Fresh Osteochondral Allograft Transplantation of the Capitellum for the Treatment of Osteochondritis Dissecans.

BACKGROUND: Osteochondritis dissecans (OCD) of the humeral capitellum is a rare and challenging condition to treat. Several surgical options exist, but in the last few years, the pendulum has swung from debridement and microfracture to restoration of the articular surface. Osteochondral autografts from the rib and knee have been described, but donor-site morbidity is a concern. PURPOSE: To expand the results of fresh osteochondral allograft transplantation (FOCAT) in a previously published report with inclusion of additional patients and a longer follow-up period. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: After institutional review board approval, the charts of patients who underwent FOCAT for OCD of the capitellum between 2006 and 2022 by a single surgeon were reviewed. The majority of cases (94%) had unstable lesions (Minami grades 2 and 3). A trial of nonoperative treatment had failed in all. All patients underwent diagnostic arthroscopy, followed by a mini-open, ligament-sparing approach with grafting using commercially available guides and instruments. RESULTS: A total of 35 patients were identified, of whom 25 were male. The mean age was 16 ± 3.9 years (range, 11-32 years). There were 24 baseball players (19 pitchers and 5 position players), 5 gymnasts, 3 cheerleaders/tumblers, 1 tennis player, 1 student (who did not participate in athletics), and 1 patient with avascular necrosis from chemotherapy. Eighteen patients had a mean flexion contracture of 14.1°± 11.9°. A single osteochondral allograft plug was used in 23 patients (mean diameter, 11.3 ± 2.8 mm), and 12 patients required 2 plugs (Mastercard technique). The mean follow-up was 92.6 ± 54.5 months (range, 24-204 months). There was significant improvement in Oxford (from 25.5 ± 4.9 to 46.7 ± 3.5; P < .00001) and visual analog scale for pain (from 7.5 ± 2 to 0.3 ± 1.0; P < .0001) scores. The mean Single Assessment Numeric Evaluation score at the time of follow-up was 90.6 ± 10.8 (range, 60-100). In overhead athletes, there was significant improvement in the Kerlan-Jobe Orthopaedic Clinic score (from 40.8 ± 11.8 to 90.6 ± 10.8; P < .00001). A postoperative magnetic resonance imaging scan was obtained in 16 (46%) patients at a mean of 32.6 months. In all cases, the graft was incorporated. All overhead athletes were able to return to their sport and perform at the same level or higher for >2 years. Two elbows required a subsequent arthroscopy for loose-body removal; otherwise, there were no other complications. CONCLUSION: FOCAT is an excellent option for treating OCD lesions of the humeral capitellum. Excellent outcomes and high return-to-sport rates were observed, with midterm follow-up showing no graft failures. FOCAT eliminates donor-site morbidity.

Transcending Patient Morphometry: Acromiohumeral Interval to Glenoid Ratio as a Universal Diagnostic Tool for Massive Rotator Cuff Tears.

Background: Morphological differences among various ethnicities can significantly impact the reliability of acromiohumeral interval (AHI) measurements in diagnosing massive rotator cuff tears. This variation raises questions about the generalizability of AHI studies conducted in Western populations to the Asian population. Consequently, the primary objective of this study was to develop a novel parameter that can enhance the diagnosis of massive rotator cuff tears, irrespective of morphometric disparities between individuals of different ethnic backgrounds. Methods: A 10-year retrospective analysis of shoulder arthroscopic surgery patients was conducted, categorizing them into 3 groups based on intraoperative findings: those without rotator cuff tears, those with non-massive tears, and those with massive tears. AHI-glenoid ratio (AHIGR) was measured by individuals with varying academic backgrounds, and its diagnostic performance was compared to AHI. Sensitivity, specificity, accuracy, and intra- and inter-rater reliability were evaluated. Results: AHIGR exhibited significantly improved sensitivity, specificity, and accuracy as a diagnostic tool for massive rotator cuff tears, compared to AHI. A proposed cut-off point of AHIGR ≤ 0.2 yielded comparable results to AHI < 7 mm. Intra- and inter-rater reliability was excellent among different observers. Conclusions: AHIGR emerges as a promising diagnostic tool for massive rotator cuff tears, offering improved sensitivity and specificity compared to AHI. Its reproducibility among diverse observers underscores its potential clinical utility. While further research with larger and more diverse patient cohorts is necessary, AHIGR offers significant potential as a reference for enhancing the assessment of massive rotator cuff tears.

Early evolution of small body size in Homo floresiensis.

