Pharmacokinetics and Bioequivalence Evaluation of 2 Olmesartan Medoxomil and Amlodipine Besylate Fixed-Dose Combination Tablets in Healthy Chinese Volunteers Under Fasting and Fed Conditions.

Combined antihypertensive drugs have become the basic method of treating hypertension. Olmesartan and amlodipine, as representative drugs of angiotensin receptor blockers and calcium channel blockers, were developed as a compound formulation for antihypertensive treatment. The purpose of this study was to evaluate the bioequivalence of olmesartan medoxomil/amlodipine besylate tablet (20 mg/5 mg) under fasting and fed conditions in healthy Chinese volunteers. A phase 1 randomized, open-label, 2-period, single-dose crossover study (n = 56) was designed, with subjects under fasting (n = 28) or fed (n = 28) conditions. Of the 56 enrolled participants, 55 healthy volunteers completed the study. Blood samples for pharmacokinetic analysis were collected from 1.5 hours before dosing to 168 hours after dosing. The 90%CIs for the geometric mean ratios of maximum plasma drug concentration, area under the plasma concentration-time curve (AUC) from time 0 to the last measurable concentration and AUC from time 0 to infinity of the test/reference were all within the acceptance range for bioequivalence (80%-125%). The data showed that the absorption of amlodipine is not affected by food, but the exposure of olmesartan (both AUC from time 0 to the last measurable concentration and AUC from time 0 to infinity were P < .05) reduced significantly after consuming a high-fat meal, which indicates that the effects of food on olmesartan exposure in healthy Chinese were clinically relevant. During the study, there were no suspected serious adverse reactions or serious adverse events. All adverse events were determined to be mild after Common Terminology Criteria for Adverse Events 5.0 evaluation. These results indicated that both the test and reference formulations were bioequivalent with similar safety profiles.

Bioavailability Enhancement of Olmesartan Medoxomil Using Hot-Melt Extrusion: In-Silico, In-Vitro, and In-Vivo Evaluation.

Olmesartan medoxomil (OLM) an antihypertensive molecule with poor solubility and poor bioavailability (26% when taken orally) was selected as a model drug. Herein, rationale development of amorphous solid dispersion with hot-melt extrusion of poorly bioavailable OLM was carried out with the aid of quality by design (QbD), in-silico, in-vitro, and in-vivo evaluations. Polymer selection commenced with the selection of thermoplastic water-soluble polymers with the compatible processing temperature window as per the thermal behavior of OLM. Molecular dynamics (MD) simulations as well assisted in the selection of a carrier. Promising dissolution enhancement was observed with the help of Kollidon VA-64 (VA-64) as a carrier. Optimization of the formulation was executed using the QbD approach with design of experiment as a statistical optimization tool. Interactions between VA-64 and OLM on the atomic level were studied with the help of atomistic MD simulations. Characterization of the optimized extrudates were carried out with scanning electron microscopy, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis, Fourier transforms infrared spectroscopy, powder X-ray diffraction, in-vitro dissolution study, and in-vivo pharmacokinetic studies. Molecular-level mixing of OLM with VA-64 resulted into glass solution formation which rapidly dissolves (28 times in-vitro dissolution enhancement) in GI tract fluids and instantly gets absorbed into blood circulation. In-vivo pharmacokinetic studies performed in Sprague-Dawley rats reflected superior bioavailability (201.60%) with a significant increase in the Cmax with short Tmax through amorphization of OLM. The in-silico results were in agreement with the observed results of in-vitro dissolution studies and in-vivo pharmacokinetic study.

Tailoring of PEGylated bilosomes for promoting the transdermal delivery of olmesartan medoxomil: in-vitro characterization, ex-vivo permeation and in-vivo assessment.

