In vivo Microbial Diversity Analysis on Different Surfaces of Dental Restorative Materials via 16S rDNA Sequencing.

BACKGROUND This study aimed to provide precise material selection guidance for proper clinical restoration and treatment of plaque-related oral diseases, such as dental caries and periodontal diseases. MATERIAL AND METHODS Four groups (n=24) of restorative material sheets (n=24) were prepared using 3M Z350 composite resin (ZR), zinc phosphate cement (ZPC), glass-ionomer (GI), and ICON permeable resin (IPR). Six volunteers wore a plaque-collection device equipped with the 4 restorative material sheets for 48 hours. Plaque samples were collected, and Miseq sequencing was applied to obtain template DNA fragments for microbial diversity analysis. The data were analyzed with nonparametric tests. RESULTS The microbial diversity on the ZPC surface was significantly lower than that on GI and IPR surfaces. The abundance of Firmicutes and Streptococcus on the ZPC surface was significantly higher than on the surfaces of GI and IPR. In contrast, the abundance of Porphyromonas on the surface of ZPC was significantly lower than that on GI and IPR surfaces. (P<0.05). CONCLUSIONS The results of the present study might serve as a basis for material selection under different oral microbial conditions to provide more accurate treatments and restorative procedures in the oral cavity.

Histopathological Effects of Bone Cement on Cartilage Tissue.

INTRODUCTION: Glass ionomer bone cement is frequently applied with cartilage grafts in otology, even as a single unit. OBJECTIVE: This experimental study was performed to investigate the histopathological effects of bone cement on cartilage tissue. METHODS: The study was conducted between January 2018 and April 2018 and used 12 New Zealand White rabbits. The right ears of the rabbits constituted the study group, while the left ears were the controls. Ketac Cem Radiopaque (3 M Germany) was used as glass ionomer cement. Tissue samples from the rabbits were subjected to histopathological analysis to compare acute and chronic inflammation, foreign body reaction, angiogenesis, collagenesis, fibrosis, necrosis, cartilage fracture, osseous metaplasia, and loss of chondrocyte nuclei between the groups. RESULTS: The rates of cartilage fracture (P = 0.044), foreign body reaction (P < 0.001), acute inflammation (P = 0.009), chronic inflammation (P = 0.002), and angiogenesis (P = 0.003) were significantly higher in the study group compared with the controls. The study group showed some degree of necrosis; no necrosis was observed in the control group, but the difference was not statistically significant (P = 0.101). There were no significant differences in fibrosis, collagenesis, osseous metaplasia, or loss of chondrocyte nuclei between the groups. CONCLUSIONS: This study showed that application of bone cement can cause acute and chronic inflammation, foreign body reactions, angiogenesis, and cartilage fractures. Further studies are needed to determine the long-term effects of bone cement on cartilage.

The Effect of Silver Diamine Fluoride in Preventing Caries in the Primary Dentition: A Systematic Review and Meta-Analysis.

OBJECTIVES: To investigate whether silver diamine fluoride (SDF) is effective in preventing new caries lesions in primary teeth when compared to placebo or active treatments. METHODS: Systematic review (CRD42016036963) of controlled clinical trials. Searches were performed in 9 electronic databases, 5 registers of ongoing trials, and reference lists of identified review articles. Two researchers carried out data extraction and quality appraisal independently. The primary outcome was the difference in caries increment (decayed, missing, and filled surfaces or teeth - dmfs or dmft) between SDF and control groups. These differences were pooled as weighted mean differences (WMD) and prevented fractions (PF). RESULTS: Searches yielded 2,366 unique records; 6 reports of 4 trials that randomized 1,118 and analyzed 915 participants were included. Two trials compared SDF to no treatment, 1 compared SDF to placebo and sodium fluoride varnish (FV), and 1 compared SDF to high-viscosity glass ionomer cement (GIC). All studies had at least 1 domain with unclear or high risk of bias. After 24 months of follow-up, in comparison to placebo, no treatment, and FV, SDF applications significantly reduced the development of new dentin caries lesions (placebo or no treatment: WMD = -1.15, PF = 77.5%; FV: WMD = -0.43, PF = 54.0%). GIC was more effective than SDF after 12 months of follow-up but the difference between them was not statistically significant (WMD, dmft: 0.34, PF: -6.09%). CONCLUSION: When applied to caries lesions in primary teeth, SDF compared to no treatment, placebo or FV appears to effectively prevent dental caries in the entire dentition. However, trials specifically designed to assess this outcome are needed.

Resin-modified glass ionomer cement vs composite for orthodontic bonding: A multicenter, single-blind, randomized controlled trial.

