RESUMEN
The sensitivity and accuracy of fluorescence probes for biological samples are affected by not only interfering molecule compounds but also the nonspecific adsorption of proteins and other macromolecules. Herein, fluorescence probe based on zwitterionic sulfobetaine methacrylate polymer (PSBMA) as an antibiofouling layer and amino boric acid carbon dots encapsulated in the metal-organic framework UiO-66-NH2 (UiO-66-NH2/BN-CDs) as a target recognition site was designed for the detection of baicalin (BAI). Owing to the introduction of BN-CDs into UiO-66-NH2 with high specific surface area, the prepared UiO-66-NH2/BN-CDs@PSBMA probe exhibited a high adsorption capacity of 78.9 mg g-1, while presented fluorescence enhancing and superior fluorescence selectivity to BAI at excitation and emission wavelengths of 400 and 425 nm, respectively. Connecting PSBMA with good hydrophilicity to UiO-66-NH2, resulted in an anti-protein capacity of over 96.3 %, effectively inhibiting protein interference with the fluorescence signal. By virtue of its good antibiofouling and recognizing capacities, the fluorescence probe exhibited a satisfactory detection range of 10-80 nmol L-1, with a fairly low detection limit of 0.0064 µmol L-1. Using the method to detect BAI in Goji berry, Sophora and Yinhuang oral solution, demonstrating its potential for the accurate and quantitative detection of BAI in complex biological samples.
Asunto(s)
Ácidos Borónicos , Carbono , Flavonoides , Colorantes Fluorescentes , Estructuras Metalorgánicas , Puntos Cuánticos , Colorantes Fluorescentes/química , Estructuras Metalorgánicas/química , Ácidos Borónicos/química , Carbono/química , Flavonoides/química , Flavonoides/análisis , Puntos Cuánticos/química , Incrustaciones Biológicas/prevención & control , Polímeros/química , Espectrometría de Fluorescencia/métodos , Límite de Detección , Metacrilatos/química , Adsorción , Betaína/química , Betaína/análogos & derivados , Ácidos FtálicosRESUMEN
The unique amino acid composition of elastin peptide (EP) makes it an excellent resource to obtain antioxidant peptides. It exhibits high elastase inhibitory activity with the potential to resist skin aging and is currently used in a many cosmetic products. However, the inherent low permeability of the skin limits its ability to penetrate the skin. To address this issue, a deep eutectic solvent (SAB) with excellent bioactivity was synthesized from betaine and succinic acid and used as a permeation enhancer to improve the absorption and utilization of EP in this paper. The results showed that low SAB concentrations significantly increased the transdermal delivery of EP. The 3D epidermal skin model (EpiKutis®) demonstrated that SAB/EP induced the synthesis of hyaluronic acid (HA) and filaggrin (FLG), accelerated skin barrier repair, and reduced water loss. Additionally, the zebrafish embryonic model showed that SAB/EP could reduce melanin secretion, decrease melanin deposition, and have an ameliorative effect on skin photoaging. Cellular experiments proved that SAB/EP can stimulate human skin fibroblasts to secrete procollagen I and elastin, improving skin elasticity and anti-wrinkle. The combination of EP and DES is a new attempt that is expected to be used as a safe and effective anti-wrinkle cosmetic material.
Asunto(s)
Administración Cutánea , Betaína , Elastina , Proteínas Filagrina , Envejecimiento de la Piel , Piel , Elastina/metabolismo , Envejecimiento de la Piel/efectos de los fármacos , Humanos , Animales , Betaína/farmacología , Betaína/administración & dosificación , Betaína/química , Betaína/análogos & derivados , Piel/metabolismo , Piel/efectos de los fármacos , Pez Cebra , Fibroblastos/efectos de los fármacos , Fibroblastos/metabolismo , Péptidos/farmacología , Péptidos/administración & dosificación , Péptidos/químicaRESUMEN
Different methods of starch modification have been proposed to broaden its application. In this study, the effects of ternary mixtures of natural crosslinking agents: chitosan-betaine-vanillin and gelatin-betaine-vanillin on the properties of pea starch were explored. These combinations of substances were selected because they have complementary crosslinking mechanisms. The effects of the ternary crosslinker mixtures on the gelatinization, mechanical properties, thermal stability, and microstructure of pea starch were compared. Both combinations of crosslinkers enhanced the gelatinization viscosity, viscoelasticity, gel hardness, and thermal stability of the pea starch, by an amount that depended on the ratio of the different components in the ternary mixtures. In all cases, the crystal structure of the starch granules disappeared after gelatinization. The modified starch had a more compact and uniform microstructure than the non-modified version, especially when it was crosslinked by vanillin, gelatin, and betaine. The improvement in the gelation properties of the starch were primarily attributed to hydrogen bonding, electrostatic attraction, and Schiff base crosslinking of the various components present. Gelatin enhanced the gel strength more than chitosan, which was probably because of greater hydrogen bonding. Our findings suggest that the properties of starch can be enhanced by adding ternary mixtures of natural crosslinkers.
