Assessment of internal exposure risk from metals pollution of occupational and non-occupational populations around a non-ferrous metal smelting plant.

Non-ferrous metal smelting poses significant risks to public health. Specifically, the copper smelting process releases arsenic, a semi-volatile metalloid, which poses an emerging exposure risk to both workers and nearby residents. To comprehensively understand the internal exposure risks of metal(loid)s from copper smelting, we explored eighteen metal(loid)s and arsenic metabolites in the urine of both occupational and non-occupational populations using inductively coupled plasma mass spectrometry with high-performance liquid chromatography and compared their health risks. Results showed that zinc and copper (485.38 and 14.00 µg/L), and arsenic, lead, cadmium, vanadium, tin and antimony (46.80, 6.82, 2.17, 0.40, 0.44 and 0.23 µg/L, respectively) in workers (n=179) were significantly higher compared to controls (n=168), while Zinc, tin and antimony (412.10, 0.51 and 0.15 µg/L, respectively) of residents were significantly higher than controls. Additionally, workers had a higher monomethyl arsenic percentage (MMA%), showing lower arsenic methylation capacity. Source appointment analysis identified arsenic, lead, cadmium, antimony, tin and thallium as co-exposure metal(loid)s from copper smelting, positively relating to the age of workers. The hazard index (HI) of workers exceeded 1.0, while residents and control were approximately at 1.0. Besides, all three populations had accumulated cancer risks exceeding 1.0 × 10-4, and arsenite (AsIII) was the main contributor to the variation of workers and residents. Furthermore, residents living closer to the smelting plant had higher health risks. This study reveals arsenic exposure metabolites and multiple metals as emerging contaminants for copper smelting exposure populations, providing valuable insights for pollution control in non-ferrous metal smelting.

Renal excretion of 1,2-dihydroxynaphthalene (DHN) in firefighting instructors after exposure to polycyclic aromatic hydrocarbons (PAHs) during live fire training.

Exposure of firefighting instructors to polycyclic aromatic hydrocarbons (PAHs) such as naphthalene is unavoidable during live fire training. The study aimed to investigate naphthalene uptake by measuring the urinary excretion of the naphthalene metabolite 1,2-dihydroxynaphthalene (DHN), to describe the DHN elimination kinetics and to evaluate the results by comparison to further biomarkers of PAH exposure. N = 6 male non-smoking firefighting instructors completed five training sessions each in a residential fire simulation unit under respiratory protection. All participants provided two urine samples before and another seven samples within an 18-h-interval after each session. DHN was detected by gas chromatography/tandem mass spectrometry (GC-MS/MS) in all samples (n = 237) with median concentrations ranging from 3.3 µg/g crea. (range 0.9-10.2) before exposure to 134.2 µg/g crea. (43.4-380.4) post exposure. Maximum elimination found 3.3 h (median) after onset of exposure decreased with a mean half-life of 6.6 h to 27.1 µg/g crea. (15.7-139.5) 18 h after training. DHN sensitively indicated a presumed dermal naphthalene intake during training, showing similar elimination kinetics like other naphthalene metabolites. Internal exposure of the participants transiently exceeded exposures determined for non-smokers in the general population, but was lower than at other workplaces with PAH exposure. Despite limited uptake, accumulation is possible with daily exposure.

Effect of occupational exposure to vat-textile dyes on follicular and luteal hormones in female dye workers in Abeokuta, Nigeria.

Background: Some synthetic dyes used mainly in textile industries have been associated with endocrine disruption, resulting in infertility, among other disorders. It is unknown if occupational exposure to Vat textile dyes among premenopausal dyers alters hormonal levels. Objectives: We aimed at determining the probable effects of occupational exposure to Vat dyes on reproductive hormones of female textile dyers in the follicular and luteal phases while relating this to age categories and duration of exposure. Methods: Thirty-three premenopausal Vat textile dyers at "Itoku", Abeokuta, Nigeria, among a population of about 80 female dyers were age and sex-matched with 55 non-exposed (control) female participants. Using semi-structured questionnaires, socio-demographic, occupational details and the LMP of participants were obtained. Serum samples were collected in follicular and luteal phases and assayed for female sex hormones using Enzyme Immunoassay. Mann-Whitney U and Z- statistic were used for comparison of the two groups. P-value < 0.05 was considered to be significant. Results: In the follicular phase, the result showed a lower mean FSH ranking (in age category ≤20 years) and higher (p<0.05) Estradiol ranking (in age category 31-40 years) in the exposed than the unexposed. Mean ranks of Progesterone and Estradiol in the luteal phase (age category 31-40 years) were higher (p<0.05) in the exposed, while Estradiol (age category ≥41years) ranked lower (p<0.05). Prolactin demonstrated a significant inverse relationship with the duration of exposure. Conclusion: Occupational exposure to Vat dye among female dyers in Abeokuta is associated with some sex hormone disruption which appears to be age and duration of exposure-related.