INTRODUCTION: In this study, we aimed to compare the incidence of new demineralized lesions and bond failures between 2 groups of participants wearing fixed orthodontic appliances bonded with either light-cured resin-modified glass ionomer cement or light-cured composite. METHODS: This trial was a multicenter (6 centers: 2 teaching hospitals, 4 specialist orthodontic practices), single-blinded, randomized controlled trial with 2 parallel groups. Patients aged 11 years or older, in the permanent dentition, and about to start fixed orthodontic treatment in these 6 centers were randomly allocated to have either resin-modified glass ionomer cement or light-cured composite for bonding brackets, forward of the first molars. Pretreatment and day-of-debond digital photographic images were taken of the teeth and assessed by up to 5 clinical and 3 lay assessors for the presence or absence of new demineralized lesions and the esthetic impact. The assessors were masked as to group allocation. RESULTS: We randomized 210 participants, and 197 completed the trial. There were 173 with complete before-and after-digital images of the teeth. The incidence of new demineralized lesions was 24%; but when the esthetic impact was taken into account, this was considerably lower (9%). There was no statistically significant difference between the bracket adhesives in the numbers with at least 1 new demineralized lesion (risk ratio,1.25; 95% confidence interval, 0.74-2.13; P = 0.403) or first-time bracket failure (risk ratio,0.88; 95% confidence interval, 0.67-1.16; P = 0.35). There were no adverse effects. CONCLUSIONS: There is no evidence that the use of resin modified glass ionomer cement over light-cured composite for bonding brackets reduces the incidence of new demineralized lesions or bond failures. There might be other reasons for using resin modified glass ionomer cement. REGISTRATION: This trial was registered at ClinicalTrials.govNCT01925924. PROTOCOL: The protocol is available from the corresponding author on request.

Evaluation of Radiopacity of Luting Cements Submitted to Different Aging Procedures.

PURPOSE: To evaluate the radiopacity of luting cements submitted to different aging procedures. MATERIALS AND METHODS: Twenty discs (1 × 4 mm) of each of the following cements were prepared: zinc phosphate, RelyX Luting 2, Variolink 2, AllCem, RelyX U200, Multilink, Panavia F2.0, and RelyX ARC. Then, they were randomly divided into two groups (n = 10/group), according to the aging procedure: thermal cycling group and water storage group. Before and after aging procedures, specimens were x-rayed with an aluminum step-wedge (11 steps, 1 mm thick each) and three dental slices (1 mm thick). The radiopacity was evaluated by means of optical density, which was measured using ImageJ software. The values were converted into millimeters of aluminum with a logistic regression calibration curve. The data were analyzed by one-way ANOVA and Tukey post-hoc test (α = 0.05). RESULTS: In the thermal cycling group, RelyX Luting 2, RelyX U200, and Panavia F2.0 showed a statistically significant reduction in radiopacity (p < 0.05). In the water storage group, all cements showed a significant reduction in radiopacity (p < 0.05), and RelyX Luting 2 and Panavia F2.0 performed below the desired ISO 4049 standard. CONCLUSIONS: The radiopacity of luting cements can decrease after aging, especially after 1-year water storage.

Hydroxyapatite decreases cytotoxicity of a glass ionomer cement by calcium fluoride uptake in vitro.

BACKGROUND: Glass ionomer cements (GICs) are widely used in dentistry because of their remineralizing and cariostatic potential induced by fluoride. In vitro studies have reported cell toxicity triggered by GICs; however, the influence of hydroxyapatite (HAp) must be considered. The aim of this study was to evaluate the effect of HAp in decreasing the cytotoxicity of the GIC 3M Vitrebond in vitro. METHODS: Samples of 3M Vitrebond (powder, liquid and light-cured) were incubated in Dulbecco's modified Eagle's medium-Ham's F12 (DMEM-F12) for 24 hours at 37°C. Subsequently, the light-cured medium was treated with 100 mg/mL of HAp overnight. Toxicity of conditioned media diluted 1:2, 1:4, 1:8 and 1:20 was analyzed on human gingival fibroblasts (HGFs) using light microscopy and the fluorometric microculture cytotoxicity assay. The amounts of calcium fluoride (CaF2) were determined by the alizarin red S method. RESULTS: The exposure of HGFs to light-cured induced cell death and morphological changes such as chromatin condensation, pyknotic nuclei and cytoplasmic modifications. Exposure to light-cured treated with HAp, significantly increased cell viability leading to mostly spindle-shaped cells (p<0.001). The concentration of CaF2 released by the light-cured was 200 ppm, although, in the light-cured/HAp conditioned medium, this quantity decreased to 88 ppm (p<0.01). CONCLUSIONS: These data suggest that HAp plays a protective role, decreasing the cytotoxic effect of 3M Vitrebond induced by CaF2.

