.06 mg kg-1 at the respective doses at the harvest time. Dissipation of fluopyram followed second-order kinetics with DT50 values of 1.83 and 1.74 days, whereas trifloxystrobin followed first-order kinetics with DT50 values of 4.73 and 4.78 days, at single and double dose respectively. Risk assessment in terms of hazard quotient was done to estimate the risk that can occur due to application of this combination pesticide. It was observed that even the spray at the double recommended dose could not have dietary risks on the consumers.

Distribution of fluopyram and tebuconazole in pomegranate tissues and their risk assessment.

Residue distribution of fluopyram and tebuconazole was assessed in pomegranate whole fruit, aril, outer peel (pericarp), inner peel (mesocarp) and leaves. The method LOQ of fluopyram and tebuconazole were 0.01 and 0.02 mg kg-1, respectively. Both fungicides remained in fruit peel and residues in edible aril were < LOQ. In fruit peel major portion of the fungicides remained on pericarp with minimal movement to mesocarp. In mesocarp fluopyram was 5.7-14.2%; tebuconazole, 7.5-14.4% of the residues in pericarp. Terminal residues of fluopyram and tebuconazole in pomegranate whole fruit were 0.037-0.094 and 0.036-0.096 mg kg-1. Half-life of fluopyram in pomegranate fruit and leaves were 7.3-9.1 and 15 days; tebuconazole, 8-10.3 and 11.2-12.6 days, respectively. Pre-harvest intervals for treatment of combination formulation of fluopyram and tebuconazole, were 47-59 days in fruits, 158-173 in leaves. Dietary risk assessment demonstrated that consumption of peel and leaves may pose risk to human health, whereas fruit consumption was considered safe.

Residues and dietary intake risk assessments of clomazone, fomesafen, haloxyfop-methyl and its metabolite haloxyfop in spring soybean field ecosystem.

Soybean is an important oilseed crop, but weed can have a significant effect on soybean yield. Clomazone, fomesafen, and haloxyfop-methyl are high-efficacy herbicides, and the combination of these herbicides shows an ideal effect on weed control. However, the residues of these herbicides and their impacts on human health are still largely unknown. In the current study, a rapid, sensitive, and selective method using modified QuECHERS procedure combined with HPLC-MS/MS was established to detect these herbicides in soybean matrices. The limits of quantification were 0.01, 0.01 and 0.025 mg/kg for haloxyfop-methyl, haloxyfop and fomesafen, and 0.005, 0.005 and 0.0125 mg/kg for clomazone in green soybean, soybean grain, and straw, with the average recoveries ranging from 80% to 107%. The terminal residues of the target compounds were all below the corresponding limits of quantification. The dietary risk assessment showed that the risk quotient values were far below the acceptable human consumption levels.

Quality by design with design of experiments approach for development of a stability-indicating LC method for enzalutamide and its impurities in soft gel dosage formulation.

A novel ultra-performance liquid chromatographic (UPLC) method has been developed and approved for the quantitative determination of enzalutamide (ENZ) and its impurities in drug product dosage form by applying the quality by design with design of experiments approach. An efficient chromatographic separation was achieved on a Waters ACQUITY CSH C18 (100 × 2.1 mm × 1.7 µm) column in gradient elution mode. A mixture of potassium phosphate monobasic buffer and acetonitrile (10 mm, adjusted to pH 4.0 with 1% orthophosphoric acid) at a flow rate of 0.2 mL min-1 (column temperature at 40°C) under ultraviolet detection at 270 nm was used for quantitation. The peak resolution among ENZ and its impurities (Impurity-1, Impurity-2, Impurity-3, Impurity-4, Impurity-5, Impurity-6 and Impurity-7) was greater than 2.5. Regression analysis confers an R2 value (correlation coefficient) higher than 0.999 for the active substance and impurities. The detection level for ENZ impurities was at a level below 0.015% (0.12 µg/mL). The accuracy levels for different compounds were close to 100%. The inter- and intra-day precisions for ENZ and impurities were evaluated and their relative standard deviation (%) values were less than 3.5. Our results show that the UPLC-UV stability-indicating method will be an essential tool that could determine the drug product's impurities and be useful in regular quality control and stability studies of the ENZ drug product dosage form.

Isotope fractionation of micropollutants during large-volume extraction: heads-up from a critical method evaluation for atrazine, desethylatrazine and 2,6-dichlorobenzamide at low ng/L concentrations in groundwater.

