Release behavior and mechanism of uranium and thorium from Ta-Nb tailings under simulated rainfall in Jiangxi Province, China.

Tantalum-niobium ore belongs to associated radioactive ore, which is accompanied by a certain amount of radioactive uranium and thorium. The remaining slag is enriched with a large number of radionuclides; after weathering, natural rainfall, and surface water scouring, radioactive elements such as uranium, thorium, and some heavy metal elements are exposed or washed into the soil, which poses a threat to the ecological environment and human health. In this study, for characterization analysis during, before, and after leaching, dynamic simulation experiment was carried out on a Ta-Nb slag sample in Jiangxi, China. From SEM analysis, the soluble substances adsorbed on the slag surface dissolve into the solution after leaching in simulated rainfall, and the remained slag becomes smooth with different particle sizes. The XRD diffraction analysis of the sample showed that after leaching in simulated rainfall, the existing forms of elements are different. pH of the leachate of Ta-Nb slag is 1.79; Ta-Nb slag contains many rare metal elements, nonmetal elements, radioactive elements, and some salt compounds; and the content of thorium is higher than that of uranium by EDS analysis. The release of uranium and thorium is obviously affected by the amount of leachate and pH. Under the lower pH of leaching solution, the release of uranium and thorium is more effective. The results of Fick diffusion theory and Elovich equation show that the release and migration mode of uranium and thorium in Ta-Nb slag are mainly surface elution; under acidic conditions, the release and migration of uranium and thorium are faster. This study provides basic data and scientific information for solving the key problems of pollution control of associated radioactive waste in environmental protection.

[Determination of tantalum and tantalum pentoxide in the air of workplace by inductively coupled plasma optical emission spectrometry].

Objective: To establish the method for determination of tantalum and tantalum pentoxide in the air of workplace by inductively coupled plasma optical emission spectrometry (ICP-OES). Methods: The tantalum and tantalum pentoxide in the workplace air were collected by filter membrane and then digested by microwave digestion apparatus in the mixed solvents (HNO(3)∶HF=3∶1) ,diluted to 50 ml and detected by ICP- OES. Results: The linearity of tantalum was good at the range of 0.0~100.0 µg/ml with a correlation coefficient of 0.9997, the LOD and LOQ were 0.04 µg/ml and 0.14 µg/ml, respectively. The recovery was ranged from 83.1%-87.8%; the RSD of intra-and inter-batch precision were 0.2%-1.0% and 1.1%-2.4%, respectively. The recovery was ranged from 87.4%-93.3%; the RSD of intra-and inter-batch precision were 0.5%-1.5% and 1.3%- 1.8%, respectively. Conclusion: The determination method meet the requirement of analysis and apply to the determination of tantalum and tantalum pentoxide in the air of workplace.

In vivo measurement of pre-operational spallation source workers: baseline body burden levels and detection limits of relevant gamma emitters using high-resolution gamma spectrometry.

As a measure to prepare for long-term internal dose monitoring of workers at the European Spallation Source (ESS) in Lund, Sweden, operated by the European Research Infrastructure Consortium (ERIC), as well as to enhance emergency preparedness against accidental releases, a series of in vivo measurements were conducted using a high-resolution HPGe detector with a 123% relative efficiency (1.332 MeV). This study describes the whole-body counting set-up, calibration procedure, and subsequent validation measurements using conventional NaI(Tl)-scanning-bed geometry on a selection of workers from the ESS. Detection limits for the relevant gamma emitters 7Be, 172Hf, and 182Ta were determined to be 65 Bq, 130 Bq, and 22 Bq, respectively, using a 2400 s acquisition time. The baseline measurements suggest that care must be taken to ensure that the fluctuations in the presence of radon daughters 214Bi and 214Pb are minimised by, for example, ensuring a minimum air exchange between the measuring room and the ambient air, and by demanding that the measured subjects change clothes and shower before measurement. Furthermore, in a monitoring program for internal doses to spallation source workers, the presence of radionuclides originating from non-work-related sources (such as 226Ra from private water wells or 137Cs from intakes of Chernobyl contaminated foodstuffs), or radionuclides from previous work history (such as 60Co within the nuclear power industry), must be considered.