Asunto(s)
Benzaldehídos , Betaína , Quitosano , Reactivos de Enlaces Cruzados , Gelatina , Pisum sativum , Almidón , Gelatina/química , Almidón/química , Quitosano/química , Betaína/química , Benzaldehídos/química , Pisum sativum/química , Reactivos de Enlaces Cruzados/química , Viscosidad , Geles/químicaRESUMEN
The aim of this study was to examine the use of zwitterionic microparticles as new and efficient macromolecular supports for the sorption of an antibiotic (doxycycline hydrochloride, DCH) from aqueous solution. The effect of relevant process parameters of sorption, like dosage of microparticles, pH value, contact time, the initial concentration of drug and temperature, was evaluated to obtain the optimal experimental conditions. The sorption kinetics were investigated using Lagergren, Ho, Elovich and Weber-Morris models, respectively. The sorption efficiency was characterized by applying the Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. The calculated thermodynamic parameters (ΔH, ΔS and ΔG) show that the sorption of doxycycline hydrochloride onto zwitterionic microparticles is endothermic, spontaneous and favorable at higher temperatures. The maximum identified sorption capacity value is 157.860 mg/g at 308 K. The Higuchi, Korsmeyer-Peppas, Baker-Lonsdale and Kopcha models are used to describe the release studies. In vitro release studies show that the release mechanism of doxycycline hydrochloride from zwitterionic microparticles is predominantly anomalous or non-Fickian diffusion. This study could provide the opportunity to expand the use of these new zwitterionic structures in medicine and water purification.
Asunto(s)
Betaína , Doxiciclina , Doxiciclina/química , Betaína/química , Cinética , Adsorción , Termodinámica , Concentración de Iones de Hidrógeno , Antibacterianos/química , Liberación de Fármacos , Temperatura , MicroesferasRESUMEN
Stopping postoperative soft tissue adhesions is one of the most challenging clinical problems that needs to be addressed urgently to avoid secondary injury and pain to patients. Currently, membrane materials with anti-protein adsorption and antibacterial activity are recognized as an effective and promising anti-adhesion barrier to prevent postoperative adhesion and the recurrent adhesion after adhesiolysis. Herein, poly(amino acid) (PAA), which is structurally similar to collagen, is selected as the membrane base material to successfully synthesize PAA-5 membranes with excellent mechanical and degradation properties by in-situ melt polymerization and hot-melt film-forming technology. Subsequently, the co-deposition of polydopamine/polysulfobetaine methacrylate (PDA/PSBMA) coatings induced by CuSO4/H2O2on PAA-5 membranes results in the formation of PDC-5S and PDC-10S, which exhibit excellent hemocompatibility, protein antifouling properties, and cytocompatibility. Additionally, PDC-5S and PDC-10S demonstrated significant antibacterial activity againstEscherichia coliandStaphylococcus aureus, with an inhibition rate of more than 90%. As a result, this study sheds light on newly discovered PAA membranes with anti-protein adsorption and antibacterial activity can sever as one of the promising candidates for the prevention of postoperative peritoneum adhesions.