Micropollutants are frequently detected in groundwater. Thus, the question arises whether they are eliminated by natural attenuation so that pesticide degradation would be observed with increasing residence time in groundwater. Conventional analytical approaches rely on parent compound/metabolite ratios. These are difficult to interpret if metabolites are sorbed or further transformed. Compound-specific stable isotope analysis (CSIA) presents an alternative for identifying degradation based on the analysis of natural isotope abundances in pesticides and their changes during degradation. However, CSIA by gas chromatography-isotope ratio mass spectrometry is challenged by the low concentrations (ng/L) of micropollutants in groundwater. Consequently, large amounts of water need to be sampled requiring enrichment and clean-up steps from interfering matrix effects that must not introduce artefacts in measured isotope values. The aim of this study was to evaluate the accuracy of isotope ratio measurements of the frequently detected micropollutants atrazine, desethylatrazine and 2,6-dichlorobenzamide after enrichment from large water volumes (up to 100 L) by solid-phase extraction with consecutive clean-up by HPLC. Associated artefacts of isotope discrimination were found to depend on numerous factors including organic matter content and extraction volume. This emphasizes the necessity to perform a careful method evaluation of sample preparation and sample pre-treatment prior reliable CSIA.

Electrochemical Behavior and Square-Wave Stripping Voltammetric Determination of Roflumilast in Pharmaceutical Dosage Forms.

BACKGROUND: Bronchial asthma and chronic obstructive pulmonary disease (COPD) are among the most common chronic diseases. Roflumilast is a novel, potent, selective, and long-acting phosphodiesterase 4 (PDE-4) inhibitor for the treatment of bronchial asthma and COPD. It has anti-inflammatory effects, and it has been shown to reduce exacerbations and improve pulmonary function in patients with COPD. Although there have been some other analytical methodologies reported for the determination of roflumilast in pharmaceutical dosage forms, there has not yet been any electrochemical methodology proposed for determination of this unique active pharmaceutical ingredient in its dosage forms. OBJECTIVE: The aim of this study was to develop an easily applied, selective, sensitive, accurate, and precise square-wave stripping voltammetric (SWSV) method for the determination of roflumilast in its pharmaceutical dosage forms. In addition, the electrochemical behavior of roflumilast was investigated. METHODS: The proposed method was based on electrochemical reduction of roflumilast at a hanging mercury drop electrode (HMDE) in 0.1 M K2HPO4 and 0.1 M Na2B4O7 (1:1, v/v) buffer at pH 5.0. Two reduction peaks were observed at -1150 mV and -1260 mV with 30 s of accumulation time and -850 mV of accumulation potential time versus Ag/AgCl reference electrode. RESULTS: The highest peak current values with the best peak definition were observed at a frequency of 50 Hz, scan increment of 5 mV, and pulse amplitude 25 mV. The proposed method was validated by evaluating validation parameters such as linearity, sensitivity, repeatability, accuracy, precision, selectivity, recovery, robustness, and ruggedness. A good linear correlation (r=0.9948) was obtained between the electrochemical response of roflumilast and its concentration in the range of 0.74-3.05 µg mL-1 under the optimum conditions. The obtained accuracy results were between 2.04% and -2.04% while the relative standard deviation of the results was at least 2.78% for intraday and inter-day studies. The mean recovery for the real applications was 100.63% ± 0.52. The electrochemical behavior of roflumilast was investigated by cyclic voltammetry. The cyclic voltammogram of roflumilast exhibited two peaks and the reduction reaction was reversible. CONCLUSION: This developed and validated SWSV method was applied successfully for the determination of roflumilast in tablet dosage form (Daxas®) to assess active roflumilast content. Since high- -performance liquid chromatography is a dominant technique in industry for quality control of active pharmaceutical ingredients, the finding in the present study demonstrated that square-wave stripping voltammetry could be easily utilized in routine applications to determine roflumilast content in its dosage forms.

Optimized residue analysis method for broflanilide and its metabolites in agricultural produce using the QuEChERS method and LC-MS/MS.

Since broflanilide is a newly developed pesticide, analytical methods are required to determine the corresponding pesticide residues in diverse crops and foods. In this study, a pesticide residue analysis method was optimized for the detection and quantification of broflanilide and its two metabolites, DM-8007 and S(PFH-OH)-8007, in brown rice, soybean, apple, green pepper, mandarin, and kimchi cabbage. Residue samples were extracted from the produce using QuEChERS acetate and citrate buffering methods and were purified by dispersive solid-phase extraction (d-SPE) using six different adsorbent compositions with varying amounts of primary secondary amine (PSA), C18, and graphitized carbon black. All the sample preparation methods gave low-to-medium matrix effects, as confirmed by liquid chromatography-tandem mass spectrometry using standard solutions and matrix-matched standards. In particular, the use of the citrate buffering method, in combination with purification by d-SPE using 25 mg of PSA and a mixture of other adsorbents, consistently gave low matrix effects that in the range from -18.3 to 18.8%. Pesticide recoveries within the valid recovery range 70-120% were obtained both with and without d-SPE purification using 25 mg of PSA and other adsorbents. Thus, the developed residue analysis method is viable for the determination of broflanilide and its metabolites in various crops.

