Restoration-repair potential of resin-modified glass ionomer cement.

This in vitro study aimed to evaluate the repair bond strength of resin-modified glass ionomer cement using either the same material or a universal adhesive in the etch-and-rinse and self-etch modes plus resin composite. Twenty-four resin-modified glass ionomer cement blocks were stored in distilled water for 14 d and thermocycled. Sandpaper ground specimens were randomly assigned to three experimental groups according to the repair protocol: resin-modified glass ionomer cement (Riva Light Cure, SDI) and universal adhesive (Scotchbond Universal Adhesive, 3M Oral Care) in etch-and-rinse or self-etch modes and nanohybrid resin composite (Z350 XT, 3M Oral Care). After 24 h of water storage, the blocks were sectioned, and bonded sticks were subjected to the microtensile bond strength (µTBS) test. One-way ANOVA and Tukey's test were used to analyze the data. The failure mode was descriptively analyzed. The highest µTBS values were obtained when the resin-modified glass ionomer cement was repaired using the same material (p < 0.01). In addition, the mode of application of the universal adhesive system did not influence the repair bond strength of the resin-modified glass ionomer cement. Adhesive/mixed failures prevailed in all groups. Repair of resin-modified glass ionomers with the same material appears to be the preferred option to improve bond strength.

Effect of brushing simulation on the wear behavior of repaired CAD-CAM restorations.

OBJECTIVE: The aim of the present study was to evaluate the influence of multidirectional brushing on the surface roughness, morphology, and bonding interface of resin-repaired CAD-CAM ceramic and composite restorations. MATERIALS AND METHODS: Twelve (N = 12) blocks (4 mm × 4 mm × 2 mm for parallel axis; 5 mm × 4 mm × 2 mm for perpendicular axis) of lithium disilicate glass-ceramic (IPS e.max CAD, Ivoclar AG) and CAD-CAM resin composite (Tetric CAD, Ivoclar AG) were obtained and repaired with direct resin composite (Clearfil AP-X, Kuraray). An abrasive slurry was prepared and the brushing was performed according to each restorative material and axis of brushing (n = 6; perpendicular to repair interface and parallel to repair interface) during 3,650 cycles (240 strokes per minute) to simulate 3 years of brushing. The surface roughness (Ra) and the profile variation for each material (restoration and direct repair resin composite) were measured at the baseline condition and after brushing, and the mean roughness and presence of steps at the repair interface were evaluated through factorial analysis of Variance (ANOVA). Scanning Electron Microscopy (SEM) images were taken to evaluate the surface topography of the repaired materials after brushing. RESULTS: The mean roughness of the repaired CAD-CAM restorations was affected by the brushing (P < .05), mainly when evaluating the repair material and the interface (P < .05), while the restorative CAD-CAM materials presented more stable values. The profile evaluation showed higher steps at the interface when repairing lithium disilicate than for CAD-CAM resin composite. CONCLUSION: Repaired CAD-CAM restorations were susceptible to wear after brushing simulation. The surface roughness of the direct resin composite was the most affected leading to step development at the interface, particularly in the repaired lithium disilicate samples. Cinical maintenance recalls and polishing protocols must be considered to enhance the longevity of such restorations.

Teaching of composite restoration repair in Brazilian dental schools.

OBJECTIVES: The aim was to investigate aspects of the teaching of restoration repair as a minimally invasive alternative to replacing defective direct composite restorations in undergraduate curricula teaching programs in Brazilian dental schools. METHODS: A 14-item validated survey questionnaire was mailed to directors/coordinators of operative/restorative dentistry teachers of Brazilian Dental Schools. Data were collected on demographic characteristics of the teachers and institutions, together with questions on the teaching of the repair of defective resin-based composite restorations as part of the school curriculum; the rationale behind the teaching; the nature of the teaching (preclinical and/or clinical); how techniques were taught, indications for repair, operative techniques, materials used, patient acceptability and expected longevity of completed repairs. RESULTS: Two hundred and twenty-two (94%) directors/ coordinators of dental curricula in Brazil were contacted. One hundred and thirty-one directors/coordinators (59%) replied, providing the e-mail address from the teacher responsible for the operative/restorative dentistry program in their school. Of these, 104 responded to the questionnaire (79% response rate). Ninety-three (89%) of the participating schools reported teaching composite repairs as an alternative to replacing restorations. Of the theoretical content, 43% was taught at preclinical and clinical levels, whereas most practical experience (53%) was acquired at clinical levels. Eighty-eight schools (95%) reported tooth substance preservation being the main reason for teaching repair techniques. All schools that taught repairs reported high patient acceptability. CONCLUSIONS: The teaching of composite restoration repair as an alternative to restoration replacement is established in undergraduate programs in most of the Brazilian dental schools surveyed. CLINICAL SIGNIFICANCE: The reasons for teaching restoration repair in Brazil were found to be quite unanimous among teachers, especially regarding the preservation of tooth structure. Variations were found in the clinical indications for repair, suggesting the need for further investigations. Monitoring repaired restorations should be encouraged and could contribute to future studies.

