Historical records of mercury deposition in dated sediment cores reveal the impacts of the legacy and present-day human activities in Todos os Santos Bay, Northeast Brazil.

We determined depth profiles of total mercury (T-Hg) in six 210Pb-dated sediment cores from Todos os Santos Bay to reconstruct the history of anthropogenic Hg accumulation. We also assessed superficial sediments samples from five estuaries. T-Hg concentrations (5-3500 µg kg-1) presented a large spatial and temporal variability. T-Hg concentrations in Ribeira Bay increased up to 200-fold along time, whereas the fluxes of T-Hg are substantially higher (up to 10,000 fold) than present-day wet deposition for industrialized areas. Sedimentary records indicate that a chlor-alkali plant has been the main source of Hg pollution until the present, although the T-Hg records suggest that harbor, shrimp farming, and oil refinery activities, besides Hg atmospheric depositions, are important across the bay. Sediments in the Ribeira Bay act as an important Hg sink. If sediments are eroded or disturbed, they may release Hg, thus posing a serious risk to wildlife and ecosystem health. CAPSULE: Sedimentary cores provide data on preindustrial levels and also anthropogenic fluxes of Hg for the appraisal of the magnitude, processes and potential risks of the contamination.

Investigation of different chemical modifiers based on the Pd/Mg mixture for the determination of sulfur in shale oil by high-resolution continuum source graphite furnace molecular absorption spectrometry.

This study investigated different combinations of Pd/Mg, as chemical modifier, for sulfur determination, via CS molecule, in shale oil samples by high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS GF MAS). It was evaluated the mixture Pd/Mg in aqueous solution, Pd/Mg in propan-1-ol and the Pd/Mg in propan-1-ol plus Ru as a permanent modifier. The best sensitivity was achieved with Pd/Mg mixture in propan-1-ol. The high solubility of the samples in propan-1-ol promotes a better interaction with the modifier and, consequently, a more efficient thermal stability of the CS molecules. Due to the high sulfur content in the samples, the analytical line at 258.288 nm was used. Only a minimum sample preparation was required, i.e., a dilution in propan-1-ol by a factor of 1:10 (w/w). Temperatures of 800 °C and 2200 °C were the optimized conditions for pyrolysis and vaporization, respectively. The calibration curve was constructed with l-cysteine aqueous standard solutions. The characteristic mass was 27 ng; detection and quantification limits were 0.012% (w/w) and 0.039% (w/w), respectively. The accuracy of the proposed method was confirmed by the statistical agreement (Student's and Welch's t-test at 95% confidence level) using the certified reference material CRM NIST 1084a and an OTE oil sample whose sulfur content was previously determined by the standard method ASTM D4294. The method was successfully applied in three shale oil samples. The sulfur content in the investigated samples ranged from 1.0% (w/w) to 1.3% (w/w).

Avaliação nutritiva da silagem de cártamo, produção de biomassa, grãos e óleo / Nutritional evaluation of safflower silage and biomass, seed and oil production

Objetivou-se avaliar o valor nutritivo da biomassa de cártamo (Carthamus tinctorium L) submetida à ensilagem em três tratamentos. Foi realizado um ensaio de digestibilidade aparente dos nutrientes com ovinos e determinada a composição química e a digestibilidade in vitro da matéria seca (MS) na biomassa e nas silagens obtidas. Também foram quantificadas as produções de MS, grãos e óleo por hectare da cultura do cártamo, sendo a produção de MS de 12,4±4,9 t/ha; grãos de 2,9±1,5 t/ha e a de óleo bruto de 0,7 ±0,2 t/ha. Os tratamentos aplicados à biomassa para ensilagem foram: CiN = cártamo ensilado in natura; CE= cártamo emurchecido (duas horas de exposição ao sol); CPC= cártamo + 5% polpa cítrica. A composição química das silagens nos tratamentos CiN, CE e CPC foi 10,80; 11,15 e 10,07% de proteína bruta (PB), 55,22; 55,40 e 52,20% de fibra em detergente neutro (FDN) e 55,60; 53,45 e 57,87% de digestibilidade in vitro da MS, respectivamente. O ensaio foi feito em delineamento em blocos completos casualizados, utilizando-se o peso dos animais como blocos. A digestibilidade aparente da MS das silagens foi 55,96; 55,54 e 57,94%, e de nutrientes digestíveis totais (NDT) de 57,62; 57,49; 57,87%, respectivamente para os tratamentos CiN, CE e CPC. Os resultados indicam que o cártamo conservado como silagem pode ser utilizado na dieta de ruminantes como alternativa a volumosos de qualidade, entretanto os tratamentos utilizados para a ensilagem da biomassa não apresentaram diferenças que justifiquem sua aplicação no que diz respeito às avaliações fisico-químicas, consumo e digestibilidade dos nutrientes das silagens...(AU)