Study of worker's exposure to Tantalum-bearing particles in a mining and metallurgical plant.

The objective of this study was to assess worker exposure to mineral dust particles, and a metabolic model, based on the model adopted by ICRP, was applied to assess human exposure to Ta, and predicted values of Ta concentrations in excreta. The occupational exposure to Th, U, Nb, and Ta-bearing particles during routine tasks to obtain Fe-Nb alloys was estimated using air samplers and excreta samples. Ta concentrations in food samples and in drinking water were also determined. The results support that workers were occupationally exposed to Ta-bearing particles, and also indicate that a source of Ta exposure for both workers and the control group was the ingestion of drinking water containing soluble compounds of Ta. Therefore, some Ta compounds should be considered soluble compounds in gastrointestinal tract. Consequently, the metabolic model based on ICRP metabolic model and/or the transfer factor f 1 for Ta should be reviewed and the solubility of Ta compounds in gastrointestinal should be determined.

Dispersion and solubility of In, Tl, Ta and Nb in the aquatic environment and intertidal sediments of the Scheldt estuary (Flanders, Belgium).

Certain specialty elements are indispensable in modern technologies for their particular properties. Yet, potential risks associated to the release of these elements at any stage, remains unknown. Therefore, the dispersion of indium (In), thallium (Tl), tantalum (Ta) and niobium (Nb) in the aquatic environment of the Scheldt estuary (Flanders, Belgium) was studied. Maximum concentrations in intertidal sediments of 101 ± 15 µg kg-1 for In, 481 ± 37 µg kg-1 for Tl, 88 ± 19 µg kg-1 for Ta and 1162 ± 4 µg kg-1 for Nb appeared on the sampling location closest to the river mouth, i.e. 57.5 km upstream. Their distribution in the intertidal sediments depends on the physicochemical sediment characteristics along the flow of the river Scheldt. The same was the case for most other metals and aluminum as their occurrence also correlated (p < 0.05) with the occurrence of In, Tl and Nb. While in general, studied elements correlate to the OM content and sulfur and phosphorus herein included, a relative enrichment of In, Tl and Nb was seen at Rupelmonde (92.0 km from the river mouth). Mainly the intertidal sediment silt fraction is capable of retaining the elements by exchanging with other ions in the mineral interlayer. Increasing salinity towards the river mouth can furthermore induce the formation of insoluble chloride species. Overall, the solubility of In, Tl, Ta and Nb appeared extremely low upon extraction of pore water from intertidal sediments saturated to 100% field capacity.

Interinstrumental transfer of a fast short-end injection capillary electrophoresis method: Application to the separation of niobium, tantalum, and their substituted ions.

The interinstrumental transfer of a short-end CE method was studied. A model separation of the hexameric forms of niobium, tantalum, and their substituted ions (Nb6-x Tax with 0 ≤ x ≤ 6) was selected as test case. The method was first optimized on a Beckman instrument and in a second step transferred to an Agilent instrument. The transfer needed updated guidelines that tackled differences in effective capillary length, 8.5 (Agilent) versus 10 cm (Beckman), because of instrumental different capillary cartridges. Differences in effective length lead to migration time and separation efficiency inequalities, illustrated by a decrease in resolution between the substituted ions. The difference in effective length was overcome by adapting the lift offset parameter of the Agilent instrument. The lift offset default setting is 4 mm and by increasing this parameter both the inlet and outlet lifts are lowered and thus the detection window can be displaced and consequently the effective length was increased. The decrease in effective length difference and the effect on the separation efficiency was investigated and led finally to a restored separation of the substituted ions. The adaptation of the lift offset parameter during short-end injection methods was added to earlier developed guidelines to facilitate interinstrumental method transfer of CE methods.