Recent discoveries of Homo floresiensis and H. luzonensis raise questions regarding how extreme body size reduction occurred in some extinct Homo species in insular environments. Previous investigations at Mata Menge, Flores Island, Indonesia, suggested that the early Middle Pleistocene ancestors of H. floresiensis had even smaller jaws and teeth. Here, we report additional hominin fossils from the same deposits at Mata Menge. An adult humerus is estimated to be 9 - 16% shorter and thinner than the type specimen of H. floresiensis dated to ~60,000 years ago, and is smaller than any other Plio-Pleistocene adult hominin humeri hitherto reported. The newly recovered teeth are both exceptionally small; one of them bears closer morphological similarities to early Javanese H. erectus. The H. floresiensis lineage most likely evolved from early Asian H. erectus and was a long-lasting lineage on Flores with markedly diminutive body size since at least ~700,000 years ago.

Stature estimation equations for modern American Indians in the American Southwest.

Stature estimation is a core component to the biological profile in forensic anthropology casework. Here we provide mathematical equations for estimating stature for contemporary American Indians (AI), which currently are lacking in forensic anthropology. Drawing on postmortem computed tomography data from the New Mexico Decedent Image Database we regressed cadaveric length on four long bone length measures of the tibia, femur, and humerus to produce 11 combinations of models. Separate regression models were calculated for the entire pooled sample, by sex, broad AI language groups, and age + sex subsamples and compared. Sex-specific models were statistically better than general models, which were more accurate than language group and age + sex models. Equations were created for general and sex-specific models. Application to an independent test sample demonstrates the equations are accurate for stature estimation with overestimates of less than 1 cm. The equations provide similar levels of precision to stature estimation programs like the FORDISC 3.0 module and other stature equations in the literature. We provide recommendations for equation use in casework based on our results. These equations are the first for estimating stature in contemporary AI. This paper demonstrates the appropriateness of these newly created stature equations for use in New Mexico and the surrounding region.

[Bone-cartilage transfer for osteochondritis dissecans of the humeral capitellum]. / Knorpel-Knochen-Transfer bei Osteochondrosis dissecans des Capitulum humeri.

OBJECTIVE: Treatment of focal cartilage defects of the humeral capitellum with autologous bone-cartilage cylinders to prevent development of arthritis of the elbow joint. INDICATIONS: High-grade, unstable lesions (> 50% of the capitellum, grade III-IV according to Dipaola), including those involving the lateral edge of the capitellum and with a depth of up to 15 mm. CONTRAINDICATIONS: Stable lesions and generalized osteochondritis of the capitellum (including Panner's disease), as well as a relative contraindication for lesions > 10 mm, as the largest punch has a maximum diameter of 10 mm. SURGICAL TECHNIQUE: Arthroscopy of the elbow joint, transition to open surgery. First, the size of the cartilage defect in the capitellum is determined. Then, one (or several) osteochondral cylinders (OATS Arthex) are removed, which as far as possible completely encompass the defect zone. Corresponding intact bone-cartilage cylinders are obtained from the ipsilateral proximal lateral femoral condyle, each with a 0.3 mm larger diameter via an additive miniarthrotomy. The "healthy" cylinders are then inserted into the defect zone in a "press fit" technique. POSTOPERATIVE MANAGEMENT: An upper arm cast in neutral position of the hand for 10-14 days, simultaneously beginning physiotherapy (active-assisted movements) and lymphatic drainage. As soon as painless range of motion (ROM) is restored (goal: by week 6), isometric training can be started. Resistance training starts from week 12. Competitive sports are only recommended after 6(-8) months. RESULTS: The current state of research on the surgical treatment of OCD of the humeral capitellum using autologous osteochondral grafts shows mostly promising results. A recent meta-analysis of 24 studies reports a significantly higher (p < 0.01) rate of return to sports (94%) compared to fragment fixation (64%) or microfracture and debridement (71%) [41]. However, the increased donor-site morbidity must be taken into account (ca. 7.8%).

[Autologous minced cartilage implantation for focal cartilage lesions of the humeral capitellum]. / Autologes Minced Cartilage bei fokalen Knorpelschäden des Capitulum humeri.