INTRODUCTION: The intention of this work was to load olmesartan medoxomil (OLM), a sparsely water soluble antihypertensive bioactive with low oral bioavailability (26%), into PEGylated bilosomes (PBs) for augmenting its transdermal delivery. PBs contain PEGylated single chain edge activator besides the components of traditional bilosomes (Span 60, cholesterol and bile salts). The PEG gives further resilience to vesicle membrane and is speculated to augment both permeability and bioavailability of OLM. METHODS: A 24 factorial experiment was constructed to inspect the impact of diverse variables on vesicles' features and sort out the optimal formula adopting Design Expert® software utilizing thin film hydration technique. Vesicles' evaluation was done by finding out entrapment efficiency percent (EE%), particle size (PS), polydispersity index (PDI), zeta potential (ZP) and amount of drug released after 6 hrs (Q6h). The optimal formula was selected and characterized for further investigations. RESULTS: The optimal formula (PB15) showed spherical vesicles with EE% of 72.49±0.38%, PS of 559.30±10.70 nm, PDI of 0.57±0.15, ZP of -38.35±0.65 mV and Q6h of 59.60±0.24%. PB15 showed higher deformability index (28.39±5.71 g) compared to traditional bilosomes (5.88±0.90 g) and transethosomes (14.94±0.63 g). Further, PB15 showed superior skin permeation from rat's skin relative to the drug suspension. Moreover, confocal laser scanning microscopy examination revealed efficient penetration of the fluoro-labeled PB15 through skin. Histopathological study ensured the safety of PB15. In addition, in-vivo skin deposition studies showed higher OLM deposition in rat's skin from PB15 compared to transethosomes and OLM suspension. Furthermore, pharmacodynamic and pharmacokinetic studies performed using male Wistar rats and male Albino rabbits, respectively, showed the superiority of PB15 over oral tablets. PB15 was found to have significantly higher AUC0-48 and AUC0-∞ relative to the oral tablets. As well, the relative bioavailability of PB15 was found to be 235.04%. CONCLUSION: Overall, the obtained results confirmed the creditable effect of PB15 for transdermal delivery.

In Vitro and In Vivo Evaluation of Olmesartan Medoxomil Microcrysta ls and Nanocrystals: Preparation, Characterization, and Pharmacokinet ic Comparison in Beagle Dogs.

BACKGROUND: Olmesartan medoxomil (OLM) is a promising prodrug hydrolyzed to olmesartan (OL) during absorption from the gastrointestinal tract. OL is a selective angiotensin II receptor antagonist, with high drug resistance and low drug interaction. However, OLM has low solubility and low bioavailability. Therefore, it is extremely urgent to reduce the drug particle size to improve its biological bioavailability. OBJECTIVE: The aim of the study was to improve the oral bioavailability of poorly water-soluble olmesartan medoxomil (OLM) by using different particle size-reduction strategies. METHOD: Raw drug material was micronized or nanosized by either jet or wet milling processes, respectively. The particle sizes of the prepared nanocrystals (100-300 nm) and microcrystals (0.5-16 µm) were characterized by DLS, SEM, and TEM techniques. Solid state characterization by XPRD and DSC was used to confirm the crystalline state of OLM after the milling processes. RESULTS: We demonstrated that OLM nanocrystals enhanced solubility and dissolution in the non-sink condition in which high sensitivity was found in purified water. After 1 h, 65.4% of OLM was dissolved from nanocrystals, while microcrystals and OLMETEC® only showed 37.8% and 31.9% of drug dissolution, respectively. In the pharmacokinetic study using Beagle dogs, an increase in Cmax (～2 fold) and AUC (～1.6 fold) was observed after oral administration of OLM nanocrystals when compared to microcrystals and reference tablets, OLMETEC®. In contrast, OLM microcrystals failed to improve the oral bioavailability of the drugs. CONCLUSION: Particles size reduction to nano-scale by means of nanocrystals technology significantly increased in vitro dissolution rate and in vivo oral bioavailability of OLM.

Use of transethosomes for enhancing the transdermal delivery of olmesartan medoxomil: in vitro, ex vivo, and in vivo evaluation.

