FeS2 and WO3 nanoparticles decorated on biochar as a high throughput electrode for supercapacitors.

The need for cutting-edge energy storage technologies, such as supercapacitors, has been enhanced tremendously to meet the demands of the growing population and depleting fossil fuel reserves. Herein, we reported the synthesis of FeS2 and WO3 nanoparticles decorated on the biochar derived from peanut shells using a facile ultrasonication approach. SEM, TEM, XPS, XRD, FTIR and N2 adsorption-desorption isotherms characterized the structural and physical properties of the as-synthesized materials. BET analysis revealed a specific surface area of 259.87 m2 g-1 for the ternary composite, which serves as a better foundation for transmitting ions and electrons. The composite material derives its advantages from the synergistic effect of biochar's high electronic conductivity and the better capacity retention of FeS2 and WO3 nanoparticles. The ternary composite exhibits excellent electrochemical performance when used as the electrode material for supercapacitors. It offers a high specific capacitance of 319.96 F g-1 at a current density of 1.0 A g-1 and an impressive rate capability, maintaining 82.93% of its initial performance at a current density of 6 A g-1, even after 1000 cycles. Preparing biochar/FeS2/WO3 material with improved electrochemical properties offers a viable pathway for advancing its utilization in supercapacitor applications.

Adsorption of perfluorooctanoic carboxylic and heptadecafluorooctane sulfonic acids via magnetic chitosan: isotherms and modeling.

This paper evaluates the adsorption mechanism of perfluorooctanoic carboxylic acid (PFCA) and heptadecafluorooctane sulfonic acid (HFOSA) on magnetic chitosan for the first time via a statistical physics modeling. Magnetic chitosan (MC-CoFe2O4) was produced from shrimp wastes and used in standard batch adsorption systems to remove PFCA and HFOSA. The experimental isotherms indicated that the maximum adsorption capacities ranged from 14 to 27.12 mg/g and from 19.16 to 45.12 mg/g for PFCA and HFOSA, respectively, where an exothermic behavior was observed for both compounds. The adsorption data were studied via an advanced model hypothesizing that a multilayer process occurred for these adsorption systems. This theoretical approach indicated that the total number of formed layers of PFCA and HFOSA adsorbates is about 3 (Nt = 2.83) at high temperatures (328 K) where a molecular aggregation process was noted during the adsorption. The maximum saturation-multilayer adsorption of PFCA and HFOSA on magnetic chitosan was 30.77 and 50.26 mg/g, respectively, and the corresponding adsorption mechanisms were successfully investigated. Two energies were responsible for the formed adsorbate layer directly on the surface and the vertical layers were computed and interpreted, reflecting that physical interactions were involved to bind these molecules on the adsorbent surface at different temperatures where the calculated adsorption energies ranged from 14 to 31 kJ/mol. Overall, this work provides theoretical insights to understand the adsorption mechanism of PFCA and HFOSA using the statistical physics modeling and its results can be used to improve the adsorbent performance for engineering applications.

Preparation and Characterization of Mono- and Biphasic Ca1-xAgxHPO4·nH2O Compounds for Biomedical Applications.

This study aimed to explore the effects of the full-scale replacement (up to 100%) of Ca2+ ions with Ag1+ ions in the structure of brushite (CaHPO4·2H2O). This substitution has potential benefits for producing monophasic and biphasic Ca1-xAgxHPO4·nH2O compounds. To prepare the starting solutions, (NH4)2HPO4, Ca(NO3)2·4H2O, and AgNO3 at different concentrations were used. The results showed that when the Ag/Ca molar ratio was below 0.25, partial substitution of Ca with Ag reduced the size of the unit cell of brushite. As the Ag/Ca molar ratio increased to 4, a compound with both monoclinic CaHPO4·2H2O and cubic nanostructured Ag3PO4 phases formed. There was a nearly linear relationship between the Ag ion ratio in the starting solutions and the wt% precipitation of the Ag3PO4 phase in the resulting compound. Moreover, when the Ag/Ca molar ratio exceeded 4, a single-phase Ag3PO4 compound formed. Hence, adjusting the Ag/Ca ratio in the starting solution allows the production of biomaterials with customized properties. In summary, this study introduces a novel synthesis method for the mono- and biphasic Ca1-xAgxHPO4·nH2O compounds brushite and silver phosphate. The preparation of these phases in a one-pot synthesis with controlled phase composition resulted in the enhancement of existing bone cement formulations by allowing better mixing of the starting ingredients.