OBJECTIVE: The goal of minced cartilage implantation (MCI) is to restore an intact cartilage surface in focal osteochondral lesions of the humeral capitellum. INDICATIONS: The indications for MCI are limited osteochondral lesions at the humeral capitellum, also at the head of the radius, with intact cartilage border as well as in situ or a completely detached fragment, and free joint bodies (grade II-grade V according to Hefti). CONTRAINDICATIONS: Contraindications for MCI are already concomitant or associated cartilage damage as well as bilateral osteochondral lesions and insufficient available cartilage material. SURGICAL TECHNIQUE: After diagnostic arthroscopy to detect possible concomitant pathologies and to exclude already corresponding cartilage lesions, the arthroscope is flipped posterolaterally over the high posterolateral portal and a second portal is created under visualization via the soft spot. Initially, debridement of the focal cartilage defect, assessment of the marginal zone, and/or salvage of free joint bodies. Using a smooth shaver and the filter provided, the partially or even completely detached cartilage fragment is unidirectionally fragmented under continuous suction. The remaining defect with a stable marginal zone is cleanly curetted, and the joint is completely dried. The fragmented cartilage collected in the filter is bonded to a membrane using autologous conditioned plasma (ACP) and then arthroscopically applied to the defect via a cannula, sealed using thrombin and fibrin. POSTOPERATIVE MANAGEMENT: Postoperative immobilization in a cast for at least 24 h is required. Afterwards, free exercise of the joint is possible, but no loading should be maintained for 6 weeks. Return to sport after 3 months. RESULTS: Good to very good clinical and MRI morphologic results are already evident in the short-term course. Prospective and retrospective multicenter studies are needed to evaluate future long-term results.

Biomechanical Design Optimization of Distal Humerus Fracture Plates: A Review.

The goal of this article was to review studies on distal humerus fracture plates (DHFPs) to understand the biomechanical influence of systematically changing the plate or screw variables. The problem is that DHFPs are commonly used surgically, although complications can still occur, and it is unclear if implant configurations are always optimized using biomechanical criteria. A systematic search of the PubMed database was conducted to identify English-language biomechanical optimization studies of DHFPs that parametrically altered plate and/or screw variables to analyze their influence on engineering performance. Intraarticular and extraarticular fracture (EAF) data were separated and organized under commonly used biomechanical outcome metrics. The results identified 52 eligible DHFP studies, which evaluated various plate and screw variables. The most common plate variables evaluated were geometry, hole type, number, and position. Fewer studies assessed screw variables, with number and angle being the most common. However, no studies examined nonmetallic materials for plates or screws, which may be of interest in future research. Also, articles used various combinations of biomechanical outcome metrics, such as interfragmentary fracture motion, bone, plate, or screw stress, number of loading cycles to failure, and overall stiffness (Os) or failure strength (Fs). However, no study evaluated the bone stress under the plate to examine bone "stress shielding," which may impact bone health clinically. Surgeons treating intraarticular and extraarticular distal humerus fractures should seriously consider two precontoured, long, thick, locked, and parallel plates that are secured by long, thick, and plate-to-plate screws that are located at staggered levels along the proximal parts of the plates, as well as an extra transfracture plate screw. Also, research engineers could improve new studies by perusing recommendations in future work (e.g., studying alternative nonmetallic materials or "stress shielding"), clinical ramifications (e.g., benefits of locked plates), and study quality (e.g., experimental validation of computational studies).

Combining robotics and 3D printing facilitates closed reduction of humeral shaft fractures using a minimally invasive plate as a reduction template: A proof-of-concept study.

BACKGROUND: Minimally invasive percutaneous plate osteosynthesis for humeral shaft fractures (HSFs) has limitations due to malreduction and radiation exposure. To address these limitations, we integrated robotics and 3D printing by incorporating plates as reduction templates. METHOD: The innovative technology facilitated closed reduction of HSFs in the operating theatre using 18 models with cortical marking holes. The dataset of the precontoured plate was imported into 3D planning software for virtual fixation and screw path planning. The models were divided into half to simulate transverse fractures. During the operation, the software generated drilling trajectories for robot navigation, and precise plate installation achieved automatic fracture reduction. RESULTS: The evaluation results of reduction accuracy revealed variations in length, apposition, alignment, and rotation that meet the criteria for anatomic reduction. High interoperator reliabilities were observed for all parameters. CONCLUSIONS: The proposed technology achieved anatomic reduction in simulated bones.

Radiographic evaluation of the forelimb bone development in maned wolves (Chrysocyon brachyurus).