[Status of occupational exposure limits of air toxic substances in the GESTIS Substances Database].

Objective: In order to understand the current situation of air toxic substances without occupational exposure limits (OELs) in the workplace in the Germany GESTIS Substance Database, and to provide an effective reference for formulating OELs of corresponding toxic substances and improving health standards. Methods: From March 2022 to May 2023, based on the standard of GBZ 2.1-2019 Occupational Exposure Limits for Hazardous Agents in the Workplace-Part 1: Chemical Hazardous Agents, air toxic substances without OELs in the standard of GBZ/T 300.1-2017 Determination of Toxic Substances in Workplace Air-Part 1: General Principles were screened out, then corresponding OELs in other countrie/regions were queried through the Germany GESTIS Substance Database. Results: Among the 333 kinds (classes) of air toxic substances in 160 parts of GBZ/T 300.1-2017 standard, 48 kinds (classes) of air toxic substances were screened out and had not yet been formulated OELs in GBZ 2.1-2019 standard. By querying the Germany GESTIS Substance Database, it was found that among the 48 kinds (classes) of air toxic substances, 35 kinds (classes) of air toxic substances had both 8-hour occupational exposure limit and short-term occupational exposure limit, 4 kinds (classes) of air toxic substances had 8-hour occupational exposure limit but no short-term occupational exposure limit, 9 kinds (classes) of air toxic substances hadn't been retrieved any OELs. In addition, standard test methods of 7 kinds of air toxic substances hadn't been published in the present, including trimethylchlorosilane, trimethylbenzenes, cumene, chloroethane, chloropropane, dibromoethane and acetophenone. Conclusion: In the process of formulating or revising the standards of GBZ 2.1-2019 and GBZ/T 300, the latest published OELs in the Germany GESTIS Substance Database could be used as a reference basis.

[Establishment of collection methods and laboratory testing methods for active pharmaceutical ingredient in the workplace air].

Objective: To establish collection methods and laboratory testing methods for qualitative and quantitative analysis of 9 typical active pharmaceutical ingredient in the workplace air. Methods: In December 2021, a mixed solution of nine analytes was prepared and then dispersed in aerosol state to simulate sampling. Glass fiber filter membrane was selected as air collector and collected active pharmaceutical ingredient in the air at a rate of 2.0 L/min for 15 minutes. Then, the obtained filter membrane samples were eluted with 25%ACN/75%MeOH. Finally, the eluent was qualitatively and quantitatively analyzed with liquid chromatography-triple quadrupole mass spectrometer. Results: This method could effectively collect active pharmaceutical ingredient in the air, with an average sampling efficiency of more than 98.5%. The linear correlation coefficient r was greater than 0.9990. The lower limit of quantification for each analyte ranged from 0.6~500.0 ng/ml, and the average recovery rate ranged from 97.6%~102.5%. Conclusion: This method could simultaneously collect 9 active pharmaceutical ingredient in the workplace air, and could provide accurate qualitative and quantitative analysis in subsequent laboratory tests.

Monitoring of surgical staff x-ray exposure in the operating room with DosiBadge.