Effect of Light Activation of Pulp-Capping Materials and Resin Composite on Dentin Deformation and the Pulp Temperature Change.

OBJECTIVES: To analyze the effect of pulp-capping materials and resin composite light activation on strain and temperature development in the pulp and on the interfacial integrity at the pulpal floor/pulp-capping materials in large molar class II cavities. METHODS: Forty extracted molars received large mesio-occlusal-distal (MOD) cavity bur preparation with 1.0 mm of dentin remaining at the pulp floor. Four pulp-capping materials (self-etching adhesive system, Clearfil SE Bond [CLE], Kuraray), two light-curing calcium hydroxide cements (BioCal [BIO], Biodinâmica, and Ultra-Blend Plus [ULT], Ultradent), and a resin-modified glass ionomer cement- (Vitrebond [VIT], 3M ESPE) were applied on the pulpal floor. The cavities were incrementally restored with resin composite (Filtek Z350 XT, 3M ESPE). Thermocouple (n=10) and strain gauge (n=10) were placed inside the pulp chamber in contact with the top of the pulpal floor to detect temperature changes and dentin strain during light curing of the pulp-capping materials and during resin composite restoration. Exotherm was calculated by subtracting postcure from polymerization temperature (n=10). Interface integrity at the pulpal floor was investigated using micro-CT (SkyScan 1272, Bruker). The degree of cure of capping materials was calculated using the Fourier transform infrared and attenuated total reflectance cell. Data were analyzed using one-way analysis of variance followed by the Tukey test (α=0.05). RESULTS: Pulpal dentin strains (µs) during light curing of CLE were higher than for other pulp-capping materials ( p<0.001). During resin composite light activation, the pulpal dentin strain increased for ULT, VIT, and CLE and decreased for BIO. The pulpal dentin strain was significantly higher during pulp-capping light activation. The temperature inside the pulp chamber increased approximately 3.5°C after light curing the pulp-capping materials and approximately 2.1°C after final restoration. Pulp-capping material type had no influence temperature increase. The micro-CT showed perfect interfacial integrity after restoration for CLE and ULT; however, gaps were found between BIO and pulpal floor in all specimens. BIO had a significantly lower degree of conversion than ULT, VIT, and CLE. CONCLUSIONS: Light curing of pulp-capping materials caused deformation of pulpal dentin and increased pulpal temperature in large MOD cavities. Shrinkage of the resin composite restoration caused debonding of BIO from the pulpal floor.

Quantitative analysis of enamel on debonded orthodontic brackets.

INTRODUCTION: Iatrogenic damage to the tooth surface in the form of enamel tearouts can occur during removal of fixed orthodontic appliances. The aim of this study was to assess debonded metal and ceramic brackets attached with a variety of bonding materials to determine how frequently this type of damage occurs. METHODS: Eighty-one patients close to finishing fixed orthodontic treatment were recruited. They had metal brackets bonded with composite resin and a 2-step etch-and-bond technique or ceramic brackets bonded with composite resin and a 2-step etch-and- bond technique, and composite resin with a self-etching primer or resin-modified glass ionomer cement. Debonded brackets were examined by backscattered scanning electron microscopy with energy dispersive x-ray spectroscopy to determine the presence and area of enamel on the base pad. RESULTS: Of the 486 brackets collected, 26.1% exhibited enamel on the bonding material on the bracket base pad. The incidences of enamel tearouts for each group were metal brackets, 13.3%; ceramic brackets, 30.2%; composite resin with self-etching primer, 38.2%; and resin-modified glass ionomer cement, 21.2%. The percentage of the bracket base pad covered in enamel was highly variable, ranging from 0% to 46.1%. CONCLUSIONS: Enamel damage regularly occurred during the debonding process with the degree of damage being highly variable. Damage occurred more frequently when ceramic brackets were used (31.9%) compared with metal brackets (13.3%). Removal of ceramic brackets bonded with resin-modified glass ionomer cement resulted in less damage compared with the resin bonding systems.

Effects of glass ionomer cement on facial nerve: a clinical and histopathologic evaluation.