Asunto(s)
Antibacterianos , Escherichia coli , Peróxido de Hidrógeno , Indoles , Membranas Artificiales , Metacrilatos , Polímeros , Staphylococcus aureus , Antibacterianos/química , Antibacterianos/farmacología , Polímeros/química , Adsorción , Indoles/química , Indoles/farmacología , Metacrilatos/química , Escherichia coli/efectos de los fármacos , Staphylococcus aureus/efectos de los fármacos , Humanos , Peróxido de Hidrógeno/química , Animales , Ensayo de Materiales , Aminoácidos/química , Incrustaciones Biológicas/prevención & control , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Betaína/química , Betaína/análogos & derivados , Adherencias Tisulares/prevención & controlRESUMEN
Natural deep eutectic solvents (NADESs) comprised of osmolytes are of interest as potential biomolecular (cryo)protectants. However, the way these solvents influence the structure and dynamics of biomolecules as well as the role of water remains poorly understood. We carried out principal component analysis of various secondary structure elements of ubiquitin in water and a betaine : glycerol : water (1 : 2 : ζ; ζ = 0, 1, 2, 5, 10, 20, 45) NADES, from molecular dynamics trajectories, to gain insight into the protein dynamics as it undergoes a transition from a highly viscous anhydrous to an aqueous environment. A crossover of the protein's essential dynamics at ζ â¼ 5, induced by solvent-shell coupled fluctuations, is observed, indicating that ubiquitin might (re)fold in the NADES upon water addition at ζ > â¼5. Further, in contrast to water, the anhydrous NADES preserves ubiquitin's essential modes at high temperatures explaining the protein's seemingly enhanced thermal stability.
Asunto(s)
Ubiquitina , Agua , Betaína/química , Glicerol/química , Simulación de Dinámica Molecular , Análisis de Componente Principal , Estructura Secundaria de Proteína , Solventes/química , Ubiquitina/química , Agua/químicaRESUMEN
Allograft transplantation is an important method for tendon reconstruction after injury, and its clinical success highly relies on the storage and transportation of the grafts. Cryopreservation is a promising strategy for tendon storage. In this study, we report a novel cryopreservation agent (CPA) formulation with a high biocompatibility for tendon cryopreservation. Mainly composed of natural zwitterionic betaine and the biocompatible polymer poly(vinylpyrrolidone) (PVP), it exhibited ideal abilities to depress the freezing point and inhibit ice growth and recrystallization. Notably, after cryopreservation via plunge-freezing for 1 month, Young's modulus (144 MPa, 98% of fresh tendons) and ultimate stress (46.7 MPa, 99% of fresh tendons) remained stable, and the cross-linking of collagen microfibers, protein structures, and glycosaminoglycan (GAG) contents changed slightly. These results indicate that the formulation (5 wt % betaine and 5 wt % PVP in phosphate-buffered saline, PBS solution) effectively maintains the biomechanical properties and tissue structure. This work offers a novel cryopreservation method for tendons and may also provide insights into the long-term preservation of various other tissues.
Asunto(s)
Betaína , Criopreservación , Tendones , Criopreservación/métodos , Tendones/efectos de los fármacos , Betaína/química , Animales , Congelación , Crioprotectores/química , Crioprotectores/farmacología , Povidona/química , Colágeno/química , Glicosaminoglicanos/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacologíaRESUMEN
Mycotoxins are representative contaminants causing food losses and food safety problems worldwide. Thymol can effectively inhibit pathogen infestation and aflatoxin accumulation during grain storage, but high volatility limits its application. Here, a thymol-betaine co-crystal system was synthesized through grinding-induced self-assembly. The THY-TMG co-crystal exhibited excellent thermal stability with melting point of 91.2 °C owing to abundant intermolecular interactions. Remarkably, after 15 days at 30 °C, the release rate of thymol from co-crystal was only 55%, far surpassing that of pure thymol. Notably, the co-crystal demonstrated the ability to bind H2O in the environment while controlling the release of thymol, essentially acting as a desiccant. Moreover, the co-crystals effectively inhibited the growth of Aspergillus flavus and the biosynthesis of aflatoxin B1. In practical terms, the THY-TMG co-crystal was successful in preventing AFB1 contamination and nutrients loss in peanuts, thereby prolonging their shelf-life under conditions of 28 °C and 70% RH.