This study aimed to assess the fusion of growth plates and the development of secondary ossification centres in the forelimb bones of maned wolves (Chrysocyon brachyurus), contrasting the findings with established data from domestic dogs. Three maned wolves, comprising one male and two females, initially aged between 3 and 4 months, were subjected to monthly radiographic evaluations until 10-11 months of age, followed by bimonthly assessments until 18-19 months of age, encompassing both forelimbs. The closure times of growth plates were observed as follows: supraglenoid tubercle (7-8 months), proximal humerus (17-19 months), distal humerus (8-9 months), medial epicondyle of the humerus (8-9 months), proximal ulna (9-10 months), proximal radius (13-15 months), distal ulna (13-15 months) and distal radius (17-19 months). Statistical analysis revealed significant differences in the areas of secondary ossification centres in the proximal epiphyses of the humerus and radius, respectively, observed from the initial evaluation at 8-9 months and 6-7 months. Conversely, the epiphyses of the supraglenoid tubercle, distal humerus, proximal ulna, distal ulna, medial epicondyle of the humerus and distal radius did not exhibit significant area differences between 3-4 months and 4-5 months, yet notable distinctions emerged at 5-6 months. In summary, while the radiographic appearance of epiphyseal growth plates and secondary ossification centres in maned wolves resembles that of domestic dogs, closure times vary. These findings contribute to understanding the dynamics of epiphyseal growth plates in this species.

An Automatic Method for Elbow Joint Recognition, Segmentation and Reconstruction.

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases.

Anterolateral Dual Plate Fixation for Distal Metaphyseal-Diaphyseal Junction Fractures of the Humerus: Biomechanical Finite Element Analysis with Clinical Results.

Background: Distal metaphyseal-diaphyseal junction fractures of the humerus are a subset of injuries between humeral shaft fractures and distal intra-articular humerus fractures. A lack of space for distal fixation and the unique anatomy of concave curvature create difficulties during operative treatment. The closely lying radial nerve is another major concern. The aim of this study was to determine whether anterolateral dual plate fixation could be effective for a distal junctional fracture of the humerus both biomechanically and clinically. Methods: A right humerus 3-dimensional (3D) model was obtained based on plain radiographs and computed tomography data of patients. Two fractures, a spiral type and a spiral wedge type, were constructed. Three-dimensional models of locking compression plates and screws were constructed using materials provided by the manufacturer. The experiment was conducted by using COMSOL Multiphysics, a finite element analysis, solver, and simulation software package. For the clinical study, from July 2008 to March 2021, a total of 72 patients were included. Their medical records were retrospectively reviewed to obtain patient demographics, elbow range of motion, Disabilities of the Arm, Shoulder and Hand (DASH) scores, Mayo Elbow Performance Scores (MEPS), and hand grip strength. Results: No fracture fixation construct completely restored stiffness comparable to the intact model in torsion or compression. Combinations of the 7-hole and 5-hole plates and the 8-hole and 6-hole plates showed superior structural stiffness and stress than those with single lateral plates. At least 3 screws (6 cortices) should be inserted into the lateral plate to reduce the load effectively. For the anterior plate, it was sufficient to purchase only the near cortex. Regarding clinical results of the surgery, the range of motion showed satisfactory results in elbow flexion, elbow extension, and forearm rotation. The average DASH score was 4.3 and the average MEPS was 88.2. Conclusions: Anterolateral dual plate fixation was biomechanically superior to the single-plate method in the finite element analysis of a distal junctional fracture of the humerus model. Anterolateral dual plate fixation was also clinically effective in a large cohort of patients with distal junctional fractures of the humerus.

Os supratrochleare anterius: a very rare clinical case and review of literature.

PURPOSE: The accessory bones around the elbow are very rare variant structures, present in approximately 0.7% of cases. They can cause diagnostic problems and can be mistaken for pathological structures, especially when pain and limitation of elbow movements are present and a trauma can be traced in the patient's history. They are of different nature, either presenting within muscle tendons as sesamoids (brachialis and triceps brachii muscles) or presenting intra-articularly probably as separated or accessory ossification centres. The least common is the os supratrochleare anterius. METHODS: We present a case of a young male, featuring chronic blocking and 20° limited flexion of his right elbow, which bothered him during his occupation as a locksmith. In history, he suffered minor trauma to the elbow 20 years ago. X-ray and CT showed a large ossicle in the coronoid fossa of the humerus. RESULTS: The ossicle was surgically extracted in small pieces. The patient left satisfied with no mention of complaints. CONCLUSION: The os supratrochleare anterius is a very rare accessory bone of the elbow, located in the coronoid fossa of the humerus which can mimic many pathological states, and limit movements and causing pain around the elbow.

