Focus on leveling the hidden: managing impacted maxillary canines.

INTRODUCTION: The long pathway that the canines take as they emerge into the maxillary arch makes them vulnerable to disruption during their natural emergence time. The process of planning treatment for impacted maxillary canine (IMC) presents significant challenges, underscoring the need for careful consideration and expertise. OBJECTIVE: The aim of this article was to shed light on these complexities by discussing clinical case studies involving IMC, providing insights into the intricacies of their management. CONCLUSIONS: The management of IMC within orthodontics presents a multifaceted challenge that include the necessity for precise diagnostic processes, prudent use of cone beam computed tomography (CBCT), the strategic selection between open and closed exposure techniques, a in-depth understanding of the specific orthodontic biomechanics involved, and a keen awareness of potential adverse outcomes such as ankylosis, prolonged treatment times, root resorption, and additional complications.

All-on-four híbrido - implante pterigoide para solução posterior de maxila atrófica / All-on-four hybrid - pterygoid implant for posterior solution of atrophic maxilla

O edentulismo tem uma série de consequências deletérias para a saúde bucal e geral. As consequências bucais variam desde a bem conhecida reabsorção do rebordo residual até uma função mastigatória prejudicada, uma dieta não saudável, incapacidade social e má qualidade de vida da saúde bucal. Para superar essas dificuldades, pode-se dispor de procedimentos cirúrgicos, como os implantes pterigoideos. Realizar uma análise, por meio de revisão de literatura, da técnica all-on-four híbrida com implantes pterigoideos, como alternativa a reabilitação em maxila atrófica. Foi realizada uma revisão da literatura, com seleção de artigos indexados nas bases de dados PubMed, Scielo, Cochrane e Google Acadêmico. Nesses levantamentos foram utilizados termos como: "all-on-four", "implantes inclinados", "implantes pterigoideos", "implantes zigomáticos" e "maxilla atrófica", e suas correspondentes em inglês. Com essa revisão de literatura pode-se inferir que a técnica all-on-four híbrida utilizando implantes pterigoideos para reabilitação de maxila atrófica é uma possibilidade segura, eficaz e previsível que soluciona casos que apresentam limitações ósseas. Quando bem executada pelo profissional é possível devolver ao paciente função e estética anteriormente comprometidas, consequentemente reestabelecimento da qualidade de vida do indivíduo.

Edentulism has a number of deleterious consequences for oral and general health. Oral consequences range from the well-known residual ridge resorption to impaired masticatory function, an unhealthy diet, social disability and poor oral health quality of life. To overcome these difficulties, surgical procedures can be used, such as pterygoid implants. However, these are not without complications. Through a literature review, of the hybrid all-on-four technique with pterygoid implants as an alternative to rehabilitation in atrophic maxilla. For this, bibliographic research was carried out in the databases PubMed, Scielo, Cochrane and Google Scholar, using the following search terms: "all-on-four", "tilted implants", "pterygoid implants", "zygomatic implants" e "atrophic maxilla", in both Portuguese and English languages. With this literature review, It can be inferred that the hybrid all-on-four technique using pterygoid implants for rehabilitation of atrophic maxilla is a safe, effective and predictable possibility that solves cases with bone limitations. When well performed by the professional, it is possible to return previously compromised function and aesthetics to the patient, consequently reestablishing the individual's quality of life.

Primary stability with osseodensification drilling of dental implants in the posterior maxilla region in humans: A systematic review.