Magnetic resonance safety and compatibility of tantalum markers used in proton beam therapy for intraocular tumors: A 7.0 Tesla study.

PURPOSE: Proton radiation therapy (PRT) is a standard treatment of uveal melanoma. PRT patients undergo implantation of ocular tantalum markers (OTMs) for treatment planning. Ultra-high-field MRI is a promising technique for 3D tumor visualization and PRT planning. This work examines MR safety and compatibility of OTMs at 7.0 Tesla. METHODS: MR safety assessment included deflection angle measurements (DAMs), electromagnetic field (EMF) simulations for specific absorption rate (SAR) estimation, and temperature simulations for examining radiofrequency heating using a bow-tie dipole antenna for transmission. MR compatibility was assessed by susceptibility artifacts in agarose, ex vivo pig eyes, and in an ex vivo tumor eye using gradient echo and fast spin-echo imaging. RESULTS: DAM (α < 1 °) demonstrated no risk attributed to magnetically induced OTM deflection. EMF simulations showed that an OTM can be approximated by a disk, demonstrated the need for averaging masses of mave = 0.01 g to accommodate the OTM, and provided SAR0.01g,maximum = 2.64 W/kg (Pin = 1W) in OTM presence. A transfer function was derived, enabling SAR0.01g estimation for individual patient scenarios without the OTM being integrated. Thermal simulations revealed minor OTM-related temperature increase (δT < 15 mK). Susceptibility artifact size (<8 mm) and location suggest no restrictions for MRI of the nervus opticus. CONCLUSION: OTMs are not a per se contraindication for MRI. Magn Reson Med 78:1533-1546, 2017. © 2016 International Society for Magnetic Resonance in Medicine.

Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti-6Al-4V.

Tantalum pentoxide nanotubes (Ta2O5 NTs) can dramatically raise the biological functions of different kinds of cells, thus have promising applications in biomedical fields. In this study, Ta2O5 NTs were prepared on biomedical grade Ti-6Al-4V alloy (Ti64) via physical vapor deposition (PVD) and a successive two-step anodization in H2SO4: HF (99:1)+5% EG electrolyte at a constant potential of 15V. To improve the adhesion of nanotubular array coating on Ti64, heat treatment was carried out at 450°C for 1h under atmospheric pressure with a heating/cooling rate of 1°Cmin-1. The surface topography and composition of the nanostructured coatings were examined by atomic force microscopy (AFM) and X-ray electron spectroscopy (XPS), to gather information about the corrosion behavior, wear resistance and bioactivity in simulated body fluids (SBF). From the nanoindentation experiments, the Young's modulus and hardness of the 5min anodized sample were ~ 135 and 6GPa, but increased to ~ 160 and 7.5GPa, respectively, after annealing at 450°C. It was shown that the corrosion resistance of Ti64 plates with nanotubular surface modification was higher than that of the bare substrate, where the 450°C annealed specimen revealed the highest corrosion protection efficiency (99%). Results from the SBF tests showed that a bone-like apatite layer was formed on nanotubular array coating, as early as the first day of immersion in simulated body fluid (SBF), indicating the importance of nanotubular configuration on the in-vitro bioactivity.

Development of a capillary electrophoresis method for the analysis in alkaline media as polyoxoanions of two strategic metals: Niobium and tantalum.

