Polyetheretherketone split post and core for restoration of multirooted molar with insufficient dental tissue remnants by digital techniques: a case report and 3-year follow up.

BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars. CLINICAL CONSIDERATIONS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria. CONCLUSION: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.

Evaluation of Er,Cr:YSGG laser technique for fiber post removal of endodontically treated teeth using micro-computed tomography.

Various clinical techniques such as removal kits, ultrasonic tips, burs, and drills, have been used for fiber post removal in endodontically treated teeth. In most clinical cases, the dental practitioners prefer to use ultrasonic tips, despite the heat generation and the formation of microcracks induced in the radicular dentin. The purpose of this study was to investigate the effectiveness of using erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser (2780 nm) as an alternative fiber post removal technique and to compare it to an ultrasonic method using micro-computed tomography (micro-CT). The operating parameters of the X-ray tube were set to 50 kVp and 300 mA. This approach allowed the generation of 2D lateral projections that were then used to reconstruct the 3D volume in DICOM format. Fiber posts were removed from 20 endodontically treated single-rooted premolars (n = 10) using an ultrasonic vibrator with diamond-coated ultrasonic tip (control method), or Er,Cr:YSGG laser irradiation protocol; average power 2.5 W, repetition rate 20 Hz, pulse duration 140 µs, 40% air and 20% water, and close-contact mode. The number of sections with newly formed microcracks, the loss of dentinal tissue, the amount of the residual resin cement, and the removal time were evaluated for both methods. The data were analyzed using paired t-test, Wilcoxon signed-rank and Mann-Whitney U tests at level of significance a = .05. In the laser-treated group the parameters regarding microcracks formation (21 ± 16) and removal time (4.7 ± 1.1 min) were advantageous compared to the ultrasonic-treated group (42 ± 27 and 9.2 ± 1.0 min, respectively), indicating that Er,Cr:YSGG laser could be an alternative fiber post removal technique.

Effect of apical root resection, orthodontic extrusion, and surgical crown lengthening on load capability.

OBJECTIVES: This study aims to investigate the load-to-fracture of procedures changing crown-to-root ratio (RCRR) aimed to restore severely damaged upper central incisors to avoid tooth extraction compared to implant placement. There is no evidence on load capability after apical root resection (AR), orthodontic extrusion (OE), and surgical crown lengthening (SCL) in respect to RCRR, respectively. MATERIAL AND METHODS: Human maxillary central incisors were endodontically treated, decoronated, and divided into 4 groups (n = 48). The following specimen preparation was performed: (I) adhesive core-and-post build-up (control), (II) as (I) and 2 mm apical root resection (AR), (III) before adhesive core-and-post build-up teeth were shortened 2 mm coronally (OE) (IV) as (I), but specimens were embedded 4 mm instead of 2 mm below the CEJ (SCL), group (V) implant-borne restoration with individual all-ceramic abutments (n = 12; ∅4.1/l = 12 mm) (IBR). All specimens received all-ceramic crowns, thermo-mechanical (TML), and subsequent linear loading (LL) until failure. RCRR were calculated and log-rank, Kruskal-Wallis, Mann-Whitney U, ANOVA, and chi-square tests applied (p = 0.05). RESULTS: Fracture loads after subsequent LL differed significantly (p = 0.001) between groups, while implants showed the highest values. Fmax median (min/max) were as follows: (I) 252 (204/542), (II) 293 (243/443), (III) 253 (183/371), (IV) 195 (140/274), and (V) 446 (370/539). Pair-wise comparison showed significant differences (p = 0.001) between group I/IV and group V, I, and IV (p = 0.045), II and IV (p = 0.001), and III compared to IV (p = 0.033), respectively. RCRR below 1 significantly increased load capability compared to RCRR = 1. CONCLUSIONS: OE appears to preferably ensure biomechanical stability of teeth that are endodontically treated and receive core-and-post and crown placement compared to SCL. AR has no adverse biomechanical impact. RCRR < 1 is biomechanically beneficial. CLINICAL RELEVANCE: For endodontically treated and restored teeth, orthodontic extrusion should be preferred compared to surgical crown lengthening prior single-crown restoration. As orthodontic extrusion, apical root resection has no adverse effect on load capability. Single-crown implant-borne restorations are most load capable.