Evidence-practice gap in treatment decisions about defective composite and amalgam restorations among Brazilian dentists

Better understanding of dentists' decision-making about defective restorations is needed to close the evidence-practice gap (EPG). This study aimed to quantify the EPG about defective restorations and identify dentist factors associated with this EPG. Methods: 216 dentists from São Paulo State, Brazil, completed a questionnaire about three clinical case scenarios involving defective composite restorations with cementum-dentin margins (case 1) and enamel margins (case 2), and an amalgam (case 3) restoration. Dentists were asked what treatment, if any, they would recommend, including preventive treatment, polishing, re-surfacing, or repairing the restoration, or replacing the entire restoration. Replacing the entire restoration in any of these three scenarios was classified as inconsistent with the evidence, comprising an EPG. Bivariate analyses using Chi-square, ANOVA, or multiple comparison tests were performed (p<.05). Results: for defective composite restorations, 49% and 55% of dentists chose to replace the entire restoration for cases 1 and 2, respectively. Twenty-nine percent of dentists chose to replace the entire amalgam restoration. Dentists were significantly more likely to choose to replace the defective amalgam restoration than the composite restoration with a defect at the cementum-dentin margins or the enamel margins (both at p < .001). Female dentists were more likely to choose a conservative treatment than male dentists for cases 1 (p=.034) and 2 (p=.009). Dentists with a higher percentage of patients interested in individualized caries prevention were also more conservative in case 1 (p=.045). Conclusion: a substantial EPG regarding treatment decisions for defective restorations exists, especially for composite restorations. This study adds to the international evidence that an EPG exists in this clinical area and that global strategies need to be developed to close the gap

Reparación de defecto localizado en restauración de amalgama como tratamiento de mínima intervención en cariología / Repair of a localized defect in a restoration with amalgam filling as minimal intervention treatment in cariology

Introducción: La reparación de restauraciones ha sido estudiada desde muy recientemente, pero a pesar de haber demostrado efectividad y mejoras en la terapéutica de la caries dental, aún tiene seguidores y detractores, lo que justifica la necesidad de estudios que sigan avalando tales prácticas. Objetivo: Describir, a través de la presentación de un caso, la reparación de un defecto localizado en una restauración de amalgama como tratamiento de mínima intervención en cariología. Presentación del caso: Paciente femenina de 16 años con antecedentes de salud acude a consulta refiriendo una pequeña fractura de restauración en diente 4.6 desde hace varias semanas. La regularización del defecto en la restauración, la mínima preparación cavitaria, la eliminación del fragmento de la base intermedia, la protección del complejo dentino-pulpar y el llenado de la cavidad resultante, fueron los primeros pasos de una técnica que se cumplimentó luego del pulido final de la interface tejido dentario-restauración y se evolucionó cinco años después. Se evidenció el estado y presencia de la reparación de la restauración realizada, sin fracturas añadidas, microfiltraciones, sintomatologías, desplazamientos ni pérdidas de la continuidad. Conclusiones: La reparación del defecto localizado de amalgama se realizó con el fin de preservar los tejidos dentarios no afectados como lo dicta la mínima intervención en cariología. Cinco años más tarde, la evolución evidencia una práctica que se tradujo en resultados satisfactorios e incremento de la calidad de vida de la paciente(AU)

Introduction: Restoration repair has been studied recently; but, even when it has demonstrated effectiveness and improvements in the therapy of dental caries, it still has followers and detractors that justify the need for studies that continue supporting such practices. Objective: To describe, through a case presentation, the repair of a defect located in a restoration with amalgam filling as minimal intervention treatment in cariology. Case presentation: Sixteen-year-old female patient with health history that went to the clinic reporting a small fracture of a restoration performed in tooth 4.6 several weeks ago. The regularization of the defect in the restoration, minimum cavity preparation, elimination of the fragment of the intermediate base, protection of the dentin-pulp complex, and filling of the resulting cavity were the first steps of a technique that was completed after the final polishing of the dental tissue/restoration interface that was evolved five years later. The status and presence of the restoration repair performed without added fractures, microfiltration, symptomatology, displacement or loss of continuity was evidenced. Conclusions: The repair of the localized defect in a restoration with amalgam filling was performed with the aim of preserving the unaffected dental tissues as dictated by minimal intervention in cariology. Five years later, the patient´s evolution shows a practice that resulted in satisfactory results and an increase in the patient's quality of life(AU)

Técnica innovadora semidirecta de Individualización con endoposte de fibra / Innovative chairside technique of Individualized fiber post

La restauración con sistema de endoposte de fibra mediante técnica de individualización o anatómica es conocida desde hace tiempo. Se presenta una alternativa para ser realizada de manera semidirecta mediante la confección de un modelo flexible translúcido que permite reducir algunos inconvenientes de la técnica directa de individualización. El material empleado para el modelo es un material de bajo costo y accesible para cualquier profesional que desee emplear esta alternativa de restauración. (AU)

Anatomical or individualized fiber post technique has been used for many years now. An alternative is presented to be done chairside with a flexible and translucid model obtained that allows to reduce some drawbacks of the direct anatomical technique. The material used is less expensive than other options and might be used by any professional that want to learn this technique. (AU)

Removal of Root Canal Fillings in Curved Canals Using Either Mani GPR or HyFlex NT Followed by Passive Ultrasonic Irrigation.