Asunto(s)
Aspergillus flavus , Betaína , Timol , Timol/química , Timol/farmacología , Aspergillus flavus/crecimiento & desarrollo , Aspergillus flavus/efectos de los fármacos , Aspergillus flavus/química , Betaína/química , Betaína/farmacología , Conservantes de Alimentos/farmacología , Conservantes de Alimentos/química , Contaminación de Alimentos/prevención & control , Contaminación de Alimentos/análisis , Preparaciones de Acción Retardada/química , Arachis/química , Arachis/microbiología , Cristalización , Aflatoxinas/química , Aflatoxina B1/químicaRESUMEN
Esterquats constitute a unique group of quaternary ammonium salts (QASs) that contain an ester bond in the structure of the cation. Despite the numerous advantages of this class of compounds, only two mini-reviews discuss the subject of esterquats: the first one (2007) briefly summarizes their types, synthesis, and structural elements required for a beneficial environmental profile and only briefly covers their applications whereas the second one only reviews the stability of selected betaine-type esterquats in aqueous solutions. The rationale for writing this review is to critically reevaluate the relevant literature and provide others with a "state-of-the-art" snapshot of choline-type esterquats and betaine-type esterquats. Hence, the first part of this survey thoroughly summarizes the most important scientific reports demonstrating effective synthesis routes leading to the formation of both types of esterquats. In the second section, the susceptibility of esterquats to hydrolysis is explained, and the influence of various factors, such as the pH, the degree of salinity, or the temperature of the solution, was subjected to thorough analysis that includes quantitative components. The next two sections refer to various aspects associated with the ecotoxicity of esterquats. Consequently, their biodegradation and toxic effects on microorganisms are extensively analyzed as crucial factors that can affect their commercialization. Then, the reported applications of esterquats are briefly discussed, including the functionalization of macromolecules, such as cotton fabric as well as their successful utilization on a commercial scale. The last section demonstrates the most essential conclusions and reported drawbacks that allow us to elucidate future recommendations regarding the development of these promising chemicals.
Asunto(s)
Betaína , Cationes , Colina , Betaína/química , Betaína/análogos & derivados , Colina/química , Colina/análogos & derivados , Cationes/química , Ésteres/química , Compuestos de Amonio Cuaternario/química , HumanosRESUMEN
This research intended to remove residual protein from chitin with proteases in deep eutectic solvents (DESs). The activities of some proteases in several DESs, including choline chloride/p-toluenesulfonic acid, betaine/glycerol (Bet/G), choline chloride/malic acid, choline chloride/lactic acid, and choline chloride/urea, which are capable of dissolving chitin, were tested, and only in Bet/G some proteases were found to be active, with subtilisin A, ficin, and bromelain showing higher activity than other proteases. However, the latter two proteases caused degradation of chitin molecules. Further investigation revealed that subtilisin A in Bet/G did not exhibit "pH memory", which is a universal characteristic displayed by enzymes dispersed in organic phases, and the catalytic characteristics of subtilisin A in Bet/G differed significantly from those in aqueous phase. The conditions for protein removal from chitin by subtilisin A in Bet/G were determined: Chitin dissolved in Bet/G with 0.5 % subtilisin A (442.0 U/mg, based on the mass of chitin) was hydrolyzed at 45 °C for 30 min. The residual protein content in chitin decreased from 5.75 % ± 0.10 % to 1.01 % ± 0.12 %, improving protein removal by 57.20 % compared with protein removal obtained by Bet/G alone. The crystallinity and deacetylation degrees of chitin remained unchanged after the treatment.
Asunto(s)
Betaína , Quitina , Disolventes Eutécticos Profundos , Glicerol , Quitina/química , Betaína/química , Glicerol/química , Disolventes Eutécticos Profundos/química , Hidrólisis , Subtilisina/metabolismo , Subtilisina/química , Concentración de Iones de Hidrógeno , Péptido Hidrolasas/metabolismo , Péptido Hidrolasas/química , Colina/químicaRESUMEN
Blood-contact medical devices are indispensable for clinical interventions, yet their susceptibility to thrombosis and bacterial infections poses substantial risks to treatment efficacy and patient well-being. This study introduces a polysulfobetaine/alginate-CuII (SAC) zwitterionic hydrogel coating on polyurethane (PU) surfaces. This approach retains the superhydrophilic and antifouling nature of pSBMA while conferring the antibacterial effects of copper ions. Meanwhile, the copper alginate network intertwines with the polysulfobetaine (pSBMA) network, enhancing its mechanical properties and overcoming inherent weaknesses, thereby improving coating durability. Compared to the substrate, the SAC hydrogel coating significantly reduces thrombus adhesion mass by approximately 81.5% during extracorporeal blood circulation and effectively prevents bacterial biofilm formation even in a high-concentration bacterial milieu over 30 days. Moreover, the results from an isolated blood circulation model in New Zealand white rabbits affirm the impressive anticoagulant efficacy of the SAC hydrogel coating. The findings suggest that this hydrogel coating and its application method hold promise as a solution for blood-contact material surface modification to address thrombosis and bacterial biofilm formation simultaneously.