Surgical procedures involving the use of x-rays in the operating room (OR) have increased in recent years, thereby increasing the exposure of OR staff to ionizing radiation. An individual dosimeter makes it possible to record the radiation exposure to which these personnel are exposed, but there is a lack of compliance in the wearing of these dosimeters for several practical reasons. This makes the dose results obtained unreliable. To try to improve the rate of dosimeter wearing in the OR, the Dosibadge project studied the association of the individual dosimeter with the hospital access badge, forming the Dosibadge. Through a study performed at the Tours University Hospital in eight different ORs for two consecutive periods of 3 months. The results show a significant increase in the systematic use of the dosimeter thanks to the Dosibadge, which improves the reliability of the doses obtained on the dosimeters and the monitoring of personnel. The increase is especially marked with clinicians. Following these results and the very positive feedback to this first single-centre study, we are then planning a second multicentre study to validate our proof of concept on different sites, with the three brands of individual dosimeters used in France i.e. dosimeters supplied by Dosilab; Landauer and IRSN.

Similar experimental study on diffusion and distribution of diesel exhaust in confined space of a coal mine.

In the confined space of the underground coal mine, which is dominated by transportation lanes, explosion-proof diesel-powered trackless rubber-wheeled vehicles are becoming the main transportation equipment, and the exhaust gas produced by them is hazardous to the health of workers and pollutes the underground environment. In this experiment, a similar test platform is built to study the effects of wind speed, vehicle speed, and different wind directions on the diffusion characteristics of exhaust gas. In this paper, CO and SO2 are mainly studied. The results show that the diffusion of CO and SO2 gas is similar and the maximum SO2 concentration only accounts for 11.4% of the CO concentration. Exhaust gas is better diluted by increasing the wind speed and vehicle speed, respectively. Downwind is affected by the reverse wind flow and diffuses to the driver's position, which is easy to cause occupational diseases. When the wind is a headwind, the exhaust gases spread upwards and make a circumvention movement, gathering at the top. When the wind speed and vehicle speed are both 0.6 m/s, the CO concentration corresponds to the change trend of the Lorentz function when the wind is downwind and the CO concentration corresponds to the change trend of the BiDoseResp function when the wind is headwind. The study of exhaust gas diffusion characteristics is of great significance for the subsequent purification of the air in the restricted mine space and the protection of the workers' occupational health.

Efficacy of radiation attenuating caps in reducing radiation doses received at the cerebral level in interventional physicians: a systematic review.

Background.Anecdotal reports are appearing in the scientific literature about cases of brain tumors in interventional physicians who are exposed to ionizing radiation. In response to this alarm, several designs of leaded caps have been made commercially available. However, the results reported on their efficacy are discordant.Objective.To synthesize, by means of a systematic review of the literature, the capacity of decreasing radiation levels conferred by radiation attenuating devices (RADs) at the cerebral level of interventional physicians.Methodology.A systematic review was performed including the following databases: MEDLINE, SCOPUS, EBSCO, Science Direct, Cochrane Controlled Trials Register (CENTRAL), WOS, WHO International Clinical Trials Register, Scielo and Google Scholar, considering original studies that evaluated the efficacy of RAD in experimental or clinical contexts from January 1990 to May 2023. Data selection and extraction were performed in triplicate, with a fourth author resolving discrepancies.Results.Twenty articles were included in the review from a total of 373 studies initially selected from the databases. From these, twelve studies were performed under clinical conditions encompassing 3801 fluoroscopically guided procedures, ten studies were performed under experimental conditions with phantoms, with a total of 88 procedures, four studies were performed using numerical calculations with a total of 63 procedures. The attenuation and effectiveness of provided by the caps analyzed in the present review varying from 12.3% to 99.9%, and 4.9% to 91% respectively.Conclusion.RAD were found to potentially provide radiation protection, but a high heterogeneity in the shielding afforded was found. This indicates the need for local assessment of cap efficiency according to the practice.

Assessment and mitigation of radiation hazard for individuals engaged in reconnaissance survey in uranium exploration in Jharkhand, India.

The present study attempts to obtain an a priori estimate of the absorbed dose received by an individual engaged in the reconnaissance survey in Uranium exploration using a predictive mathematical regression analysis. Other radiation safety parameters such as excess lifetime cancer risk are also calculated. Study reflects that the proper handling of naturally occurring radioactive materials accounts for an absorbed dose significantly less than the prescribed limit.

Role of independent research at AERB for ensuring safety of nuclear facilities in India.