INTRODUCTION AND AIM: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability due to extensive first-pass metabolism. This study aimed to prepare transetho somes (TEs) for enhancing the transdermal delivery of OLM to avoid its oral problems. METHODS: TE formulae were prepared utilizing 51.31 full factorial design using various surfactants (SAAs) and different phospholipid-to-SAA ratios. The formulae were characterized regarding their entrapment efficiency percentage (EE%), particle size (PS), polydispersity index (PDI), zeta potential (ZP), and the amount of drug released after 6 hours (Q6h). Design Expert® software was employed to select the optimum formula. RESULTS: The optimum formula (TE14) had an EE% of 58.50%±1.30%, PS of 222.60±2.50 nm, PDI of 0.11±0.06, ZP of -20.80±0.30 mV, and Q6h of 67.40%±0.20%. In addition, TE14 was compared to transferosomes (TFs) in terms of elasticity and was found to show higher deformability index. Further, evaluation of ex vivo permeation using both rat and shed snake skin showed higher permeability of TE14 compared to TFs and OLM suspension. Confocal laser scanning microscopy confirmed the capability of the fluorolabeled TE14 to penetrate deep within the skin, while the histopathological study confirmed its safety. TE14 successfully maintained normal blood pressure values of rats up to 24 hours. Moreover, TE14 showed superiority in dermatokinetic study when compared with drug suspension. CONCLUSION: Taken together, the obtained results confirmed the potential of employing TEs as a successful carrier for the transdermal delivery of OLM.

¿Conocemos todas las interacciones farmacológicas?: el transportador OATP1B1 / Do we know all the pharmacological interactions? The OATP1B1 transporter

En ancianos es frecuente la polimedicación. Esto incrementa el riesgo de sufrir reacciones adversas a los medicamentos, y también el riesgo de sufrir interacciones que pueden ser relevantes. Las interacciones más frecuentes son las que afectan a la farmacocinética de los medicamentos y, especialmente, al metabolismo de estos. Aquí el citocromo P450 tiene mucha relevancia, pero desde hace poco más de una década se conoce otro mecanismo implicado, las proteínas transportadoras de membrana. Dentro de estas tienen especial relevancia las OATP (Organic anion transporting polypeptide) de las que existen diferentes tipos y ubicaciones. La competición de diferentes substratos por estas proteínas puede generar interacciones que acaban repercutiendo en el tratamiento farmacoterapeutico del paciente

In the elderly, polymedication is frequent. This increases the risk of adverse reactions to medications, and also the risk of interactions that may be relevant. The most frequent interactions are those that affect the pharmacokinetics of drugs and, especially, their metabolism. Here the cytochrome P450 has a lot of relevance, but for a little more than a decade we know another mechanism involved, the membrane transporter proteins. Within these are the OATP (Organic anion transporting polypeptide) of which there are different types and locations. The competition of different substrates for these proteins can generate interactions that end up having an impact on the pharmacotherapeutic treatment of the patient

Nanocolloidal lipidic carriers of olmesartan medoxomil surface-tailored with Concavalin-A for lectin receptor targeting.

AIM: The present work involves the development of Concavalin A-conjugated nanostructured lipidic carriers (NLCs) of olmesartan medoxomil for lectin receptor targeting. MATERIALS & METHODS: Excipient selection was performed by drug solubility in solid and liquid lipids. Factor screening was carried out by evaluating the impact of formulation and process variables on the critical quality attributes. Surface modification of NLCs was carried out using Concavalin A and extensively characterized. RESULTS & CONCLUSION: NLCs exhibited the particle size of 273.6 nm, Î¶-potential of -30.2 nm, encapsulation efficiency of 73.3% and sustained drug release profile. Nearly 4.2-fold improvement in cell uptake, four- to eightfold increase in Cmax and AUC, and 37% reduction in blood pressure was observed from NLCs over the pure drug.