Outcome of intentional replantation of endodontically treated teeth with periapical pathosis: A systematic review and meta-analysis.

The purpose of the present review was to examine success, survival and failure following intentional replantation of endodontically treated teeth with existing periapical pathosis and to determine the factors that might affect the outcome of replantation. Clinical trials, longitudinal studies, case series with >10 cases and at least 1-year follow-up were included. The average rate of success following intentional replantation was 77.23%. Meta-analysis revealed the mean weighted survival to be 85.9% (95% CI: 79.6-91.2) Common complications include inflammatory root resorption (0%-27%) and ankylosis (0%-25%). Variables influencing successful outcome include extra alveolar dry time <15 min; root-end resection (2-3 mm) and cavity preparation (3 mm); manipulation of the tooth using the crown only; and use of an appropriate storage media. The review concludes that intentional replantation is a viable treatment option with acceptable survival rates for endodontically treated teeth with periapical pathosis.

Effect of Biologically Oriented Preparation Technique on the Stress Concentration of Endodontically Treated Upper Central Incisor Restored with Zirconia Crown: 3D-FEA.

The aim of this study was to evaluate the effect of biologically oriented preparation technique on the stress concentration of endodontically treated upper central incisors restored with zirconia crown (yttria-stabilized zirconia polycrystalline ceramic) through finite element analysis (FEA). Four models of maxillary central incisors containing enamel, dentin, periodontal ligament, cortical and medullary bone were created in CAD. Each model received a polymeric core-build up with nanofilled dental resin composite. The evaluated models were SM-preparation in shoulder 90°; CM-chamfer preparation; BOPT-biologically oriented preparation technique and BOPTB-BOPT preparation 1 mm below the cement-enamel junction. All models received zirconia crowns (5Y-TZP), fiberglass post and 1 mm ferrule. The models were imported into the analysis software with parameters for mechanical structural testing using the maximum principal stress and the tensile strength as the analysis criteria. Then, load of 150 N was applied at the cingulum with 45° slope to the long axis of the tooth, with the fixed base for each model. The type of marginal preparation affected the stresses concentration in endodontically treated teeth and in the zirconia crown margin. Considering the stress magnitude only, BOPT is a viable option for anterior monolithic zirconia crowns; however, with the highest stress magnitude at the restoration margin.

Apical fenestration in endodontically treated teeth: A report of two cases.

Root canal therapy in teeth with root fenestrations can present with pain on apical palpation or persistent pain. The signs and symptoms of root fenestration in the absence of mucosal fenestration may be misleading, which may be misdiagnosed as non-odontogenic pain. Although CBCT is superior to periapical radiographs for the diagnosis of root fenestration, it failed to detect the intact cortical plate in the middle third in our cases. Therefore, the type was different in CBCT from its actual size surgically. Repeated non-surgical root canal treatment would not alleviate pain in the presence of root fenestration and may lead to apical root fracture. Root-resection relieves pain, unless the fenestration is accompanied by fracture. The aim of these two case reports was to describe the diagnosis and treatment of endodontically treated teeth with a persistent pain. Also, the difference of root fenestration type between CBCT and its actual size was described.

Success Rate of Contemporary Regenerative Endodontic Therapy and the Expected Outcomes of the Endodontic Microsurgery: A Systematic Review and Meta-Analysis

ABSTRACT Objective: To examine the level of the accumulating success of the modern Resin-Based Endodontic Surgery (RES) and comparison with Endodontic Microsurgery (EMS) and finally offer a replacement at the predicted final results of EMS. Material and Methods: MEDLINE, PubMed, Cochrane Library, Embase, ISI, Google Scholar have been utilized as electronic databases for systematic literature until 2019. Therefore, Endnote X9, which can be provided in the market, has been applied to manage the electronic titles. Searches have been made with keywords "Endodontic Microsurgery OR EMS", "Resin-Based Endodontic Surgery OR RES", "Regenerative Endodontic Therapy", "Root-End Filling", "Root-End Surgery", "Periapical Surgery" and "Endodontics". Thus, this systematic review has been conducted concerningthe basic investigation of the PRISMA Statement-Preferred Reporting Items designed for the Meta-analyses and Systematic Reviews. Results: A total of RES =19 and EMS =31 with potential pertinent abstracts and topics were discovered in manual and electronic searches. Then, three articles for RES and four studies for EMS publications satisfied our inclusion criteria necessary for systematically reviewing the studies. The analysis showed the success rate for EMS as equal to 1.16 times the probability of the success rate for RES. Conclusion: Micro-surgical procedures superiorly achieved the predictable high success rate for the Root-end surgery compared to conventional methods.