This study compared the efficacy of HyFlex NT (HF; Coltene, New York, NY) and Mani GPR (MN; Mani Inc, Tokyo, Japan) systems followed by a supplementary approach with passive ultrasonic irrigation (PUI) in removing the filling material from curved root canals during retreatment. The mesial canals from 20 extracted mandibular molars with Vertucci type IV configuration were instrumented and obturated (N = 40). Each mesial canal was retreated using either HF or MN instruments, alternating the system used per canal from root to root. The final preparation size was 40/0.04 for both systems. The volume of canal filling material was assessed by means of micro-computed tomographic (micro-CT) imaging before and after retreatment, and the working time was recorded. Canals still showing remnants of filling material were subjected to a supplementary approach with PUI, and another micro-CT scan was taken. The percentage of filling material removed with MN instruments and HF was similar (95.5% and 92.7%, respectively) (P > .05). MN required significantly less time to remove the filling material (P < .05). The supplementary approach with PUI significantly enhanced the removal of filling material (P < .05). Both systems were equally effective in removing the root canal filling during retreatment. MN was faster than HF. The supplementary approach with PUI significantly improved filling material removal.

Longevidade clínica de restaurações defeituosas tratadas pela técnica de substituição e técnicas alternativas em dentes permanentes. Uma revisão sistemática / Clinical longevity of defective restorations treated by replacement technique and alternative techniques in permanent teeth. A systematic review

Objetivos: esta revisão sistemática teve como objetivo verificar se há diferença na longevidade clínica das restaurações defeituosas em dentes permanentes tratadas pela técnica da substituição e técnicas alternativas. Fontes: foram realizadas buscas eletrônicas nas bases de dados PubMed, The Cochrane Library, Web of Science, Scopus, LILACS, BBO, seguida de busca manual nas listas de referências dos estudos incluídos, sem restrições de idioma, ano de publicação e local onde o estudo foi realizado. Dados: foram incluídos onze ensaios clínicos controlados randomizados e quasi randomizados que compararam o desempenho clínico das restaurações defeituosas tratadas através da técnica da substituição ou técnicas alternativas em dentes permanentes, e tempo de acompanhamento de ao menos 2 anos. A qualificação do risco de viés foi realizada com a ferramenta sugerida pela Colaboração Cochrane e dados como material utilizado, tratamento e principais resultados foram extraídos. Resultados: após a remoção das duplicatas, 5.554 estudos foram selecionados para a leitura dos títulos e resumos. Após as fases de leitura de títulos, resumos, íntegra e qualificação do risco de viés, nove preencheram os critérios de elegibilidade e mais dois foram adicionados por busca manual, gerando um total de onze artigos para a análise desta revisão sistemática. Conclusão: as restaurações defeituosas tratadas pelas técnicas da substituição e reparo não apresentaram diferença significativa na longevidade clínica na maioria dos estudos longitudinais avaliados, sendo ambas as técnicas indicadas para o tratamento de restaurações defeituosas em dentes permanentes; o reparo, contudo, gerou maior preservação da estrutura dental remanescente. O acabamento e o selamento não apresentaram longevidade clínica adequada e, portanto, foram consideradas técnicas alternativas contra-indicadas. Significância Clínica: A Odontologia contemporânea é baseada em restaurações minimamente invasivas. A indicação de uma técnica mais conservadora deve ter vantagem inquestionável. Estudos em geral, mostraram-se contraditórios quando compararam a técnica da substituição e as técnicas alternativas para o tratamento de restaurações defeituosas em dentes permanentes. Assim, esta revisão sistemática foi conduzida para responder a esta pergunta mediante a avaliação de estudos clínicos somente longitudinais. (AU)

Objectives: this systematic review aimed to verify if there is difference in the clinical longevity of the defective restorations in permanent teeth treated by the replacement technique and alternative techniques. Source: we searched the databases PubMed, The Cochrane Library, Web of Science, Scopus, LILACS, BBO, followed by manual search in the reference lists of included studies, without language restrictions, year of publication and place where the study was performed. Data: we included eleven randomized and quasi-randomized controlled clinical trials comparing the clinical performance of defective dental restorations treated by replacement technique or alternative techniques on permanent teeth, and follow-up time of at least 2 years. The risk of bias qualification was performed using the tool suggested by the Cochrane Collaboration and data such as material used, treatment and the main results were extracted. Results: after the removal of duplicates, 5,554 studies were selected for the reading of titles and abstracts. After the reading, titling, summarizing, and bias risk qualification phases, nine met the eligibility criteria and two more were added by manual search, generating a total of eleven articles for the analysis of this Systematic Review. Conclusions: the defective restorations treated by the replacement and repair techniques did not present significative difference in clinical longevity in most of the longitudinal studies evaluated, both techniques being indicated for the treatment of defective restorations in permanent posterior teeth; the repair, however, presented increased remanescent dental structure preservation. Refurbishment and sealing did not present adequate clinical longevity and were, therefore, considered contraindicated alternative techniques. Clinical Significance: Contemporary dentistry is based on minimally invasive restorations. The indication of a more conservative technique should have an unquestionable advantage. Studies in general have been contradictory when comparing the substitution technique and alternative techniques for the treatment of defective restorations in permanent teeth. Thus, this systematic review was conducted to answer this question through the evaluation of of only clinical longitudinal studies. (AU)

One-year aging effects on microtensile bond strengths of composite and repairs with different surface treatments.