Fabrication of Nanosuspension Directly Loaded Fast-Dissolving Films for Enhanced Oral Bioavailability of Olmesartan Medoxomil: In Vitro Characterization and Pharmacokinetic Evaluation in Healthy Human Volunteers.

Olmesartan medoxomil (OM) is an antihypertensive drug with poor water solubility and low oral bioavailability (28.6%). Accordingly, this study aimed to formulate and evaluate OM nanosuspension incorporated into oral fast-dissolving films (FDFs) for bioavailability enhancement. OM nanosuspension was prepared by antisolvent-precipitation-ultrasonication method and characterized regarding particle size (122.67 ± 5.03 nm), span value (1.40 ± 0.51), and zeta potential (- 46.56 ± 1.20 mV). Transmission electron microscopy (TEM) of the nanosuspension showed spherical non-aggregating nanoparticles. The nanosuspension was then directly loaded into FDFs by solvent casting technique. A full factorial design (22 × 31) was implemented for optimization of the FDFs using Design-Expert® software. Physical and mechanical characteristics in addition to dissolution profiles of the FDFs were investigated. The optimum formula (FDF1) showed 0.43 ± 0.02 kg/mm2 tensile strength, 20.50 ± 2.12 s disintegration time, and 87.53 ± 2.50 and 95.99 ± 0.25% OM dissolved after 6 and 10 min, respectively. Accelerated and long-term shelf stability studies confirmed the stability of FDF1. More than 75% OM was dissolved within 10 min from FDF1 compared with 9.80 and 47.80% for films prepared using coarse drug powder and market tablet, respectively. Relative bioavailability of FDF1 compared to market tablet was assessed in healthy human volunteers. The Cmax value increased significantly from 66.62 ± 14.95 to 179.28 ± 23.96 ng/mL for market tablet and FDF1, respectively. Similarly, the AUC0-72 value significantly increased from 498.36 ± 217.46 to 1083.67 ± 246.32 ng h/mL for market tablet and FDF1, respectively. Relative bioavailability of FDF1 was 209.28%. The highlighted results verified the effectiveness of OM nanosuspension-loaded FDFs in improving OM bioavailability.

Solid lipid nanoparticles as an efficient drug delivery system of olmesartan medoxomil for the treatment of hypertension.

The aim of the current investigation was to develop solid lipid nanoparticles of olmesartan medoxomil using hot homogenization method to improve its oral bioavailability. Central composite design was applied to optimize the formulation variables; lipid X1 (Glyceryl monostearate) and surfactant X2 (Poloxamer: Tween 80). The particle sizes were in the nanometer range and spherical shaped for all prepared solid lipid nanoparticles formulations and the zeta potential absolute values were high, predicting good long-term stability. In vitro study of olmesartan loaded solid lipid nanoparticle exhibited controlled release profile for at least 24 h. The rate and extent of drug diffusion was studied using dialysis sac, rat's stomach and intestine tissues; study demonstrated that drug release from the solid lipid nanoparticles was significantly higher than drug suspension. In vivo pharmacokinetic study of olmesartan loaded solid lipid nanoparticles revealed higher Cmax of 1610 ng/mL, higher AUC of 15492.50 ng/mL and increased relative bioavailability by almost 2.3 folds compared to marketed formulation. These results clearly indicate that olmesartan loaded solid lipid nanoparticles are shown to have enhanced bioavailability and effective therapeutic result and thus would be an excellent way to treat hypertension. Hence, these solid lipid nanoparticles could represent as a great potential for a possible alternative to conventional oral formulation in the treatment of hypertension.

Bioequivalence Study of a New Fixed-dose Combination Tablet Containing S-Amlodipine Nicotinate and Olmesartan Medoxomil in Healthy Korean Male Subjects.