Revefenacin Absorption, Metabolism, and Excretion in Healthy Subjects and Pharmacological Activity of Its Major Metabolite.

Revefenacin inhalation solution is an anticholinergic indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease. Mass balance, pharmacokinetics, and metabolism of revefenacin were evaluated after intravenous and oral administration of [14C]-revefenacin in healthy subjects. Pharmacological activity of the major revefenacin metabolite was also assessed. Adult males (n = 9) received 20 µg intravenously of approximately 1 µCi [14C]-revefenacin and/or a single 200-µg oral solution of approximately 10 µCi [14C]-revefenacin. Mean recovery of radioactive material was 81.4% after intravenous administration (54.4% in feces; 27.1% in urine) and 92.7% after oral dosing (88.0% in feces, 4.7% in urine). Mean absolute bioavailability of oral revefenacin was low (2.8%). Intact revefenacin accounted for approximately 52.1% and 13.1% of the total radioactivity in plasma after intravenous and oral administration, respectively. Two main circulating metabolites were observed in plasma. After an intravenous dose, a hydrolysis product, THRX-195518 (M2) was observed that circulated in plasma at 14.3% of total radioactivity. After an oral dose, both THRX-195518 and THRX-697795 (M10, N-dealkylation and reduction of the parent compound) were observed at 12.5% of total circulating radioactivity. THRX-195518 was the major metabolite excreted in feces and comprised 18.8% and 9.4% of the administered intravenous and oral dose, respectively. The major metabolic pathway for revefenacin was hydrolysis to THRX-195518. In vitro pharmacological evaluation of THRX-195518 indicated that it had a 10-fold lower binding affinity for the M3 receptor relative to revefenacin. Receptor occupancy analysis suggested that THRX-195518 has minimal contribution to systemic pharmacology relative to revefenacin after inhaled administration. SIGNIFICANCE STATEMENT: The major metabolic pathway for revefenacin was hydrolysis to the metabolite THRX-195518 (M2), and both revefenacin and THRX-195518 underwent hepatic-biliary and fecal elimination after oral or intravenous administration with negligible renal excretion. Pharmacological evaluation of THRX-195518 indicated that it had a 10-fold lower binding affinity for the M3 muscarinic receptor relative to revefenacin and that THRX-195518 has minimal contribution to systemic pharmacology after inhaled administration.

Low Cost Biomass Derived Biochar Amendment on Persistence and Sorption Behaviour of Flubendiamide in Soil.

Persistence and sorption behaviour of flubendiamide in two different Indian soils as affected by maize stalk biochar was studied. The persistence was more in West Bengal soil (178.6 days) than Sikkim soil (165.3 days) at 10 µg g-1 fortification level. Biochar amendment addition to soil at 5% enhanced the degradation process and half-life (T1/2) values were 103.5 and 117.4 days, respectively for biochar amended Sikkim and West Bengal soil. Sorption study through batch equilibrium method resulted the 4 h equilibrium time with adsorption 6.22% ± 0.16% and 5.26% ± 0.16% in Sikkim and West Bengal soil, respectively. Biochar addition at 5% increased the adsorption of flubendiamide to 8.12% ± 0.16% and 5.88% ± 0.16% indicating a greater influence in this process. The adsorption was more in biochar amended Sikkim soil than West Bengal soil. The values of desorption was slower than adsorption indicating a hysteresis effect having hysteresis coefficient (H1) ranges between 0.025 and 0.151 in two test soils.

Development and validation of a method for the analysis of five diamide insecticides in edible mushrooms using modified QuEChERS and HPLC-MS/MS.