The objective of this study was to evaluate the nutritional value of safflower biomass (Carthamus tinctorium L.) ensiled in three treatments. An apparent nutrient digestibility assay was conducted using sheep and the chemical composition and in vitro digestibility of dry matter (DM) were determined in the biomass and silages obtained. The production of DM, seeds and crude oil per hectare safflower crop was also quantified and was 12.4±4.9, 2.9±1.5 and 0.7 ±0.2 t/ha, respectively. The following ensiling treatments were applied: FS = freshly ensiled safflower; WS = wilted safflower (sun exposure for 2 hours); SCP = safflower + 5% citrus pulp. The chemical composition of the FS, WS and SCP silages, respectively, was 10.8, 11.15 and 10.07% crude protein, 55.22, 55.4 and 52.2% neutral detergent fiber, and 55.6, 53.45 and 57.87% in vitro DM digestibility. A randomized complete block design with animal weight as blocks was used. The apparent DM digestibility of the silages was 55.96, 55.54 and 57.94% and total digestible nutrients were 57.62, 57.49 and 57.87% for FS, WS and SCP, respectively. The results indicate the use of safflower conserved as silage in ruminant diets as an alternative to roughage. However, the biomass ensiling treatments showed no differences in terms of physicochemical parameters, intake or nutrient digestibility of the silages that would justify their application...(AU)

Avaliação nutritiva da silagem de cártamo, produção de biomassa, grãos e óleo / Nutritional evaluation of safflower silage and biomass, seed and oil production

Objetivou-se avaliar o valor nutritivo da biomassa de cártamo (Carthamus tinctorium L) submetida à ensilagem em três tratamentos. Foi realizado um ensaio de digestibilidade aparente dos nutrientes com ovinos e determinada a composição química e a digestibilidade in vitro da matéria seca (MS) na biomassa e nas silagens obtidas. Também foram quantificadas as produções de MS, grãos e óleo por hectare da cultura do cártamo, sendo a produção de MS de 12,4±4,9 t/ha; grãos de 2,9±1,5 t/ha e a de óleo bruto de 0,7 ±0,2 t/ha. Os tratamentos aplicados à biomassa para ensilagem foram: CiN = cártamo ensilado in natura; CE= cártamo emurchecido (duas horas de exposição ao sol); CPC= cártamo + 5% polpa cítrica. A composição química das silagens nos tratamentos CiN, CE e CPC foi 10,80; 11,15 e 10,07% de proteína bruta (PB), 55,22; 55,40 e 52,20% de fibra em detergente neutro (FDN) e 55,60; 53,45 e 57,87% de digestibilidade in vitro da MS, respectivamente. O ensaio foi feito em delineamento em blocos completos casualizados, utilizando-se o peso dos animais como blocos. A digestibilidade aparente da MS das silagens foi 55,96; 55,54 e 57,94%, e de nutrientes digestíveis totais (NDT) de 57,62; 57,49; 57,87%, respectivamente para os tratamentos CiN, CE e CPC. Os resultados indicam que o cártamo conservado como silagem pode ser utilizado na dieta de ruminantes como alternativa a volumosos de qualidade, entretanto os tratamentos utilizados para a ensilagem da biomassa não apresentaram diferenças que justifiquem sua aplicação no que diz respeito às avaliações fisico-químicas, consumo e digestibilidade dos nutrientes das silagens...