PURPOSE: A fixed-dose combination (FDC) pill of amlodipine (relatively old calcium channel blocker as dihydropyridine) and olmesartan (relatively new angiotensin II receptor blocker) is used for hypertension that is not adequately controlled with a single-formulation drug. Because the FDC is a one-pill formulation, and amlodipine and olmesartan have different mechanisms of action, it is expected to improve patients' medication compliance and have an increased blood pressure-lowering efficacy. The purpose of this study was to assess the safety profile and the bioequivalence of two different FDC formulations [amlodipine besylate/olmesartan medoxomil 10/40 mg (reference product) and S-amlodipine nicotinate/olmesartan medoxomil 5/40 mg (test product)]. METHODS: A randomized, open-label, single-dose, 2-treatment, 2-way, and 2-period crossover study, including a 3-week washout period, was performed in 32 healthy Korean male volunteers. To analyze the concentration of S-amlodipine or olmesartan, plasma samples were collected up to 144 hours after the dose for S-amlodipine and 48 hours after the dose for olmesartan. Pharmacokinetic parameters, including the Cmax and the area under the curve from time 0 to the last measurable concentration (AUC0-last) for the time versus concentration plot, were calculated. Analysis of variance for bioequivalence was conducted using Cmax and AUC0-last converted to log scale, and the mean ratios and 90% CIs were determined. Safety data included analysis of adverse events (AEs), vital signs, physical examinations, clinical laboratory test, and 12-lead ECGs. FINDINGS: Of the 32 enrolled participants, 29 healthy volunteers completed the study. For both S-amlodipine and olmesartan, the main pharmacokinetic parameters were all within the acceptable range for regulatory bioequivalence. The 90% CIs for the geometric mean ratios of Cmax and AUC0-last were 0.8766 to 0.9760 and 0.8288 to 0.9224, respectively, for S-amlodipine and 0.9097 to 1.1229 and 0.8904 to 1.0407, respectively, for olmesartan. Hypotension was the most frequent AE, and it was observed in 4 volunteers with the test product and 7 volunteers with the reference product. Both the test and reference formulations were well tolerated. IMPLICATIONS: The present study demonstrates that the newly developed FDC product (test drug) and the conventional FDC product (reference drug) have comparable pharmacokinetic characteristics in healthy adult male volunteers. Both the test and reference products indicated good tolerance in this population, and no serious AEs were observed.

Nanostructured lipid carriers of olmesartan medoxomil with enhanced oral bioavailability.

The current study explores the potential of nanostructured lipid carriers (NLCs) for oral bioavailability enhancement of olmesartan medoxomil (OLM) by systemic design approach. OLM-NLC was successfully prepared with optimized process parameters (i.e. amount of liquid lipid, total amount of lipid, drug content and surfactant concentration) using the Box-Behnken design of experiments for different response parameters (i.e. particle size, Polydispersity index and entrapment efficiency). Further, optimized formulation was validated which depicted nano size, homogenous distribution with optimum entrapment efficiency. OLM-NLC was characterized by different techniques viz. differential scanning calorimetry (DSC), powder X-Ray diffraction (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which showed reduced crystallinity of the drug with smooth spherical appearance of nanoparticles. Formulation was found to be stable in simulated gastric fluids as no significant changes were found in size, PDI and entrapment efficiency. In vitro release showed extended release of OLM from OLM-NLC. In vitro cellular uptake study revealed 5.2 folds higher uptake of nanoparticles as compare to the free drug, when incubated with Caco-2 cells. In vivo performance showed that AUCtotal and Cmax of OLM-NLC were found significantly (P<0.01) higher as compare to the free drug. Overall, the present study successfully reports the improvement of oral bioavailability of olmesartan medoxomil.

Formulation, optimization, and in vitro-in vivo evaluation of olmesartan medoxomil nanocrystals.