Assessing screw length impact on bone strain in proximal humerus fracture fixation via surrogate modelling.

A high failure rate is associated with fracture plates in proximal humerus fractures. The causes of failure remain unclear due to the complexity of the problem including the number and position of the screws, their length and orientation in the space. Finite element (FE) analysis has been used for the analysis of plating of proximal humeral fractures, but due to computational costs is unable to fully explore all potential screw combinations. Surrogate modelling is a viable solution, having the potential to significantly reduce the computational cost whilst requiring a moderate number of training sets. This study aimed to develop adaptive neural network (ANN)-based surrogate models to predict the strain in the humeral bone as a result of changing the length of the screws. The ANN models were trained using data from FE simulations of a single humerus, and after defining the best training sample size, multiple and single-output models were developed. The best performing ANN model was used to predict all the possible screw length configurations. The ANN predictions were compared with the FE results of unseen data, showing a good correlation (R2 = 0.99) and low levels of error (RMSE = 0.51%-1.83% strain). The ANN predictions of all possible screw length configurations showed that the screw that provided the medial support was the most influential on the predicted strain. Overall, the ANN-based surrogate model accurately captured bone strains and has the potential to be used for more complex problems with a larger number of variables.

Efficacy of denosumab treatment for lung metastasis secondary to proximal humerus chondroblastoma.

Chondroblastoma is a rare benign cartilaginous tumor that accounts for approximately 1% of bone tumors, but it can be associated with lung metastasis in extremely rare cases, leading to a poor prognosis and death. Herein, we report the case of a 19-year-old male patient who presented with an aggressive chondroblastoma of the proximal humerus and bilateral lung metastasis. The patient was treated with wide local resection, partial metastasectomy, and denosumab. Denosumab treatment was effective in controlling metastatic progression and preventing local recurrence.

A hyaena on stilts: comparison of the limb morphology of Ictitherium ebu (Mammalia: Hyaenidae) from the Late Miocene of Lothagam, Turkana Basin, Kenya with extant Canidae and Hyaenidae.

The long, gracile morphology of the limb bones of the Late Miocene hyaenid Ictitherium ebu has led to the hypothesis that this animal was cursorial. The forelimb and femur of the holotype were compared with specimens of extant Hyaenidae and Canidae. Two morphometric methods were used. The first used measurements to calculate indices of different morphological characters. The second method involved capturing photographs of the anterior distal humerus of each specimen, mapping six landmarks on them, and calculating truss distances. These distances represent a schematic reproduction of the elbow. Multivariate statistical analysis primarily separated the data based on taxonomy, yet locomotor and habitat categories were also considered. Ictitherium ebu has an overall morphology similar to that of the maned wolf and a distal humerus reminiscent of that of the aardwolf. The long, gracile limb bones of I. ebu are suggested to be adaptations for pouncing on prey, for locomotor efficiency, and for looking over the tall grass of the open environments the animal lived in, much like the present-day maned wolf.

Comparison of reconstructive techniques for nonprimary malignancies in the proximal humerus.

BACKGROUND: Endoprostheses (EPC) are often utilized for reconstruction of the proximal humerus with either hemiarthroplasty (HA) or reverse arthroplasty (RA) constructs. RA constructs have improved outcomes in patients with primary lesions, but no studies have compared techniques in metastatic disease. The aim of this study is to compare functional outcomes and complications between HA and RA constructs in patients undergoing endoprosthetic reconstruction for proximal humerus metastases. METHODS: We retrospectively reviewed our institutional arthroplasty database to identify 66 (56% male; 38 HA and 28 RA) patients with a proximal humerus reconstruction for a non-primary malignancy. The majority (88%) presented with pathologic fracture, and the most common diagnosis was renal cell carcinoma (48%). RESULTSS: Patients with RA reconstructions had better postoperative forward elevation (74° vs. 32°, p < 0.01) and higher functional outcome scores. HA patients had more complications (odds ratio 13, p < 0.01), with instability being the most common complication. CONCLUSIONS: Patients with nonprimary malignancies of the proximal humerus had improved functional outcomes and fewer complications after undergoing reconstruction with a reverse EPC compared to a HA EPC. Preference for reverse EPC should be given in patients with good prognosis and ability to complete postoperative rehabilitation.

Automatic bicipital groove identification in arthritic humeri for preoperative planning: A Random Forest Classifier approach.

