Improved Methods for Fourier-Based Microwave Imaging.

Fourier-based imaging has been widely adopted for microwave imaging thanks to its efficiency in terms of computational complexity without compromising image resolution. Together with other backpropagation imaging algorithms like delay-and-sum (DAS), they are based on a far-field approach to the electromagnetic expression relating to fields and sources. To improve the accuracy of these techniques, this contribution presents a modified version of the well-known Fourier-based algorithm by taking into account the field radiated by the Tx/Rx antennas of the microwave imaging system. The impact on the imaged targets is discussed, providing a quantitative and qualitative analysis. The performance of the proposed method for subsampled microwave imaging scenarios is compared against other well-known aliasing mitigation methods.

A Portable Electromagnetic System Based on mm-Wave Radars and GNSS-RTK Solutions for 3D Scanning of Large Material Piles.

In this paper, a portable three-dimensional (3D) scanning system for the accurate characterization of large raw material (e.g., cereal grain, coal, etc.) stockpiles is presented. The system comprises an array of high resolution millimeter-wave radars and a cm-level accuracy positioning system to accurately characterize large stockpiles by means of a high-resolution 3D map, making it suitable for automation purposes. A control unit manages the data received by the sensors, which are sent to a computer system for processing. As a proof of concept, the entire sensor system is evaluated in a real environment for electromagnetically scan a scaled stockpile of coal, used in the industry for handling raw materials. In addition, a highly efficient processing adaptive algorithm that may reconstruct the scanned structure in real-time has been introduced, enabling continuous dynamic updating of the information. Results are compared with those from a photogrammetry-like technique, revealing an excellent agreement.

Comment on the Article "A Lightweight and Low-Power UAV-Borne Ground Penetrating Radar Design for Landmine Detection".

This reply aims to correct some incomplete/incorrect information provided in the article "A Lightweight and Low-Power UAV-Borne Ground Penetrating Radar Design for Landmine Detection", when the authors compare their results with some state-of-the-art contributions.

Dual-Probe Near-Field Phaseless Antenna Measurement System on Board a UAV.

On-site antenna measurement has been recently attracting an increasing interest in order to assess the antenna performance in real operational environments. The complexity and cost of these kind of measurements have been significantly cut down due to recent developments in unmanned aerial vehicles' (UAVs) hardware and antenna measurement post-processing techniques. In particular, the introduction of positioning and geo-referring subsystems capable of providing centimeter-level accuracy together with the use of phase retrieval techniques and near-field to far-field transformation algorithms, have enabled near field measurements using UAVs. This contribution presents an improved UAV-based on-site antenna measurement system. On the one hand, the simultaneous acquisition on two measurement surfaces has been introduced and calibrated properly, thus reducing geo-referring uncertainties and flight time. On the other hand, the positioning and geo-referring subsystem has been enhanced by means of a dual-band real time kinematics (RTK) unit. The system capabilities were validated by measuring an offset reflector antenna, and the results were compared with the measurements at the spherical range in the anechoic chamber and with the measurements collected with a previous version of the implemented system.

RFID Technology for Management and Tracking: e-Health Applications.

Radio frequency identification (RFID) has become a key technology in the logistics and management industry, thanks to distinctive features such as the low cost of RFID tags, and the easiness of the RFID tags' deployment and integration within the items to be tracked. In consequence, RFID plays a fundamental role in the so-called digital factory or 4.0 Industry, aiming to increase the level of automatization of industrial processes. In addition, RFID has also been found to be of great help in improving the tracking of patients, medicines, and medical assets in hospitals, where the digitalization of these operations improves their efficiency and safety. This contribution reviews the state-of-the-art of RFID for e-Health applications, describing the contributions to improve medical services and discussing the limitations. In particular, it has been found that a lot of effort has been put into software development, but in most of the cases a detailed study of the physical layer (that is, the characterization of the RFID signals within the area where the system is deployed) is not properly conducted. This contribution describes a basic RFID system for tracking and managing assets in hospitals, aiming to provide additional details about implementation aspects that must be considered to ensure proper functionality of the system. Although the scope of the RFID system described in this contribution is restricted to a small area of the hospital, the architecture is fully scalable to cover the needs of the different medical services in the hospital. Ultra high-frequency (UHF) RFID technology is selected over the most extended near-field communication (NFC) and high-frequency (HF) RFID technology to minimize hardware infrastructure. In particular, UHF RFID also makes the coverage/reading area conformation easier by using different kinds of antennas. Information is stored in a database, which is accessed from end-user mobile devices (tablets, smartphones) where the position and status of the assets to be tracked are displayed.