Water Structure in the First Layers on TiO2: A Key Factor for Boosting Solar-Driven Water-Splitting Performances.

The water hydrogen-bonded network is strongly perturbed in the first layers in contact with the semiconductor surface. Even though this aspect influences the outer-sphere electron transfer, it was not recognized that it is a crucial factor impacting the solar-driven water-splitting performances. To fill this gap, we have selected two TiO2 anatase samples (with and without B-doping), and by extensive experimental and computational investigations, we have demonstrated that the remarkable 5-fold increase in water-splitting photoactivity of the B-doped sample cannot be ascribed to effects typically associated to enhanced photocatalytic properties, such as band gap, heterojunctions, crystal facets, and other aspects. Studying these samples by combining FTIR measurements under controlled humidity with first-principles simulations sheds light on the role and nature of the first-layer water structure in contact with the photocatalyst surfaces. It turns out that the doping hampers the percolation of tetrahedrally coordinated water molecules while enhancing the population of topological H-bond defects forming approximately linear H-bonded chains. This work unveils how doping the semiconductor surface affects the local electric field, determining the water splitting rate by influencing the H-bond topologies in the first water layers. This evidence opens new prospects for designing efficient photocatalysts for water splitting.

Absorption and Fluorescence Emission Investigations on Supramolecular Assemblies of Tetrakis-(4-sulfonatophenyl)porphyrin and Graphene Quantum Dots.

The one-pot synthesis of N-doped graphene quantum dots (GQDs), capped with a positively charged polyamine (trien), has been realized through a microwave-assisted pyrolysis on solid L-glutamic acid and trien in equimolar amounts. The resulting positively charged nanoparticles are strongly emissive in aqueous solutions and are stable for months. The interaction with the anionic tetrakis(4-sulphonatophenyl)porphyrin (TPPS4) has been investigated at neutral and mild acidic pH using a combination of UV/vis absorption spectroscopy together with static and time-resolved fluorescence emission. At pH = 7, the experimental evidence points to the formation of a supramolecular adduct mainly stabilized by electrostatic interactions. The fluorescence emission of the porphyrin is substantially quenched while GQDs remain still emissive. On decreasing the pH, protonation of TPPS4 leads to formation of porphyrin J-aggregates through the intermediacy of the charged quantum dots.

Orange Peel Biomass-derived Carbon Supported Cu Electrocatalysts Active in the CO2 -Reduction to Formic Acid.

We report a green, wet chemistry approach towards the production of C-supported Cu electrocatalysts active in the CO2 reduction to formic acid. We use citrus peels as a C support precursor and as a source of reducing agents for the Cu cations. We show that orange peel is a suitable starting material compared to lemon peel for the one-pot hydrothermal synthesis of Cu nanostructures affording better Cu dispersion as well as productivity and selectivity towards formic acid. We rationalize this finding in terms of the beneficial chemical composition of the orange peel, which favors both the reduction of the Cu precursor as well as the carbon matrix. This work demonstrates new viable opportunities for the reuse of citrus waste on a rational basis.

Elucidating the mechanism of the CO2 methanation reaction over Ni-Fe hydrotalcite-derived catalysts via surface-sensitive in situ XPS and NEXAFS.

Hydrotalcite-derived Ni and Fe-promoted hydrotalcite-derived Ni catalysts were found to outperform industrial catalysts in the CO2 methanation reaction, however the origin of the improved activity and selectivity of these catalysts is not clear. Here, we report a study of these systems by means of in situ X-ray photoelectron spectroscopy and near-edge X-ray absorption spectroscopy elucidating the chemical nature of the catalysts surface under reaction conditions and revealing the mechanism by which Fe promotes activity and selectivity towards methane. We show that the increase of the conversion leads to hydroxylation of the Ni surface following the formation of water during the reaction. This excessive Ni surface hydroxylation has however a detrimental effect as shown by a controlled study. A dominant metallic Ni surface exists in conditions of higher selectivity towards methane whereas if an increase of the Ni surface hydroxylation occurs, a higher selectivity towards carbon monoxide is observed. The electronic structure analysis of the Fe species under reaction conditions reveals the existence of predominantly Fe(iii) species at the surface, whereas a mixture of Fe(ii)/Fe(iii) species is present underneath the surface when selectivity to methane is high. Our results highlight that Fe(ii) exerts a beneficial effect on maintaining Ni in a metallic state, whereas the extension of the Fe oxidation is accompanied by a more extended Ni surface hydroxylation with a negative impact on the selectivity towards methane.