Marine-Derived Compounds for CDK5 Inhibition in Cancer: Integrating Multi-Stage Virtual Screening, MM/GBSA Analysis and Molecular Dynamics Investigations.

Cyclin-dependent kinase 5 (CDK5) plays a crucial role in various biological processes, including immune response, insulin secretion regulation, apoptosis, DNA (deoxyribonucleic acid) damage response, epithelial-mesenchymal transition (EMT), cell migration and invasion, angiogenesis, and myogenesis. Overactivation of CDK5 is associated with the initiation and progression of cancer. Inhibiting CDK5 has shown potential in suppressing cancer development. Despite advancements in CDK5-targeted inhibitor research, the range of compounds available for clinical and preclinical trials remains limited. The marine environment has emerged as a prolific source of diverse natural products with noteworthy biological activities, including anti-cancer properties. In this study, we screened a library of 47,450 marine natural compounds from the comprehensive marine natural product database (CMNPD) to assess their binding affinity with CDK5. Marine compounds demonstrating superior binding affinity compared to a reference compound were identified through high-throughput virtual screening, standard precision and extra-precision Glide docking modes. Refinement of the selected molecules involved evaluating molecular mechanics-generalized born surface area (MM/GBSA) free binding energy. The three most promising compounds, (excoecariphenol B, excoecariphenol A, and zyzzyanone B), along with the reference, exhibiting favorable binding characteristics were chosen for molecular dynamics (MD) simulations for 200 nanoseconds. These compounds demonstrated interaction stability with the target during MD simulations. The marine compounds identified in this study hold potential as effective CDK5 inhibitors and warrant subsequent experimental validation.

The Effect of Full-Scale Exchange of Ca2+ with Zn2+ Ions on the Crystal Structure of Brushite and Its Phase Composition.

This study was carried out to investigate the effect of a complete exchange of Ca2+ with Zn2+ ions on the structure of brushite (CaHPO4·2H2O), which might be advantageous in the production process of CaxZn1-xHPO4·nH2O. To acquire the starting solutions needed for the current study, (NH4)2HPO4, Ca(NO3)2·4H2O, and Zn(NO3)2·6H2O were utilized in several molar concentrations. The findings indicate that Ca is partly substituted by Zn when the Zn/Ca molar ratio is below 0.25 and that Zn doping hinders the crystallization of brushite. A continued increase in the Zn/Ca molar ratio to 1 (at which point the supersaturation of the Zn solution rises) led to a biphasic compound of monoclinic brushite and parascholzite precipitate. Elevating the Zn/Ca molar ratio to 1.5 resulted in a precipitate of a parascholzite-like mineral. Finally, increasing the Zn/Ca molar ratio to 4 and above resulted in the formation of the hopeite mineral. Future biomaterial production with specific and bespoke characteristics can be achieved by adjusting the Zn/Ca ratio in the starting solution. It Rhas been established that the Zn/Ca ratio in the starting solution can be adjusted to obtain minerals with specific compositions. Thus, new synthesis methods for parascholzite and hopeite were introduced for the first time in this manuscript.

Ecofriendly Elimination of Ni (II) Using Fabricated Nanocomposite Based on Chitosan/Silver Nanoparticles/Carbon Nanotubes.

