Decay of the water reed Phragmites communis caused by the white-rot fungus Phlebia tremellosa and the influence of some environmental factors.

The strain Phlebia tremellosa SBUG 1630 isolated from a thatched roof in Northern Germany is capable of colonizing and degrading effectively the water reed Phragmites communis. Within 96 h after inoculation, mycelia covered both the outer and the inner surface of reed shoot fragments as observed by scanning electron microscopy. Interestingly, top culm sections and culm edges were particularly susceptible towards fungal degradation. The weight loss of culms reached 20-73% depending on the environmental conditions applied during the incubation of 70 days. Reed degradation was stable at pH 4 to pH 8 and optimal between 25 and 30 °C. Short-term incubation at elevated temperatures (37 to 55 °C) affected the fungal reed degradation to only a minor extent, whereas > 18 h at 55 °C completely inhibited fungal growth and reed degradation. Supplementation with 43 mM NH4Cl enhanced the reed degradation up to 9%. In contrast, the addition of diammonium tartrate increased the weight loss of the samples considerably up to 16% at 344 mM. Furthermore, reed degradation by P. tremellosa was increased by supplementing the test medium with Mn (99 to 1584 µM), Cu (150 to 300 µM), and less significantly phosphate (4 mM), Zn (37 to 74 µM), and Ag (76 µM) after 70 days. In addition, activities of the ligninolytic enzymes laccase (max. 27.4 nmol ml-1 min-1) and lignin peroxidase (max. 22.8 nmol ml-1 min-1) were rather low in nitrogen-limited medium, whereas considerably higher levels of manganese peroxidase (max. 635.9 nmol ml-1 min-1) were observed.

Removal of methylene blue from aqueous solution by Artist's Bracket fungi: kinetic and equilibrium studies.

In this study, adsorption of methylene blue (MB) dye onto Artist's Bracket (AB) fungi was investigated in aqueous solution. Fourier transform infrared and scanning electron microscopy were used to investigate surface characteristic of AB fungi. Influence of operational parameters such as pH, contact time, biosorbent dosage, dye concentration, inorganic salts and temperature was studied on dye removal efficiency. With the increase of pH from 3 to 9, removal efficiency increased from 74.0% to 90.4%. Also, it reduced from 99.8% to 81.8% with increasing initial MB concentration from 25 mg L(-1) to 100 mg L(-1), whereas it increased from 54.7% to 98.7% and from 98.5% to 99.9% with increasing biosorbent dosage from 0.5 g L(-1) to 2 g L(-1) and with increasing temperature from 25 °C to 50 °C, respectively. Isotherm studies have shown adsorption of MB dye over the AB fungi had a better coefficient of determination (R(2)) of 0.98 for Langmuir isotherm. In addition, the maximum monolayer adsorption capacity (qm) was 100 mg g(-1). Also, the MB dye adsorption process followed pseudo-second-order kinetic. In general, AB fungi particles can be favorable for removal of MB dye from dye aqueous solution with natural pH and high temperature.

Visualization of the mycelia of wood-rotting fungi by fluorescence in situ hybridization using a peptide nucleic acid probe.

White rot fungus, Phanerochaete chrysosporium, and brown rot fungus, Postia placenta, grown on agar plates, were visualized by fluorescence in situ hybridization (FISH) using a peptide nucleic acid (PNA) probe. Mycelia grown on wood chips were also clearly detected by PNA-FISH following blocking treatment. To the best of our knowledge, this is the first report on the visualization of fungi in wood by FISH.

A new species of Hyphoderma (Meruliaceae, Polyporales) and its discrimination from closely related taxa.