Tantalum (Ta) and niobium (Nb) are two strategic metals essential to several key sectors, like the aerospace, gas and oil, nuclear and electronic industries, but their separation is really difficult due to their almost identical chemical properties. Whereas they are currently produced by hydrometallurgical processes using fluoride-based solutions, efforts are being made to develop cleaner processes by replacing the fluoride media by alkaline ones. However, methods to analyze Nb and Ta simultaneously in alkaline samples are lacking. In this work, we developed a capillary zone electrophoresis (CE) method able to separate and quantify Nb and Ta directly in alkaline media. This method takes advantage of the hexaniobate and hexatantalate ions which are naturally formed at pH>9 and absorb in the UV domain. First, the detection conditions, the background electrolyte (BGE) pH, the nature of the BGE co-ion and the internal standard (IS) were optimized by a systematic approach. As the BGE counter-ion nature modified the speciation of both ions, sodium- and lithium-based BGE were tested. For each alkaline cation, the BGE ionic strength and separation temperature were optimized using experimental designs. Since changes in the migration order of IS, Nb and Ta were observed within the experimental domain, the resolution was not a monotonic function of ionic strength and separation temperature. This forced us to develop an original data treatment for the prediction of the optimum separation conditions. Depending on the consideration of either peak widths or peak symmetries, with or without additional robustness constraints, four optima were predicted for each tested alkaline cation. The eight predicted optima were tested experimentally and the best experimental optimum was selected considering analysis time, resolution and robustness. The best separation was obtained at 31.0°C and in a BGE containing 10mM LiOH and 35mM LiCH3COO.The separation voltage was finally optimized, resulting in the separation of Nb, Ta, and IS in less than 2.5min, which is three times faster than any CE method ever reported for the separation of Nb and Ta (acidic media included). Some figures of merit of the method were determined such as linearity ranges and limits of quantitation. Finally, the method was successfully applied to the analysis of a real industrial sample.

Conflict minerals in the compute sector: estimating extent of tin, tantalum, tungsten, and gold use in ICT products.

Recent legislation has focused attention on the supply chains of tin, tungsten, tantalum, and gold (3TG), specifically those originating from the eastern part of the Democratic Republic of Congo. The unique properties of these so-called "conflict minerals" lead to their use in many products, ranging from medical devices to industrial cutting tools. This paper calculates per product use of 3TG in several information, communication, and technology (ICT) products such as desktops, servers, laptops, smart phones, and tablets. By scaling up individual product estimates to global shipment figures, this work estimates the influence of the ICT sector on 3TG mining in covered countries. The model estimates the upper bound of tin, tungsten, tantalum, and gold use within ICT products to be 2%, 0.1%, 15%, and 3% of the 2013 market share, respectively. This result is projected into the future (2018) based on the anticipated increase in ICT device production.

Compton profile study and electronic properties of tantalum diboride.

We have reported the first-ever experimental Compton profile (CP) of TaB2 using 20 Ci(137)Cs Compton spectrometer. To compare the experimental data, we have also computed the theoretical CPs using density functional theory (DFT) and hybridization of DFT and Hartree-Fock (HF) within linear combination of the atomic orbitals (LCAO) method. In addition, we have reported energy bands and density of states of TaB2 using LCAO and full potential-linearized augmented plane wave (FP-LAPW) methods. A real space analysis of CP of TaB2 confirms its metallic character which is in tune with the cross-overs of Fermi level by energy bands and Fermi surface topology. A comparison of equal-valence-electron-density (EVED) experimental profiles of isoelectronic TaB2 and NbB2 show more covalent (or less ionic) character of TaB2 than that of NbB2 which is in agreement with available ionicity data.

Natural radionuclide concentrations in processed materials from Thai mineral industries.

The naturally occurring radioactive materials (NORMs) distributed in products, by-products and waste produced from Thai mineral industries were investigated. Samples were analysed for radioactivity concentrations of two principal NORM isotopes: (226)Ra and (228)Ra. The enrichment of NORM was found to occur during the treatment process of some minerals. The highest activity of (226)Ra (7 × 10(7) Bq kg(-1)) was in the scale from tantalum processing. The radium concentration in the discarded by-product material from metal ore dressing was also enriched by 3-10 times. Phosphogypsum, a waste produced from the production of phosphate fertilisers, contained 700 times the level of (226)Ra concentration found in phosphate ore. Hence, these residues were also sources of exposure to workers and the public, which needed to be controlled.