Asunto(s)
Biopelículas , Coagulación Sanguínea , Hidrogeles , Animales , Conejos , Biopelículas/efectos de los fármacos , Coagulación Sanguínea/efectos de los fármacos , Hidrogeles/química , Hidrogeles/farmacología , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Trombosis/prevención & control , Alginatos/química , Alginatos/farmacología , Infecciones Bacterianas/prevención & control , Infecciones Bacterianas/tratamiento farmacológico , Poliuretanos/química , Poliuretanos/farmacología , Betaína/química , Betaína/análogos & derivados , Betaína/farmacología , Cobre/química , Cobre/farmacología , Antibacterianos/química , Antibacterianos/farmacologíaRESUMEN
Zwitterionic polymers have emerged as an important class of biomaterials to construct wound dressings and antifouling coatings over the past decade due to their excellent hydrophilicity. However, all the reported zwitterionic polymers as wound dressings are nondegradable because of noncleavable carbonâcarbon bonding backbones, and must be removed periodically after treatment to avoid hypoxia in the wound, thus leading to potential secondary injury. In this work, a biodegradable polyzwitterion patch is fabricated for the first time by ring-opening polymerization of carboxybetaine dithiolane (CBDS), which is self-crosslinked via inter-amide hydrogen bonds and zwitterionic dipole-dipole interactions on the side chains. The unprecedented polyCBDS (PCBDS) patch demonstrates enough ductility owing to the intermolecular physical interactions to fully cover irregular wounds, also showing excellent biodegradability and antifouling performance resulted from the existence of disulfide bonds and carboxybetaine groups. Besides, the PCBDS degradation-induced released CBDS owns potent antioxidant and antibacterial activities. This PCBDS patch is used as a diabetic wound dressing, inhibiting bacterial adhesion on the external surface, and its degradation products can exactly kill bacteria and scavenge excessive reactive oxygen species (ROS) at the wound site to regulate local microenvironment, including regulation of cytokine express and macrophage polarization, accelerating infected diabetic wound repair, and also avoiding the potential secondary injury.
Asunto(s)
Antibacterianos , Cicatrización de Heridas , Cicatrización de Heridas/efectos de los fármacos , Animales , Ratones , Antibacterianos/química , Antibacterianos/farmacología , Vendajes , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Polímeros/química , Polímeros/farmacología , Especies Reactivas de Oxígeno/metabolismo , Antioxidantes/química , Antioxidantes/farmacología , Adhesión Bacteriana/efectos de los fármacos , Betaína/química , Betaína/análogos & derivados , Betaína/farmacología , Staphylococcus aureus/efectos de los fármacos , Células RAW 264.7RESUMEN
Various studies have shown that Hypogymnia physodes are a source of many biologically active compounds, including lichen acids. These lichen-specific compounds are characterized by antioxidant, antiproliferative, and antimicrobial properties, and they can be used in the cosmetic and pharmaceutical industries. The main aim of this study was to optimize the composition of natural deep eutectic solvents based on proline or betaine and lactic acid for the extraction of metabolites from H. physodes. The design of the experimental method and the response surface approach allowed the optimization of the extraction process of specific lichen metabolites. Based on preliminary research, a multivariate model of the experiment was developed. For optimization, the following parameters were employed in the experiment to confirm the model: a proline/lactic acid/water molar ratio of 1:2:2. Such a mixture allowed the efficient extraction of three depsidones (i.e., physodic acid, physodalic acid, 3-hydroyphysodic acid) and one depside (i.e., atranorin). The developed composition of the solvent mixtures ensured good efficiency when extracting the metabolites from the thallus of H. physodes with high antioxidant properties.