The aim of the present study is to increase the saturation solubility and oral bioavailability of olmesartan medoxomil (OLM) using nano-sized crystals produced using a combination of antisolvent precipitation and high-shear homogenization. A response surface design comprising 46 runs was used to optimize the OLM nanocrystal formulation. The optimized formulation was produced using a combination of D-alpha tocopheryl polyethylene glycol 1000 succinate (TPGS) (0.7% w/v), Pluronic F-68® (0.5% w/v), and drug concentration (0.2% w/v) and subjected to 10 and 15 homogenization cycles at 1000 and 1700 bar, respectively. The particle size, polydispersity index (PDI), and zeta potential of optimized formulation were found to be 140 ± 10.34 nm, 0.07 ± 0.016, and -21.43 ± 2.33 mV, respectively. The optimized formulation exhibited irregular morphology as evaluated by scanning electron microscopy and was crystalline as determined by thermal analysis and powder X-ray diffraction studies. OLM nanocrystals showed a marked increase in the saturation solubility as well as rapid dissolution rate in comparison with the pure drug. No significant change in the particle size, PDI, and zeta potential was observed when optimized formulation was stored at room and refrigeration conditions for 3 months. Lastly, in vivo pharmacokinetic studies in Sprague-Dawley rats substantiate the ability of OLM nanocrystal formulation to significantly improve (∼4.6-fold) the oral bioavailability of OLM in comparison with the free drug. This study has established a potential and commercial viable OLM formulation with enhanced saturation solubility and in vivo oral bioavailability.

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation, optimization and in vivo evaluation.

OBJECTIVE: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery. MATERIALS AND METHODS: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug-excipients interactions, powder X-ray diffraction analysis and drug release in vitro. RESULTS AND DISCUSSION: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100 nm, PDI 0.291, zeta potential of -23.4 mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration. CONCLUSION: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.

Population Pharmacokinetic Modeling of Olmesartan, the Active Metabolite of Olmesartan Medoxomil, in Patients with Hypertension.

BACKGROUND: Olmesartan medoxomil is an orally given angiotensin II receptor antagonist indicated for the treatment of hypertension. OBJECTIVE: The aim of the study was to establish a population pharmacokinetic model for olmesartan, the active metabolite of olmesartan medoxomil, in Indian hypertensive patients, and to evaluate effects of covariates on the volume of distribution (V/F) and oral clearance (CL/F) of olmesartan. METHODS: The population pharmacokinetic model for olmesartan was developed using Phoenix NLME 1.3 with a non-linear mixed-effect model. Bootstrap and visual predictive check were used simultaneously to validate the final population pharmacokinetic models. The covariates included age, sex, body surface area (BSA), bodyweight, height, creatinine clearance (CLCR) as an index of renal function and liver parameters as indices of hepatic function. RESULTS: A total of 205 olmesartan plasma sample concentrations from 69 patients with hypertension were collected in this study. The pharmacokinetic data of olmesartan was well described by a two-compartment linear pharmacokinetic model with first-order absorption and an absorption lag-time. The mean values of CL/F and V/F of olmesartan in the patients were 0.31565 L/h and 44.5162 L, respectively. Analysis of covariates showed that age and CLCR were factors influencing the clearance of olmesartan and the volume of distribution of olmesartan was dependent on age and BSA. CONCLUSION: The final population pharmacokinetic model was demonstrated to be appropriate and effective and it can be used to assess the pharmacokinetic parameters of olmesartan in Indian patients with hypertension.

In vitro and in vivo effects of morin on the intestinal absorption and pharmacokinetics of olmesartan medoxomil solid dispersions.