Nickel ions are hazardous heavy metals that are non-biodegradable and can lead to allergic sensitivity and dermatitis. Nanomaterials are chosen for their effective elimination of impurities from water structures based entirely on the variety of therapy and degree of purification. The target of this work was the combination of the properties of biopolymers such as chitosan, silver nanoparticles (SNPs), and carbon nanotubes (CNTs) in one ecofriendly compound for Ni (II) uptake from the aqueous solution. To attain this target, the endeavor was made by creating a nanocomposite based on chitosan/SNPs/CNTs. The characterization of the structure of the fabricated nanocomposite (Chit-SNPs-CNTs) was carried out using different techniques. The removal of Ni (II) was examined by studying the adsorption of Ni (II) ions onto the fabricated nanocomposite by batch adsorption using UV, XRD, XPS, and ICP techniques. Moreover, we investigated the effect of the contact time, pH of the solution, and mass of the adsorbent on the efficiency of the adsorption of Ni (II). The results show that the adsorption capacity of Ni (II) increased by increasing the contact time with a neutral pH. The maximum removal of Ni (II) ions (99.70%) was found using 0.3 g of the (Chit-SNPs-CNTs) nanocomposite. In addition, the results indicate that the fabricated nanocomposite has a high adsorption effectivity, which is associated to the function of the chitosan, SNPs, and CNTs in upgrading the adsorption efficiency. Finally, the results in the existing work indicate that the ecofriendly nanocomposite organized here gave excessive effectivity closer to the elimination of Ni (II).

Lifestyle habits and obesity indices among male adolescents in Riyadh, Saudi Arabia.

Obesity among adolescents is a global health apprehension which requires early prevention. The aim of this study was to determine the association between lifestyle habits including physical activity, sedentary behaviors and eating habits with obesity indices of body mass index (BMI) and waist-to-height ratio (WHtR) among male adolescents in Riyadh, Saudi Arabia. We randomly selected 471 secondary school male adolescents aged 14-18 years. A pre-validated self-reported questionnaire was used to record the data on physical activity level, sedentary behaviors, sleep duration and eating habits. The International Obesity Task Force (IOTF) cutoff values for adolescents under 18 years of age were used to define overweight and obesity. Total energy expenditure was calculated using metabolic equivalent-minutes per week. Anthropometry including weight, height, BMI, waist circumference, waist/height ratio (WHtR), were assessed. 53.7% and 48.4% of the adolescents were overweight/obese and had abdominal obesity; respectively. Those with overweight and obesity or above 50% of WHtR were much less active in terms of METs-min/week from vigorous-intensity sports, sum of all METs-min/week from all vigorous-intensity physical activity, total METs-min/week from all physical activity compared with non-obese adolescents and below 50% of WHtR. The present study identified the lifestyle habits that were associated with obesity and may represent valid targets for the prevention and management of obesity among Saudi adolescents. Knowledge of the factors that contribute to obesity could be used in preventive programs for the control of obesity among adolescents.

The construction of novel CuO/SnO2@g-C3N4 photocatalyst for efficient degradation of ciprofloxacin, methylene blue and photoinhibition of bacteria through efficient production of reactive oxygen species.

Water pollution due to organic waste and various microorganisms cause severe health problems. Numbers of techniques are used to eliminate organic waste and microorganisms from water because water pollution is a substantial issue in the current era. In the present study, sustainable and effective CuO/SnO2@g-C3N4 nanocomposites were prepared via green and chemical approach. The photo degradation of ciprofloxacin (CIP) and methylene blue (MB) by the green synthesized nanocomposite were tested. Visible and dark conditions both were used to conduct this test. The results showed that the nanocomposite is much more effective in light than in dark conditions. The synthesized nanocomposite was also tested both in light and dark against highly drug resistant microorganisms' Bacillus subtilis (B.subtilis) and Escherichia coli (E.coli). As a result, the antibacterial evaluation revealed substantial antibacterial activity in the presence of light, with a zone of inhibition covering an area of 19 (±0.5) mm and 20 (±0.1) mm, respectively, against gram negative and gram positive bacteria such as E. coli and B. subtilis. The results showed that the CuO/SnO2@g-C3N4 nanocomposite is a stable, eco-friendly photocatalyst with significant resistance to CIP and MB degradation and a substantial inhibitory effect towards microorganisms in visible light.

A Novel Approach of Optimum Time Interval Estimation for Al-7.5Si/Al-18Si Liquid-Liquid Bimetal Casting in Sand and Metallic Moulds.