Asunto(s)
Depsidos , Lactonas , Depsidos/química , Depsidos/aislamiento & purificación , Depsidos/farmacología , Lactonas/química , Lactonas/aislamiento & purificación , Lactonas/farmacología , Disolventes Eutécticos Profundos/química , Antioxidantes/química , Antioxidantes/farmacología , Antioxidantes/aislamiento & purificación , Prolina/química , Líquenes/química , Ácido Láctico/química , Tecnología Química Verde/métodos , Betaína/química , Betaína/análogos & derivados , Betaína/farmacología , Solventes/química , Dibenzoxepinas , HidroxibenzoatosRESUMEN
Polyurethane (PU) catheters are commonly used in clinical treatment. However, the hydrophobic nature of the PU catheter surface leads to adhesion or adsorption to platelets, proteins, bacteria, and other molecules when used in human treatment. To achieve a surface with strong hydrophilicity, high stability and excellent biocompatibility, it is necessary to functionalize the PU catheters. In this paper, a coating with antifouling function was constructed on the surface of PU catheters using plasma technology and an amide coupling reaction. A series of characterization methods, including X-ray photoelectron spectroscopy (XPS), water contact angles (WCA), and atomic force microscopy (AFM), were used to prove the successful modification of the polymer coatings. The coatings showed good stability under conditions such as PBS (pH 7.4, 720 h), 75% ethanol (6 h) and 1 wt% SDS (10 min). Additionally, the coatings exhibit excellent hemocompatibility and antibacterial properties. The PU/PEI/PCSB coating has the best anti-fouling performance among them, which means that using the PCSB copolymer has the potential to modify different clinical catheters into highly effective antifouling coatings.
Asunto(s)
Betaína , Propiedades de Superficie , Humanos , Betaína/química , Betaína/análogos & derivados , Betaína/farmacología , Poliuretanos/química , Poliuretanos/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Antibacterianos/síntesis química , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Incrustaciones Biológicas/prevención & control , Staphylococcus aureus/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Animales , Ensayo de Materiales , Polímeros/química , Polímeros/farmacologíaRESUMEN
Addressing the pervasive issue of bacteria and biofilm infections is crucial in the development of advanced antifouling wound dressings. In this study, a novel wound healing treatment using sulfobetaine (SBMA) decorated electrospun fibrous membrane based on polycaprolactone (PCL)/nitric oxide (NO) donors was developed. The fabrication involved a dual strategy, first integrating NO donors into mesoporous polydopamine (MPDA) and complexed with PCL/PEI to electrospin nanofibers. The fibrous membrane exhibited a potent antibacterial response upon irradiation at 808 nm, owing to a combination of NO and photothermal effect that effectively targets bacteria and disrupts biofilms. Surface functionalization of the membrane with PEI allowed for the attachment of SBMA via Michael addition, fabricating a zwitterionic surface, which significantly hinders protein adsorption and reduces biofilm formation on the wound dressing. In vitro and in vivo assessments confirmed the rapid bactericidal capabilities and its efficacy in biofilm eradication. Combining photothermal activity, targeted NO release and antifouling surface, this multifaceted wound dressing addresses key challenges in bacterial infection management and biofilm eradication, promoting efficient wound healing.
Asunto(s)
Antibacterianos , Vendajes , Betaína , Biopelículas , Indoles , Nanofibras , Poliésteres , Cicatrización de Heridas , Antibacterianos/farmacología , Antibacterianos/química , Antibacterianos/administración & dosificación , Biopelículas/efectos de los fármacos , Animales , Cicatrización de Heridas/efectos de los fármacos , Poliésteres/química , Indoles/química , Indoles/farmacología , Betaína/química , Betaína/farmacología , Betaína/análogos & derivados , Nanofibras/química , Polímeros/química , Óxido Nítrico/metabolismo , Staphylococcus aureus/efectos de los fármacos , Incrustaciones Biológicas/prevención & control , Donantes de Óxido Nítrico/farmacología , Donantes de Óxido Nítrico/química , Ratones , Propiedades de Superficie , Escherichia coli/efectos de los fármacos , Polietileneimina/químicaRESUMEN
Pulmonary delivery of protein therapeutics poses significant challenges that have not been well addressed in the research literature or practice. In fact, there is currently only one commercial protein therapeutic that is delivered through aerosolization and inhalation. In this study, we propose a drug delivery strategy that enables a high-concentration dosage for the pulmonary delivery of antibodies as an aerosolizable solid powder with desired stability. We utilized zwitterionic polymers for their promising properties as drug delivery vehicles and synthesized swellable, biodegradable poly(sulfo-betaine) (pSB) microparticles. The microparticles were loaded with Immunoglobulin G (IgG) as a model antibody. We quantified the microparticle size and morphology, and the particles were found to have an average diameter of 1.6 µm, falling within the optimal range (~1-5 µm) for pulmonary drug delivery. In addition, we quantified the impact of the crosslinker to monomer ratio on particle morphology and drug loading capacity. The results showed that there is a trade-off between desired morphology and drug loading capacity as the crosslinker density increases. In addition, the particles were aerosolized, and our data indicated that the particles remained intact and retained their initial morphology and size after aerosolization. The combination of morphology, particle size, antibody loading capacity, low cytotoxicity, and ease of aerosolization support the potential use of these particles for pulmonary delivery of protein therapeutics.