OBJECTIVE: The aim of this study was to investigate the clinical and histopathologic effects of glass ionomer cement (GIC) on facial nerve. METHODS: Eight Wistar albino rats were included in the study. Under general anesthesia, bilateral facial nerves of rats were dissected. Saline was injected into right facial nerves, while GIC was dropped on left facial nerves. Facial nerve functions of the rats were evaluated using mustache and bling reflex scores everyday along 14 days. On the 14th day, rats were sacrificed, and facial nerves examined in terms of inflammation, granulation tissue, and foreign body reaction. The clinical and histopathologic changes on facial nerves were compared for both groups. RESULTS: In clinical evaluation, facial nerve functions did not significantly differ between two groups (p = .301). On histopathologic examination, bone cement group had significantly more foreign body reaction, granulation tissue, and inflammation compared with the control group (p = .001; p = .002; p = .003, respectively). CONCLUSIONS: Bone cement directly applied on the nerve causes foreign body reaction increased inflammation and granulation tissue. Nonetheless it does not lead to a permanent facial nerve dysfunction.

Effect of 3 cements on white spot lesion formation after full-coverage rapid maxillary expander: A comparative in-vivo study.

INTRODUCTION: The aim of this study was to assess the effects of 3 luting agents (glass ionomer cement, compomer, and polycarboxylate cement) on white spot lesion formation in patients with full-coverage bonded acrylic splint expanders. White spot lesion formation was assessed with quantitative light-induced fluorescence. METHODS: Full-coverage rapid maxillary expanders were cemented with glass ionomer cement, compomer, and polycarboxylate cement in groups 1, 2, and 3, respectively. A control group comprised patients who never had orthodontic treatment. Quantitative light-induced fluorescence images taken before and after rapid maxillary expansion treatment were analyzed for these parameters: the percentages of fluorescence loss with respect to the fluorescence of sound tooth tissue (ΔF) and maximum loss of fluorescence intensity in the whole lesion; lesion area with ΔF equal to less than a -5% threshold; and the percentage of fluorescence loss with respect to the fluorescence of sound tissue times the area that indicated lesion volume. RESULTS: All 3 groups showed statistically significantly greater demineralization than the control group. The 3 experimental groups differed from each other in half of the parameters calculated. Teeth in the polycarboxylate group developed the most white spot lesions. CONCLUSIONS: With the highest rate of white spot lesion formation, polycarboxylate cements should not be used for full-coverage bonded acrylic splint expanders. Compomers may be preferred over glass ionomer cements, based on the findings of this study.

A comparative evaluation of microleakage and compressive strength of Ketac Molar, Giomer, Zirconomer, and Ceram-x: An in vitro study.

BACKGROUND: Microleakage around dental restorative material and strength to withstand the masticatory forces is major problem in dentistry. Instead, many new materials available, very few actually bond to tooth surface and bear masticatory load. AIM: The aim of this study is to evaluate and compare the microleakage and compressive strength of Ketac Molar, Giomer, Zirconomer, and Ceram-x. MATERIALS AND METHODS: For the evaluation of microleakage, Class V cavities were prepared on sixty human premolar teeth and divided into four study groups (n = 15): Group I (Ketac Molar), Group II (Giomer), Group III (Zirconomer), and Group IV (Ceram-x). The samples were thermocycled and subjected to dye penetration test. The sections were made and evaluated under stereomicroscope at × 40 magnification. For the compressive strength evaluation, sixty cylindrical specimens were fabricated measuring 5 mm × 6 mm and grouped into four study groups (n = 15): Group I (Ketac Molar), Group II (Giomer), Group III (Zirconomer), and Group IV (Ceram-x). All were then subjected to the Universal Testing Machine at crosshead speed of 1 mm/s. STATISTICAL ANALYSIS USED: The data were analyzed using paired t-test and ANOVA. RESULTS: The microleakage was found insignificant (P > 0.05) for all study groups, with Giomer showing maximum followed by Zirconomer, Ceram-x, and Ketac Molar. The compressive strength was found to be highly significant (P < 0.01) with the maximum score for Giomer followed by Ceram-x, Zirconomer, and Ketac Molar. CONCLUSION: The sealing ability was maximum in Ketac Molar, Zirconomer, Ceram-x, and Giomer whereas the compressive strength was maximum for Giomer followed by Ceram-x, Zirconomer, and Ketac Molar.

Lack of Buffering by Composites Promotes Shift to More Cariogenic Bacteria.