Currently, a new non-subtractive drilling technique, called osseodensification (OD), has been developed. It involves using specially designed drills with large negative cutting angles that rotate counterclockwise, causing expansion through plastic bone deformation, thus compacting the autologous bone to the osteotomy walls, which improves the primary stability of the implant.The present systematic review aimed to determine whether the OD technique can increase the primary stability of dental implants in the posterior maxilla region as compared to the conventional drilling (CD) technique.Five databases were searched up to June 30, 2022. The inclusion criteria embraced observational clinical studies, randomized and non-randomized controlled trials, human studies in vivo, comparing OD and CD, with the measurement of the primary stability of implants in the posterior maxilla region by means of the implant stability quotient (ISQ). The tools used to assess the risk of bias were RoB 2 and the NewcastleOttawa Scale (NOS).Seven articles met the inclusion criteria, with 4 classified as having a low risk of bias and 3 with a moderate risk of bias. The OD technique consistently demonstrated an average ISQ value of 73 KHz across all studies, whereas CD yielded an average value of 58.49 kHz (p < 0.001 for 5 articles).It can be concluded that in comparison with CD, OD improves primary stability at baseline in low-density bone, such as the maxilla.

Effect of treatment of transverse maxillary deficiency using rapid palatal expansion on oral health-related quality of life in children: complementary results for a controlled clinical trial.

OBJECTIVE: To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders. MATERIALS AND METHODS: Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ8 - 10 before RPE, during RPE (T1), at the end of RPE (T2), and 1 month after appliance removal (T3). Generalized mixed models were fitted to assess the effect of the Haas-type expander compared to previously collected data (a nontreated and a Hyrax-type expander-treated group). RESULTS: RPE with Haas-type appliances had a negative impact on overall OHRQOL at T1 and T2 (P = 0.001), and a positive impact at T3 (P = 0.001). The Haas-type expander had a significantly greater negative impact on OHRQOL than the Hyrax-type appliance during RPE. At T1, overall scores using the Haas-type expander were 1.08 times the scores using the Hyrax-type expander (i.e., 8% increase; 95% CI, 1.01-1.17; P = 0.033). Patients using the Haas appliance had 1.24 times the scores of those using Hyrax-type devices for the oral symptoms domain at T1 (i.e., 24% increase; 95% CI, 1.06-1.46; P = 0.009). CONCLUSIONS: Correction of the transverse maxillary deficiency by RPE using the Haas appliance in children 8-10 years improves OHRQOL. The Haas- and Hyrax-type devices temporarily worsen OHRQOL during treatment, however, the negative impact is less with the Hyrax-type expander than with the Haas-type expander, because it causes fewer negative oral symptoms. CLINICAL RELEVANCE: From a patient-centered perspective, the use of the Hyrax over the Haas appliance may be suggested as it causes less negative oral symptoms during use.

Fluctuating arch symmetry: a comparison of two methods of assessment - applicability and efficiency.

INTRODUCTION: Symmetry is balance, some correspondence in the size, form, and arrangements of parts on opposite sides of a plane, line, or point. The opposite of this concept is asymmetry, or imbalance. OBJECTIVE: This retrospective study compared two methods for assessing arch symmetry with linear measurements based on triangles, to determine their applicability and efficiency. METHODS: Two groups were enrolled: children (n=20) and adults (n=20), and the arch symmetry was assessed from linear measurements. Method 1: the incisor-canine (INC), canine-molar (CM), and incisor-molar (INM) distances (paired t-test and Pearson correlation). Method 2: a mathematical equation between the cusps measurements of the canines and the distobuccal of the first molars leading to result 1 (t-test for one sample and bootstrapping analysis). Dental casts were digitized and analyzed using a software program. The Bland-Altman test compared the methods (α=0.05). RESULTS: The Bland-Altman test revealed concordance between the methods; however, separately the results were different: In method 1, the mandibular arch did not demonstrate correlation (children, INC r=0.33; CM r=0.45; INM r=0.51; adults, CM r=0.46; INM r=0.35), however, the maxilla revealed a strong correlation in children and a strong/moderate correlation in adults. In method 2, both arches were symmetrical (p>0.05). CONCLUSION: Method 1 may be appropriate during orthodontic treatment, and method 2 may be indicated for final treatment. These methods are useful; however, only method 1 identified the side of asymmetry. The methods can contribute to future studies in syndromic and non-syndromic patients, before and after orthognathic surgeries and orthodontic treatment, comparing results.