Enhanced Hydrogen Transport over Palladium Ultrathin Films through Surface Nanostructure Engineering.

Palladium ultrathin films (around 2 µm) with different surface nanostructures are characterized by TEM, SEM, AFM, and temperature programmed reduction (TPR), and evaluated in terms of H2 permeability and H2-N2 separation. A change in the characteristics of Pd seeds by controlled oxidation-reduction treatments produces films with the same thickness, but different surface and bulk nanostructure. In particular, the films have finer and more homogeneous Pd grains, which results in lower surface roughness. Although all samples show high permeo-selectivity to H2 , the samples with finer grains exhibit enhanced permeance and lower activation energy for H2 transport. The analysis of the data suggests that grain boundaries between the Pd grains at the surface favor H2 transfer from surface to subsurface. Thus, the surface nanostructure plays a relevant role in enhancing the transport of H2 over the Pd ultrathin film, which is an important aspect to develop improved membranes that function at low temperatures and toward new integrated process architectures in H2 and syngas production with enhanced sustainability.

New Sustainable Model of Biorefineries: Biofactories and Challenges of Integrating Bio- and Solar Refineries.

The new scenario for sustainable (low-carbon) chemical and energy production drives the development of new biorefinery concepts (indicated as biofactories) with chemical production at the core, but flexible and small-scale production. An important element is also the integration of solar energy and CO2 use within biobased production. This concept paper, after shortly introducing the motivation and recent trends in this area, particularly at the industrial scale, and some of the possible models (olefin and intermediate/high-added-value chemicals production), discusses the opportunities and needs for research to address the challenge of integrating bio- and solar refineries. Aspects discussed regard the use of microalgae and CO2 valorization in biorefineries/biofactories by chemo- or biocatalysis, including possibilities for their synergetic cooperation and symbiosis, as well as integration within the agroenergy value chain.

Dynamics of palladium on nanocarbon in the direct synthesis of H2O2.

This work aims to clarify the nanostructural transformation accompanying the loss of activity and selectivity for the hydrogen peroxide synthesis of palladium and gold-palladium nanoparticles supported on N-functionalized carbon nanotubes. High-resolution X-ray photoemission spectroscopy (XPS) allows the discrimination of metallic palladium, electronically modified metallic palladium hosting impurities, and cationic palladium. This is paralleled by the morphological heterogeneity observed by high-resolution TEM, in which nanoparticles with an average size of 2 nm coexisted with very small palladium clusters. The morphological distribution of palladium is modified after reaction through sintering and dissolution/redeposition pathways. The loss of selectivity is correlated to the extent to which these processes occur as a result of the instability of the particle at the carbon surface. We assign beneficial activity in the selective hydrogenation of oxygen to palladium clusters with a modified electronic structure compared with palladium metal or palladium oxides. These beneficial species are formed and stabilized on carbons modified with nitrogen atoms in substitutional positions. The formation of larger metallic palladium particles not only reduces the number of active sites for the synthesis, but also enhances the activity for deep hydrogenation to water. The structural instability of the active species is thus detrimental in a dual way. Minimizing the chance of sintering of palladium clusters by all means is thus the key to better performing catalysts.

Volumetric apparatus for hydrogen adsorption and diffusion measurements: sources of systematic error and impact of their experimental resolutions.

The development of a volumetric apparatus (also known as a Sieverts' apparatus) for accurate and reliable hydrogen adsorption measurement is shown. The instrument minimizes the sources of systematic errors which are mainly due to inner volume calibration, stability and uniformity of the temperatures, precise evaluation of the skeletal volume of the measured samples, and thermodynamical properties of the gas species. A series of hardware and software solutions were designed and introduced in the apparatus, which we will indicate as f-PcT, in order to deal with these aspects. The results are represented in terms of an accurate evaluation of the equilibrium and dynamical characteristics of the molecular hydrogen adsorption on two well-known porous media. The contribution of each experimental solution to the error propagation of the adsorbed moles is assessed. The developed volumetric apparatus for gas storage capacity measurements allows an accurate evaluation over a 4 order-of-magnitude pressure range (from 1 kPa to 8 MPa) and in temperatures ranging between 77 K and 470 K. The acquired results are in good agreement with the values reported in the literature.

