RESUMEN
OBJECTIVE: To reveal need for prosthodontics in permanent teeth in children aged 8-18 years. MATERIALS AND METHODS: The study was performed in Khimki Dental Municipal Clinic. Dental examination and radiological studies were conducted in 97 primary patients aged 8-18 years. Indications for prosthodontics in permanent teeth were occlusal deterioration index more than 40% and crown decay of more than 50% in incisors and canines. Additional features were registered including DMFT index, the presence of extracted teeth and teeth after root canal treatment, as well and teeth with extensive restorations with resins and marginal seal quality. RESULTS: From 97 primary patients (27.8%) children needed prosthodontics in permanent teeth (in average 2.3±2.1 teeth): 1 tooth in 10 children, 2 teeth in 11 children, 3 teeth in 1 child, 4 teeth in 3 children and 4 teeth in 2 children. Mean DMFT was 8.1±4.5 teeth. Six children already had extracted permanent teeth (9 teeth in total). Half of the teeth (49.2%) which needed orthodontic treatment had history of root canal treatment while 46% needed primary or secondary endodontic treatment. Occlusal deterioration index was more than 40% in 41.3% of cases, more than 60% in 49.2% of teeth and more than 80% in 9.52% of teeth. From all the teeth restored with composite resins 41.7% had good marginal seal but 58.3% showed macroscopic signs of marginal leakage. CONCLUSION: Our study shows high percentage of adolescents having need for prosthodontics in permanent teeth and unjustified widening of indications for direct resin restorations in this group of patients.
Asunto(s)
Dentición Permanente , Humanos , Niño , Adolescente , Masculino , Femenino , Caries Dental/terapia , Caries Dental/epidemiología , Restauración Dental Permanente/estadística & datos numéricos , Restauración Dental Permanente/métodos , Tratamiento del Conducto Radicular/estadística & datos numéricos , Prostodoncia/métodos , Índice CPORESUMEN
Objectives: To explore the experience of and satisfaction with workplace-based assessment tools among dental postgraduate trainees. METHODS: The cross-sectional study was conducted from March to October 2022 at the Aga Khan University Hospital, Karachi, and comprised all Operative Dentistry, Prosthodontics and Orthodontics postgraduate trainees. A questionnaire with both open-ended and closed-ended questions was used to record the experiences and satisfaction level of the dental residents who had earlier been subjected to workplace-based assessment. Data was analysed using SPSS 20, while thematic analysis was used for open-ended questions. RESULTS: Of the 20 Subjects, 15(75%) were females. Also, 11(55%) participants had received prior training for workplacebased assessment. There were 16(80%) residents who were satisfied with workplace-based assessment tools in the dental residency programme, 15(75%) agreed that the tools improved their clinical skills and helped them identify their weak areas, all the 20(100%) participants said the feedback given to them was constructive, 18(90%) reported that they were allowed to put in their views. However, 7(35%) participants reported that being observed adversely affected their performance. CONCLUSIONS: Dental residents generally gave positive feedback related to workplace-based assessment tools in a clinical setting.
Asunto(s)
Competencia Clínica , Educación de Posgrado en Odontología , Internado y Residencia , Lugar de Trabajo , Humanos , Femenino , Masculino , Estudios Transversales , Evaluación Educacional/métodos , Pakistán , Satisfacción Personal , Encuestas y Cuestionarios , Adulto , Ortodoncia/educación , Operatoria Dental/educación , Prostodoncia/educaciónRESUMEN
BACKGROUND: The orchestration of jaw relations in edentulous scenarios poses a significant challenge, demanding acumen, and expertise from the clinician. A myriad of devices, substances, and methodologies are employed to gauge the transverse, vertical, and horizontal spectrums of jaw relations. Traditionally, a synthesis of assorted devices and techniques has been requisitioned to chronicle the spatial dynamics between the maxilla and mandible. Yet, the absence of a solitary apparatus capable of concurrently documenting the triad of jaw relations has been a notable lacuna in prosthodontic rehabilitation. PURPOSE: This discourse expounds on an innovative contrivance, termed the Precise Jaw Relation Recorder. This pioneering instrument is adept at capturing the tripartite jaw relation processes: the occlusal plane's alignment in parallelism to the ala-tragus line, the vertical dimension at repose, and the occlusion as well as the centric relation. The device's strategic utility lies in its ability to facilitate the creation of prostheses that are not only functionally superior but also aesthetically more pleasing. CONCLUSION: Its implementation is a stride toward refining the accuracy of prosthodontic outcomes, thereby elevating the standard of patient care in dental practice.