In this study, a new method for simultaneous determination of cyantraniliprole, chlorantraniliprole, tetrachlorantraniliprole, cyclaniliprole and flubendiamide in edible mushrooms by high-performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS) combined with a modified QuEChERS procedure. The samples were extracted using acetonitrile and then cleaned up by primary secondary amine (PSA) and octadecylsilane (C18). The determination of these insecticides was achieved in less than 5 min using an electrospray ionization source in positive mode (ESI+) for cyantraniliprole and chlorantraniliprole, while negative mode (ESI-) for tetrachlorantraniliprole, cyclaniliprole and flubendiamide. The linearities of the calibrations for all target compounds were acceptable (R2 ≥ 0.9922). The limits of detection and quantification were 0.05-2 µg kg-1 and 5 µg kg-1, respectively. Acceptable recoveries (73.5-110.2%) were acquired for these insecticides with RSDs less than 12.7%. The results demonstrated that the proposed method was effective and convenient for the determination of these insecticides in edible mushrooms.

Development and validation of liquid chromatography-tandem mass spectrometry targeted screening of 16 fentanyl analogs and U-47700 in hair: Application to 137 authentic samples.

This study was to validate a LC-MS/MS method for the determination of 17 new synthetic opioids (NSOs) in hair including 3-fluorofentanyl, 3-methylfentanyl, acetylfentanyl, acetylnorfentanyl, alfentanyl, butyrylfentanyl, butyrylnorfentanyl, carfentanil, fentanyl, furanylfentanyl, furanylnorfentanyl, methoxyacetylfentanyl, norcarfentanil, norfentanyl, ocfentanil, sufentanil, and U-47700, and to apply it to 137 authentic samples. Twenty milligrams of hair was decontaminated in dichloromethane and underwent liquid extraction. 10 µL of the reconstituted residue were injected onto the system. The separation was performed in 12 minutes in a gradient mode at a flow rate of 300 µL/min using a Hypersyl Gold PFP column (100 × 2.1 mm i.d., 1.9 µm) maintained at 30°C. Compounds were detected in positive ionization and MRM modes using a TSQ Endura mass spectrometer (ThermoFisher). The method was validated according to EMA guidelines. The LLOQ was in the range 1-50 pg/mg, and the calibration ranged from the LLOQ-1000 pg/mg. Intra- and inter-day accuracy (bias) and precision were < 15%. Extraction recoveries of parent drugs and metabolites were 74-120% and 7-62%, respectively. The matrix effect was in the range 59-126% (CVs ≤ 12.9%). Fentanyl was found in six cases at concentrations of < 1-1650 pg/mg (n = 14 segments). Five fentanyl analogs were quantified in two cases: 3-fluorofentanyl (25-150 pg/mg, n = 5), furanylfentanyl (15-500 pg/mg, n = 5), methoxyacetylfentanyl (500-600 pg/mg, n = 2), acetylfentanyl (1 pg/mg, n = 2), carfentanyl (2.5-3 pg/mg, n = 2). This fully validated method allowed us to test for the first time 3-fluorofentanyl and norcarfentanil in hair among 15 other NSOs, and brings new data regarding 3-fluorofentanyl and methoxyacetylfentanyl hair concentrations.

Understanding polysorbate-compound interactions within the CMC region.

Non-ionic surfactants such as polysorbates, known as Tween™ 20 and Tween™ 80, are routinely used within the healthcare and pharmaceutical industry to enhance solubility. This work focuses on analysing the two aforementioned polysorbates, each considered at three purity levels with four model compounds, across the critical micellar concentration (CMC) range for each surfactant. Such data is of interest to investigate the influence of micelle formation upon compound-polysorbate interaction. Two analytical techniques were utilised, namely spectroscopic solubility determination and micellar liquid chromatography (MLC). In all cases it was apparent that the maximum solubility for all four compounds increased substantially at concentrations greater than the CMC and that, in most cases, a different retention profile was observed using MLC once the CMC had been exceeded. This paper is the first to have used such techniques to investigate the behaviour of these polysorbates over a series of concentrations and three levels of polysorbate purity. The findings indicate that the solubilisation potential of polysorbates differs once the CMC has been surpassed and is dependent upon the level of purity selected, i.e. compound-surfactant interactions are partially a consequence of the presence of micelles rather than monomer as well as polysorbate purity. Thus, formulators should include such polysorbates at optimised concentrations and purity if they wish to maximise their solubilisation potential.

Degradation of fluopyram in water under ozone enhanced microbubbles: Kinetics, degradation products, reaction mechanism, and toxicity evaluation.