Catalytic partial oxidation and membrane separation to optimize the conversion of natural gas to syngas and hydrogen.

The multistep integration of hydrogen-selective membranes into catalytic partial oxidation (CPO) technology to convert natural gas into syngas and hydrogen is reported. An open architecture for the membrane reactor is presented, in which coupling of the reaction and hydrogen separation is achieved independently and the required feed conversion is reached through a set of three CPO reactors working at 750, 750 and 920 °C, compared to 1030 °C for conventional CPO technology. Obtaining the same feed conversion at milder operating conditions translates into less natural gas consumption (and CO(2) emissions) and a reduction of variable operative costs of around 10 %. It is also discussed how this energy-efficient process architecture, which is suited particularly to small-to-medium applications, may improve the sustainability of other endothermic, reversible reactions to form hydrogen.

Identification of unsaturated N-acylhomoserine lactones in bacterial isolates of Rhodobacter sphaeroides by liquid chromatography coupled to electrospray ionization-hybrid linear ion trap-Fourier transform ion cyclotron resonance mass spectrometry.

The identification of two unsaturated N-acylhomoserine lactones (AHLs) produced by Rhodobacter sphaeroides bacteria, based on liquid chromatography (LC) coupled to a hybrid quadrupole linear ion trap (LTQ)-Fourier transform ion cyclotron resonance (FTICR) mass spectrometer upon electrospray ionization (ESI), is presented. Besides the confirmation of the signaling molecule already described in the literature, i.e. (Z)-N-tetradec-7-enoyl-homoserine lactone (C(14:1)-HSL), we have discovered the occurrence, at low, yet significant levels, of another monounsaturated compound, C(12:1) -HSL, which may extend the number of small diffusible chemical signals known for R. sphaeroides. Both unsaturated AHLs were identified by high-resolution FTICR mass spectrometry in extracts of bacterial culture media and the occurrence of a C=C bond was assessed upon their conversion into bromohydrins. Collision-induced dissociation (CID) spectra were then collected on the LTQ mass analyzer. A careful comparison of tandem MS spectra of monounsaturated (i.e., C(12:1)-HSL and C(14:1)-HSL) and saturated AHLs (i.e. C(12)-HSL and C(14)-HSL) led to the emphasis of two series of product ions, exhibiting 14 Da spaced m/z ratios. Both series were referred to progressive fragmentations at the aliphatic end of the AHL acyl chains, followed by neutral losses of terminal alkenes (i.e. CH(2)=CH(CH(2))(n)H). In particular, the series located at the higher end of the explored m/z range (>200 Da), observed only for monounsaturated species, enabled the location of the C=C bond between carbons 7 and 8 of the acyl chain.

Determination of elemental compositions by gas chromatography/time-of-flight mass spectrometry using chemical and electron ionization.

Many metabolomic applications use gas chromatography/mass spectrometry (GC/MS) under standard 70 eV electron ionization (EI) parameters. However, the abundance of molecular ions is often extremely low, impeding the calculation of elemental compositions for the identification of unknown compounds. On changing the beam-steering voltage of the ion source, the relative abundances of molecular ions at 70 eV EI were increased up to ten-fold for alkanes, fatty acid methyl esters and trimethylsilylated metabolites, concomitant with 2-fold absolute increases in ion intensities. We have compared the abundance, mass accuracy and isotope ratio accuracy of molecular species in EI with those in chemical ionization (CI) with methane as reagent gas under high-mass tuning. Thirty-three peaks of a diverse set of trimethylsilylated metabolites were analyzed in triplicate, resulting in 342 ion species ([M+H](+), [M-CH(3)](+) for CI and [M](+.), [M-CH(3)](+.) for EI). On average, CI yielded 8-fold more intense molecular species than EI. Using internal recalibration, average mass errors of 1.8 +/- 1.6 mm/z units and isotope ratio errors of 2.3 +/- 2.0% (A+1/A ratio) and 1.7 +/- 1.8% (A+2/A ratio) were obtained. When constraining lists of calculated elemental compositions by chemical and heuristic rules using the Seven Golden Rules algorithm and PubChem queries, the correct formula was retrieved as top hit in 60% of the cases and within the top-3 hits in 80% of the cases.