Asunto(s)
Aerosoles , Betaína , Betaína/análogos & derivados , Tamaño de la Partícula , Betaína/química , Humanos , Administración por Inhalación , Inmunoglobulina G/química , Inmunoglobulina G/administración & dosificación , Sistemas de Liberación de Medicamentos/métodos , Polímeros/química , Portadores de Fármacos/química , Animales , Anticuerpos/química , MicroesferasRESUMEN
The emergence of multidrug-resistant bacteria along with their resilient biofilms necessitates the development of creative antimicrobial remedies. We designed versatile fluorinated polymer micelles with surface-charge-switchable properties, demonstrating enhanced efficacy against Methicillin-Resistant Staphylococcus Aureus (MRSA) in planktonic and biofilm states. Polymethacrylate diblock copolymers with pendant fluorocarbon chains and carboxyl betaine groups were prepared using reversible addition-fragmentation chain transfer polymerization. Amphiphilic fluorinated copolymers self-assembled into micelles, encapsulating ciprofloxacin in their cores (CIP@FCBMs) for antibacterial and antibiofilm applications. As a control, fluorine-free copolymer micelles loaded with ciprofloxacin (CIP@BCBMs) were prepared. Although both CIP@FCBMs and CIP@BCBMs exhibited pH-responsive surface charges and lipase-triggered drug release, CIP@FCBMs exhibited powerful antimicrobial and antibiofilm activities in vitro and in vivo, attributed to superior serum stability, higher drug loading, enhanced fluorination-facilitated cellular uptake, and lipase-triggered drug release. Collectively, reversing surface charge, on-demand antibiotic release, and fluorination-mediated nanoparticles hold promise for treating bacterial infections and biofilms.
Asunto(s)
Antibacterianos , Betaína , Biopelículas , Ciprofloxacina , Lipasa , Staphylococcus aureus Resistente a Meticilina , Infecciones Estafilocócicas , Staphylococcus aureus Resistente a Meticilina/efectos de los fármacos , Antibacterianos/farmacología , Antibacterianos/administración & dosificación , Antibacterianos/química , Biopelículas/efectos de los fármacos , Lipasa/metabolismo , Concentración de Iones de Hidrógeno , Animales , Betaína/química , Betaína/administración & dosificación , Betaína/análogos & derivados , Infecciones Estafilocócicas/tratamiento farmacológico , Ciprofloxacina/farmacología , Ciprofloxacina/administración & dosificación , Ciprofloxacina/química , Fluorocarburos/química , Fluorocarburos/farmacología , Micelas , Liberación de Fármacos , Polímeros/química , Humanos , Ácidos Polimetacrílicos/químicaRESUMEN
Organisms use organic molecules called osmolytes to adapt to environmental conditions. In vitro studies indicate that osmolytes thermally stabilize proteins, but mechanisms are controversial, and systematic studies within the cellular milieu are lacking. We analyzed Escherichia coli and human protein thermal stabilization by osmolytes in situ and across the proteome. Using structural proteomics, we probed osmolyte effects on protein thermal stability, structure and aggregation, revealing common mechanisms but also osmolyte- and protein-specific effects. All tested osmolytes (trimethylamine N-oxide, betaine, glycerol, proline, trehalose and glucose) stabilized many proteins, predominantly via a preferential exclusion mechanism, and caused an upward shift in temperatures at which most proteins aggregated. Thermal profiling of the human proteome provided evidence for intrinsic disorder in situ but also identified potential structure in predicted disordered regions. Our analysis provides mechanistic insight into osmolyte function within a complex biological matrix and sheds light on the in situ prevalence of intrinsically disordered regions.