This work describes a novel approach for Al-7.5Si/Al-18Si liquid-liquid bimetal casting in sand and metallic moulds. The aim of the work is to facilitate and develop a simple procedure to produce an Al-7.5Si/Al-18Si bimetallic material with a smooth gradient interface structure. The procedure involves the theoretical calculation of total solidification time (TST) of the first liquid metal (M1), pouring the liquid metal (M1), and allowing it to solidify; then, before complete solidification, the second liquid metal (M2) is introduced into the mould. This novel approach has been proven to produce Al-7.5Si/Al-18Si bimetal materials using liquid-liquid casting. The optimum time interval of Al-7.5Si/Al-18Si bimetal casting with modulus of cast Mc ≤ 1 was estimated based on subtracting 5-15 s or 1-5 s from TST of M1 for sand and metallic moulds, respectively. Future work will involve determining the appropriate time interval range for castings having modulus ≥ 1 using the current approach.

Assessing awareness and knowledge level of clubfoot among a rural city population in Saudi Arabixsa: A cross-sectional study.

Purpose: Clubfoot is among the most common musculoskeletal congenital anomalies. Poor understanding of clubfoot can cause lack of awareness that leads to complications in treating this condition because of late medical intervention. This is considered as a significant public health problem, especially in communities where the burden of clubfoot deformity remains unrecognized. We assessed the level of awareness and knowledge on clubfoot among residents of rural areas and determined the knowledge and attitudes of the public toward the risk factors and general consequences of clubfoot. Methods: This cross-sectional study, conducted from January to July 2021, included the general population of small city and rural area residents. The participants completed a self-administered survey on the web. The questionnaire was pre-tested in a pilot study to ensure comprehension and ease of administration. Results: Altogether, 41.6% of the participants recognized the scientific name of clubfoot in their native language, whereas 38.9% identified the disorder after they were shown a photograph of it. The most recognized risk factors of clubfoot according to the participants were family history (52.2%), complicated pregnancy (46.5%), and medications (43.4%). Only 8.8% of the participants considered casting the initial treatment of clubfoot. Conclusion: An individual's residential area plays a role in their level of awareness concerning clubfoot. Our results suggest that many educational interventions for clubfoot must be provided in rural areas, particularly regarding therapeutic options and plans of care.

Synthesis of MnSe-Based GO Composites as Effective Photocatalyst for Environmental Remediations.

In this work, a manganese selenide/graphene oxide (MnSe/GO)-based composite was prepared for wet-chemical assisted method against organic dye; herein, methylene blue (MB) dye removal from the water was employed as a metal selenide-based photocatalyst. The synthesized MnSe/GO composite was systematically characterized by X-ray diffraction (XRD), Fourier transform electron microscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and UV-visible diffuse reflectance spectroscopy (UV-vis. DRS). The structural characteristic revealed the adequate synthesis of the sample with good crystallinity and purity of the obtained products. The morphological analysis indicates the formation of MnSe nanoflakes composed of tiny particles on their surface. At the same time, the GO nanosheets with high aggregation were formed, which may be due to the van der Waals forces. The bond interaction and compositional analysis studies confirmed and supported the structural findings with high purity. The optical analysis showed the bandgap energies of MnSe and their composites MnSe (1.7 eV), 7% GO-MnSe (2.42 eV), 14% GO-MnSe (2.6 eV), 21% GO-MnSe (3.02 eV), and 28% GO-MnSe (3.24 eV) respectively, which increase the bandgap energy after GO and MnSe recombination. Among different contents, the optimized 21% GO-MnSe composite displayed enhanced photocatalytic properties. For instance, a short time of 90 min was taken compared with other concentrations due to the narrow bandgap of MnSe and the highly conductive charge carrier's support, making the process to remove MB from water faster. These results show that the selenide-based photocatalyst can be an attractive candidate for future advanced photocatalysis applications.

Effect of H2O2 @CuONPs in the UV Light-Induced Removal of Organic Pollutant Congo Red Dye: Investigation into Mechanism with Additional Biomedical Study.