The objective of this study was to evaluate the nutritional value of safflower biomass (Carthamus tinctorium L.) ensiled in three treatments. An apparent nutrient digestibility assay was conducted using sheep and the chemical composition and in vitro digestibility of dry matter (DM) were determined in the biomass and silages obtained. The production of DM, seeds and crude oil per hectare safflower crop was also quantified and was 12.4±4.9, 2.9±1.5 and 0.7 ±0.2 t/ha, respectively. The following ensiling treatments were applied: FS = freshly ensiled safflower; WS = wilted safflower (sun exposure for 2 hours); SCP = safflower + 5% citrus pulp. The chemical composition of the FS, WS and SCP silages, respectively, was 10.8, 11.15 and 10.07% crude protein, 55.22, 55.4 and 52.2% neutral detergent fiber, and 55.6, 53.45 and 57.87% in vitro DM digestibility. A randomized complete block design with animal weight as blocks was used. The apparent DM digestibility of the silages was 55.96, 55.54 and 57.94% and total digestible nutrients were 57.62, 57.49 and 57.87% for FS, WS and SCP, respectively. The results indicate the use of safflower conserved as silage in ruminant diets as an alternative to roughage. However, the biomass ensiling treatments showed no differences in terms of physicochemical parameters, intake or nutrient digestibility of the silages that would justify their application...

Determination of aldehydes in fish by high-performance liquid chromatography.

A new analytical method to determine trace volatile aldehydes isolated from the headspace of fish meat at room temperature by high-performance liquid chromatography (HPLC) in the form of 2,4-dinitrophenylhydrazone (DNPHo) derivatives has been developed. Aliquots (50 g) of the fish purée were introduced into a 500-mL glass recipient and were purged with N2 for 40 min through two SEP-PAK C18 cartridges (connected in series) coated with an acid solution of 2,4-dinitrophenylhydrazine. The cartridges were then eluted with acetonitrile (2 mL) and the 2,4-DNPHo formed was quantitated by HPLC-UV analysis using a Zorbax C18 column. The isolated compounds from the dynamic headspace sampling of four kinds of fish species were saturated aldehydes, formaldehyde, acetaldehyde, propanal, butanal, pentanal, and hexanal. Under optimized conditions the detection limits of the HPLC method were in the range of 0.75 nmol/g (formaldehyde) to 2.19 nmol/g (hexanal). The calibration curves were linear in the concentration range from 1.3 nmol/mL to 12.5 nmol/mL. Propanal and acetaldehyde were the major carbonyl compounds identified (ranging from 3.9 nmol/g and 10 nmol/g). This study has revealed the widespread occurrence of formaldehyde, acetaldehyde, propanal, butanal, pentanal, and hexanal in fish meat.

Sampling techniques for the assessment of anthropogenic vapour and particulate mercury in the Brazilian Amazon atmosphere.

A system, based on annular gold-coated denuders, was optimized and used in the atmospheric sampling of mercury in urban and rural sites of the Alta Floresta, a region in the Brazilian Amazon. Results showed that vapour phase mercury (Hgv) is dominant in samples collected in both sites. However, particulate mercury (Hg) may sometimes be significant at the urban site, with values representing up to 77% of the total Hg collected during sampling, but may also be insignificant at the same site, depending on the gold commercialization activity and, probably, on the meteorological conditions during the sampling period. The presence of mercury in both the vapour and particulate phases in the atmosphere of the urban site can explain the high mercury concentrations found in urban dust reported for some cities in the Amazon, and also the relatively high Hg concentrations found in soils adjacent to the urban centre of Alta Floresta. It appears that the urban dust of "garimpo" areas in the Amazon can act as an efficient adsorber of Hgv emitted by gold dealer operations during the purification process. Mercury emissions from gold dealer shops in the Amazon have been considered as a human health risk through the inhalation of Hg vapour. However, although true for indoor sites, the significant contribution of particulate phase Hg shown in this study in outdoor urban sites calls for a re-evaluation of the risk assessment estimates performed up to now in urban centres in the Amazon.

Determination of methanol and ethanol by gas chromatrography following air sampling onto florisil cartridges and their concentrations at urban sites in the three largest cities in Brazil.

A new sampling protocol was developed to determine methanol and ethanol in the gas phase, at low concentration levels, in urban atmospheres. The procedure involves collection of air samples (20.0-30.0 l) with three florisil cartridges connected in series, at a flow rate ranging from 1.0 to 2.0 l min(-1) and subsequent elution of the alcohols with water. Separation and quantification were done by gas chromatography (GC) coupled with a flame ionization detector, 'SPI' injector and column DB WAX (30 mx0.53 mmx1 mum). The minimum mass detected by the method, based on two times the average background mass on the blank cartridges, was 0.3 mug for both alcohols which, for a sampled volume of 30 l, resulted in detection limits of 7.6 and 5.3 ppbV for methanol and ethanol, respectively. The determined alcohol concentrations, in 42 different samples from the three largest cities in Brazil-São Paulo, Rio de Janeiro and Salvador-ranged from 72 ppbV to below the detection limit for methanol and from 355 to 12 ppbV for ethanol.