PURPOSE: In-situ evaluation to corroborate morin effects on the intestinal absorption and pharmacokinetic behavior of freeze-dried OLM-loaded solid dispersions with Caco-2 and in-vivo studies Methods: Intestinal transport and absorption studies were examined by Caco-2 permeability, in-situ single pass perfusion and closed-loop models along with in-vivo pharmacokinetic studies to evaluate and confirm the effect of P-gp-mediated activity of morin. We evaluated the intestinal membrane damage in the presence of morin by measuring the release of protein and lactate dehydrogenase (LDH) followed by using qualitative and quantitative morphometric analysis to describe the surface characteristics of intestinal epithelium. RESULTS: Morin showed the highest Peff value 13.8 ± 0.34 × 10-6 cm/s in jejunum than ileum (p < .01) at 100 µM with absorption enhancement of 1.31-fold together with enhanced (p < .01) secretory transport of 6.27 ± 0.27 × 10 -6 cm/s in Caco-2 monolayer cells. Our findings noticed 2.37 (in-situ); 2.39 (in-vivo) and 1.43 (in-situ); 1.36 (in-vivo) fold increase in AUC0-t with elevated Cmax and shortened Tmax for freeze-dried solid dispersion in the presence of morin as compared to pure OLM and freeze-dried solid dispersions without morin, respectively. CONCLUSIONS: Our study demonstrated that increased solubilization through freeze-dried OLM-loaded solid dispersion together with efflux inhibition improved intestinal permeability to one system that might lead to novel solubilization and efflux pump inhibition as a novel alternative potential to increase oral absorption and bioavailability of OLM.

Comparative biodistribution and safety profiling of olmesartan medoxomil oil-in-water oral nanoemulsion.

Poor aqueous solubility and unfavourable de-esterification of olmesartan medoxomil (a selective angiotensin II receptor blocker), results in low oral bioavailability of less than 26%. Improvement of oral bioavailability with prolonged pharmacodynamics activity of olmesartan in Wistar rats had been approached by nanoemulsification strategy in our previous article [Colloid Surface B, 115, 2014: 286]. In continuation to that work, we herewith report the biodistribution behaviour and 28-day repeated dose sub-chronic toxicity of olmesartan medoxomil nanoemulsion in Wistar rats following oral administration. The levels of olmesartan in collected biological samples were estimated using our validated LC-MS/MS technique. Our biodistribution study showed significantly higher brain concentrations of olmesartan (0.290 ± 0.089 µg/mL, 0.333 ± 0.071 µg/mL and 0.217 ± 0.062 µg/mL at 0.5, 2.0 and 8.0 h post dosing, respectively) when administered orally as nanoemulsion formulation as compared to the aqueous suspension. In addition, the olmesartan nanoemulsion was found to be safe and non-toxic, as it neither produced any lethality nor remarkable haematological, biochemical and structural adverse effects as observed during the 28-days sub-chronic toxicity studies in experimental Wistar rats. It is herewith envisaged that the developed nanoemulsion formulation approach for the delivery of olmesartan medoxomil via oral route can further be explored in memory dysfunction and brain ischemia, for better brain penetration and improved clinical application in stroke patients.

COMPARATIVE BIOAVAILABILITY OF A FIXED-DOSE COMBINATION TABLET OF OLMESARTAN MEDOXOMIL/HYDROCHLOROTHIAZIDE IN HEALTHY KOREAN VOLUNTEERS.

Combination therapy with diuretics and angiotensin II type 1 (AT1) receptor antagonist is frequently recommended for the control of blood pressure in hypertensive patients. This study was targeted to compare pharmacokinetic profiles of a new generic fixed-dose combination (FDC) tablet of olmesartan medoxomil/hydrochlorothiazide 20/12.5 mg and a reference formulation of Olmetec Plus 20/12.5 mg tablets in healthy volunteers. The study design was a randomized sequence and two-way crossover study in healthy subjects. They were to be randomly assigned to either one of the two sequence groups; each subject sequentially received a single oral dose of reference and test tablet with 7-day washout period. Blood sample was collected at pre-dose and at 0.33, 0.67, 1, 1.33, 1.67, 2, 2.5, 3, 4, 6, 8, 12, 24, 36 and 48 h post-dose. The blood concentrations were analyzed by LC-MS/MS. Both of the 90% CI for the treatment ratios (test/reference) of C(max) and AUC(last) were to be in the range of 0.800-1.250 with regards to olmesartan medoxomil and hydrochlorothiazide; the geometric mean ratios (test/reference) for olmesartan C(max) and AUC(last) were 0.979 (90% CI, 0.934-1.027) and 0.992 (0.946-1.041), respectively, and those for hydrochlorothiazide C(max) and AUC(last) were 0.966 (0.975-1.110) and 0.999 (0.963-1.038), respectively. No serious adverse events were reported during the study. The generic formulation of olmesartan medoxomil/hydrochlorothiazide 20/12.5 mg tablet was bioequivalent with the reference formulation of Olmetec Plus 20/12.5 mg tablet in regards to the pharmacokinetic parameters of olmesartan medoxomil and hydrochlorothiazide. Clinical Research Information Service (CRIS) Registration Number: KCT0001025. (https://cris.nih.go.kr/ Mar 18, 2014)

