Detection and discrimination of sedative-hypnotics in spiked beverage dry residues using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy combined with chemometrics.

Drugs-facilitated crimes (DFCs) involve the incapacitation of victims under the influence of drugs. Conventionally, a drug administration act is often determined through the examination of biological samples; however, dry residues from any surface, such as drinking glass if related to a DFC could be a potential source of evidence. This study was aimed to establish an attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy coupled with chemometrics for the determination of spiked sedative-hypnotics from dry residues of a drug-spiked beverage. In this study, four sedative-hypnotics, namely diazepam, ketamine, nimetazepam, and xylazine were examined using ATR-FTIR spectroscopy. Subsequently, the ATR-FTIR profiles were compared and decomposed by principal component analysis (PCA) followed by linear discriminant analysis (LDA) for their detection and discrimination. Visual comparison of ATR-FTIR profiles revealed distinct spectra among the tested drugs. An initial unsupervised exploratory PCA model indicated the separation of four main sedative-hypnotics clusters, and the proposed PCA score-LDA model had allowed for a 100% accurate classification. Discrimination of sedative-hypnotics from a dry beverage previously spiked with these drugs was also possible upon an additional extraction procedure. In conclusion, ATR-FTIR coupled with PCA score-LDA model was useful in detecting and discriminating sedative-hypnotics, including those that had been previously spiked into a beverage.

An exploratory study on the handwritten allographic features of multi-ethnic population with different educational backgrounds.

Ethnicity, native and/or foreign language knowledge, as well as the learned writing systems potentially influence the development of an individual's handwriting. The unique education system consisting of National schools, Chinese-medium vernacular schools, Tamil-medium vernacular schools, and Islamic religious schools in Malaysia may have established specific characteristic handwritten allographic features that deserve investigation within the intelligence context. This study was aimed to explore handwritten allographic features of handwriting samples from 120 subjects (30 writers from four different educational backgrounds mentioned above). Characteristic features which could be attributed to the study groups were statistically analyzed and identified. In this study, thirteen allographic features, including letters "A", "B", "D", "H", "p", "T", "t", "w", "X" and "x", were found to be discriminative. Such information could serve to indicate the primary education system undergone by a writer; enabling the comparison of different handwriting profiles and allowing characterization of writers to a specific group of people.

Flow Injection Amperometric Measurement of Formalin in Seafood.

Formalin is illegally used as an antibacterial and a preservative in seafood products. It is extremely important for public health reasons to be able to simply, rapidly, and accurately detect formalin in fresh seafood. In this work, we developed a flow injection amperometric (FI-Amp) formalin sensor based on a glassy carbon electrode modified with a composite of palladium particles and carbon microspheres (PdPs-CMs/GCE). The CMs were decorated with PdPs via an electroless deposition method. The surface morphology of the CMs and the PdPs-CMs composite was characterized by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX). The electrochemical behavior and measurement of formalin at the PdPs-CMs/GCE was evaluated by cyclic voltammetry and amperometry. The modified electrode demonstrated good electrocatalytic performance for the oxidation of formalin. The synthesis method and FI-Amp operating conditions were optimized. Under the optimal conditions, the developed sensor showed a linear range of 0.025 to 15.00 mmol L-1 and a detection limit of 8 µmol L-1. Repeatability (RSD < 4.1%, n = 30), reproducibility (RSD = 0.25%, n = 5), stability (RSD = 3.2%, n = 80), and selectivity were good. The fabricated sensor achieved recoveries of formalin in seafood between 96 ± 1 to 105 ± 3 (n = 3).

Vortex-assisted dispersive liquid-liquid microextraction-gas chromatography (VADLLME-GC) determination of residual ketamine, nimetazepam, and xylazine from drug-spiked beverages appearing in liquid, droplet, and dry forms.