ICP-AES determination of small amounts of zinc in copper-base alloys after separation by adsorption of the zinc-TAN complex on Sep Pak C18 cartridges.

The use of ICP/AES for the determination of zinc, in low concentration levels, in matrices containing high levels of copper is difficult because copper interferes in the zinc main emission wavelength (213.856 nm). In the present work, a separation of zinc from copper matrices was possible, using the reaction of zinc(II) cation with 1-(2-tiazolylazo)-2-naphthol (TAN), in the pH range of 6.5-8.0, resulting in a stable red complex. Copper also reacts with TAN but its interference was avoided by the addition of ascorbic acid and thiosulphate in the reaction medium. In this way, the aqueous solution was passed through a SEP PAK C18 cartridge, in which the zinc(II)-TAN complex was quantitatively retained, but it did not occur with copper which passes through the cartridge, as [Cu(2)(S(2)O(3))(2)](2-), with the aqueous solution. The cartridge was washed with water and the complex eluted with ethanol. Then, the alcohol was evaporated and the complex decomposed by nitric acid. It results in both zinc pre-concentration and separation from copper. The zinc quantification was carried out by ICP/AES at 213.856 nm. The relative standard deviations, for ten different aliquots, were 5.7% and the average recovery found for zinc was 96%, even when the concentration ratio Cu/Zn was up to 500/1 (mg l(-1):mg l(-1)). Other metals, like nickel, for example, can react with TAN in the same way as zinc but they do not interfere in the emission wavelength 213.856 nm.

Spectrophotometric and inductively coupled plasma atomic emission spectrometric determination of titanium in ilmenites after rapid dissolution with phosphoric acid.

The use of 85% phosphoric acid in borosilicate conical flasks for the dissolution of ilmenites at 230 +/- 10 degrees C is reported. The samples were quantitatively dissolved in less than 13 min. Titanium was determined by both spectrophotometry and inductively coupled plasma atomic emission spectrometry ICP-AES. Vanadium and iron were determined by ICP-AES. In several samples of ilmenites analyzed, the TiO(2) concentration was in the range 10.6-57.5% and those of FeO and V(2)O(5) were in the ranges 31.6-51.4% and 0.39-1.32%, respectively. In the spectrophotometric method, vanadium interference occurs only when the Ti V concentration ratio is <4. In all samples analyzed this ratio was around 12, resulting in no interferences due to vanadium. Hence the ilmenite dissolution procedure using phosphoric acid was compatible with titanium quantification by both spectrophotometry and ICP-AES.

Spectrophotometric and derivative spectrophotometric determination of aluminium with Hydroxynaphthol Blue.

The reaction of aluminium(III) with Hydroxynaphtol Blue (HNB) in aqueous media at apparent pH 5.5 results in a red complex that is stable for at least 4 hr. Beer's Law is obeyed up to 1.6 microg/ml of aluminium(III) with an apparent molar absorptivity of 1.66 x 10(4) l.mol(-1). cm(-1) at 569 nm. This paper proposes procedures for aluminium(III) determination by ordinary and first-derivative spectrophotometry. The results demonstrated that the linear dynamic range is 0.03-1.60 microg/ml for ordinary spectrophotometry and 11.8-320.0 ng/ml for first derivative spectrophotometry. The HNB is not selectivity for aluminium, but the addition of EDTA allows the aluminium determination in the presence of accepted amounts of Ca(II), Mg(II), Mn(II), Ba(II), Sr(II), Cd(II), Pb(II), La(III), In(III), Bi(III) and Zn(II). The interference of Cu(II) and Hg(II) can be masked by thiosulphate. Ions such as UO(2)(II), Mo(VI), Co(II), Ti(IV) and PO(4)(III) do interfere seriously. This method was applied for aluminium determination in copper-base alloy, zinc-base alloy, magnesium-base alloy, iron ore, manganese ore, cement, dolomite, feldspar and limestone. The results indicated high accuracy and precision.