Root volume measurements of maxillary canines and lateral incisors in patients with unilateral maxillary canine impaction.

OBJECTIVE: This study aimed to assess root volumes of maxillary canines and adjacent lateral incisors in patients with unilateral maxillary canine impaction. METHODS: This cross-sectional study was performed on cone-beam computed tomography (CBCT) scans of 100 patients (49 females and 51 males) with unilateral maxillary canine impaction. The images were loaded in Planmeca Romexis Viewer, and root layers between the cementoenamel junction and apex were reconstructed at 600-µm intervals. At each layer, the root boundary was marked, and finally, the root volume was calculated by multiplying the layers' area by the thickness of 600 µm. The root size of canines and lateral incisors was compared between the impaction and normal eruption sides. RESULTS: Sixty-two patients showed buccal canine impaction, and 38 presented palatal impaction. The mean root volume of canines on the impaction side was significantly greater than that on the normal eruption side; either the tooth was buccally or palatally impacted (p<0.001). The lateral incisors on the side of buccally-impacted canines showed a significantly smaller root volume than that of the contralateral side (p<0.001). However, there was no significant difference in the root size of lateral incisors between the two sides in cases presenting palatal canine impaction (p=0.177). CONCLUSION: The difference in root volume of canines between the two sides can serve as an indicator of canine impaction. The reduction in the root size of the lateral incisor on the side of the buccally impacted canine may be due to root resorption created by pressure from the canine's crown.

Metal artifact reduction tool and mA levels impact on the diagnosis of fracture extension in endodontically treated teeth using cone-beam CT.

AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.

Bone Regeneration in the Anterior Maxilla With Titanium Mesh and Advanced-Platelet-Rich Fibrin: A Case Report With 2-Year Follow-up.

Guided bone regeneration involving the use of titanium mesh and platelet-rich fibrin could be a feasible approach in cases of severely atrophic ridges. The purpose of this case report was to present an esthetic and functional rehabilitation in the anterior maxilla with the installation of dental implants in conjunction with guided bone regeneration using titanium mesh and advanced platelet-rich fibrin (A-PRF). A 60-year-old patient presented bone atrophy and partial edentulism in the anterior maxilla. After clinical and cone beam computed tomography assessment, guided bone regeneration was planned using a titanium mesh and A-PRF with xenograft bone. After 8 months of healing, the dental implants were placed with the aid of a surgical guide to obtain accurate 3-dimensional positioning. Prosthetic rehabilitation was carried out with individualized crowns. After 2 years of follow-up, radiographic analysis demonstrated a good quality and density of the bone tissue adjacent to the dental implants. No radiolucent areas were observed, and there were no clinical signs of failure. In cases of severe atrophy, using a titanium mesh and A-PRF proved to be a feasible alternative for bone reconstruction prior to dental implant placement. This approach can aid dental professionals in achieving an ideal implant positioning for rehabilitation with individualized crowns.

Sex determination through maxillary dental arch and skeletal base measurements using machine learning.