Thirty-five corticioid collections from the Canary Islands and Azores Archipelago were examined morphologically and subjected to molecular phylogenetic analysis. These specimens, almost all collected on endemic and/or xerophilic vegetation, were similar in morphological and ecological characteristics to Hypochnicium prosopidis from the Sonoran Desert (Arizona, USA) and Hyphoderma amoenum. Thirty-seven new ITS nrDNA sequences from these specimens, including the nomenclatural type of the above-mentioned species, were obtained and aligned with homologous sequences from GenBank. These collections were distributed in two strongly supported monophyletic clades. However, similar patterns of morphological variability shared by specimens included in both clades and their differences with related species suggest that they should be described as a single new species. Therefore Hyphoderma macaronesicum is proposed. Studies will be required to test, in a more robust multilocus genealogical framework, whether these populations constitute two cryptic species or whether they are the same taxon. The position of Hypochnicium prosopidis in the resolved tree and its morphological characters suggest that it should be included in Hyphoderma and the new combination Hyphoderma prosopidis is proposed.

Termite-egg mimicry by a sclerotium-forming fungus.

Mimicry has evolved in a wide range of organisms and encompasses diverse tactics for defence, foraging, pollination and social parasitism. Here, I report an extraordinary case of egg mimicry by a fungus, whereby the fungus gains competitor-free habitat in termite nests. Brown fungal balls, called 'termite balls', are frequently found in egg piles of Reticulitermes termites. Phylogenetic analysis illustrated that termite-ball fungi isolated from different hosts (Reticulitermes speratus, Reticulitermes flavipes and Reticulitermes virginicus) were all very similar, with no significant molecular differences among host species or geographical locations. I found no significant effect of termite balls on egg survivorship. The termite-ball fungus rarely kills termite eggs in natural colonies. Even a termite species (Reticulitermes okinawanus) with no natural association with the fungus tended termite balls along with its eggs when it was experimentally provided with termite balls. Dummy-egg bioassays using glass beads showed that both morphological and chemical camouflage were necessary to induce tending by termites. Termites almost exclusively tended termite balls with diameters that exactly matched their egg size. Moreover, scanning electron microscopic observations revealed sophisticated mimicry of the smooth surface texture of eggs. These results provide clear evidence that this interaction is beneficial only for the fungus, i.e. termite balls parasitically mimic termite eggs.

Microbial scission of sulfide linkages in vulcanized natural rubber by a white rot basidiomycete, Ceriporiopsis subvermispora.

A white rot basidiomycete, Ceriporiopsis subvermispora, degraded vulcanized natural rubber (NR) sheets on a wood medium. The fungus decreased the total sulfur content of the rubber by 29% in 200 days, accompanied by the cleavage of sulfide bonds between polyisoprene chains. X-ray photoelectron spectroscopy (XPS) demonstrated that C. subvermispora reduced the frequency of S-C bonds by 69% with a concomitant formation of S-O bonds during the culture period. Dipolar decoupling/magic angle spinning (DD/MAS) solid state 13C NMR revealed that the fungus preferentially decomposed monosulfide bonds linked to a cis- and trans-1,4-isoprene backbone but the cleavage of polysulfide bonds was also observed. In contrast, no decrease in weight or devulcanization of rubber was observed in cultures of a white rot fungus, Dichomitus squalens. The oxidative cleavage of sulfide bonds by C. subvermispora demonstrates that ligninolytic basidiomycetes are potential microbes for the biological devulcanization of rubber products.

Generation of nuclear hybrids overcoming the natural barrier of incompatibility: transfer of nuclei from Lentinula edodes into protoplasts of Coriolus versicolor.

Heterokaryotic nuclear hybrids overcoming the natural barriers of incompatibility have been studied in basidiomycetes. To produce these nuclear hybrids between incompatible mushrooms, which have several potent pharmacological effects, nuclear transfer was performed between Lentinula edodes and Coriolus versicolor. Nuclei from serine auxotrophs of Lentinula edodes, LE207 (Ser-) were transferred into the protoplasts of arginine auxotrophs of Coriolus versicolor, CV17 (Arg-), using 30% polyethylene glycol 4000 in 10 mM CaCl2-glycine solution (pH 8.0). Nuclear transfer progenies were selected by nutritional complementation on minimal media supplemented with 0.6 M sucrose. The progenies were classified based on colony morphology to L. edodes-like, C. versicolor-like and non-parental type. Most of the progenies grew slower than either parent. The number of nuclei per cell was similar but the DNA content varied between progenies. The isozyme patterns of nuclear hybrids resembled either of the parent profiles or showed a mixed profile.