The Influence of Post System Design and Material on the Biomechanical Behavior of Teeth with Little Remaining Coronal Structure.

PURPOSE: To evaluate the influence of different post systems on the biomechanical behavior of teeth with a severe loss of remaining coronal structure. MATERIALS AND METHODS: Fifty standardized bovine teeth (n = 10 per group) were restored with: cast post-and-core (CPC), prefabricated metallic post (PFM), parallel glass-fiber post (P-FP), conical glass-fiber post (C-FP), or composite core (no post, CC). The survival rate during thermomechanical challenging (TC), the fracture strength (FS), and failure patterns (FP) were evaluated. Finite element models evaluated the stress distribution after the application of 100 N. RESULTS: All specimens survived TC. Similar FS was observed among post-containing groups. Groups P-FP and CC presented 100% repairable fractures. The von Mises analysis showed the maximum stresses into the root canal in groups restored with metallic posts. Glass-fiber posts and CC presented the maximum stresses at the load contact point. Glass-fiber groups showed lower stresses in the analysis of maximal contact pressure; CPC led to the highest values of contact pressure. The modified von Mises (mvM) stress in dentin did not show differences among groups. Moreover, mvM values did not reach the dentin fracture limit for any group. CONCLUSIONS: The type of intracanal post had a relevant influence on the biomechanical behavior of teeth with little remaining coronal structure.

Preparation Ferrule Design Effect on Endocrown Failure Resistance.

PURPOSE: To evaluate the effect of preparation ferrule inclusion with fracture resistance of mandibular molar endocrowns. MATERIALS AND METHODS: Recently extracted mandibular third molars were randomly divided into 3 groups (n = 12) with the coronal tooth structure removed perpendicular to the root long axis approximately 2 mm above the cemento-enamel junction with a slow-speed diamond saw. The pulp chamber was exposed using a diamond bur in a high-speed handpiece with pulpal remnants removed and canals instrumented using endodontic hand instruments. The chamber floor was restored using a resin core material with a two-step, self-etch adhesive and photopolymerized with a visible light-curing unit to create a 2 mm endocrown preparation pulp chamber extension. One and two millimeter ferrule height groups were prepared using a diamond bur in a high-speed handpiece following CAD/CAM guidelines. Completed preparation surface area was determined using a digital measuring microscope. Scanned preparations were restored with lithium disilicate restorations with a self-adhesive resin luting agent. All manufacturer recommendations were followed. Specimens were stored at 37°C/98% humidity and tested to failure after 24 hours at a 45° angle to the tooth long axis using a universal testing machine. Failure load was converted to MPa using the available bonding surface area with mean data analyzed using Kruskal-Wallis/Dunn (p = 0.05). RESULTS: Calculated failure stress found no difference in failure resistance among the three groups; however, failure load results identified that the endocrown preparations without ferrule had significantly lower fracture load resistance. Failure mode analysis identified that all preparations demonstrated a high number of catastrophic failures. CONCLUSIONS: Under the conditions of this study, ferrule-containing endocrown preparations demonstrated significantly greater failure loads than standard endocrown restorations; however, calculated failure stress based on available surface area for adhesive bonding found no difference between the groups. Lower instances of catastrophic failure were observed with the endocrown preparations containing 1 mm of preparation ferrule design; however, regardless of the presence of ferrule, this study found that all endocrown restorations suffered a high proportion of catastrophic failures but at loads greater than reported under normal masticatory function.

Outcome assessment of apical surgery: A study of 234 teeth.