Asunto(s)
Prostodoncia , Humanos , Registro de la Relación Maxilomandibular/instrumentación , Registro de la Relación Maxilomandibular/métodos , Prostodoncia/métodos , Prostodoncia/instrumentación , Oclusión DentalRESUMEN
OBJECTIVES: To review the developments in intraoral scanner (IOS) technologies applied in implant prosthodontics, emphasizing their influence on the accuracy of digital impressions, occlusal registrations, and the fit of implant-supported restorations. DATA: A collection of published articles related to implant prosthodontics, the accuracy of digital impressions, occlusal registration, and the fit of implant-supported fixed restorations. SOURCES: Three search engines were selected: Medline/PubMed, EBSCO, and Cochrane. A manual search was also conducted. STUDY SELECTION: A literature search screened relevant databases and journals for studies on IOS applications in digital implant prosthodontic workflows from Dec 2018 to Dec 2023. Inclusion criteria encompassed randomized control trials, clinical trials, case series, and in vitro research focused on the use of IOS in digital implant prosthodontics. CONCLUSIONS: The increased utilization of digital dental technologies has led to significant integration of digital implant prosthodontic workflows into clinicians' clinical practice. Several variables affect the accuracy of digital impressions generated by IOS. Generally, the prevailing opinion in academic papers is that digital workflows are suitable for addressing short-span implant-supported restorations. However, when it comes to long-span defects, the accuracy of digital workflows is still a matter of debate. Digital bite registration is an integral part of the workflow. It depends mainly on the defect size and location, scan strategy, anatomical tooth variations, overbite and other factors. The overall fit of digitally prefabricated implant restorations comprises of proximal, occlusal contacts and how accurately the restoration connects with implants. Research methodologies need standardization for further validation. CLINICAL SIGNIFICANCE: In clinical practice, it is essential to have a thorough and up-to-date comprehension of various factors that can affect the accuracy of digital impressions and the fit of the final prosthesis in implant prosthodontics.
Asunto(s)
Diseño Asistido por Computadora , Técnica de Impresión Dental , Prótesis Dental de Soporte Implantado , Humanos , Implantes Dentales , Prostodoncia , Diseño de Prótesis Dental/métodos , Imagenología TridimensionalRESUMEN
Prosthodontics is a dental subspecialty that includes the preparation of dental prosthetics for missing or damaged teeth. It increasingly uses computer-assisted technologies for planning and preparing dental prosthetics. This study aims to present the findings from a systematic review of publications on artificial intelligence (AI) in prosthodontics to identify current trends and future opportunities. The review question was "What are the applications of AI in prosthodontics and how good is their performance in prosthodontics?" Electronic searching in the Web of Science, ScienceDirect, PubMed, and Cochrane Library was conducted. The search was limited to full text from January 2012 to January 2024. Quadas-2 was used for assessing quality and potential risk of bias for the selected studies. A total of 1925 studies were identified in the initial search. After removing the duplicates and applying exclusion criteria, a total of 30 studies were selected for this review. Results of the Quadas-2 assessment of included studies found that a total of 18.3% of studies were identified as low risk of bias studies, whereas 52.6% and 28.9% of included studies were identified as studies with high and unclear risk of bias, respectively. Although they are still developing, AI models have already shown promise in the areas of dental charting, tooth shade selection, automated restoration design, mapping the preparation finishing line, manufacturing casting optimization, predicting facial changes in patients wearing removable prostheses, and designing removable partial dentures.