Design, formulation and optimization of novel soft nano-carriers for transdermal olmesartan medoxomil delivery: In vitro characterization and in vivo pharmacokinetic assessment.

Olmesartan is a hydrophobic antihypertensive drug with a short biological half-life, and low bioavailability, presents a challenge with respect to its oral administration. The objective of the work was to formulate, optimize and evaluate the transdermal potential of novel vesicular nano-invasomes, containing above anti-hypertensive agent. To achieve the above purpose, soft carriers (viz. nano-invasomes) of olmesartan with ß-citronellene as potential permeation enhancer were developed and optimized using Box-Behnken design. The physicochemical characteristics e.g., vesicle size, shape, entrapment efficiency and skin permeability of the nano-invasomes formulations were evaluated. The optimized formulation was further evaluated for in vitro drug release, confocal microscopy and in vivo pharmacokinetic study. The optimum nano-invasomes formulation showed vesicles size of 83.35±3.25nm, entrapment efficiency of 65.21±2.25% and transdermal flux of 32.78±0.703 (µg/cm(2)/h) which were found in agreement with the predicted value generated by Box-Behnken design. Confocal laser microscopy of rat skin showed that optimized formulation was eventually distributed and permeated deep into the skin. The pharmacokinetic study presented that transdermal nano-invasomes formulation showed 1.15 times improvement in bioavailability of olmesartan with respect to the control formulation in Wistar rats. It was concluded that the response surfaces estimated by Design Expert(®) illustrated obvious relationship between formulation factors and response variables and nano-invasomes were found to be a proficient carrier system for transdermal delivery of olmesartan.

Positively charged self-nanoemulsifying oily formulations of olmesartan medoxomil: Systematic development, in vitro, ex vivo and in vivo evaluation.

The current research work explores the potential applications of cationic self-nanoemulsifying oily formulations (CSNEOFs) for enhancing the oral bioavailability of olmesartan medoxomil. Initial preformulation studies, risk assessment and factor screening studies revealed selection of oleic acid, Tween 40 and Transcutol HP as the critical factors. Systematic optimization of SNEOFs was carried out employing D-optimal mixture design and evaluating them for responses viz. emulsification efficiency, globule size and in vitro drug release. The CSNEOFs were prepared from the optimized SNEOFs by adding oleylamine as cationic charge inducer. In vitro cell line studies revealed markedly better drug uptake along with safer and biocompatible nature of CSNEOFs than free drug suspension. In situ perfusion, and in vivo pharmacokinetic and pharmacodynamic studies in Wistar rats revealed significant improvement in the biopharmaceutical performance of the drug from CSNEOFs and SNEOFs vis-à-vis the marketed formulation. Successful establishment of various levels of in vitro/in vivo correlations (IVIVC) substantiated high degree of prognostic ability of in vitro dissolution conditions in predicting the in vivo performance. In a nutshell, the present studies report successful development of CSNEOFs of olmesartan medoxomil with distinctly improved biopharmaceutical performance.