Asunto(s)
Escherichia coli , Estabilidad Proteica , Proteoma , Proteoma/metabolismo , Proteoma/química , Humanos , Escherichia coli/metabolismo , Temperatura , Betaína/química , Betaína/metabolismo , Proteínas de Escherichia coli/química , Proteínas de Escherichia coli/metabolismo , Trehalosa/química , Trehalosa/metabolismo , Proteómica/métodos , Prolina/química , Prolina/metabolismo , Glucosa/química , Glucosa/metabolismo , Glicerol/química , Glicerol/metabolismo , MetilaminasRESUMEN
INTRODUCTION: Lignin has great potential as the most abundant renewable phenolic polymer. Studies have shown that lignin structure varies depending on different sources and different extraction methods. However, there are few studies on lignin in kudzu root residue. OBJECTIVES: The aim of the study was to explore optimal extraction conditions of Pueraria lobata residue lignin (PLL) with deep eutectic solvents (DESs) and characterise the structure and morphology of PLL. METHODS: Firstly, the chemical composition of kudzu root residue was determined by the Van-soest method. Then, betaine was used as hydrogen bond acceptor (HBA), nine kinds of common acids and alcohol were selected as hydrogen bond donor (HBD) to synthesise a DES to extract lignin from kudzu root residue. The influence of conditions on the extraction of PLL was explored by a betaine-based DES according to a single-factor experiment, and then the best process of PLL extraction was determined by an orthogonal experiment. Finally, the morphology and structure of PLL were analysed by scanning electron microscope (SEM), thermogravimetric analysis (TGA), gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and NMR. RESULTS: Cellulose, hemicellulose, lignin, and ash content in kudzu root residue were 41.13%, 16.39%, 25.03%, and 0.41%, respectively. When the DES consisted of betaine and formic acid, the solid-liquid ratio was 1:45, the extraction time was 5.5 h at 160°C, the extraction yield of lignin was 89.29%, and the purity was 83.01%. PLL was composed of interconnected spherical particles with good thermal stability and narrow polydispersity index (PDI) distribution. FTIR and 2D-heteronuclear singular quantum correlation (HSQC) NMR illustrated that PLL was a typical G-type and S-type lignin. CONCLUSION: This study would fill the gap of research on lignin in kudzu root residue and provide a theoretical reference for the utilisation of lignin in kudzu roots as well as a new thinking for the recycling of kudzu root resources.
Asunto(s)
Disolventes Eutécticos Profundos , Lignina , Raíces de Plantas , Pueraria , Lignina/química , Lignina/aislamiento & purificación , Raíces de Plantas/química , Pueraria/química , Disolventes Eutécticos Profundos/química , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Termogravimetría , Espectroscopía de Resonancia Magnética , Betaína/química , Microscopía Electrónica de RastreoRESUMEN
Rapid and effective separation of nucleotides (NTs) and their derivatives is crucial for studying their physiological functions. In this work, we comprehensively evaluated the separation ability of a zwitterionic hydrophilic monolith, i.e., poly(N,N-dimethyl-N-(3-methacrylamidopropyl)-N-(3-sulfopropyl)ammonium betaine-co-N,N'-methylenebisacrylamide) (poly(SPP-co-MBA)) for NTs analysis, including its selectivity, chemical stability under extremely basic condition and compatibility with hydrophilic interaction liquid chromatography (HILIC) coupled with mass spectrometry (HILIC-MS). The poly(SPP-co-MBA) monolith exhibited excellent chemical stability, as evidenced by the low relative standard deviation of retention time (0.16-1.05%) after 4000 consecutive injections over one month under strong alkaline elution condition (pH 10). After optimizing the separation conditions, including buffer pH and concentration, organic solvent content and column temperature, four nucleoside triphosphates, five nucleoside diphosphates and five nucleoside monophosphates were baseline separated within 7 min. Additionally, the mixtures containing one nucleoside and its corresponding mono-, di-, and triphosphates were baseline separated within only 3 min, respectively. It is good HILIC-MS compatibility was also confirmed by the satisfactory peak shape and high response of nine NTs. Overall, the proposed poly(SPP-co-MBA) monolith exhibited good mechanical stability and compatibility of HILIC-MS, making it a promising technique for NTs analysis.