Secondary caries (SC) remains a very important problem with composite restorations. The objectives of this study were to test the acid-buffering ability of several restorative materials and to evaluate whether buffering of the restorative material has an impact on the microbial composition of the biofilm. Disk-shaped specimens of conventional composite, composite with surface prereacted glass-ionomer filler particles (so-called giomer), glass-ionomer cement (GIC), amalgam, and hydroxyapatite (HAp) (control) were exposed to aqueous solutions with pH 4, 5, 6, and 7 and to the medium containing bacteria-produced acids, and pH changes were recorded over several days. Next, material specimens were immersed in bacterial growth medium with pH adjusted to 5. After a 24-h incubation, the extracts were collected and inoculated with a cariogenic (Streptococcus mutans) and a noncariogenic (Streptococcus sanguinis) species. The bacterial growth was monitored both in a single-species model by spectrophotometry and in a dual-species model by viability quantitative polymerase chain reaction. Amalgam and HAp showed the strongest acid-buffering ability, followed by the GIC and the giomer, while the conventional composite did not exhibit any buffering capacity. Furthermore, due to the lack of acid-buffering abilities, composite was not able to increase the pH of the medium (pH 5), which, in the absence of antibacterial properties, allowed the growth of S. mutans, while the growth of S. sanguinis, a less aciduric species, was completely inhibited. A similar effect was observed when bacteria were cultured together: there was a higher percentage of S. mutans and lower percentage of S. sanguinis with the conventional composite than with other materials and HAp. In conclusion, conventional composites lack the ability to increase the local pH, which leads to the outgrowth of more acidogenic/aciduric bacteria and higher cariogenicity of the biofilm. Together with lack of antibacterial properties, lack of buffering may account for the higher susceptibility of composites to SC.

Clinical performance during 48 months of two current glass ionomer restorative systems with coatings: a randomized clinical trial in the field.

BACKGROUND: This study was carried out as a prospective clinical field study with the aim of evaluating the clinical performance of Equia Fil® with a nanofilled resin coating and the conventional Fuji IX GP® fast with an LC coating according to the World Dental Federation (FDI) restoration material evaluation criteria. METHODS: The clinical performance of Equia Fil® and Fuji IX GP® fast was evaluated on permanent posterior teeth of 643 adult patients aged between 20 to 80 years old in randomly selected clinics across Germany. Occlusal cavities in posterior permanent teeth were restored with Equia Fil® with a nanofilled, light-cured resin coating (n = 515) and Fuji IX GP® fast with an LC coating (n = 486). Direct clinical assessment as well as photographic assessment and assessment of stone casts of the restorations were made at 1 year, 2 years, 3 years, and 4 years. RESULTS: In 4 years, a total of 1001 fillings from both materials were placed by 111 dentists in 643 patients. Random slope models showed that the Equia filling system had overall lower odds of obtaining a delta event (material needs replacement) in comparison to Fuji IX GP® fast with an LC coating within all models. In both materials, filling size/surface was the most important component affecting the clinical performance of the materials. When measuring the odds of obtaining a delta event (material needs replacement), the odds ratios jumped to approximately 43 and 296 times for class II (two surfaces) and class II mesial-occlusal-distal (three surfaces) respectively in comparison to class I fillings. CONCLUSION: Both materials showed similar good overall performance in class I cavities; however, when including numbers from both class I and II fillings, the Equia system with a nanofilled resin coating showed better overall performance with fewer failures in all the follow-up intervals. Nonetheless, the percentage of unsatisfactory to poor fillings according to the FDI criteria was relatively high in two-surface class II fillings and higher in three-surface class II fillings for both materials. TRIAL REGISTRATION: Deutsches Register Klinischer Studien (German Clinical Trials Register): DRKS00004220. ( www.germanctr.de ). Registration date: 6 Sept 2012.

Influência da densidade tubular em diferentes profundidades dentinárias na estabilidade de união de cimentos de iônomero de vidro / Influence of tubular density in diferent dentin depths in bonding stability of glass ionomer cements

O objetivo do estudo foi avaliar a influência da densidade tubular em diferentes profundidades dentinárias na estabilidade de união de dois cimentos de ionômero de vidro (CIV) de alta viscosidade. Vinte terceiros molares foram alocados em 6 grupos experimentais, de acordo com a profundidade da dentina - proximal, oclusal superficial ou oclusal profunda, e os CIVs - Fuji IX (GC Corp.) e Ketac(TM) Molar Easy Mix (3M/ESPE). Inicialmente os dentes foram cortados a fim de se obter fatias de aproximadamente 1 mm de espessura de dentina proximal, oclusal superficial e profunda. Em seguida, foi realizado uma análise topográfica das secções das diferentes superfícies e profundidades em microscopia confocal a laser (100X) para obtenção das médias da densidade tubular em cada profundidade. Cânulas de polietileno foram então posicionadas sobre as secções de dentina pré-tratadas e preenchidas pelos CIVs. Os espécimes foram armazenados em água destilada por 24 h e 12 meses a 37°C, em seguida foram submetidos ao ensaio de microcisalhamento (0,5 mm/min). Após o ensaio, foi realizada a análise do padrão de fratura em estereomicroscópio (400X). Os dados obtidos foram submetidos à Análise de Variância para dados repetidos, seguido do teste de Tukey (?=5%). Verificamos que a densidade dos túbulos dentinários, em diferentes profundidades de molares permanentes, é inversamente proporcional a resistência de união de cimentos de ionômero de vidro de alta viscosidade. Foi ainda observado em todos os grupos que a resistência de união após 24 horas é maior do que em 12 meses, indicando degradação da interface adesiva ao longo do tempo.

