RESUMO
Polymeric materials are constantly exposed to aggressive environments, negatively impacting their mechanical and chemical properties. In salt, acid, or alkaline solutions, polymer materials degrade due to surface flaws, microcracks, or other irregularities. For the first time, this study considers the behaviour of coconut powder/coir-reinforced synthetic LDPE hybrid composite immersed in an aggressive (acidic) medium for 15, 30 and 45 days. The structural, mechanical, and frictional behaviour of the developed coir/coconut husk powder/LDPE hybrid composites were measured after ageing in hydrochloric acid (HCl) as potential materials for oil and gas applications. From the XRD patterns, the prominent reflections in the control samples increased with the acid ageing days, while less prominent reflections characterized the hybrid composites. The hardness of the reinforced samples immersed for 30 and 45 days (30B and 45A) showed the highest values of 0.28 Hv, while the control samples immersed for 15 days had the least hardness. The reinforced samples immersed for 15 and 30 days (15B and 30B) showed the lowest and highest fracture toughness, respectively. The control samples were observed to absorb little water after immersion for 144 h. The result showed that although the reinforced hybrid composites showed better mechanical properties, with an increase in the days of immersion in an aggressive medium, the properties became compromised compared to the un-reinforced samples. Hence, the applications of the produced reinforced polymers in the oil and gas industries may be limited.
RESUMO
The current study details the creation of synthetic hydroxyapatite (HAp) using a combination of catfish and bovine bones (C&B). This is done to design the optimum processing parameters and consolidate instructional strategies to develop HAp scaffolds for biomedical engineering. The HAp produced from the novel mix of the biogenic materials (C&B) was through calcination and supported with the sol-gel technique, sintering, and low-cold compaction pressure. The ideal preparation conditions were identified with the aid of the Box-Behnken statistical design in response surface methodology. To understand the physicochemical and mechanical properties of the formulation, analytical studies on the synthesized HAp were carried out. To establish a substantial relation between the physicomechanical properties of the produced HAp scaffolds, three parameters- sintering temperature, compaction loads, and holding times were used. In the evaluation, the sintering temperature was found to have the greatest impact on the material's physicomechanical properties, with compressive strength (13 MPa), porosity (49.45 %), and elastic modulus (2.216 GPa) being the most enhanced properties in that order. The physicomechanical characteristics of the HAp scaffolds were at their optimal at 900 °C, 1 h 18 min of holding time, and 311.73 Pa of compaction pressure. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) results showed that powders with a dominant HAp phase were produced at all runs, including the optimum run. Therefore, using a computationally effective methodology that is helpful for novelties in biomedical engineering education, this study demonstrates the optimal process for the synthesis of a novel matrix bone-derived HAp, showing the most significant relations liable for manufacturing medically suitable HAp scaffolds from the mixture of bovine and catfish bones.