Asunto(s)
Inteligencia Artificial , Prostodoncia , Inteligencia Artificial/tendencias , Humanos , Prostodoncia/métodos , Prostodoncia/tendencias , Prótesis DentalRESUMEN
As Penn Dental School prepares for its Commission on Dental Accreditation (CODA)-approved dual-certificate periodontics/prosthodontics program, this article looks back at the roots of these specialties at the university via the renowned Periodontics and Periodontal Prosthesis program co-founded byCompendium's founding editor Dr. D. Walter Cohen as seen through the eyes of one of its graduates. The article commends the program's impact on public health today.
Asunto(s)
Salud Bucal , Humanos , Periodoncia , Prostodoncia , Prótesis DentalRESUMEN
OBJECTIVES: Dental residents experience high stress in their demanding programs and gender-based harassment/discrimination can contribute to their stress. The objectives were to compare stress, satisfaction, experienced sexual harassment and observed discrimination of women in dental graduate programs with high, medium, and low percentages of women and to explore relationships between these constructs of interest. METHODS: Note that, 112 pediatric dentistry (PD), 44 prosthodontics, and 56 oral and maxillofacial surgery (OMS) residents responded to a survey. RESULTS: PD residents had the lowest personal life-related stress (4-point scale with 4 = very stressful: PD = 2.99/P = 3.67/OMS = 3.56; p < 0.001), faculty-related stress (2.68/3.66/3.03; p < 0.001), lack of confidence-related stress (2.79/3.31/2.96; p < 0.01) and academic stress (2.65/3.24/3.02; p < 0.001), while prosthodontics residents had the highest stress levels. The average frequency of experiencing sexual harassment was highest for OMS residents and lowest for PD residents (5-point scale with 1 = never: 1.15/2.62/2.74; p < 0.001). PD residents observed least and OMS residents most frequently that female residents were treated less positively by other residents because of their gender (1.59/2.57/3.00; p < 0.001). Prosthodontics residents had the lowest job satisfaction score (5-point scale with 1 = lowest satisfaction: 4.12/3.14/4.20; p < 0.001). The more frequently male and female residents experienced sexual harassment, the higher their personal life-related stress, faculty-related stress, lack of confidence-related stress, and academic stress, and the lower their career satisfaction, specialty content satisfaction, and stress-related satisfaction. Women's frequencies of observed gender-based discrimination were associated with higher stress and lower satisfaction, while men's frequencies of these observations were not associated with stress, but associated with increased satisfaction. CONCLUSIONS: Dental residents' stress, career satisfaction, experienced sexual harassment, and observed discrimination of women residents differ depending on the dental specialty program. Both male and female residents report more stress and less satisfaction the more they experience sexual harassment. The more women observe discrimination of women, the more stressed and the less satisfied they are. For men, the frequencies of these observations are not associated with stress, but positively associated with increased satisfaction.
