The Zwolle experience with left bundle branch area pacing using stylet-driven active fixation leads.

AIMS: Left bundle branch area pacing (LBBAP) is a novel physiological pacing modality and is regarded as a viable alternative to His bundle pacing. LBBAP has mostly been performed with the lumen-less permanent pacing lead (SelectSecure™ Model 3830, Medtronic, Inc.) with a fixed helix. The aim of this study was to compare the non-stylet driven lumen-less lead (LLL) (Medtronic 3830) with a standard stylet-driven active fixation lead (SDL) (Tendril™ STS Model 2088TC-38, Abbott Laboratories) in terms of lead parameters, procedural success and complication rates. METHODS: Patients receiving a LBBA pacemaker in the Isala Hospital, The Netherlands, were prospectively enrolled. The majority received a standard right ventricular (RV) lead as backup, the implanter chose between LLL and SDL for the LBBAP lead. RESULTS: The study included 94 patients with a mean follow-up of 30 weeks. 30/31 LLL procedures were successful, compared with 62/63 in the SDL group. Including the participants that lost LBBAP during follow-up resulted in success rates of 90.3% for LLL versus 96.8% for SDL, P = 0.199. Mean number of deployments was significantly lower in the SDL group compared with the LLL group (2 ± 2.3 versus 4 ± 3.4, P = 0.005), implantation and procedural times were comparable. Pacing thresholds were low and remained low in both groups (at last follow-up 0.8 ± 0.30 V for LLL versus 0.6 ± 0.20 V for SDL). Complication rates did not differ significantly between both groups, P = 0.805. CONCLUSION: LBBAP using SDL is feasible and has comparable success rates with lower number of deployments of the active fixation screw.

Technical Feasibility and Design of a Shape Memory Alloy Support Device to Increase Ejection Fraction in Patients with Heart Failure.

PURPOSE: Heart failure is increasingly prevalent in the elderly. Treatment of patients with heart failure aims at improving their clinical condition, quality of life, prevent hospital (re)admissions and reduce mortality. Unfortunately, only a select group of heart failure patients with reduced ejection fraction are eligible for Cardiac Resynchronization Therapy where 30-40% remain non-responders and need left ventricular support. The aim of this study is to investigate if a shape memory alloy (SMA) is able to increase the ejection fraction of a mono-chamber static heart model by 5%. METHODS: A pediatric ventilation balloon was used as a heart model (mono-chamber). Flexinol®, a SMA, was placed around the heart model in multiple configurations and activated using pulse width modulation techniques to determine influence of diameter and configuration on volume displacement. Furthermore, pressure within the heart model was measured with a custom-made pressure sensor. RESULTS: SMA with a diameter of 0.38 mm, placed in a spiral shape and activated with a duty cycle of 80% and a frequency of 50/min gave the highest ejection fraction increase of 3.5%. CONCLUSIONS: This study demonstrated the feasibility of volume displacement in a static heart model by activation of SMA-wires. Configuration, duty cycle, frequency, pulse intervals and diameter were identified as important factors affecting the activation of SMA-wires on volume displacement. Future research should include the use of parallel SMA-wires, prototype testing in dynamic or ex vivo bench models.