The present study aimed to evaluate effects of different surface treatments and aging of composite cylinders on bond strength of composite resin repair. Thirty-two composite cylinders were produced and divided into four groups according to type of surface treatment and storage time of composite cylinder and repair. Cylinder surface of control group (Gcontrol) received no treatment before composite repair. Other groups were sandblasted with aluminum oxide (GAl2O3), followed by silane (GAl2O3sil) or adhesive (GAl2O3ad). Composite cylinders were stored in artificial saliva for either 24 hours or 1 year. Repairs were performed and stored in artificial saliva for 24 hours or 1 year and repair strength was evaluated using microtensile bond strength test. Data were submitted to Student's t test, two-way ANOVA, and post hoc test for storage time and treatment (α = 0.05). Gcontrol group showed lower values of aging of composite cylinder and storage time of repair (24 hours or 1 year for both) compared with other groups (p < 0.05). GAl2O3ad and GAl2O3sil groups did not exhibit decreased microtensile bond strength with aged repairs (1 year; p > 0.05). Polymer degradation was significant for composite cylinders during the first year of storage in Gcontrol, GAl2O3, and GAl2O3ad groups (p < 0.05). In GAl2O3sil group, storage time of composite cylinders was not significant (p > 0.05). Aging of composite resin influenced bond strength of restoration repair for up to 1 year. Sandblasting with Al2O3, followed by application of silane layer, produced high bond strength after composite or repair aging.

One-year aging effects on microtensile bond strengths of composite and repairs with different surface treatments

Abstract The present study aimed to evaluate effects of different surface treatments and aging of composite cylinders on bond strength of composite resin repair. Thirty-two composite cylinders were produced and divided into four groups according to type of surface treatment and storage time of composite cylinder and repair. Cylinder surface of control group (Gcontrol) received no treatment before composite repair. Other groups were sandblasted with aluminum oxide (GAl2O3), followed by silane (GAl2O3sil) or adhesive (GAl2O3ad). Composite cylinders were stored in artificial saliva for either 24 hours or 1 year. Repairs were performed and stored in artificial saliva for 24 hours or 1 year and repair strength was evaluated using microtensile bond strength test. Data were submitted to Student’s t test, two-way ANOVA, and post hoc test for storage time and treatment (α = 0.05). Gcontrol group showed lower values of aging of composite cylinder and storage time of repair (24 hours or 1 year for both) compared with other groups (p < 0.05). GAl2O3ad and GAl2O3sil groups did not exhibit decreased microtensile bond strength with aged repairs (1 year; p > 0.05). Polymer degradation was significant for composite cylinders during the first year of storage in Gcontrol, GAl2O3, and GAl2O3ad groups (p < 0.05). In GAl2O3sil group, storage time of composite cylinders was not significant (p > 0.05). Aging of composite resin influenced bond strength of restoration repair for up to 1 year. Sandblasting with Al2O3, followed by application of silane layer, produced high bond strength after composite or repair aging.

Efeito de diferentes sistemas de obturação na resistência à fratura de raízes tratadas endodonticamente / The Influence of different obturation systems on the fracture resistance of endodontically treated roots

Objective: This study aimed to compare the fracture resistance of endodontically treated roots filled by different obturation systems. Material and methods: Ninety-six maxillary central incisors were used and decoronated, retaining 12 mm of the roots. On the basis of obturation systems, the roots were randomly divided into 4 groups (n=24): Group1 (COGR): control group (unprepared, unfilled), Group 2 (AVGR): ActiV GP points/ActiV GP sealer, Group 3 (GPGR): Gutta percha points / AH plus sealer, and Group4 (GAGR): Gutta percha points/ActiV GP sealer. The last three groups were obturated with the single cone technique. The roots were then stored in 100% relative humidity at 37 °C for 2 weeks. A vertical compressive force was exerted in a universal testing machine until fracture occurred. Data were statistically analyzed using one-way ANOVA. Results: Mean (SD) failure loads for groups ranged from 920.51 ± 210.37 to 1113.44 ± 489.42 N. The fracture resistance between the different study groups indicated no statistical difference (p>0.05). Conclusions: ActiV GP system did not exert a significant effect on the fracture resistance of endodontically treated teeth.(AU)

Objective: Comparar a resistência à fratura de raízes tratadas endodonticamente obturadas através de diferentes sistemas. Materiais e Métodos: Noventa e seis incisivos centrais superiores foram utilizados, tiveram as coroas removidas, restando 12 mm de raíz. De acordo com o sistema de obturação, as raízes foram divididas em 4 grupos (n=24): Grupo1 (COGR): grupo controle (sem preparo, sem preenchimento), Grupo2 (AVGR): cones ActiV GP / cimento ActiV GP, Grupo3 (GPGR): cones de guta percha / cimento AH plus, e Grupo4 (GAGR): cones de guta percha / cimento ActiV GP. Os últimos três grupos foram obturados através da técnica de cone único. As raízes foram armazenadas em 100% de umidade relativa a 37 °C durante 2 semanas. Uma força compressiva vertical foi aplicada através de uma máquina de ensaio universal até ocorrer fratura. Os dados foram analisados estatisticamente através de ANOVA ­ 1 fator. Resultados: A carga média (SD) obtida no momento da falha variou entre 920.51 ± 210.37 até 1113.44 ± 489.42 N. A resistência à fratura entre os diferentes grupos estudados não indicaram diferença estatística. Conclusão: O sistema ActiV GP não exerceu um efeito significante na resistência à fratura em dentes tratados endodonticamente.(AU)