The bicipital groove is an important anatomical feature of the proximal humerus that needs to be identified during surgical planning for procedures such as shoulder arthroplasty and proximal humeral fracture reconstruction. Current algorithms for automatic identification prove ineffective in arthritic humeri due to the presence of osteophytes, reducing their usefulness for total shoulder arthroplasty. Our methodology involves the use of a Random Forest Classifier (RFC) to automatically detect the bicipital groove on segmented computed tomography scans of humeri. We evaluated our model on two distinct test datasets: one comprising non-arthritic humeri and another with arthritic humeri characterized by significant osteophytes. Our model detected the bicipital groove with a mean absolute error of less than 1mm on arthritic humeri, demonstrating a significant improvement over the previous gold standard approach. Successful identification of the bicipital groove with a high degree of accuracy even in arthritic humeri was accomplished. This model is open source and included in the python package shoulder.

Effect of geometrical design variables on implantation configuration and fixation stiffness of titling bone anchors: A parametric finite element study.

The mechanical interaction of a tilting anchor and cancellous bones of various densities was simulated using finite element modeling. The model enjoyed a sophisticated representation of the bone, as an elasto-plastic material with large deformation capability. The anchor's tilting action during implantation phase, as well as its fixation stiffness during pull-out test, were predicted by the model and a parametric study was performed to investigate the effects of the anchor's distal width and corner fillet radius, on these measures. The model predictions were validated against the results of an experimental test on ovine humerus specimens. The model could reasonably reproduce the tilting action of the anchor during the implantation phase. Comparison of the model predictions with the experimental results revealed similar trends during both the implantation and the pull-out phases, but smaller displacement magnitudes (end points: 1.4 vs. 2.1 mm and 4.6 vs. 5.2 mm, respectively). The results of the parametric study indicated substantial increase in the fixation stiffness with increasing bone density. Reducing the distal width and increasing the fillet radius improved the anchor's implantation configuration and fixation stiffness in low-density bones. For high-density bone applications, however, a larger distal width was favored for improving the fixation stiffness.

Anatomical Study of Bicipital Groove of Dry Adult Human Cadaveric Humerus in Bangladesh.

The bicipital groove is a groove on the anterior aspect of the proximal end of the humerus. It lies between the greater and lesser tubercles. The variations of this groove may lead to various pathologies of the biceps brachii tendon, one of the most common causes of shoulder pain. Hence, this study examines the various osteometric parameters of bicipital groove in the Bangladeshi population. This cross-sectional descriptive study was done on 100 dry adult human cadaveric humeri (43 right sides and 57 left sides) in the Department of Anatomy, Mymensingh Medical College, Bangladesh from July 2021 to June 2022. The length, maximum width and depth of the bicipital groove and the length of this groove's medial and lateral walls were measured using a digital Vernier slide caliper. Data were recorded in a predesigned data sheet separately and analyzed statistically using Microsoft Excel and SPSS. According to the present study, the mean±SD length of the bicipital groove of the right humeri was 66.646±11.563mm and the left humeri were 66.002±13.025mm. The mean±SD maximum width of the bicipital groove of the right humeri was 10.870±1.799mm and the left humeri were 11.480±1.402mm. The mean±SD depth of the bicipital groove of the right humeri was 4.242±0.655mm and the left humeri were 4.452±0.854mm. The mean±SD medial wall length of the bicipital groove of the right humeri was 60.671±12.360mm and the left humeri were 59.161±13.660mm. The mean±SD lateral wall length of the bicipital groove of the right-sided humeri was 64.996±11.611mm and the left humeri were 64.074±13.115mm. It is expected that this osteometric study of bicipital groove among the Bangladeshi population will be very helpful for clinical anatomists, orthopaedic surgeons, anthropologists and radiologists.

Novel Dual Bicolumnar Fibula Graft Reconstruction of Distal Humerus in Pediatric Patients After Massive Bone Resection: A Report of Two Cases.

CASE: We describe 2 case studies, involving a 10-year-old girl with an aneurysmal bone cyst and a 12-year-old adolescent boy with Ewing sarcoma. The patient with Ewing sarcoma was previously managed with wide surgical excision and fibular graft reconstruction and subsequently experienced significant graft resorption, hardware failure, and fracture 24 months after operation. A revision limb salvage attempt was undertaken. In both cases, fibular strut grafts were harvested and fixed with intramedullary k-wires to recreate the medial and lateral columns of the distal humeral triangle. CONCLUSION: The technique achieved complete osseous integration, structural support, and functional restoration of the elbow in both cases, with good functional outcomes.