BACKGROUND: Cranial, facial, nasal, and maxillary widths have been shown to be significantly affected by the individual's sex. The present study aims to use measurements of dental arch and maxillary skeletal base to determine sex, employing supervised machine learning. MATERIALS AND METHODS: Maxillary and mandibular tomographic examinations from 100 patients were analyzed to investigate the inter-premolar width, inter-molar width, maxillary width, inter-pterygoid width, nasal cavity width, nostril width, and maxillary length, obtained through Cone Beam Computed Tomography scans. The following machine learning algorithms were used to build the predictive models: Logistic Regression, Gradient Boosting Classifier, K-Nearest Neighbors (KNN), Support Vector Machine (SVM), Multi-Layer Perceptron Classifier (MLP), Decision Tree, and Random Forest Classifier. A 10-fold cross-validation approach was adopted to validate each model. Metrics such as area under the curve (AUC), accuracy, recall, precision, and F1 Score were calculated for each model, and Receiver Operating Characteristic (ROC) curves were constructed. RESULTS: Univariate analysis showed statistical significance (p < 0.10) for all skeletal and dental variables. Nostril width showed greater importance in two models, while Inter-molar width stood out among dental measurements. The models achieved accuracy values ranging from 0.75 to 0.85 on the test data. Logistic Regression, Random Forest, Decision Tree, and SVM models had the highest AUC values, with SVM showing the smallest disparity between cross-validation and test data for accuracy metrics. CONCLUSION: Transverse dental arch and maxillary skeletal base measurements exhibited strong predictive capability, achieving high accuracy with machine learning methods. Among the evaluated models, the SVM algorithm exhibited the best performance. This indicates potential usefulness in forensic sex determination.

Micro-osteoperforation for enhancement of orthodontic movement: A mechanical analysis using the finite element method.

BACKGROUND: Micro-osteoperforation is a minimally invasive technique aimed at accelerating tooth movement. The goal of this novel experimental study was to assess tooth movement and stress distribution produced by the force of orthodontic movement on the tooth structure, periodontal ligament, and maxillary bone structure, with and without micro-osteoperforation, using the finite element method. MATERIALS AND METHODS: Cone-beam computed tomography was used to obtain a virtual model of the maxilla and simulate the extraction of right and left first premolars. Three micro-osteoperforations (1.5 x 5 mm) were made in the hemiarch on the distal and mesial surfaces of upper canines, according to the power tip geometry of the Propel device (Propel Orthodontics, Ossining, New York, USA). An isotropic model of the maxilla was fabricated according to the finite element method by insertion of mechanical properties of the tooth structures, with orthodontic force (1.5 N) simulation in the distal movement on the upper canine of a hemiarch. RESULTS: Initial movement was larger when micro-osteoperforations were performed on the dental crown (24%) and on the periodontal ligament (29%). In addition, stress distribution was higher on the bone structure (31%) when micro-osteoperforations were used. CONCLUSIONS: Micro-osteoperforations considerably increased the movement of both the dental crown and periodontal ligament, which highlights their importance in the improvement of orthodontic movement, as well as in stress distribution across the bone structure. Important stress absorption regions were identified within micro-osteoperforations.

MISMARPE protocol: minimally invasive surgical and miniscrew-assisted rapid palatal expansion.

OBJECTIVE: The purpose of this article is to present the MISMARPE technique, a new minimally invasive surgical procedure to treat maxillary transverse atresia in adult patients under local anesthesia and on an outpatient basis. TECHNIQUE DESCRIPTION: The technique consists of miniscrew-assisted rapid palatal expansion (MARPE) associated with a minimally invasive approach using maxillary osteotomies, latency and activation periods until the desired expansion is achieved. The present MISMARPE technique was performed in 25 consecutive cases with a success rate of 96%, yielding good skeletal outcomes with minimal trauma. The expander appliances, with their anchorage types, and a description of the surgical steps of the MISMARPE technique are presented. CONCLUSION: MISMARPE is a new and effective alternative for less invasive treatment of maxillary transverse deficiency in adults, compared to conventional surgery. Emphasis is placed on the importance of systematic and well-established protocols, for executing the procedures safely and predictably.

Obturator prostheses with intramucosal retention system in patients with maxillectomy.