Restauración de molares endodonciados, con resina híbrida sobre muñón de amalgama. A propósito de un caso / Restoration of endodontic molars with hybrid resin over amalgam stump. About a case

Introducción: En la actualidad la restauración funcional y estética de dientes endodonciados con gran pérdida de tejido dentario, es efectuada a través del método indirecto; sin embargo, la construcción de muñones de amalgama como elemento de sustitución de metal es una opción terapéutica viable. Objetivo: Mostrar la viabilidad de la restauración estética y funcional de molares endodonciados y con gran pérdida de tejido dentario, por vía directa mediante resina híbrida sobre muñón de amalgama. Presentación del caso: Tratamiento impuesto a un paciente de 35 años con antecedentes de traumatismo dentario condicionantes de fracturas complicadas de corona en 36 y 37, tratados con endodoncias radicales de 2 años de evolución. Acudió a la consulta presentando pérdidas de más de dos tercios del tejido coronal en ambos casos. Luego de comprobar que ambos molares cumplían con los requerimientos, se realizó la preparación de las cavidades, seguida de la confección de muñones de amalgama, sobre los cuales pasadas las 48 horas, se realizó la restauración definitiva con resina híbrida nano composite. Conclusiones: El tratamiento cosmético con nano composite sobre muñón de amalgama, resulta una alternativa terapéutica viable en la restauración estética y funcional por vía directa, aun en molares con gran pérdida de tejido dentario y tratamiento pulporadicular radical(AU)

Introduction: Nowadays functional and aesthetic restoration of endodontic teeth with a great loss of dental tissue, is performed by means of an indirect method, however the construction of amalgams stumps as an element for the metal substitution is a viable therapeutic option. Objective: To show the viability of endodontic molars aesthetic and functional restoration with a great loss of dental tissue, through direct method with resin on amalgam stump. Case Presentation: Treatment applied to a 35-year-old patient with antecedents of traumatism conditioning complicated fractures of crown in 36 and 37, treated with radical endodontic therapy 2 years ago. Arrived to the consulting room presenting losses of more than two thirds of the coronal tissues in both cases. After verifying that both molars met the requirements, the cavities were prepared, followed by the conformation of amalgams stumps over which after 48h, was applied a nano hybrid resin for the definitive restoration. Conclusions: The cosmetic treatment with Nano composite resin over the amalgam stump is an alternative and viable therapy for the functional and aesthetic restoration by means of a direct procedure, even in molars with great loss of dental tissue and subjected to radical endodontic therapy(AU)

Generalidades sobre la mínima intervención en cariología / General remarks about minimal intervention dentistry

Introducción: los tratamientos de la caries dental con mínima intervención incorporan a la ciencia estomatológica: detección, diagnóstico y tratamientos a niveles microscópicos. Objetivo: caracterizar, a través de una revisión bibliográfica, la mínima intervención en el tratamiento de la caries dental.Métodos: se realizó una revisión de la literatura científica sobre mínima intervención en cariología, a través de los buscadores de información y plataformas: SciELO, Hinari, y Medline. Se revisaron 25 revistas de impacto. Se incluyó artículos en idioma inglés y español. Los descriptores empleados para la búsqueda fueron: mínima intervención, odontología/ estomatología mínimamente invasiva, cariología, mínima intervención en cariología, tratamiento actual de la caries dental, filosofía mínima intervención, las combinaciones entre ellos y su equivalente en inglés. Se obtuvo 204 artículos; luego de ser filtrados quedaron 32 publicaciones científicas y un libro, que enfocaban esta temática de manera más integral. El 97 por ciento de la bibliografía correspondía a publicaciones realizadas durante los últimos 5 años. Integración de la información: se realiza análisis sobre la prevención, remineralización y tratamientos con técnicas de mínima intervención para la remoción de la caries dental. Conclusiones: la mínima intervención propicia el actuar científicamente de acuerdo a la etapa del proceso caries dental. Es una concepción teórica con herramientas para la práctica encaminada a preservar la mayor cantidad posible de tejido dental de manera que los dientes tengan mayor funcionabilidad(AU)

Introduction: minimal intervention treatments for dental caries enrich dental practice by incorporating detection, diagnosis and microscopic techniques into it. Objective: characterize minimal intervention in the treatment of dental caries by means of a bibliographic review about the subject. Methods: a review was conducted of the literature about minimal intervention in dentistry, using the search engines and platforms SciELO, Hinari and Medline. Twenty-five high impact journals were reviewed. The papers included were in English or Spanish. The descriptors used in the search wereminimal intervention, minimally invasive dentistry, cariology, minimal intervention dentistry, current treatments for dental caries and minimal intervention philosophy, as well as combinations thereof and their counterparts in Spanish. 204 papers were obtained. After being filtered, the sample was composed of 32 scientific journals and one book, i.e. the materials that approached the topic in a more comprehensive manner. 97 percent of the bibliography reviewed had been published in the last five years. Data integration: an analysis was conducted about prevention, remineralization and minimal intervention techniques for the removal of dental caries.Conclusions: Minimal intervention dentistry is characterized by adopting a position in which intervention or preparation of dental tissue is the last choice of therapy resorted to after applying a whole set of prevention and remineralization techniques(AU)