Asunto(s)
Internado y Residencia , Satisfacción en el Trabajo , Odontología Pediátrica , Prostodoncia , Sexismo , Cirugía Bucal , Humanos , Femenino , Masculino , Sexismo/psicología , Cirugía Bucal/educación , Odontología Pediátrica/educación , Prostodoncia/educación , Acoso Sexual/psicología , Acoso Sexual/estadística & datos numéricos , Estrés Psicológico , Adulto , Encuestas y CuestionariosRESUMEN
STATEMENT OF PROBLEM: Maxillofacial prosthodontists were advanced digital technology (ADT) adopters early in the new Millennium. The past two decades saw a range of digital enablers emerge including digital imaging (internal and surface), digital surgical planning, digital functional assessment, subtractive and additive manufacturing, navigation, and robotics among others. Artificial Intelligence (AI) is the latest ADT arrival that will be a challenging disruptive technology. ADT has served as a profound change agent in maxillofacial prosthodontics. The intent was to explore the process and level of ADT engagement in maxillofacial prosthodontics. PURPOSE: The purpose was twofold. Firstly, to explore maxillofacial prosthodontic engagement of ADT. Secondly, to develop a discussion document to assist the American Academy of Maxillofacial Prosthetics (AAMP) with establishing a collective awareness and considered opinion on the future of maxillofacial prosthodontics in the digital era. MATERIAL AND METHODS: AAMP member interest in ADT was assessed through analysis of AAMP annual congress programs and publications in the Journal of Prosthetic Dentistry (JPD). The history of the maxillofacial prosthodontic journey to the digital era was undertaken with a selective literature review. The perceptions maxillofacial prosthodontists hold on ADT engagement was assessed through a survey of AAMP members. Developing an understanding of the influence AI was conducted with a review of pertinent literature. RESULTS: From 2011-2020, an annual mean of 38% of papers published in the JPD involved clinical use of ADT. From 2017-2019, 44% of invited presentations at AAMP annual congresses included clinical use of ADT. The journey to the digital era distinguished three periods with formative and consolidation periods influencing the innovation digital era. The AAMP member survey had a 59% response rate and studied 10 domains through 31 questions. Of the respondents, 89% thought ADT important to the future of maxillofacial prosthodontics. CONCLUSIONS: The discussion document will assist the AAMP in developing a collective consciousness and considered opinion on ADT in the future of maxillofacial prosthodontics. Members of the AAMP have a developed interest in clinical applications of ADT. A great challenge is that no formal education, training, or clinical competency requirements for ADT could be identified. Clinical competency requirements are important to prepare maxillofacial prosthodontics for the inevitability of a digital era future. The discussion document poses the fundamental question of whether maxillofacial prosthodontists will remain as passive end users of ADT and AI or will they become engaged knowledge workers that have determined clinical competency in ADT and AI in patient care. Without this knowledge worker role, maxillofacial prosthodontists may experience difficulty being part of the inevitable ADT-AI driven future.
Asunto(s)
Inteligencia Artificial , Prostodoncia , Humanos , América del Norte , Tecnología Digital , Prótesis Maxilofacial , Predicción , Diseño Asistido por ComputadoraRESUMEN
One of the significant drawbacks of using zirconium dioxide as a framework for prosthodontic structures is its propensity for breakage. Paradoxically, the higher the optical performance of zirconium dioxide, the more its mechanical durability tends to decrease and vice versa. A detailed analysis of the technological process has uncovered divergent opinions and significant disparities in recommendations concerning the fabrication of zirconium dioxide prosthodontic constructs. There are different recommendations regarding the need for abrasive blasting and regeneration firing. Consequently, conducting an in-depth experimental study on this matter and implementing the resulting findings will significantly contribute to addressing the challenges of prosthodontic rehabilitation for patients utilizing zirconium dioxide.
Asunto(s)
Prostodoncia , Traumatismos de los Tejidos Blandos , Circonio , Humanos , TemperaturaRESUMEN