Analysis of S-adenosylmethionine and related sulfur metabolites in bacterial isolates of Pseudomonas aeruginosa (BAA-47) by liquid chromatography/electrospray ionization coupled to a hybrid linear quadrupole ion trap and Fourier transform ion cyclotron resonance mass spectrometry.

A comprehensive and highly selective method for detecting in bacterial supernatants a modified sulfur nucleoside, S-adenosyl-L-methionine (SAM), and its metabolites, i.e., S-adenosylhomocysteine (SAH), adenosine (Ado), 5'-deoxy-5'-methylthioadenosine (MTA), adenine (Ade), S-adenosyl-methioninamine (dcSAM), homocysteine (Hcy) and methionine (Met), was developed. The method is based on reversed-phase liquid chromatography with positive electrospray ionization (ESI+) coupled to a hybrid linear quadrupole ion trap (LTQ) and 7-T Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS). A gradient elution was employed with a binary solvent of 0.05 M ammonium formate at pH 4 and acetonitrile. The assay involves a simultaneous cleanup of cell-free bacterial broths by solid-phase extraction and trace enrichment of metabolites with a 50-fold concentration factor by using immobilized phenylboronic and anion-exchange cartridges. While the quantitative determination of SAM was performed using stable-isotope-labeled SAM-d3 as an internal standard, in the case of Met and Ade, Met-13C and Ade-15N2 were employed as isotope-labeled internal standards, respectively. This method enabled the identification of SAM and its metabolites in cell-free culture of Pseudomonas aeruginosa grown in Davis minimal broth (formulation without sulphur organic compounds), with routine sub-ppm mass accuracies (-0.27 +/- 0.68 ppm). The resulting contents of S(C)S(S)-SAM, S(S)-dcSAM, MTA, Ado and Met in the free-cell supernatant of P. aeruginosa was 56.4 +/- 2.1 nM, 32.2 +/- 2.2 nM, 0.91 +/- 0.10 nM, 19.6 +/- 1.2 nM and 1.93 +/- 0.02 microM (mean +/- SD, n = 4 extractions), respectively. We report also the baseline separation (Rs > or = 1.5) of both diastereoisomeric forms of SAM (S(C)S(S) and S(C)R(S)) and dcSAM (S(S) and R(S)), which can be very useful to establish the relationship between the biologically active versus the inactive species, S(C)S(S)/S(C)R(S) and S(S)/R(S) of SAM and dcSAM, respectively. An additional confirmation of SAM-related metabolites was accomplished by a systematic study of their MS/MS spectra.

Mass spectrometric evidence for collisionally induced removal of H(2) from monoanions of (10)B nido-carborane derivatives investigated by electrospray ionization quadrupole linear ion trap and Fourier transform ion cyclotron resonance mass spectrometry.

Some newly synthesized (10)B nido-carborane derivatives, i.e., 7,8-dicarba-nido-undecaborane monoanions ([7-Me-8-R-C(2)B(9)H(10)](-)K(+), R = H, butyl, hexyl, octyl and decyl), have been fully characterised and examined by electrospray ionization and Fourier transform ion cyclotron resonance mass spectrometry with liquid chromatographic separation (LC/ESI-FTICR-MS). These boron-containing compounds exhibit abundant molecular ions ([M](-)) at m/z 140.22631 [C(3) (10)B(9)H(14)](-), m/z 196.28883 [C(7) (10)B(9)H(22)](-), m/z 224.32032 [C(9) (10)B(9)H(26)](-), m/z 252.35133 [C(11) (10)B(9)H(30)](-) and m/z 280.38354 [C(13) (10)B(9)H(34)](-) at the normal tube lens voltage setting of -90 V, which was an instrumental parameter value selected in the tuning operation. Additional [M-nH(2)](-) (n = 1-4) ions were observed in the mass spectra when higher tube lens voltages were applied, i.e., -140 V. High-resolution FTICR-MS data revealed the accurate masses of fragment ions, bearing either an even or an odd number of electrons. Collision-induced dissociation of the [M-nH(2)](-) ions (n = 0-4) in the quadrupole linear ion trap (LTQ) analyzer confirmed the loss of hydrogen molecules from the molecular ions. It is suggested that the loss of H(2) molecules from the alkyl chain is a consequence of the stabilization effect of the nido-carborane charged polyhedral skeleton.