The aim of this study was to evaluate the influence of dentin tubule density of different depths in the bond stability of two high viscous glass ionomer cements (GIC). Twenty (third) molars were assigned into 6 experimental groups, according to the depth of dentin - proximal, superficial or deep occlusal occlusal and the GICs - Fuji IX (GC Corp.) and Ketac (TM) Molar Easy Mix (3M / ESPE). Initially, the teeth were cut to obtain slices approximately 1 mm thick for approximal, superficial and deep occlusal surfaces. Then it was performed a topographical analysis of sections of different depths surfaces and laser confocal microscopy (100X) to obtain averages of the tubular density at each depth. Polyethylene cannulae were then positioned on the pre-treated dentin sections and filled with GIC. The specimens were stored in distilled water for 24 h and 12 months at 37°C were then subjected to microshear bonding test (0.5 mm / min). After the test, a fracture analysis pattern was performed in stereomicroscope (400X). The data were submitted to ANOVA for repeated measures followed by the Tukey test (? = 5%). We found that the density of dentinal tubules at different depths of permanent molars, is inversely proportional to the bond strength of high viscosity glass ionomer cements. It was observed in all groups which bond strength after 24 hours is higher than in 12 months, indicating degradation of the interface over time.

Influência da aceleração de presa por meio de ultrassom, luz halógena e diodo emissor de luz nas propriedades e resistência de união à dentina de cimentos de iônomero de vidro / Influence of accelaration setting reaction by ultrasound, halogen light and light emitted diode on properties and bond strength of glass ionomer cement

Este estudo avaliou a influência da aceleração de presa de cimentos de ionômero de vidro de alta viscosidade (CIVAV) por meio de ultrassom, luz halógena e diodo emissor de luz (LED). Para as análises, os espécimes foram divididos em nove grupos de acordo com o material - CIVAV versão pó-líquido (Fuji Gold Label IX GPGC Corp.), CIVAV versão encapsulado (Equia Fill - GC Corp.) e a aceleração de presa inicial - controle negativo; aplicação de ultrassom por 20s, irradiados com luz halógena por 60s, irradiados com LED por 60s, além de um grupo controle positivo de cimento de ionômero de vidro modificado por resina (CIVMR) versão pó-líquido (Fuji II LC - GC Corp.). Para o teste de resistência flexural (RF) foram preparados 90 espécimes (25x2x2mm) (n=10), após armazenamento em água destilada por 24h a 37°C, os espécimes foram submetidos ao teste de RF de três pontos (1mm/min). Para a análise de rugosidade superficial (RS), 45 espécimes (n=5) previamente preparados para o teste de RF, foram selecionados aleatoriamente em cada grupo. A medida da RS (parâmetros Sa e Ra) do corpo de prova foi dada pela média de 5 leituras realizadas na superfície. Para o teste de resistência de união (RU), 90 molares decíduos (n=10) foram selecionados e cânulas de polietileno foram posicionadas sobre as superfícies planas de dentina pré-tratadas, preenchidas por um dos CIV e aplicado um dos aceleradores de presa de acordo com o grupo experimental. Após armazenamento em água destilada por 24h a 37°C, os espécimes foram submetidos ao teste de microcisalhamento (1,0 mm/min). O padrão de fratura foi analisado em microscópio esteroscópico (400 X). Para avaliar a interação dentina-CIV, foram selecionados 27 caninos decíduos (n=3), foi preparada uma cavidade (4x2x2mm) na superfície vestibular, então a cavidade foi restaurada com um dos