PURPOSE: To evaluate the intramucosal retention system in patients' masticatory efficiency and quality of life in this case series. MATERIAL AND METHODS: A total of 3 individuals with maxillectomy were included for rehabilitation with a complete obturator prostheses with an intramucosal retention system (OPI). The complete obturator prostheses was made for 60 days, and electromyography assessments and bite force were applied before, after 30, 60, and 90 days of surgery and prostheses installation. The University of Washington Quality of Life Questionnaire (UW-QoL) and the Obturator Functional Scale (OFS) were also administered at baseline and in the same follow-up periods. The electromyography was evaluated on both sides of the masseter, temporalis, and buccinator muscles while chewing hard and soft food. The maximum bite force was recorded in the central incisors and both sides of the first molar region. RESULTS: Bite force values increased in the first molar region, and muscular electrical activity remained constant. Items related to the taste and swallowing of the UW-QOL impacted. Most OFS questionnaire data responses indicated that patients improved in swallowing liquid foods and appearance. CONCLUSIONS: The rehabilitative capacity improves masticatory efficiency and QoL in adults maxilectomized and rehabilitated with OPI analysis in the study. Further clinical studies should be encouraged to determine the effectiveness of this retentive system.

Prevalence and Pattern of Tooth Impaction: A Radiographic Study in a Trinidadian Population.

OBJECTIVE: The aim of this retrospective study was to determine the prevalence and patterns of impacted third molars in a Trinidadian population. METHODS: A total of 1500 orthopantomograms (OPG) taken at the School of Dentistry, University of the West Indies, from 2008 to 2019 in patients between 15 and 67 years old were evaluated. From the data collected, the prevalence of third molar impaction, the parameters of gender, angulation, level of impaction, and associated pathologies were evaluated. Other types of impacted teeth were also recorded. RESULTS: Of the 1500 OPG viewed, 408 (27.2%) of the study sample presented with at least one impacted third molar. 161 (39.5%) were males and 247 (60.5%) were females, with a male-to-female ratio of 1:1.5. There was a greater incidence of mandibular third molars versus maxillary third molars, which had a frequency of 77.9% and 22.1%, respectively. The most common type of impaction (Winter's classification) was horizontal in the mandible and distoangular in the maxilla. The most common level of impaction in the mandible (Pell and Gregory classification) was level 1A. The total number of impacted teeth was 775, and of these, 75 (9.7%) showed other impacted teeth besides the third molars. Canines and second premolars were the most prevalent with 7.6% and 1.5%, respectively. Caries on the second molar (49.3%) and third molars (40%) were the most frequently associated pathologies identified. CONCLUSION: The prevalence of impacted wisdom teeth in this study was 27%. These results raise awareness and provide insight among dental professionals in Trinidad as to the prevalence of impacted third molars, their patterns, as well as commonly associated pathologies, and the need for screening within the population.

Radiographic characterization of the maxillary septum and septal bullae in horses: An ex vivo study.

The anatomical variations of the maxillary septum and the septal bullae can generate challenges during the interpretation of radiographs of the horses' heads and make it difficult to accurately identify the sites affected in sinus disorders. The description of the radiographic appearance of these structures is currently scarce in the scientific literature. This work aims to describe the anatomical and radiographic characteristics of the maxillary septum and maxillary septal bullae in horses. Six chemically preserved equine cadaver heads were used which, after being submitted to the maxillary osseous flap, the maxillary septum and its respective bullae were identified. Radiographic examinations before and after contrast impregnation on these structures were performed. The positioning of the maxillary septum varied between the anatomical specimens and between the sides of the same specimen. The 30° oblique dorsoventral lateral and lateral projections allowed the identification of the maxillary septum and septal bullae. However, the bullae remained superimposed on the dental arches in the dorsoventral projections with the mandible in a neutral position or with the mandible displaced. The oblique offset radiographic positioning was suggested and proved effective for the examination of the maxillary septal bullae, where the mandible was displaced to the side of the bullae to be examined, and the radiographic beam inclined in the same direction. The maxillary septum and its bullae could be properly identified in a macroscopic way after the osseous flap and the contrasted radiographic examination allowed its adequate interpretation. Variations in size and position are considered normal for the equine species.

Maxillary arch dimensions in bilateral cleft lip and palate in the age 0-5 months.