Identification and fragmentation pathways of caffeine metabolites in urine samples via liquid chromatography with positive electrospray ionization coupled to a hybrid quadrupole linear ion trap (LTQ) and Fourier transform ion cyclotron resonance mass spectrometry and tandem mass spectrometry.

Liquid chromatography (LC) with positive ion electrospray ionization (ESI+) coupled to a hybrid quadrupole linear ion trap (LTQ) and Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) was employed for the simultaneous determination of caffeine and its metabolites in human urine within a single chromatographic run. LC/ESI-FTICRMS led to the unambiguous determination of the molecular masses of the studied compounds without interference from other biomolecules. A systematic and comprehensive study of the mass spectral behaviour of caffeine and its fourteen metabolites by tandem mass spectrometry (MS/MS) was performed, through in-source ion trap collision-induced dissociation (CID) of the protonated molecules, [M+H](+). A retro-Diels-Alder (RDA) process along with ring-contraction reactions were the major fragmentation pathways observed during CID. The base peak of xanthine precursors originates from the loss of methyl isocyanate (CH(3)NCO, 57 Da) or isocyanic acid (HNCO, 43 Da), which in turn lose a CO unit. Also uric acid derivatives shared a RDA rearrangement as a common fragmentation process and a successive loss of CO(2) or CO. The uracil derivatives showed a loss of a ketene unit (CH(2)CO, 42 Da) from the protonated molecule along with the loss of H(2)O or CO. To assess the potential of the present method three established metabolite ratios to measure P450 CYP1A2, N-acetyltransferase and xanthine oxidase activities were evaluated by a number of identified metabolites from healthy human urine samples after caffeine intake.

Accurate mass analysis of N-acyl-homoserine-lactones and cognate lactone-opened compounds in bacterial isolates of Pseudomonas aeruginosa PAO1 by LC-ESI-LTQ-FTICR-MS.

N-acyl-homoserine-lactones (AHSLs) are widely conserved signal molecules present in quorum sensing systems of Gram-negative bacteria such as Pseudomonas aeruginosa. We present here the results obtained with a hybrid linear trap/Fourier transform ion cyclotron resonance (LTQ-FTICR) mass spectrometer used to investigate the occurrence of AHSLs and cognate N-acyl-homoserines (AHSs) in bacterial isolates of P. aeruginosa (strain PAO1). Two hydrolysed AHSs were found in significant amounts, most likely formed through the lactone opening of N-3-oxo-decanoyl-L-homoserine-lactone (3OC10-HSL) and N-3-oxo-dodecanoyl-L-homoserine-lactone (3OC12-HSL). Structure elucidation of these ring-opened molecules, i.e. N-3-oxo-decanoyl-L-homoserine (3OC10-HS), and N-3-oxo-dodecanoyl-L-homoserine (3OC12-HS), which are not detected by bacterial biosensors, was performed by high-resolution and accurate mass measurements upon liquid chromatography (LC) and confirmed by tandem MS in the LTQ analyser. Assignment of chemical formula, with mass spectra in the form of [M+H]+, was significantly expedited by extracted ion chromatograms (XICs) because the number of potentially plausible formulae for each protonated signalling molecule was considerably reduced a priori by the LC behaviour, the high mass measurement accuracy available in FTICR mass spectra and the isotopic patterns. At least two concentration levels were observed in spent culture supernatants of P. aeruginosa: compounds at a relatively high content (5-15 microM) that is C4-HSL, 3OC10-HS, and 3OC12-HS and those occurring at a lower content (<0.2 microM) that is C6-HSL and C8-HSL. The implications of this work extend to a great variety of Gram-negative bacteria.