Hazardous dyes in industrial wastewater are an internationally recognized issue for community health. Nanoparticles synthesized through green protocols are a fascinating research field with numerous applications. The current study mainly aimed to investigate the degradation of Congo red (CR) dye under UV light in the presence of H2O2 and the photocatalytic activity of copper oxide nanoparticles (CuONPs). For CuONP formation, Citrus maxima extract contains a high number of phytochemical constituents. The size of CuONPs ranges between 25 and 90 nm. The photocatalytic activity of CuONPs with the addition of H2O2 was observed and analyzed under UV light to eliminate CR dye. The UV light caused the decomposition of H2O2, which produced ·OH radicals. The results revealed a significant increment in dye degradation during the presence of H2O2. The effect of concentration on the degradation of the CR dye was also studied. The degradation pathway of organic pollutants was reputable from the hydroxy radical medicated degradation of CR. Advanced Oxidation Treatment depends on the in situ production of reactive ·OH species and is presented as the most effective procedure for decontamination. The biological activity of CuONPs was evaluated against Escherichia coli Bacillus subtillis, Staphylococcus aureus, Shigella flexenari, Acinetobacter Klebsiella pneumonia, Salmonella typhi and Micrococcus luteus. The newly synthesised nanomaterials showed strong inhibition activity against Escherichia coli (45%), Bacillus subtilis (42%) and Acinetobacter species (25%). The activity of CuONPs was also investigated against different fungus species such as: Aspergillus flavus, A. niger, Candida glabrata, T. longifusus, M. Canis, C. glabrata and showed a good inhibition zone against Candida glabrata 75%, Aspergillus flavus 68%, T. longifusus 60%. The materials showed good activity against C. glaberata, A. flavus and T. longifusus. Furthermore, CuONPs were tested for antioxidant properties using 2, 2 diphenyl-1-picrylhydrazyl) (DPPH).

Efficacy of prophylactic pre-operative desmopressin administration during functional endoscopic sinus surgery for chronic rhinosinusitis: A systematic review and meta-analysis of randomised placebo-controlled trials.

OBJECTIVES: To examine the efficacy of prophylactic desmopressin versus placebo among patients undergoing functional endoscopic sinus surgery (FESS). DESIGN: Systematic review and meta-analysis of randomised controlled trials (RCTs). SETTING: The Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Embase, Scopus, and Web of Science databases were screened from inception until 18 March 2022. PARTICIPANTS: Patients undergoing FESS. MAIN OUTCOME MEASURES: Primary efficacy endpoints comprised intraoperative blood loss, visual clarity, and operation time. Secondary endpoints comprised side effects. The efficacy endpoints were summarised as risk ratio (RR) or mean difference (MD) with 95% confidence interval (CI). RESULTS: Five RCTs comprising 380 patients (desmopressin = 191 patients and placebo = 189 patients) were included. Collectively, the included RCTs had an overall low risk of bias. The pooled results showed that the mean intraoperative blood loss (n = 5 RCTs, MD = -37.97 ml, 95% CI [-56.97, -18.96], p < .001), 5-point Boezaart scores (n = 2 RCTs, MD = -.97, 95% CI [-1.21, -.74], p < .001), and 10-point Boezaart scores (n = 2 RCTs, MD = -3.00, 95% CI [-3.61, -2.40], p < .001) were significantly reduced in favour of the desmopressin group compared with the placebo group. Operation time did not significantly differ between both groups (n = 5 RCTs, MD = -3.73 min, 95% CI [-14.65, 7.18], p = .50). No patient in both groups developed symptomatic hyponatremia (n = 3 RCTs, 194 patients) or thromboembolic events (n = 2 RCTs, 150 patients). CONCLUSIONS: Among patients undergoing FESS, prophylactic administration of desmopressin does not correlate with significant clinical benefits. Data on safety is limited. Future research may explore the synergistic antihaemorrhagic efficacy and safety of tranexamic acid (TXA) plus desmopressin versus TXA alone among patients undergoing FESS.

Synthesis, Crystal Structure, Theoretical Calculations, Antibacterial Activity, Electrochemical Behavior, and Molecular Docking of Ni(II) and Cu(II) Complexes with Pyridoxal-Semicarbazone.