Analysis of tantalum implants used for avascular necrosis of the femoral head: a review of five retrieved specimens.

AIM: The effective results shown in the porous systems of tantalum employed for the use of osseointegrates has been demonstrated by means of animal experimentation. However, there is a total lack of any research studies on the osseointegration of tantalum implants from retrieval of the same after a period of time whereby the material had been implanted within the human body. MATERIALS AND METHODS: For this study, five rod implants used for the treatment of avascular necrosis of the femoral head were retrieved following collapse of the femoral head and conversion to total hip arthroplasty. The time of implantation ranged between six weeks and twenty months. RESULTS: Observation during this study has confirmed the effectiveness of osseointegration within this period of time. New bone was observed around and within the porous system of the on rod devices at retrieval date. The bone ingrowth, however, proved to be slower and less intense than that resulting within animal species during the first few months after implantation. CONCLUSIONS: Nevertheless, the results obtained in the quantitative assessment of this process proved to be similar to those results achieved by other authors in previous experimental work studies.

Search for the radioactivity of 180mTa using an underground HPGe sandwich spectrometer.

The radioactivity of (180m)Ta has never been detected. The present attempt to detect it was carried out using a newly developed HPGe sandwich spectrometer installed 500m water equivalent underground in the HADES laboratory. The sample consisted of 6 discs of tantalum of natural isotopic composition with a total mass of 1500 g and a total mass for (180)Ta of 180 mg. The sample was measured for 68 days and the resulting lower bound for the half-life of (180m)Ta was 2.0 x 10(16)y, which is a factor of 2.8 higher than the previous highest value.

Occupational radiation exposures of artisans mining columbite-tantalite in the eastern Democratic Republic of Congo.

Artisans in Masisi and other parts of the North Kivu province in the eastern Democratic Republic of Congo (DRC) mine columbite-tantalite mineral ores (also called 'coltan') for the tantalum content. The potential occupational radiation exposures in the course of this operation, due to the presence of naturally occurring radioactive material (NORM), have been investigated in this screening survey. Activity concentrations of the naturally occurring radionuclides in samples of coltan were measured using gamma-ray spectrometry. The average values in Bq g(-1) are 10.75 +/- 5.11 for (238)U, 7.06 +/- 3.39 for (226)Ra, 1.75 +/- 0.85 for (232)Th, and 1.63 +/- 0.52 for (40)K. Based on these values and the working scenarios involved in artisanal coltan mining, the occupational doses that may accrue from a variety of exposure pathways were determined by model calculations. The results, assuming conservative dust load and dilution factors, indicate that grinding and sieving coltan can give rise to high occupational doses, up to 18 mSv per annum on average.

TaSi2 nanowires: A potential field emitter and interconnect.

TaSi2 nanowires have been synthesized on a Si substrate by annealing NiSi2 films at 950 degrees C in an ambient containing Ta vapor. The nanowires could be grown up to 13 microm in length. Field-emission measurements show that the turn-on field is low at 4-4.5 V/microm and the threshold field is down to 6 V/microm with the field enhancement factor as high as 1800. The metallic TaSi2 nanowires exhibit excellent electrical properties with a remarkable high failure current density of 3 x 10(8) A cm(-2). In addition, effects of annealing temperatures and capability of metal silicide mediation layer on the growth of nanowires are addressed. This simple approach promises future applications in nanoelectronics and nano-optoelectronics.

(23)Na multiple-quantum MAS NMR of the perovskites NaNbO(3) and NaTaO(3).