Generalidades sobre la mínima intervención en cariología / General remarks about minimal intervention dentistry

Introducción: los tratamientos de la caries dental con mínima intervención incorporan a la ciencia estomatológica: detección, diagnóstico y tratamientos a niveles microscópicos. Objetivo: caracterizar, a través de una revisión bibliográfica, la mínima intervención en el tratamiento de la caries dental. Métodos: se realizó una revisión de la literatura científica sobre mínima intervención en cariología, a través de los buscadores de información y plataformas: SciELO, Hinari, y Medline. Se revisaron 25 revistas de impacto. Se incluyó artículos en idioma inglés y español. Los descriptores empleados para la búsqueda fueron: mínima intervención,odontología/estomatología mínimamente invasiva, cariología, mínima intervención en cariología, tratamiento actual de la caries dental, filosofía mínima intervención, las combinaciones entre ellos y su equivalente en inglés. Se obtuvo 204 artículos; luego de ser filtrados quedaron 32 publicaciones científicas y un libro, que enfocaban esta temática de manera más integral. El 97 por ciento de la bibliografía correspondía a publicaciones realizadas durante los últimos 5 años. Integración de la información: se realiza análisis sobre la prevención, remineralización y tratamientos con técnicas de mínima intervención para la remoción de la caries dental. Conclusiones: la mínima intervención propicia el actuar científicamente de acuerdo a la etapa del proceso caries dental. Es una concepción teórica con herramientas para la práctica encaminada a preservar la mayor cantidad posible de tejido dental de manera que los dientes tengan mayor funcionabilidad(AU)

Introduction: minimal intervention treatments for dental caries enrich dental practice by incorporating detection, diagnosis and microscopic techniques into it. Objective: characterize minimal intervention in the treatment of dental caries by means of a bibliographic review about the subject. Methods: a review was conducted of the literature about minimal intervention in dentistry, using the search engines and platforms SciELO, Hinari and Medline. Twenty-five high impact journals were reviewed. The papers included were in English or Spanish. The descriptors used in the search wereminimal intervention, minimally invasive dentistry, cariology, minimal intervention dentistry, current treatments for dental caries and minimal intervention philosophy, as well as combinations thereof and their counterparts in Spanish. 204 papers were obtained. After being filtered, the sample was composed of 32 scientific journals and one book, i.e. the materials that approached the topic in a more comprehensive manner. 97 percent of the bibliography reviewed had been published in the last five years. Data integration: an analysis was conducted about prevention, remineralization and minimal intervention techniques for the removal of dental caries. Conclusions: Minimal intervention dentistry is characterized by adopting a position in which intervention or preparation of dental tissue is the last choice of therapy resorted to after applying a whole set of prevention and remineralization techniques(AU)

Repairabilitiy of aged resin composites mediated by different restorative systems / Reparo de resinas compostas envelhecidas e mediadas por diferentes materiais restauradores

The aim of this study was to evaluate the shear bond strengthof resin composite repairs with and without aging of thesurface to be repaired, using different adhesive systems andresin composites. Ninety specimens were prepared: 10 for theControl Group (GC - without repair); 40 for Group I (GI -repairs after 7 days) and 40 for Group II (GII - repairs after180 days). Groups I and II were divided into 4 subgroups of10 specimens each, according to the adhesive system andcomposite resin used: A) Adper Scotch Bond Multipurpose +Filtek Z350 XT; B) Adper Single Bond Plus + Filtek Z350 XT;C) Adper Scotch Bond Multipurpose + Esthet-X; D) AdperSingle Bond Plus + Esthet-X. The specimens were tested forshear strength in a universal testing machine. The resultswere analyzed by two-factor one-way ANOVA and Fisher’spost hoc tests (alpha=0.05). The control group had betterperformance than the other groups. There was no significantdifference when comparing different adhesive systems andcomposite resins. Repairs performed at 7 days were betterthan those performed at 180 days. The composite repairsdecreased the mechanical strength of the restoration. Agingof the resin substrate may decrease repair bond strength overtime, regardless of the type of adhesive systems and resin composites used.