New Ni (II) and Cu (II) complexes with pyridoxal-semicarbazone were synthesized and their structures were solved by X-ray crystallography. This analysis showed the bis-ligand octahedral structure of [Ni(PLSC-H)2]·H2O and the dimer octahedral structure of [Cu(PLSC)(SO4)(H2O)]2·2H2O. Hirshfeld surface analysis was employed to determine the most important intermolecular interactions in the crystallographic structures. The structures of both complexes were further examined using density functional theory and natural bond orbital analysis. The photocatalytic decomposition of methylene blue in the presence of both compounds was investigated. Both compounds were active toward E. coli and S. aureus, with a minimum inhibition concentration similar to that of chloramphenicol. The obtained complexes led to the formation of free radical species, as was demonstrated in an experiment with dichlorofluorescein-diacetate. It is postulated that this is the mechanistic pathway of the antibacterial and photocatalytic activities. Cyclic voltammograms of the compounds showed the peaks of the reduction of metal ions. A molecular docking study showed that the Ni(II) complex exhibited promising activity towards Janus kinase (JAK), as a potential therapy for inflammatory diseases, cancers, and immunologic disorders.

Managing and Retrieving Bilingual Documents Using Artificial Intelligence-Based Ontological Framework.

In recent times, artificial intelligence (AI) methods have been applied in document and content management to make decisions and improve the organization's functionalities. However, the lack of semantics and restricted metadata hinders the current document management technique from achieving a better outcome. E-Government activities demand a sophisticated approach to handle a large corpus of data and produce valuable insights. There is a lack of methods to manage and retrieve bilingual (Arabic and English) documents. Therefore, the study aims to develop an ontology-based AI framework for managing documents. A testbed is employed to simulate the existing and proposed framework for the performance evaluation. Initially, a data extraction methodology is utilized to extract Arabic and English content from 77 documents. Researchers developed a bilingual dictionary to teach the proposed information retrieval technique. A classifier based on the Naïve Bayes approach is designed to identify the documents' relations. Finally, a ranking approach based on link analysis is used for ranking the documents according to the users' queries. The benchmark evaluation metrics are applied to measure the performance of the proposed ontological framework. The findings suggest that the proposed framework offers supreme results and outperforms the existing framework.

Detecting Coronary Artery Disease from Computed Tomography Images Using a Deep Learning Technique.

In recent times, coronary artery disease (CAD) has become one of the leading causes of morbidity and mortality across the globe. Diagnosing the presence and severity of CAD in individuals is essential for choosing the best course of treatment. Presently, computed tomography (CT) provides high spatial resolution images of the heart and coronary arteries in a short period. On the other hand, there are many challenges in analyzing cardiac CT scans for signs of CAD. Research studies apply machine learning (ML) for high accuracy and consistent performance to overcome the limitations. It allows excellent visualization of the coronary arteries with high spatial resolution. Convolutional neural networks (CNN) are widely applied in medical image processing to identify diseases. However, there is a demand for efficient feature extraction to enhance the performance of ML techniques. The feature extraction process is one of the factors in improving ML techniques' efficiency. Thus, the study intends to develop a method to detect CAD from CT angiography images. It proposes a feature extraction method and a CNN model for detecting the CAD in minimum time with optimal accuracy. Two datasets are utilized to evaluate the performance of the proposed model. The present work is unique in applying a feature extraction model with CNN for CAD detection. The experimental analysis shows that the proposed method achieves 99.2% and 98.73% prediction accuracy, with F1 scores of 98.95 and 98.82 for benchmark datasets. In addition, the outcome suggests that the proposed CNN model achieves the area under the receiver operating characteristic and precision-recall curve of 0.92 and 0.96, 0.91 and 0.90 for datasets 1 and 2, respectively. The findings highlight that the performance of the proposed feature extraction and CNN model is superior to the existing models.

Photocatalytic response in water pollutants with addition of biomedical and anti-leishmanial study of iron oxide nanoparticles.