CIV propostos pelo estudo para então ser aplicado um dos aceleradores de presa de acordo com o grupo experimental. Após armazenados por 48h a 37ºC e 100% de umidade relativa, os dentes foram seccionados, resultando em fatias com 1mm de espessura. A fatia obtida foi observada em MEV para avaliar qualitativamente possíveis diferenças estruturais. Os valores dos testes de RF, RS e RU foram submetidos a Análise de Variância e teste de Tukey (?=5%). Como resultados na RF, a reação de presa com ultrassom resultou em maiores valores e semelhantes aos grupos controle negativo, independente da forma de apresentação do CIVAV. Para RS (Ra) o grupo Fuji IX mostrou maiores valores quando houve aplicação de ultrassom. Os demais grupos apresentaram resultados semelhantes. Para o parâmetro Sa houve diferença estatística em relação a apresentação do material e Equia Fill apresentou maiores valores de Sa. Para o teste de RU Fuji IX apresentou melhor desempenho nos grupos que receberam ativação por ultrassom e LED. Equia Fill não foi influenciado por nenhum tipo de fonte externa na RU. Com relação ao padrão de fratura, as fraturas adesivas/mistas apresentaram maior frequência independente do grupo experimental. As imagens de MEV mostram a região de interação do material com a dentina. Concluímos que o uso do ultrassom influenciou positivamente na RF, porém gerou maiores valores de RS (Ra) no grupo Fuji IX. Equia Fill tem maiores valores de RS (Sa). LED e ultrassom influenciaram positivamente o grupo Fuji IX na RU.

This study evaluated the influence of acceleration setting reaction by ultrasound, halogen light and light emitting diode (LED). For the analysis, the specimens were divided into nine groups according to the material - HVGIC powder-liquid version (Fuji Gold Label IX GP- GC Corp.), HVGIC encapsulated version (Equia Fill - GC Corp.) and the acceleration setting reaction original - negative control; ultrasound application for 20 seconds, irradiated with halogen light for 60 seconds, irradiated with LED for 60 seconds, and a positive control group of resin modified glass ionomer cement (RMGIC) powder-liquid version (Fuji II LC - GC Corp.) . For flexural strength test (FS) there were prepared 90 specimens (25x2x2mm) (n=10). After storage in water for 24 hours at 37°C, specimens were subjected to the FS test three points (1min/min). For the surface roughness analysis (SR), 45 specimens (n=5) previously prepared to the FS test were randomly selected from each group, and the average of 5 readings was analysed in Sa and Ra parameters. For the bond strength test (BS) 90 primary molars (n = 10) were selected and polyethylene cannulae were positioned on the flat pretreated dentin surface filled by one of the GICs and apply one of the setting reaction accelerators according to the experimental group. After storage in distilled water for 24 hours at 37°C, specimens were subjected to microshear test (1.0 mm/min). The fracture pattern was analyzed in stereomicroscope (400X). To evaluate the interaction dentin-GIC were selected 27 deciduous canines (n= 3), a cavity (4x2x2mm) was prepared in the buccal surface and then restored with the GIC accordingly to groups. After stored for 48 hours at 37°C and 100% relative humidity, the teeth were sectioned, resulting in slices with 1mm thickness. The slice obtained was observed by scanning electron microscope

(SEM) to assess qualitatively possible structural differences. The values of FS testing, SR and BS were submitted to ANOVA and Tukey's test (? = 5%). As a result the FS, the ultrasound with setting reaction resulted in higher values and similar to the negative control group, regardless of the format of the HVGIC. SR for Ra parameter Fuji IX group showed higher values when there was application of ultrasound. The other groups showed similar results. For Sa parameter was no statistical difference regarding the presentation of material and Equia Fill showed higher Sa. For the BS Fuji IX test performed better in the groups receiving.

Effect of beverages on color and translucency of new tooth-colored restoratives.

This investigation examined the susceptibility to staining and translucency changes of some new tooth-colored restorative materials after immersion in different beverages. The materials studied were 3M Filtek Z350XT (ZT), 3M Filtek 350XT Flowable Restorative (ZF), Shofu Beautifil Flow Plus (BF), Shofu Beautifil II (B2), 3M Ketac Nano (N100), and 3M Photac Fil (PF). Following the manufacturers' instructions, 42 samples were made from each material and placed in an incubator at 100% humidity and 37°Celsius for 24 hours. Baseline L*, a*, b* readings were taken against white and black backgrounds using a photospectrometer. The samples were then randomly assigned to be immersed in seven beverages, namely cola drink, orange juice, red wine, vodka, black coffee, green tea, and distilled water for a period of seven days. Color readings were taken again by recording the L*, a*, b* values. Data was analyzed using t-tests, one-way analysis of variance with Tukey post hoc and Pearson's correlation (p<0.05). BF generally performed as well as the conventional composite resin materials (ZT and ZF) but N100 and B2 did not. PF had the largest staining and translucency changes. Coffee, red wine, and tea resulted in the most staining and negative translucency changes. An inverse correlation between ΔE and ΔTP was observed for all materials and beverages with the exception of orange juice.