INTRODUCTION: The complete bilateral cleft lip and palate (BCLP) divides the maxillary arch into three segments, separated from each other, resulting in abnormal growth of the alveolar arch. This study evaluated the maxillary arch dimensions in BCLP and compared them with neonates without craniofacial anomalies. METHODS: This retrospective study was conducted in a tertiary cleft centre. Sixty-six neonates aged 0-5 months were divided into two groups: cleft group-children with BCLP (23 boys and 18 girls) and control group-children without craniofacial deformities (15 boys and 10 girls). The dental models were processed by a 3D scanner. Landmarks were marked to achieve inter-canine distance, inter-tuberosity distance and arch length measurements. t-Tests were used for intergroup comparisons (p < .05). RESULTS: The maxillary cleft arch was demonstrated to be wider and longer in the posterior region compared to the control group. The inter-canine distance did not present differences between the cleft and controls. The inter-canine distance of the control group was the only measurement influenced by the variable sex. CONCLUSIONS: The cleft significantly interfered with the arch posterior width and arch sagittal length, making them larger. There was no statistical difference in the measurements between sex in the cleft group.

Influence of torque and bone type on stability quotient of two implant platforms: a clinical trial.

The objective of this study was to analyze the influence of insertion torque, bone type, and peri-implant bone loss on implant stability quotient (ISQ) of cylindrical external hexagon (EH) and Morse Taper (MT) implants. Forty-four single implants were placed in the edentulous areas of 20 patients who met the inclusion and exclusion criteria. Immediately after implant placement (t1) and after osseointegration (four and six months for mandible and maxilla, respectively) (t2), insertion torque, resonance frequency, and peri-implant bone loss were measured using probing depths and digital periapical radiography. A significant difference was noted in the ISQ values between t1 and t2 in type III bone for EH and MT implants. No significant difference in bone loss values was observed when comparing bone types for EH or MT in all evaluated sites. Based on marginal bone loss assessed using radiography, there was no significant difference between the MT and EH groups. A positive correlation between torque and ISQ t1 value was observed for MT (correlation: 0.439; p = 0.041) and EH (correlation: 0.461; p = 0.031) implants. For EH and MT implants, the greater the insertion torque, the greater was the ISQ value (moderately positive correlation). A weak negative correlation was found between bone type and ISQ t1 for MT implants. Contrarily, no correlation was observed between bone type and ISQ t1 for EH implants. In all cases, bone loss around the implants was clinically normal.

Somatosensory alterations after single-unit dental implant immediate loading: A 1-year follow-up study.

OBJECTIVE: This cohort study aimed to assess the incidence of somatosensory alterations after implant surgery using standardized quantitative and qualitative sensory testing. METHODS: 33 participants with single-tooth loss, undergoing immediate implant loading were included. Quantitative Sensory Testing (QST) and Qualitative Sensory Testing (QualST) were conducted at eight time points over a year (baseline to 1 year). Two-Way Repeated Measures ANOVA and post hoc Tukey test were used on QST values and Cochran Q test on QualST. RESULTS: The study revealed significant increase in thermal thresholds overtime. At the operated side, overall Cold Pain Threshold (extraoral: p = 0.030; intraoral: p < 0.001), and Cold Detection Threshold (intraoral: p < 0.001) increased overtime. In contralateral region, maxilla Cold Detection Threshold (extraoral: p = 0.024; intraoral: p = 0.031), Warm Detection Threshold (extraoral: p = 0.026; intraoral: p = 0.047) and overall Cold Pain Threshold (extraoral and intraoral: p < 0.001) also increased. QualST showed extraoral pinprick (p = 0.032) and intraoral pinprick (p = 0.000), cold (p = 0.000) and touch (p = 0.002) stimuli abnormalities overtime. CONCLUSIONS: Somatosensory alterations after implant surgery were detected in both quantitative and qualitative sensory assessments, but rapidly decreased during the first follow-ups, and then continuously until 1-year. CLINICAL SIGNIFICANCE: This study provides clinical and controlled evidence on the real effect of the somatosensory alterations overtime, leading to a better understanding of neurosensory behaviour after single-tooth dental implant rehabilitation.