BACKGROUND/PURPOSE: Apical surgery is an option for management of endodontically-treated tooth with persistent periapical lesions or symptom and sign. The objective of this study was to investigate the correlation between the demography, preoperative, postoperative factors and healed rate of apical surgery. METHODS: Subjects were retrospectively collected from patients who received apical surgery/apicoectomy at the Endodontic Department, National Taiwan University Hospital from January 2013 to June 2015. The standard apical surgery procedures were performed. The demography, preoperative clinical and radiographic examination data as well as postoperative variables were collected. The outcome assessment was carried out after surgery. Statistical analysis was performed by chi square test to evaluate the potential outcome predictors. RESULTS: Total 187 patients and 234 teeth receiving apical surgery were included. 53 male and 134 female patients were collected. The age was ranged between 17 and 89 years old and the mean age was 43.64 years old. Better healed rate with significant differences were observed in female patient (p < 0.05), age ≤60 years old (p < 0.01), preoperative root canal filling material >2 mm short of apex (p < 0.01), lesion size from ≤2 mm to ≤12 mm (p < 0.05) and follow-up period â‰§12 months (p < 0.01) groups. CONCLUSION: Gender, age, preoperative root canal filling material extent, lesion size and follow-up period may affect the outcome of apical surgery. Tooth type, post, prosthesis, and lesion area showed no marked effect on apical healing. These results provide more detailed information for the clinical practitioners to make treatment plans and are important for clinical endodontic practices.

Evaluation of relationship between endodontic access cavity types and secondary mesiobuccal canal detection.

BACKGROUND: The aim of this study was to evaluate the relationship between Endodontic Access Cavity (EAC) types with MB2 canal detection ratio in the upper first molars. METHODS: A total of 60 roots of extracted human maxillary first molars were selected. All teeth were prepared with Point EAC (PEAC), Conservative EAC (CEAC) and Traditional EAC (TEAC) respectively. After each group were completed, extra canal was searched. Preoperative and postoperative tooth weigh was calculated using precise scale. McNemar's chi-square test and a paired test significant difference were used for statistical analyses. RESULTS: The EAC types statistically were changed of tooth tissue loss quantity (p = 0.000). MB2 detection rate of CEAC (%53,3) and TEAC (%60) are higher than statistically that of PEAC (%31.6) (p < 0.05). 8 teeth MB2 canal was detected only with the CBCT images. CONCLUSIONS: In upper molars, CEAC seems reasonable in terms of detected the MB2 canal and removed hard tissue.

Flared Roots Reinforced With Bulk-fill Flowable Composite - Case Report.

This article presents a case report for the treatment of a patient with a flared root. The patient was treated with a bulk-fill flowable composite. This innovative approach seems to be efficient in reinforcing flared roots. The advantages and disadvantages of the technique are presented.

The Effects of Endodontic Access Cavity Preparation Design on the Fracture Strength of Endodontically Treated Teeth: Traditional Versus Conservative Preparation.

INTRODUCTION: The aim of this study was to compare the fracture strengths of mandibular molar teeth prepared using traditional endodontic cavity (TEC) and conservative endodontic cavity (CEC) methods and restored using SDR (Dentsply Caulk, Milford, DE) and EverX Posterior (GC Dental, Tokyo, Japan) base composite materials. METHODS: A hundred mandibular first molar teeth were randomly divided into 5 groups. In group 1 (the control group), samples were kept intact. In group 2, TECs were prepared, and the samples were restored with EverX Posterior and composite resin. In group 3, CECs were prepared, and the samples were restored with EverX Posterior and composite resin. In group 4, TECs were prepared, and the samples were restored with SDR and composite resin. In group 5, CECs were prepared, and the samples were restored with SDR and composite resin. This load was applied on the samples at 1-mm/min speed using a 6-mm round-head tip until fracture. The forces resulting in fracture were recorded in newton units. The data were analyzed using Kruskal-Wallis and Pearson correlation tests at a 5% significance level. RESULTS: The fracture strengths of the samples in the control group were significantly higher than the experimental groups (P < .05). There was no statistically significant difference in the endodontic access cavities prepared used the TEC and CEC methods and restored using the same composite base material (P > .05). CONCLUSIONS: CEC preparation did not increase the fracture strength of teeth with class II cavities compared with TEC preparation. The fracture strength of teeth restored with the SDR bulk-fill composite was higher than that of teeth restored with EverX Posterior.