OBJECTIVE: To analyze the influence of forming direction on the surface characteristics, elastic modulus, bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction, and to provide scientific basis and guidance for the clinical application of oral denture base resin materials. METHODS: The 3D printing technology was used to print denture base resin samples. The shape and size of the samples referred to the current standard for testing conventional denture base materials. The samples used for physical performance testing were cylindrical (with a diameter of 15 mm and a thickness of 1 mm) and printed at different angles along the Z axis (0°, 45°, 90°). Scanning electron microscope was used to observe the microscopic topography of the different samples. The color stability of different samples was observed by color stabilizer. The surface roughness of the samples was analyzed by using surface roughness tester. The Vickers hardness was measured to analyze the hardness of the samples. The samples used for mechanical performance testing were rectangular (elastic modulus and bending strength: A length of 64 mm, a width of 10 mm, and a height of 3.3 mm; fracture toughness: A length of 39 mm, a width of 8 mm, and a height of 4 mm), divided into two groups: W group and H group. The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X, Y axis plane, while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X, Y axis plane. The forming angles of both groups were equally divided into 0°, 45°, and 90°. The elastic modulus, bending strength and fracture toughness of different samples were studied through universal mechanical testing machine. SPSS 22.0 software was used for statistical analysis. RESULTS: The microscopic topography and roughness of different samples were closely related to the printing direction, with significant differences between the 0°, 45°, and 90° specimens. The 0° specimens had the smoothest surface (roughness < 1 µm). The surface of the 45° specimen was the roughest (roughness>3 µm). The microhardness of the 0° sample was the best [(196.13±0.20) MPa], with a significant difference compared with the 90° sample [(186.62±4.81) MPa, P < 0.05]. The mechanical properties of different samples were also closely related to the printing direction. The elastic modulus, bending strength, and fracture toughness of the 45° samples in the W group were the highest compared with the other groups. The results of elastic modulus showed that in the H group, the 45° specimens had the highest elastic mo-dulus, which was significantly different from the 0° and 90° specimens (P < 0.05). The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens (P < 0.05). The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group. The bending strength of the 90° specimens in the W group was the smallest, and there was a significant difference between 90° and the 0° and 45° specimens (P < 0.05); And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group (P < 0.05). The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2, which was specified in the denture base standard. The 45° samples in the W group were the highest, with significant differences compared with the 0° and 90° samples (P < 0.05). And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2. And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group (P < 0.05). CONCLUSION: The 0° samples had relatively better physical properties. The 45° samples had the best mechanical properties. But the fracture toughness of specimens (H group and 90° samples of W group) did not yet meet clinical requirements. That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction. Only when the performance of the printed samples in all directions met the minimum requirements of the standard, they could be used in clinical practice.
Asunto(s)
Impresión Tridimensional , Prostodoncia , Ensayo de Materiales , Propiedades de Superficie , Resistencia Flexional , Bases para DentaduraRESUMEN
Technological progress leads to new advances in dental education. One of the applications involves the use of virtual and augmented reality as educational aids. The emerging question is to establish if and how these enhancements may prove beneficial to the overall student learning process. A review of recent literature was conducted with the aim of providing evidence for the development of relevant clinical guidelines. The proposed topic attempted to provide answers to the questions of (a) how participants perform when using haptic devices compared to traditional tooth preparation methods on typodonts, (b) how the use of simulators is perceived by both students and educators, and (c) what added value simulators may have in prosthetic dentistry training. The main findings of this study showed that participants expressed satisfaction with the educational experience, finding it both stimulating and very similar to the actual clinical environment. However, differences between haptic and conventional methods were also apparent. Haptics was a significant predictor of clinical crown performance. Significantly better results and shorter preparation times tended to increase with experience. In conclusion, self-directed learning appears to be beneficial in the clinical education that follows data-driven approach. At the pre-laboratory level, simulators may act as an initial familiarization instrument. At the preclinical level, they may aid in detecting students who require extra assistance, or to provide extra training hours for students lacking adequate competency to enter the clinical training phase.