The mission of Atomic Energy Regulatory Board (AERB) of India is to ensure that the use of ionising radiation and nuclear energy in India does not cause unacceptable impact on the workers, members of the public and to the environment. AERB has the mandate to carry out detailed safety review for the siting, construction, commissioning, operation and decommissioning of nuclear and radiation facilities established within the country. To deliver and maintain a strong, credible and technically sound regulation, AERB has established the Safety Research Institute (SRI) at Kalpakkam with a robust technical infrastructure and wide knowledge base. This paper highlights the independent safety research activities carried out at SRI and its role to support and facilitate the decision-making process by AERB at various stages of regulatory review for ensuring safety of the nuclear facilities in India.

Evaluation of environmental antibiotic contamination by surface wipe sampling in a large care centre.

OBJECTIVES: Exposure of healthcare workers to antibiotics may cause adverse health effects. Results of environmental contamination with antibiotics, obtained by taking surface wipe samples, can be used as an indicator for potential exposure to these sensitizing drugs. The objective was to describe the results of repeated measurements of contamination with antibiotics on multiple surfaces in hospital wards. Standardized needle and syringe preparation techniques and cleaning procedures were used. METHODS: The preparation table and the floor around the waste bin in six wards were sampled and analysed for contamination with the antibiotics amoxicillin, benzylpenicillin, cefotaxime, ceftriaxone, flucloxacillin, meropenem, piperacillin and vancomycin. Sampling was performed in four trials during 8 months. Depending on the outcome of the trials, the cleaning procedure was adapted. Liquid chromatography with tandem mass spectrometry was used for the analysis of the drugs. RESULTS: During the four trials, contamination with all eight antibiotics was omnipresent on all preparation tables and floors in the six wards. The highest contamination was found for amoxicillin (1291 ng/cm2). Changing the cleaning procedure did not reduce the level of contamination. CONCLUSIONS: Surface contamination with the antibiotics was widespread and most probably caused by spillage during the preparation in combination with an ineffective cleaning procedure. Strategies should be developed and implemented by institutions for safe handling of antibiotics to reduce environmental contamination and potential exposure of healthcare workers to these sensitizing drugs.

Benzene Exposure in Workers From a Waste Oil Regeneration Plant During Ordinary Activities by Air and Biological Monitoring.

BACKGROUND: In the regeneration of waste oil, a strategical technological process for the European Union circular economy action plan, exhausted oils are regenerated to produce high performing oil bases. Aim of this work was to assess the exposure to benzene in plant workers during ordinary activities. METHODS: 59 workers, potentially exposed to benzene, and 9 administrative workers from an Italian plant were monitored for the whole work shift with personal air samplers; urinary benzene (BEN-U) and S-phenyl mercapturic acid (SPMA) were measured by mass spectrometry methods in end-shift urine samples. Different job tasks were identified among workers. RESULTS: Median (minimum-maximum) airborne exposures to benzene were <0.9 (<0.9-6.3) and <0.9 (<0.9-0.9) µg/m3, BEN-U and SPMA levels were 0.094 (<0.015-3.095) µg/L and 0.15 (<0.10-9.67) µg/g crt and 0.086 (0.034-0.712) µg/L and <0.10 (<0.10-3.19) µg/g creatinine in workers and administrative workers, respectively. No differences were found among job tasks and between workers and administrative workers, while higher levels were found in smokers than in non-smokers. For all job tasks, the exposure to benzene was always below occupational limit values. CONCLUSIONS: This study has investigated for the first time the exposure to benzene of workers employed in the re-refining of exhaust oil. The results showed that normal production activities in regenerating used oils do not pose a risk of exposure to benzene in workers.

Source Apportionment of Particulate Matter in a Metal Workshop.

Metal workshops are workplaces with the substantial production of particulate matter (PM) with high metal content, which poses a significant health risk to workers. The PM produced by different metal processing techniques differs considerably in its elemental composition and size distribution and therefore poses different health risks. In some previous studies, the pollution sources were isolated under controlled conditions, while, in this study, we present a valuable alternative to characterize the pollution sources that can be applied to real working environments. Fine PM was sampled in five units (partially specializing in different techniques) of the same workshop. A total of 53 samples were collected with a temporal resolution of 30 min and 1 h. The mass concentrations were determined gravimetrically, and the elemental analysis, in which the concentrations of 14 elements were determined, was carried out using the X-ray fluorescence technique. Five sources of pollution were identified: background, steel grinding, metal active gas welding, tungsten inert gas welding, and machining. The sources were identified by positive matrix factorization, a statistical method for source apportionment. The identified sources corresponded well with the work activities in the workshop and with the actual sources described in previous studies. It is shown that positive matrix factorization can be a valuable tool for the identification and characterization of indoor sources.