The distorted perovskites NaTaO(3) and NaNbO(3) have been studied using (23)Na multiple-quantum (MQ) MAS NMR. NaTaO(3) was prepared by high temperature solid state synthesis and the NMR spectra are consistent with the expected room temperature structure of the material (space group Pbnm), with a single crystallographic sodium site. Two samples of NaNbO(3) were studied. The first, a commercially available sample which was annealed at 900 degrees C, showed two crystallographic sodium sites, as expected for the room temperature structure of the material (space group Pbcm). The second sample, prepared by a low temperature hydrothermal method, showed the presence of four sodium sites, two of which match the expected room temperature structure and the second pair, another polymorph of the material (space group P21ma). This is consistent with powder X-ray diffraction data which showed weak extra peaks which can be accounted for by the presence of this second polymorph. Density functional theory (DFT) calculations support our conclusions, and aid assignment of the NMR spectra. Finally, we discuss the measured NMR parameters in relation to other studies of sodium in high coordination sites in the solid state.

Proton-exchanged 36 degrees Y-X LiTaO3 waveguides for surface acoustic wave.

A nontoxic proton source, octanoic acid, was adopted to fabricate proton-exchanged (PE) waveguides in 36 degrees Y-X lithium tantalate (LiTaO3) substrates. The PE ability of octanoic acid on LiTaO3, the penetration depth, was investigated by secondary-ion mass spectrometry (SIMS). The penetration depth of hydrogen ion exhibited an obviously step-like profile, which will be excellent for waveguide application. The relationship between waveguide depth (d) and exchanging time (t) was represented by d = 0.0653 X square root of t at T = 200 degrees C. To deserve to be mentioned, the octanoic acid has a slight dissociation coefficient and low activation energy, thus the accurate waveguide depth control can be obtained. For the application of acoustic wave guided acousto-optic devices, the leaky surface acoustic wave (LSAW) properties of PE 36 degrees Y-X LiTaO3 waveguides were investigated. The phase velocity slightly decreased with the increase of kd, where k was wavenumber. An indispensable parameter of acoustic wave device, the temperature coefficient of frequency (TCF), calculated from the frequency change of the output of LSAW delay line showed an increase with increased kd.

Effect of surface treatments on anodic oxide film growth and electrochemical properties of tantalum used for biomedical applications.

Self-expandable nitinol (nickel-titanium) alloys and 316L stainless steel are the most commonly used materials in the production of coronary stents. However, tantalum (Ta) has already been used to make stents for endovascular surgery and may constitute an alternative to other materials because of its better electrochemical performance, namely its higher corrosion resistance, as well as its radio-opacity. The characterization of wet polished, chemically polished, wet polished anodized, and chemically polished anodized Ta electrodes has been performed in a 0.15 M NaCl solution (simulated body fluid) using Ucorr = f(t) measurements, anodic polarizations, capacity measurements, anodic oxidations, and atomic force microscopy (AFM) imaging. Anodic polarization curves have shown that the abnormal current density peak with a maximum value around 1.65 V (critical applied potential, Uc) disappeared for the anodized electrodes indicating a probable relationship between the surface states and the film growth. These results are confirmed by capacity measurements. The behavior of wet polished and chemically polished electrodes during anodic oxidations seemingly indicated that for these particular treatments the film growth is different. The AFM images and roughness measurements have shown that chemical polishing produced smoother electrodes, a fact probably related to the differences in film growth.

Fast simultaneous determination of niobium and tantalum by Kalman Filter analysis with flow injection chemiluminescence method.

A fast and highly efficient Kalman Filter analysis-flow injection chemiluminescence (FI-CL) method was developed to simultaneously determine trace amounts of niobium and tantalum in geological samples. The method, without the boring process of separation and dear instruments, is suitable for field scene analysis. The mixed chemiluminescence kinetic curve was analyzed by a Kalman Filter (KF) in this method to realize the simultaneous determination of niobium and tantalum. Possible interference elements in the determination were investigated. Under the selected conditions, the detection limits (3sigma, n = 11) of niobium(V) and tantalum(V) were 2.1 x 10(-3) microg g(-1) and 4.0 x 10(-3) microg g(-1), respectively, and the relative standard deviations were 4.9% and 3.3% (n = 9). The method was applied to the determination of niobium and tantalum in geological samples with satisfactory results.