Report of intraosseous intravascular papillary endothelial hyperplasia associated with an odontogenic cyst in the maxilla and literature review.

Intravascular papillary endothelial hyperplasia (IPEH) represents an uncommon reactive endothelial hyperplastic proliferation. A 46-year-old man experienced increased volume in the right maxilla, elevation of the nasal ala, and swelling of the hard palate with a reddish hue for 3 months. Computed tomography revealed an expansive hypodense region and cortical bone destruction associated with an impacted supernumerary tooth and an endodontically treated tooth. Under the differential diagnoses of a radicular cyst, dentigerous cyst, and ameloblastoma, an exploratory aspiration and incisional biopsy were performed. This revealed the formation of blood vessels of various diameters lined by endothelium, forming intravascular papillae positive for CD-34. The definitive diagnosis was IPEH, and the patient was treated by embolization and surgery. Histological analysis confirmed the presence of IPEH associated with an odontogenic cyst. After 12 months of follow-up, no recurrence was observed. Also, we reviewed case reports of IPEH affecting the maxilla and mandible. Fourteen intraosseous cases were reported in the maxilla and mandible, with a preference for males and affecting a wide age range. Complete surgical excision was the treatment of choice, and recurrences were not reported. The pathogenesis of IPEH is controversial and may originate from trauma or inflammatory processes. To the best of our knowledge, this is the first report of an association of IPEH with an odontogenic cyst. The importance of IPEH in the differential diagnosis of intraosseous lesions in the jaws is emphasized, and preoperative semiotic maneuvers are needed to prevent surgical complications.

Integrated correlation analysis of the thickness of buccal bone and gingiva of maxillary incisors.

OBJECTIVE: This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants. METHODOLOGY: Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters. RESULTS: The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%). CONCLUSION: Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.

The efficiency of a customized distalizer with Variety SP® screws anchored on palatal miniscrews for upper molar distalization.

OBJECTIVE: To assess the effectiveness of a customized distalizer with Variety SP® screws anchored on palatal miniscrews for upper molar distalization. METHODS: Seventeen patients aged between 12.5 and 24 years underwent distalization with a customized distalizer. Lateral cephalogram and cast analysis were performed before and after distalization. Linear and angular parameters of the upper first molar, first premolar, and central incisor were assessed. RESULTS: Distalization with the force passing near the center of resistance (CRes) of the upper first molars resulted in distal movement, with minimal distal tipping (2.8 ±â€Š0.45°, p< 0.05). However, distalization passing occlusal to the CRes led to greater distal tipping (13.6 ±â€Š1.63°, p< 0.05). Statistically significant spontaneous distal tipping and distal movement of the upper first premolars occurred, with a mean of 6.2 ±â€Š1.24° (p< 0.05) and 0.68 ±â€Š0.34 mm (p< 0.05), respectively. The positional change of the upper central incisors presented a mean of -0.23 ±â€Š0.1 mm (p> 0.05) and 2.65 ±â€Š1.1° (p< 0.05). Upper first molar intrusion was statistically significant, with a mean of 0.88 ±â€Š0.2 mm (p< 0.05). Upper right and left first molars rotation towards palatal midline presented mean of 4.1 ±â€Š0.19° (p< 0.05) and 3.4  ±â€Š0.1° (p< 0.05), respectively. Additionally, the distance between upper right and left first molars increased significantly, with a mean of 2.54 ±â€Š0.01 mm (p< 0.05). CONCLUSION: The study successfully demonstrated the efficiency of molar distalization without anchorage loss using a customized distalizer anchored on palatal miniscrews.