Regenerative endodontic therapy for managing immature non-vital teeth: a national survey of UK paediatric dental specialists and trainees.

Background Several guidelines have been published advocating the use of regenerative endodontic therapy (RET) in managing non-vital immature permanent teeth. It is unclear, however, how many UK paediatric dental specialists routinely use this technique and their opinion of its outcomes, and barriers to its use.Aim To assess the knowledge, experience and the opinion of UK based paediatric dental specialists/trainees (UKPDS/T) and practitioners working in the capacity of paediatric dental specialists on the use of RET.Design A cross-sectional study using a 22-item questionnaire was developed using the Bristol Online Survey tool and circulated electronically to members of the British Society of Paediatric Dentistry between August and November 2016.Results Ninety-eight UKPDS/T completed the survey. A quarter of respondents (N = 24, 24.5%) reported using RET. Reasons cited for not using RET included lack of: training (N = 48, 45%), materials (N = 28, 26%), evidence (N = 17, 16%) and suitable cases (N = 6, 6%). Different protocols in terms of disinfection, medicaments, scaffolds, and obturation material were identified.Conclusions This survey highlights a low uptake of RET by current UKPDS and trainees with several barriers identified. Deviations from the current RET guidelines were identified. Recommendations addressing the use of RET in light of the findings of this survey were made.

Prevalence and Reasons for Extraction of Endodontically Treated Teeth in Adult Nigerians.

AIM: Teeth extraction is an important problem in elder patients. Although some of these teeth have been endodontically treated, many of them may be subjected to extraction. The reasons for extraction are important for prevention planning in further patients. The aim of this study was to assess the prevalence and important reasons for extraction of endodontically treated teeth in adult Nigerians. MATERIALS AND METHODS: This study involved a retrospective examination of 2,000 case files in the archives of the University of Nigeria Teaching Hospital. Out of the 2,000 case files, 650 concerned endodontically treated teeth. RESULTS: The prevalence of extractions in the population was 21.5%. This was more often in the mandible (67.9%) than in the maxilla (32.1%). In both jaws, more molars were extracted (57.1%), followed by premolars (27.1%) and anterior teeth (15.7%). Extractions occurred 57.1% of times in females. However, the rate of extraction decreased with age but peaked in the 51-60 year age band. CONCLUSION: The association between age and extraction was proven. Caries, vertical root fracture and endodontic reasons accounted for the commonest cause of extraction in the mandible; while in the maxilla, endodontic reasons and cusp fracture caused extractions most often. CLINICAL SIGNIFICANCE: The reasons for extraction of endodontically treated teeth are different between maxilla and mandible.

Comparing Fracture Resistance and the Time Required for Two Different Fiber Post Removal Systems.

PURPOSE: To compare two fiber post removal techniques in terms of fracture resistance and time required for post removal. MATERIALS AND METHODS: Post space was prepared to a 9-mm depth in each root canal. The roots were randomly divided into three groups of 15 specimens each. D.T. Light-Posts were cemented in all groups. In group 1, fiber posts were removed using the D.T. Light-Post-removal kit; in group 2, Start-X stainless-steel ultrasonic tips were used. In group 3, fiber posts were left without removal (the control group). For all groups, fracture resistance (N) value was measured and recorded using a universal testing machine. Times required for fiber post removal were also recorded for the two study groups. RESULTS: There was no significant difference between the control and removal kit groups for fracture resistance values (p = 0.233). The fracture resistance value of the ultrasonic group was found to be significantly lower than that of the control group (p = 0.001) as well as that of the removal kit group (p = 0.032). The fiber post removal time for the ultrasonic group was significantly longer than that for the removal kit group (p < 0.001). CONCLUSION: Compared to the removal kit, removal of the fiber posts with an ultrasonic tip decreases the fracture resistance of the roots, although significantly more time is required.

Dentin-like versus Rigid Endodontic Post: 11-year Randomized Controlled Pilot Trial on No-wall to 2-wall Defects.