Microleakage of 4 post-luting cements evaluated by the computerized fluid filtration method.

PURPOSE: The aim of this study was to evaluate the microleakage of 4 fiber post-luting systems using the computerized fluid filtration method. METHODS: 60 extracted human mandibular permanent premolar teeth were used for the study. The teeth were instrumented with Hedstroem files up to size 60, post spaces were prepared and then Unicore fiber posts were cemented using 4 luting systems. Group1: Duolink, Group 2: Resinomer, Group 3: Fuji Plus, Group 4: Multilink Sprint, Group 5: Positive Control, and Group 6: Negative Control. The samples were stored in distilled water for 2 weeks and then microleakage was evaluated. Data were analyzed with 1 way-ANOVA and Dunett T3 tests (P<.05). Groups 2 and 3 significantly exhibited higher microleakage values than groups 1 and 4 (P<.05). RESULTS: Resin cements used with total etch-bonding systems demonstrated lower microleakage values than the other cements. CONCLUSIONS: Reduction of steps in dentin conditioning of resin luting cements may have a promoting effect on microleakage.

In vivo biocompatibility versus degree of conversion of resin-reinforced cements in different time periods.

This study focused on test the null hypothesis that there is no difference between the degree of conversion and biocompatibility of different resin reinforced glass ionomer cements (RRGICs). Forty-eight male Wistar rats were used, distributed into four groups (n = 12), as follows: Group C (Control, polyethylene), Group FOB (Fuji Ortho Band), Group UBL (Ultra band Lok), and Group MCG (Multicure Glass), in subcutaneous tissue. The events of edema, necrosis, granulation tissue, multinuclear giant cells, young fibroblasts, and collagen formation were analyzed at 7, 15, and 30 days. The degree of conversion was evaluated by the Fourier method. Biocompatibility and degree of conversion were assessed using the Kruskal-Wallis and Dunn tests, and ANOVA and Tukey's test, respectively (P < 0.05). It was observed that, there was significant difference between Groups FOB and UBL for the presence of young fibroblasts at 15 days (P = 0.034) and between the Control and MCG Groups for the presence of multinucleated giant cells at 30 days (P = 0.009). Monomer conversion increased progressively until day 30, with significant difference between Group FOB and Groups UBL and MCG (P = 0.013) at 15 days. The null hypothesis was partially accepted, Fuji Ortho Band showed a less monomer conversion and a smaller number of young fibroblasts in the time of 15 days.

Drug-eluting cements for hard tissue repair: a comparative study using vancomycin and RNPA1000 to inhibit growth of Staphylococcus aureus.

Bone cement used in orthopaedic applications can become colonized with bacterial biofilms, resulting in severe medical complications. Consequently, bone cements are often loaded with antibiotics in an effort to prevent bacterial colonization. However, current formulations may not release antibiotics into the environment at sufficient and sustained concentrations required to impede bacterial growth or may be incompatible with antibiotics that are effective against the colonizing organism. Thus, new cement formulation options are needed. This report describes the performance of a novel SiO2-TiO2-ZnO-CaO-SrO-based glass polyalkenoate cement as a carrier of antimicrobials active against Staphylococcus aureus, the predominant cause of orthopaedic biofilm-associated infections. The antibiotic vancomycin and a novel Staphylococcus aureus RnpA inhibitor under pre-clinical development, RNPA1000, were included in these studies. Rheological testing characterized the workability of the glass polyalkenoate cement over a range of powder-to-liquid ratios and polyacrylic acid concentrations and revealed that the most suitable powder-to-liquid ratio was 2/1.25 with 40 wt% polyacrylic acid. Loading glass polyalkenoate cement with either 20-30% RNPA1000 or vancomycin prevented bacterial growth. However, longer incubations allowed for Staphylococcus aureus colonies to form near the vancomycin-infused cement, indicating that vancomycin may not be suitable for long-term biofilm inhibition in comparison to RNPA1000. Scanning electron microscopy and energy-dispersive X-ray analyses confirmed successful incorporation RNPA1000 into the cement matrix and were indicative of its slow release. These studies establish a drug-eluting formulation of glass polyalkenoate cement with great potential in orthopaedic implants that incorporates known antibiotics as well as RNPA1000 to prevent growth of the dangerous pathogen Staphylococcus aureus.