The degradation of fluopyram (FLP) was investigated under ozone-microbubble treatment (OMBT). Kinetic models were established to study the influence of three treatments: ozonated water, microbubbles (MCB), and OMBT. FLP degraded completely in OMBT, and a clearance rate of 89.8-100% was achievable. Three direct transformation products [product 1 (F1), product 2 (F2), and product 3(F3)] were isolated and identified using a hybrid ion trap-orbitrap mass spectrometer. Moreover, a transformation theory of FLP degradation was developed according to targeted fragmentation, accurate mass measurements, and degradation profiles. These analyses showed that the products originated from a series of chemical reactions involving dechlorination, hydroxyl substitution, cleavage and oxidation, and were further confirmed based on molecular electrostatic potential and molecular orbital theory. In addition, the stability and toxicity of FLP and its transformation products were tested using the Toxicity Estimation Software Tool (T.E.S.T.) and the Ecological Structure Activity Relationships (ECOSAR) program. Products F1, F2 and F3 were found to be toxic substances, but their toxicity to aquatic organisms was lower than that of FLP. However, they were more toxic to rats than FLP, and their physicochemical properties were more stable. Overall, OMBT is a highly effective method for FLP removal during wastewater treatment.

Attapulgite modified magnetic metal-organic frameworks for magnetic solid phase extraction and determinations of benzoylurea insecticides in tea infusions.

Herein, we developed a novel magnetic solid phase extraction method based on attapulgite-modified magnetic metal-organic frameworks (ATP@Fe3O4@ZIF-8), and this method could be used for the determination of benzoylureas when it was coupled with high-performance liquid chromatography. The established method was validated in terms of linearity (2.5-500 µg L-1, with correlation coefficient (R2) > 0.9994), accuracy (with satisfactory recovery of 88.29-95.99%) and precision (with relative standard deviation (RSD) of less than 8%). In addition, the enrichment factors (EF) ranged from 63.6 to 72.2. Limit of detection (LOD) and limit of quantitation (LOQ) were 0.7-3.2 µg L-1 and 2.3-10.7 µg L-1, respectively. Moreover, there was hardly any noticeable loss of the extraction efficiency when this extraction method undergoes five cycles. Finally, this method was successfully used for the determination of six benzoylureas in different tea infusions and the determined relative recoveries ranged from 78.8 to 114.3%.

Effect of pH on the Hydrolytic Transformation of a New Mixture Formulation of Fomesafen and Quizalofop-ethyl in Water.

A hydrolytic transformation study was conducted in water of pH 4.0, 7.0 and 9.2 to evaluate the effect of pH on persistence of a new readymix formulation of fomesafen and quizalofop-ethyl. The water samples were fortified at 0.5 and 1 µg mL-1 levels and analysed at 0 (2 h), 1, 3, 7, 15, 30, 60, 90, 120, 150 days interval. Both the analytical methods were validated following SANTE guideline and found accurate based on average recovery of 80-100%, Relative standard deviation (RSD) < 20% and Coefficient of Determination (R2) 0.99. The dissipation of both the molecules was pH dependent and followed first order kinetics. Higher persistence of fomesafen was observed in alkaline pH as compared to neutral and acidic pH with half-life of 41.56-63.24 days, whereas higher stability of quizalofop-ethyl was observed in the water of acidic pH followed by neutral and alkaline pH with half-life of 1.26-8.09 days.

Safety, pharmacokinetics and pharmacodynamics of the selective glucocorticoid receptor modulator AZD7594, following inhalation in healthy Japanese volunteers.

INTRODUCTION: AZD7594 is a non-steroidal, selective, glucocorticoid receptor modulator (SGRM), currently in development for the treatment of asthma and chronic obstructive pulmonary disease. This paper reports a randomized placebo-controlled dose escalation study in healthy Japanese male subjects. METHODS: Inhaled AZD7594 was administered as one single dose at day 1 (day 1-4), with subsequent multiple daily doses (day 5-16) via a multiple-dose dry powder inhaler for 12 days of once-daily treatment. At each dose level, subjects were randomized to AZD7594 (n=7) or placebo (n=2). The safety, pharmacokinetics (PK) and pharmacodynamics (PD) of AZD7594 were evaluated. RESULTS: Inhaled AZD7594 was safe and well tolerated up to and including the highest dose 1600 µg tested. Plasma exposure suggested dose-proportional PK. The urinary excretion of AZD7594 was negligible (<0.02%). Dose-related effects were observed for 24 hrs plasma cortisol; however, significant cortisol suppression (25%) was only seen at the highest dose level following multiple doses. There were no or only marginal effects on other biomarkers tested (dehydroepiandrosterone sulfate [DHEA-S] and osteocalcin). CONCLUSION: In conclusion, the early clinical evaluation of inhaled AZD7594 suggests that this novel SGRM is well tolerated in the dose range investigated and also in a Japanese population. It shows dose-proportional plasma exposure, moderate accumulation and has limited impact on systemic markers of glucocorticoid activity.