Asunto(s)
Educación en Odontología , Prostodoncia , Educación en Odontología/métodos , Prostodoncia/educación , Humanos , Estudiantes de Odontología/psicología , Competencia ClínicaRESUMEN
PURPOSE: The study aimed to compare the performance of four pre-trained convolutional neural networks in recognizing seven distinct prosthodontic scenarios involving the maxilla, as a preliminary step in developing an artificial intelligence (AI)-powered prosthesis design system. MATERIALS AND METHODS: Seven distinct classes, including cleft palate, dentulous maxillectomy, edentulous maxillectomy, reconstructed maxillectomy, completely dentulous, partially edentulous, and completely edentulous, were considered for recognition. Utilizing transfer learning and fine-tuned hyperparameters, four AI models (VGG16, Inception-ResNet-V2, DenseNet-201, and Xception) were employed. The dataset, consisting of 3541 preprocessed intraoral occlusal images, was divided into training, validation, and test sets. Model performance metrics encompassed accuracy, precision, recall, F1 score, area under the receiver operating characteristic curve (AUC), and confusion matrix. RESULTS: VGG16, Inception-ResNet-V2, DenseNet-201, and Xception demonstrated comparable performance, with maximum test accuracies of 0.92, 0.90, 0.94, and 0.95, respectively. Xception and DenseNet-201 slightly outperformed the other models, particularly compared with InceptionResNet-V2. Precision, recall, and F1 scores exceeded 90% for most classes in Xception and DenseNet-201 and the average AUC values for all models ranged between 0.98 and 1.00. CONCLUSIONS: While DenseNet-201 and Xception demonstrated superior performance, all models consistently achieved diagnostic accuracy exceeding 90%, highlighting their potential in dental image analysis. This AI application could help work assignments based on difficulty levels and enable the development of an automated diagnosis system at patient admission. It also facilitates prosthesis designing by integrating necessary prosthesis morphology, oral function, and treatment difficulty. Furthermore, it tackles dataset size challenges in model optimization, providing valuable insights for future research.
Asunto(s)
Maxilar , Redes Neurales de la Computación , Prostodoncia , Humanos , Maxilar/diagnóstico por imagen , Prostodoncia/métodos , Inteligencia ArtificialRESUMEN
AIM: Implant therapy in partially edentulous patients has become the most adapted and predictable treatment modality. The success rate of implants has been measured in terms of esthetic, biological, and technical factors such as radiographic bone loss, prosthetic complications, and stability. Despite the existence of several indices for the esthetic assessment of implant crowns, a need for functional evaluation of the implant crown with an objective and reproducible score has arisen. The study aims to validate the reproducibility of the functional implant prosthodontic score (FIPS) and the influence exerted by different dental specialties while evaluating posterior single-unit implant crowns. STUDY SETTING AND DESIGN: This was a prospective clinical study. MATERIALS AND METHODS: Fifteen patients with cement-retained single-implant crowns in the posterior region of the jaws were included. Eight examiners, two prosthodontists, two periodontists, two oral surgeons, and two orthodontists evaluated 15 photographs of single-unit implant crowns during the 1-year follow-up examination. The examiners assessed the photographs for FIPS, which includes five parameters for objectively evaluating the single-unit implant crowns. Assessments were performed twice at a gap of 4 weeks. STATISTICAL ANALYSIS USED: Pearson's correlation with a 95% confidence interval was calculated for the intra-examiner and the Kruskal-Wallis test for inter-examiner reproducibility. RESULTS: The mean total FIPS scores for all included examiners were 7.133 for time T1 and 7.074 for time T2, showing a strong Pearson correlation coefficient for intra-examiner reproducibility. No significant difference was analyzed among different specialties with statistically significant values of the Kruskal-Wallis test. CONCLUSION: Intra- and inter-examiner analysis showed very consistent results during the reproducibility assessment of FIPS. The results validated the use of FIPS as a long-term predictive functional evaluation tool for the single-implant crowns in posterior sites irrespective of the effect of different dental specialties. It could be used for risk estimation and prognosis for long-term survival and performance of implant crowns.
Asunto(s)
Coronas , Humanos , Estudios Prospectivos , Reproducibilidad de los Resultados , Femenino , Masculino , Especialidades Odontológicas , Implantes Dentales de Diente Único , Estética Dental , Adulto , Persona de Mediana Edad , Prótesis Dental de Soporte Implantado , Prostodoncia/métodosRESUMEN
In the field of prosthodontics, the use of virtual patients for biomimetic restoration holds great promise for various applications. Virtual patients consist of digitized data that encompasses details on the morphology, structure, and spatial relationships within the maxillofacial and intraoral regions. Nonetheless, there are several challenges associated with acquiring digital data, achieving accurate alignment, and recording and transferring dynamic jaw movements. This paper aims to concentrate on the process of constructing virtual patients, highlight the key and challenging aspects of virtual patient construction, and advocate for the extensive adoption and utilization of virtual patient technology.