Public health is a major concern globally, owing to the presence of industrial dyes in the effluent. Nanoparticles with green synthesis are an enthralling research field with various applications. This study deals with investigating the photocatalytic potential of Fe-oxide nanoparticles (FeO-NPs) for the degradation of methylene blue dye and their potential biomedical investigations. Biosynthesis using Anthemis tomentosa flower extract showed to be an effective method for the synthesis of FeO-NPs. The freshly prepared FeO-NPs were characterized through UV/Vis spectroscopy showing clear peak at 318 nm. The prepared FeO-NPs were of smaller size and spherical shape having large surface area and porosity with no aggregations. The FeO-NPs were characterized using XRD, FTIR, HRTEM, SEM and EDX. The HRTEM results showed that the particle size of FeO-NPs was 60-90 nm. The antimicrobial properties of FeO-NPs were investigated against two bacterial Staphylococcus aureus 13 (±0.8) and Klebsiella pneumoniae 6(±0.6) and three fungal species Aspergillus Niger, Aspergillus flavus, and Aspergillus fumigatus exhibiting a maximum reduction of 57% 47% and 50%, respectively. Moreover, FeO-NPs exhibited high antioxidant properties evaluated against ascorbic acid. Overall, this study showed high photocatalytic, antimicrobial, and antioxidant properties of FeO-NPs owing to their small size and large surface area. However, the ecotoxicity study of methylene blue degradation products showed potential toxicity to aquatic organisms.

Synthesis, Crystal Structure, Quantum Chemical Analysis, Electrochemical Behavior, and Antibacterial and Photocatalytic Activity of Co Complex with Pyridoxal-(S-Methyl)-isothiosemicarbazone Ligand.

New complex Co(III) with ligand Pyridoxal-S-methyl-isothiosemicarbazone, (PLITSC) was synthesized. X-ray analysis showed the bis-ligand octahedral structure of the cobalt complex [Co(PLITSC-H)2]BrNO3·CH3OH (compound 1). The intermolecular interactions governing the crystal structure were described by the Hirsfeld surface analysis. The structure of compound 1 and the corresponding Zn complex (([Zn(PLTSC)(H2O)2]SO4·H2O)) were optimized at the B3LYP/6-31 + G (d,p)/LanL2DZ level of theory, and the applicability was assessed by comparison with the crystallographic structure. The natural bond orbital analysis was used for the discussion on the stability of formed compounds. The antibacterial activity of obtained complexes towards S. aureus and E. coli was determined, along with the effect of compound 1 on the formation of free radical species. Activity of compound 1 towards the removal of methylene blue was also investigated. The voltammograms of these compounds showed the reduction of metal ions, as well as the catalyzed reduction of CO2 in acidic media.

Peroneus longus intra-tendinous ganglion cyst.

Ganglion cysts arising from tendons are uncommon lesions with an unknown cause. We present a case report of a 38-year-old female was diagnosed with an intra-tendinous ganglion cyst of the peroneus longus. She complained of right ankle swelling for 1 year and associated with pain. MRI revealed a peroneus longus intra-tendinous ganglion below the lateral malleolus with a thin wall. The ganglion cyst was surgically excised while the structure of the peroneus longus tendon was preserved. The clinical and functional outcomes were satisfactory after 1 year without recurrence.

Synthesis and characterization of a new meso-tetrakis (2,4,6-trimethylphenyl) porphyrinto) zinc(II) supported sodium alginate gel beads for improved adsorption of methylene blue dye.

Chemical modification of a biopolymer offers a simple strategy to realize new materials with added benefits. In this paper, meso-tetrakis(2,4,6-trimethylphenyl) porphyrinto) zinc(II) supported sodium alginate gel beads were successfully prepared, characterized, and used for the removal of a cationic dye from aqueous solution. The chemical structure of the prepared composite beads was confirmed by FT-IR, SEM, XRD and TGA/DTG techniques. Analytical data suggested that the sodium alginate beads and meso-tetrakis(2,4,6-trimethylphenyl) porphyrinto) zinc(II) complex interacted via non-covalent interaction (H-bonding) mode. The morphological micrographs showed spherical and smooth composite beads. The crosslinking of hydroxyl and carboxylate groups of the biopolymer with calcium ions and the incorporation of meso-tetrakis(2,4,6-trimethylphenyl) porphyrinto) zinc(II) into alginate matrix resulted in a small decrease of residual mass. The maximum adsorption capacities of methylene blue, at 20 °C, were found to be 52.3 mg/g and 34.8 mg/g for sodium alginate composite beads (3%) and plain sodium alginate beads, respectively. The adsorption process followed Freundlich isotherm and pseudo second order kinetics. The thermodynamic study displayed an exothermic and non-spontaneous process.