Evaluation of uncertainty in personal dose measured using CaSO4:Dy-based TLD badge at different workplaces.

The metrological quality of a measurement is characterised by evaluating the uncertainty in the measurement. In this paper, uncertainty in personal dose measured using individual monitoring CaSO4:Dy-based thermoluminescence dosimeter badge is evaluated by application of the guide to the expression of uncertainty in measurement method. The present dose reporting quantity, whole body dose (WBD) and the proposed quantity, personal dose equivalent, Hp(10) has been used as measurands. The influence of various input quantities on the measurement were analyzed through tests that conform to the requirements of the International Electrotechnical Commission IEC 62387. The study found that the expanded uncertainties for WBD and Hp(10) measurements were 63.4% and 41.4%, respectively, corresponding to a 95% coverage probability for workplace fields covering a wide photon energy range (33-1250 keV). However, the uncertainty estimates were quite lower for the type of workplaces that are identified using the dose evaluation algorithm. The input quantities, namely, the response to a mixture of photon beam qualities and photon energy and angular dependence contribute the most to the total uncertainty.

Occurrence of organic ultraviolet absorbers in the particle and gas samples from plastic greenhouses: Human inhalation intake risk assessment.

The environmental pollution of organic ultraviolet absorbers (UVAs) has attracted global attention. However, the distribution, sources and risk assessment of UVAs in air from plastic greenhouses are rarely reported. This study was the first to investigate the concentrations of ten UVAs in the air samples from plastic greenhouses. The total concentrations of ten UVAs (∑10UVAs) in the air samples ranged from 5.7 × 103 ng/m3 to 6.3 × 103 ng/m3 (median 5.7 × 103 ng/m3) in greenhouses covered with biodegradable mulch film, 288.2 ng/m3 to 376.4 ng/m3 (median 333.9 ng/m3) in greenhouses covered with PE mulch film, and 97.9 ng/m3 to 142.6 ng/m3 (median 114.9 ng/m3) in greenhouses covered without mulch film. The concentrations of ten UVAs in 65 commercial agricultural films were simultaneously analyzed. Additionally, the potential health risks for greenhouse workers exposed to UVAs were estimated. And the migration simulations showed that the health risk in greenhouses may be higher even if only one UVA is added to the biodegradable mulch film. Therefore, the exposure risk of UVAs in plastic greenhouses needs to be highly prioritized.

Improving a regional project on diagnostic reference levels for interventional procedures (OPRIPALC) with the support of a dose management system for the protection of patients and staff.

Interventional radiology is a clinical practice with important benefits for patients, but which involves high radiation doses. The optimisation of radiation protection (RP) for paediatric interventional cardiology is a priority for both patients and staff. The use of diagnostic reference levels (DRLs) has been proposed by the International Commission on Radiological Protection to improve RP in imaging procedures. Dose management systems (DMSs) allow the automatic collection of dosimetric, geometric and technical data to assist the optimisation process, with a continuous audit of the procedures, generating alerts to implement corrective actions when necessary. Patient dose indicators may be analysed individually and for different radiation events (fluoroscopy and cine runs). Occupational doses per procedure may be analysed (if electronic dosimeters are available) and linked with patient doses for an integrated approach to RP. Regional optimisation programmes require data collection and processing from several countries to set and periodically update the DRLs. Patient data is anonymised, and each participating hospital has access to their data in a central computer server. Using DMSs may be one of the best ways to support these programs in the collection and analysis of data, raising alerts about high patient and occupational doses and suggesting optimisation actions.

Monte Carlo modelling of cyclotron and radioisotope center (CYRIC) at Tohoku University: a radiation protection study.