INTRODUCTION: This is the first long-term randomized controlled trial to evaluate dentin-like glass fiber posts (GFPs) compared with rather rigid titanium posts (TPs) for post-endodontic restoration of severely damaged endodontically treated teeth with 2 or fewer remaining cavity walls. METHODS: Ninety-one subjects in need of post-endodontic restorations were randomly assigned to receive either a tapered GFP (n = 45) or TP (n = 46). Posts were adhesively luted by using self-adhesive resin cement, followed by composite core build-up and preparation of 2-mm ferrule design. Primary end point was loss of restoration for any reason. Kaplan-Meier curves were constructed, and log-rank test was calculated (P < .05). RESULTS: After a follow-up of 132 months, 17 GFP and 20 TP restorations survived, and 19 failed (12 GFP, 7 TP). Failure modes for GFP were root fracture (n = 4), core fracture (n = 1), secondary caries (n = 1), endodontic failure (n = 2), extraction because of tooth mobility grade III associated with insufficient design of removable partial denture (n = 1), tooth fracture (n = 1), and changes in treatment plan (n = 2); failure modes for TP were endodontic failure (n = 5), root fracture (n = 1), and 1 extraction for other reasons. Cumulative survival probability was 58.7% for GFP and 74.2% for TP. CONCLUSIONS: When using self-adhesively luted prefabricated posts, resin composite core build-up, and 2-mm ferrule to reconstruct severely damaged endodontically treated teeth, tooth survival is not influenced by post rigidity. Survival decreased rapidly after 8 years of observation in both groups.

Post-and-Core Restoration of Severely Damaged Permanent Posterior Teeth in Young Adolescents.

PURPOSE: This retrospective study evaluated the survival rates of postendodontic severely decayed posterior permanent teeth in young adolescents. MATERIALS AND METHODS: A total of 48 teeth (patient age range: 8.8-16.9 years) restored with a Kurer post- and core-system (Anchor System, Kurer K4) were assessed. Follow-up appointments 1 to 6 years posttreatment included radiographs and a clinical examination. RESULTS: A total of 5 teeth (10.4%) were extracted, and 13 restorations (27%) required repair. Average restoration-to-failure time was 27 months (SD 12.2 months). CONCLUSION: In view of these findings, clinicians should consider post-and-core restorations an alternative to extractions of endodontically treated severely damaged teeth in adolescents.

Effect of Endocrown Pulp Chamber Extension Depth on Molar Fracture Resistance.

PURPOSE: The purpose of this study was to evaluate the effect of endocrown pulp chamber extension on mandibular molar fracture resistance. METHODS AND MATERIALS: A total of 36 recently extracted mandibular third molars of approximate equal size were sectioned at the facial lingual height of contour followed by endodontic access into the pulp chamber. The specimens were then randomly divided into three groups (n=12) and pulpal and root canal contents removed. Pulp chamber floors were established at 2, 3, and 4 mm from the occlusal table using a three-step etch-and-rinse adhesive and a flowable resin composite. The prepared specimens were then embedded in auto-polymerizing denture base resin with surface area available for adhesive bonding determined using a digital recording microscope. Specimens were restored using a standardized template with a chairside computer-aided design/computer-aided manufacturing unit with the endocrown milled from a lithium disilicate glass-ceramic material. Restoration parameters of occlusal table anatomy and thickness were standardized with the only parameter difference being the pulp chamber extension depth. The endocrown restorations were luted with a self-adhesive resin luting agent and tested to failure after 24 hours on a universal testing machine, with force applied to the facial cusps at a 45° angle to the long axis of the tooth. The failure load was converted into stress for each specimen using the available surface area for bonding. Mean failure load and stress among the three groups was first subjected to the Shapiro-Wilk and Bartlett tests and then analyzed with an analysis of variance with the Tukey post hoc test at a 95% confidence level (p=0.05). RESULTS: The 2- and 4-mm chamber extension groups demonstrated the highest fracture resistance stress, with the 3-mm group similar to the 2-mm group. The 3- and 4-mm chamber extension group specimens demonstrated nearly universal catastrophic tooth fracture, whereas half the 2-mm chamber extension group displayed nonrestorable root fractures. CONCLUSIONS: Under the conditions of this study, mandibular molars restored with the endocrown technique with 2- and 4-mm pulp chamber extensions displayed greater tooth fracture resistance force as well as stress. All groups demonstrated a high number of catastrophic fractures, but these results may not be clinically significant because the fracture force results are higher than normal reported values of masticatory function.