Profiling of N-acyl-homoserine lactones by liquid chromatography coupled with electrospray ionization and a hybrid quadrupole linear ion-trap and Fourier-transform ion-cyclotron-resonance mass spectrometry (LC-ESI-LTQ-FTICR-MS).

A method for the comprehensive profiling of the N-acyl-homoserine lactone (AHL) family of bacterial quorum-sensing molecules is presented using liquid chromatography (LC) coupled to a hybrid quadrupole linear ion trap (LTQ) and Fourier-transform ion-cyclotron-resonance mass spectrometer (FTICR). We demonstrate an increase in signal intensity in MS with electrospray ionization (ESI) of the protonated molecules, [M + H](+), by using acetonitrile (ACN) instead of methanol (MeOH) as the organic solvent under the conditions in which the samples were supplied to the probe by direct infusion at constant flow rates. The presence of ACN prevents the formation of methanol adducts such as [M + MeOH + H](+) and [M + MeOH + Na](+), while also lowering the signal intensity of sodiated [M + Na](+) ions. Sensitivity of these signaling molecules in terms of signal-to-noise ratio (S/N) using low-resolution LTQ-MS and high-resolution FTICR-MS were compared under reversed-phase (RP) LC separations with ESI interface. Special emphasis was paid to the choice of the separation column, its elution conditions and detection of the major AHL compounds produced by the Serratia liquefaciens strain ATCC 27592. The most promising results were obtained using a RP C16-amide column eluted with a linear mobile phase gradient ACN/H(2)O containing 0.1% formic acid. The whole set of AHL homologs in bacterial extracts was detected in the extracted-ion chromatographic (XIC) mode, and the calculations of molecular formulae were performed by including the isotopic pattern. This mode of displaying data, with a very narrow mass-to-charge ratio window (i.e. +/- 0.0010 as m/z unit) around each selected ion, has allowed the identification of all the eight known homoserine lactones, viz. C(4)-HSL, 3-oxo-C(6)-HSL, C(6)-HSL, 3-oxo-C(8)-HSL, C(8)-HSL, C(10)-HSL, C(12)-HSL and C(14)-HSL. In addition, at least four uncommon signaling mediators previously unreported, namely, 3-oxo-C(10:1)-HSL, 3-oxo-C(11:2)-HSL, 3-oxo-C(13:2)-HSL and 3-OH-C(16)-HSL, were identified and characterized; their roles in cell-to-cell communication has to be elucidated.

A three-factor Doehlert matrix design in optimising the determination of octadecyltrimethylammonium bromide by cation-exchange chromatography with suppressed conductivity detection.

A simple and effective chromatographic method with suppressed conductivity detection was developed and validated to determine dissolved samples of octadecyltrimethylammonium bromide (C18H37N+ Me3Br-, ODTAB) for purity testing. A response surface methodology generated with a Doehlert matrix design was applied to optimize the chromatographic and detection conditions in ion-exchange chromatography (IEC) with conductivity detection in the chemical suppression mode. A three-factor Doehlert design was performed to fit a second-order model and jointly optimize the peak intensity and shorten analysis time through a global desirability function. Regenerant flow rate, volume fraction of acetonitrile in the acidic eluent and its flow rate were studied at seven, five and three levels, respectively. The optimized separation and detection conditions were accomplished by using a cation-exchange column eluted at 0.5 mL min(-1) with an isocratic mobile phase composed of CH3CN and 25 mN H2SO4, 82/18 (v/v). Chemical suppression of ionic conductivity was performed by 100 mN tetrabutylammonium hydroxide (TBAOH) as a regenerant at a flow-rate of 4.0 mL min(-1). Remarkably good agreement was found between predicted and experimental values of signal intensity and chromatographic retention. With the developed method, a linear calibration curve of ODTA+ as bromide salt from 5 to 1000 ppm was obtained using hexadecyltrimethylammonium bromide as internal standard. The estimated limit of detection was 0.3 ppm (S/N=3). The effectiveness of electrochemically suppressed conductivity detection of ODTA+ was also demonstrated, thus making easier the whole detection operation and instrumental needs as well.