Avaliar a resistência de união ao cisalhamento de reparos deresina composta com e sem envelhecimento da superfície a serreparada, utilizando diferentes sistemas adesivos. Noventacorpos de prova foram confeccionados sendo: 10 para o GrupoControle (GC - sem reparo); 40 para o Grupo I (GI - reparosapós 7 dias) e 40 para o Grupo II (GII – reparos após 180 dias).Para os reparos, os grupos GI e GII foram subdivididos em 4subgrupos com 10 corpos de prova, variando o sistema adesivoe a resina composta: A) Adper Scotch Bond Multipurpose+Filtek Z350XT; B)Adper Single Bond Plus+ Filtek Z350XT;C)Adper Scotch Bond Multipurpose+ Esthet-X; D) AdperSingle Bond Plus+ Esthet-X. Os corpos de prova foramsubmetidos a uma força de cisalhamento em uma máquina deensaio universal (EMIC). Os resultados foram analisados peloteste estatístico Anova dois fatores, seguido pelo teste deFisher ́s. Observou-se melhor comportamento do grupocontrole sobre os demais grupos, além disso, os reparosrealizados aos 7 dias foram superiores aos dos realizados em180 dias. Não houve diferença significativaquando secomparou diferentes sistemas adesivos e resinas compostas.Os reparos de resina composta diminuem a resistênciamecânica da restauração.O envelheci mento do substrato deresina pode diminuir a resistência ao reparo ao longo dotempo, independentemente do tipo de sistemas adesivos eresinas compostas utilizados.

Avaliacão clínica de restauracões de resina composta em molares decíduos estudo piloto / A clinical evaluation of composite restorations in primary molars - an interim study

As restaurações de resina composta têm sido amplamente utilizadas na Clínica Infantil, pois além de preservarem a estrutura dental sadia são mais estéticas e o seu desgaste é semelhante ao desgaste fisiológico do dente decíduo. Objetivos: avaliar o comportamento e a longevidade das restaurações realizadas com resina composta em dentes decíduos posteriores utilizando os métodos USPHS e FDI. Materiais e Métodos: foram selecionadas 09 crianças que possuíam 34 restaurações eclusas ou ocluso-proximal em molares decíduos, realizadas no curso de graduação da Universidade Luterana do Brasil Cachoeira do Sul/RS com as resinas Charisma®, Filtekl P60, Filtekl Z250 XT. As restaurações foram avaliadas por um examinador cego para os objetivos do estudo, segundo critérios dos métodos USPHS e FOI. A análise estatística foi realizada com o teste Kruskal-Wallis, com nível de significãncia 5%. Resultados: as 34 restaurações feitas com as três resinas compostas não apresentaram diferenças em relação à maioria dos critérios nos dois métodos empregados. Apenas para o critério manchamento superficial houve diferença entre as resinas compostas (p=0,006), sendo que a resina Filtek P60 demonstrou maior manchamento superficial do que as resinas Charisma e Filtek Z250. Conclusões: as três resinas compostas mostraram-se satisfatórias durante o período de tempo avaliado, confirmando a sua indicação para tratamentos restauradores dos dentes decíduos. As resinas Charisma e Filtek Z250 apresentaram melhor desempenho em relação ao manchamento superficial do que a Filtek P60. Os dois métodos de avaliação clínica podem ser utilizados para avaliação de restaurações em dentes decíduos, sendo o método FDI mais completo e promissor.

The composite resins have been widely used in Pediatric Dentistry, because they preserve the health dental structure, are more esthetics and their abrasion levei is similar that of the deciduous teeth. Objectives: to evaluate the behavior and the longevity of the composite resins fillings in posterior deciduous teeth using the USPHS and FDI methods. Materiais and methods: 09 children were selected who had 34 restorations (occlusal and occlusoproximal) in primary molars performed by undergraduate students of Lutheran University of Brazil Cachoeira do Sul/RS with Charisma®, Filtekl P60, Filtekl Z250 XT composite resins). The restorations were evaluated by an examiner blinded to the study objectives, through USPHS and FDI methods criteria. Statistical analysis was performed by the Kruskal-Wallis test, with the significance level set at 5%. Results: the 3 composite resins did not show any difference regarding to majority of criteria employed in the two methods. For the superficial staining criterion there was statistically significant difference among the composite resins (p=0,OO6), being Filtek P60 the resin that showed worst superficial staining than Charisma and Filtek Z250. Conclusions: the composite resins evaluated were satisfactory and available to fill deciduous teeth. lhe composite resins Charisma and Filtek Z250 showed better performance than Filtek P60 in relation to superficial staining criterion. The two evaluation methods can be used to evaluate restorative procedures in deciduous teeth, being FOI method the most complete and promising though.

Color stability of repaired composite submitted to accelerated artificial aging.

The aim of this study was to evaluate the color stability (ΔE) of nanoparticulate composite, with consideration for the type of surface treatment performed before repair. A Teflon matrix was used to fabricate 50 test specimens from composite. After initial color readout, the specimens were submitted to 100 hours of accelerated artificial aging (AAA). The samples were divided into five groups (n = 10), according to the surface treatment performed: sandblasting with aluminum oxide powder, phosphoric acid, and an adhesive system (Group 1); sandblasting with aluminum oxide powder, phosphoric acid, and a flowable composite (Group 2); abrasion with a diamond bur, phosphoric acid, and an adhesive system (Group 3); abrasion with a diamond bur, phosphoric acid, and a nanoparticulate composite (Group 4); and a control group (Group 5). After repair, a new color readout was taken, the test specimens were submitted to a new AAA cycle (300 hours), and the final color readout was taken. Comparison of the ΔE means (one-way ANOVA and Tukey tests, p < 0.05) demonstrated no statistically significant differences among the groups (p > 0.05) after 100 hours of AAA. After repair, Group 1 (4.61 ± 2.03) presented the highest color alteration with a statistically significant difference compared with the other groups (p < 0.05). After 300 hours, Group 4 specimens (13.84 ± 0.71) presented the lowest color alteration in comparison with the other groups, with a statistically significant difference (p < 0.05). It was concluded that the repair performed in Group 4 provided greater esthetic recovery, made possible by the regression in the ΔE values of the restorations after repair, and less color alteration of the restorations over the course of time.