Protection against ionizing radiations is important in laboratories with radioactive materials and high energy cyclotron beams. The Cyclotron and Radioisotope Center (CYRIC) located in Tohoku University in Miyagi prefecture, Japan and is a well-known nuclear science laboratory with cyclotron beams and substantial number of high activity radioactive materials. Considering this, it is important to perform complete radiation transport computations to ensure the safety of non-occupational and occupational workers. In the present work, we have developed a complete 3-dimensional model of the main cyclotron building and radiation labs using Monte Carlo method. We have found that the dispersed photons and neutrons inside and in the surrounding of the CYRIC building pose no significant risk to occupational and non-occupational workers. The present work and the developed models would be useful in the field of radiation protection.

Investigation of metal concentration distribution and corresponding health exposure assessment of fabricated metal product manufacturers.

The fabricated metal product industries were identified as producers of variable and heterogeneous pollution. Workers in these manufacturing facilities are exposed to multiple pollutants present at variable concentrations. Specific known adverse health effects include bladder cancer associated with metalworking fluid exposure and lung cancer associated with electroplating processes. To reduce the incidence of these adverse effects, the main challenge is to identify the most hazardous pollutants within this complex exposure environment and evaluate the corresponding health potentials. In this study, exposure indices were formulated to assess multiple metal exposures with the ultimate goal of providing relevant information for exposure reduction and control measures. Fifteen plants, including metal mold manufacturing, metal casting, and surface treatment plants, were investigated in terms of total concentration, summation of corresponding ratio to threshold limit value (STLVr), hazard index (HI), and incremental cancer risk. The results revealed that emissions of aluminum, iron, and manganese were primarily found in the metal mold manufacturing/casting plants, while emissions of chromium, nickel, and zinc were found in surface treatment plants. STLVr and HI were more useful than the total concentration for identifying hazardous metals, which were chromium and nickel, and could specify the facilities that were in need of control measures. As for cancer risk, the metal mold manufacturing/casting plants had lower risk than the surface treatment plants, and the contributing metals for these two plant types were cobalt and chromium, respectively. This study established a useful procedure to evaluate health hazards and cancer risk. The resulting information is useful for prioritizing mitigation control of multiple metal exposures.

Object and person tracking systems to enable extremity dosimetry in nuclear medicine using computational methods.

Nuclear medicine (NM) professionals are potentially exposed to high doses of ionising radiation, particularly in the skin of the hands. Ring dosimeters are used by the workers to ensure extremity doses are kept below the legal limits. However, ring dosimeters are often susceptible to large uncertainties, so it is difficult to ensure a correct measurement using the traditional occupational monitoring methods. An alternative solution is to calculate the absorbed dose by using Monte Carlo simulations. This method could reduce the uncertainty in dose calculation if the exact positions of the worker and the radiation source are represented in these simulations. In this study we present a set of computer vision and artificial intelligence algorithms that allow us to track the exact position of unshielded syringes and the hands of NM workers. We showcase a possible hardware configuration to acquire the necessary input data for the algorithms. And finally, we assess the tracking confidence of our software. The tracking accuracy achieved for the syringe detection was 57% and for the hand detection 98%.

Nail salon dust reveals alarmingly high photoinitiator levels: Assessing occupational risks.

Photoinitiators (PIs) are chemical additives that generate active substances, such as free radicals to initiate photopolymerization. Traditionally, polymerization has been considered a green technique that seldomly generates contaminants. However, many researches have confirmed toxicity effects of PIs, such as carcinogenicity, cytotoxicity, endocrine disrupting effects. Surprisingly, we found high levels of PIs in indoor dust. Our analysis revealed comparable levels of PIs in dust from printing shops (geometric mean, GM: 1.33 ×103 ng/g) and control environments (GM: 874 ng/g), underscoring the widespread presence of PIs across various settings. Alarmingly, in dust samples from nail salons, PIs were detected at total concentrations ranging from 610 to 1.04 × 107 ng/g (GM: 1.87 ×105 ng/g), significantly exceeding those in the control environments (GM: 1.43 ×103 ng/g). Nail salon workers' occupational exposure to PIs through dust ingestion was estimated at 4.86 ng/kg body weight/day. Additionally, an in vitro simulated digestion test suggested that between 10 % and 42 % of PIs present in ingested dust could become bioaccessible to humans. This is the first study to report on PIs in the specific environments of nail salons and printing shops. This study highlights the urgent need for public awareness regarding the potential health risks posed by PIs to occupational workers, marking an important step towards our understanding of environmental pollution caused by PIs.