Repair of dimethacrylate-based composite restorations by a silorane-based composite: a one-year randomized clinical trial.

PURPOSE: To investigate clinical performance of a low-shrinkage silorane-based composite resin when used for repairing conventional dimethacrylate-based composite restorations. BACKGROUND: Despite the continued development of resin-based materials, polymerization shrinkage and shrinkage stress still require improvement. A silorane-based monomer system was recently made available for dental restorations. This report refers to the use of this material for making repairs and evaluates the clinical performance of this alternative treatment. MATERIALS AND METHODS: One operator repaired the defective dimethacrylate-based composite resin restorations that were randomly assigned to one of two treatment groups: control (n=50) repair with Adper SE Plus (3M/ESPE) and Filtek P60 Posterior Restorative (3M/ESPE), and test (n=50) repair with P90 System Adhesive Self-Etch Primer and Bond (3M/ESPE) and Filtek P90 Low Shrink Posterior Restorative (3M/ESPE). After one week, restorations were finished and polished. Two calibrated examiners (Kw≥0.78) evaluated all repaired restorations, blindly and independently, at baseline and one year. The parameters examined were marginal adaptation, anatomic form, surface roughness, marginal discoloration, postoperative sensitivity, and secondary caries. The restorations were classified as Alpha, Bravo, or Charlie, according to modified US Public Health Service criteria. Mann-Whitney and Wilcoxon tests were used to compare the groups. RESULTS: Of the 100 restorations repaired in this study, 93 were reexamined at baseline. Dropout from baseline to one-year recall was 11%. No statistically significant differences were found between the materials for all clinical criteria, at baseline or at one-year recall (p>0.05). No statistically significant differences were registered (p>0.05) for each material when compared for all clinical criteria at baseline and at one-year recall. CONCLUSIONS: The hypothesis tested in this randomized controlled clinical trial was accepted. After the one-year evaluations, the silorane-based composite exhibited a similar performance compared with dimethacrylate-based composite when used to make repairs.

Effects of different surface treatments and accelerated artificial aging on the bond strength of composite resin repairs.

The purpose of the present study was to assess the bond strength of composite resin repairs subjected to different surface treatments and accelerated artificial aging. 192 cylindrical samples (CSs) were prepared and divided into 24 groups (n = 8). Half of the CSs were stored in water for 24 h, and the other half were subjected to C-UV accelerated aging for non-metallic specimens. The treatments were phosphoric acid + silane + adhesive (PSA); phosphoric acid + adhesive (PA); diamond bur + phosphoric acid + silane + adhesive (DPSA); diamond bur + phosphoric acid + adhesive (DPA); air abrasion + phosphoric acid + silane + adhesive (APSA); and air abrasion + phosphoric acid + adhesive (APA). The repair was performed and the specimens were again aged as described above. A control group (n = 8) was established and did not receive any type of aging or surface treatment. The specimens were loaded to failure in shear mode with a crosshead speed of 0.5 mm/min until fracture. Data were analyzed by one-way ANOVA/Tukey's test (p < 0.05). No statistically significant differences were found among DPSA, DPA, APSA, APA, and the control group. The aged PSA and PA achieved low bonding values and were statistically different from the control group, whereas the non-aged PSA and PA presented no statistically significant difference from the control group. Repairs with the proposed surface treatments were viable on both recent and aged restorations; however, phosphoric acid + adhesive alone were effective only on recent restorations.

Effects of different surface treatments and accelerated artificial aging on the bond strength of composite resin repairs

The purpose of the present study was to assess the bond strength of composite resin repairs subjected to different surface treatments and accelerated artificial aging. 192 cylindrical samples (CSs) were prepared and divided into 24 groups (n = 8). Half of the CSs were stored in water for 24 h, and the other half were subjected to C-UV accelerated aging for non-metallic specimens. The treatments were phosphoric acid + silane + adhesive (PSA); phosphoric acid + adhesive (PA); diamond bur + phosphoric acid + silane + adhesive (DPSA); diamond bur + phosphoric acid + adhesive (DPA); air abrasion + phosphoric acid + silane + adhesive (APSA); and air abrasion + phosphoric acid + adhesive (APA). The repair was performed and the specimens were again aged as described above. A control group (n = 8) was established and did not receive any type of aging or surface treatment. The specimens were loaded to failure in shear mode with a crosshead speed of 0.5 mm/min until fracture. Data were analyzed by one-way ANOVA/Tukey's test (p < 0.05). No statistically significant differences were found among DPSA, DPA, APSA, APA, and the control group. The aged PSA and PA achieved low bonding values and were statistically different from the control group, whereas the non-aged PSA and PA presented no statistically significant difference from the control group. Repairs with the proposed surface treatments were viable on both recent and aged restorations; however, phosphoric acid + adhesive alone were effective only on recent restorations.