Presently, investigations of drug-facilitated crimes (DFCs) rely on the detection of substances extracted from biological samples following intake by the victim. However, such detection requires rapid sampling and analysis prior to metabolism and elimination of the drugs from the body. In cases of suspected DFCs, drug-spiked beverage samples, whether in liquid, droplet, or even dried form, can be tested for the presence of spike drugs and used as evidence for the occurrence of DFCs. This study aimed to quantitatively determine three sedative-hypnotics (ketamine, nimetazepam, and xylazine) from drug-spiked beverages using a vortex-assisted dispersive liquid-liquid microextraction-gas chromatography (VADLLME-GC) approach. In this study, a GC method was first developed and validated, followed by the optimization of the VADLLME protocol, which was then applied to quantify the target substances in simulated forensic case scenarios. The developed GC method was selective, sensitive (limit of detection: 0.08 µg/ml [ketamine]; 0.16 µg/ml [nimetazepam]; 0.08 µg/ml [xylazine]), linear (R2 > 0.99), precise (%RSD <7.2%), and accurate (% recovery: 92.8%-103.5%). Higher recoveries were achieved for the three drugs from beverage samples in liquid form (51%-97%) as compared to droplet (48%-96%) and dried (44%-93%) residues. The recovery was not hindered by very low volumes of spiked beverage and dried residues. In conclusion, the developed VADLLME-GC method successfully recovered ketamine, nimetazepam, and xylazine from spiked beverages that are likely to be encountered during forensic investigation of DFCs.

Nanocoral-like Polyaniline-Modified Graphene-Based Electrochemical Paper-Based Analytical Device for a Portable Electrochemical Sensor for Xylazine Detection.

A portable electrochemical device for xylazine detection is presented for the first time. An electrochemical paper-based analytical device (ePAD) was integrated with a smartphone. The fabrication of the ePAD involved wax printing, low-tack transfer tape, and cutting and screen-printing techniques. Graphene ink was coated on the substrate and modified with nanocoral-like polyaniline, providing an electron transfer medium with a larger effective surface area that promoted charge transfer. The conductive ink on the ePAD presented a thickness of 25.0 ± 0.9 µm for an effective surface area of 0.374 cm2. This sensor was then tested directly on xylazine using differential pulse voltammetry. Two linear responses were obtained: from 0.2 to 5 µg mL-1 and from 5 to 100 µg mL-1. The detection limit was 0.06 µg mL-1. Reproducibility was tested on 10 preparations. The relative standard deviation was less than 5%. The applicability of the sensor was evaluated with beverage samples spiked with trace xylazine. Recoveries ranged from 84 ± 4 to 105 ± 2%. The developed sensor demonstrated excellent accuracy in the detection of trace xylazine. It would be possible to develop the portable system to detect various illicit drugs to aid forensic investigations.

A Fabrication of Multichannel Graphite Electrode Using Low-Cost Stencil-Printing Technique.

Multichannel graphite electrodes (MGrEs) have been designed and fabricated in this study. A template was cut from an adhesive plastic sheet using a desktop cutting device. The template was placed on a polypropylene substrate, and carbon graphite ink was applied with a squeegee to the template. The size of the auxiliary electrode (AE) as well as the location of the reference electrode (RE) of MGrEs design were investigated. Scanning electron microscopy was used to determine the thickness of the ink on the four working electrodes (WEs), which was 21.9 ± 1.8 µm. Cyclic voltammetry with a redox probe solution was used to assess the precision of the four WEs. The intra-electrode repeatability and inter-electrode reproducibility of the MGrEs production were satisfied by low RSD (<6%). Therefore, the MGrEs is reliable and capable of detecting four replicates of the target analyte in a single analysis. The electrochemical performance of four WEs was investigated and compared to one WE. The sensitivity of the MGrEs was comparable to the sensitivity of a single WE. The MGrEs' potential applications were investigated by analyzing the nitrite in milk and tap water samples (recoveries values of 97.6 ± 0.4 to 110 ± 2%).

Temporal association of maternal weight gain with early-term and preterm birth and low birth weight babies.

BACKGROUND: Low birth weight and preterm or early-term babies may have a higher risk of poor health. One of the main factors is the weight gain of a pregnant woman during gestational weeks in the second and third trimesters. Changes in weight over a month in a pregnant woman might also have an impact on infant outcomes. This study aimed to investigate the association between maternal weight at different time points and low birth weight and preterm or early-term babies (premature babies). METHODS: A total of 156 pregnant women were recruited. Maternal weight was collected at different gestational weeks. Maternal age, body mass index, delivery mode, delivery week, and infant weight were also recorded. Maternal data were restructured into a person-period format before mixed-effects multiple logistic regression was used. Various weight variables with either a fixed effect or time-varying effects were tested in the model. RESULTS: Thirty (19.23%) women had delivered low birth weight or premature babies. Multiple logistic regression model demonstrated that mothers with higher increases in weight at 32 weeks of gestation than that in the predelivery stage had a lower probability of having a low birth weight or premature baby (odds ratio [OR] = 0.64; 95% CI, 0.49-0.85; p < 0.001). Women with a weight increase of more than 2 kg in a 4-week gestation period had a higher probability of having a low birth weight or premature baby than those with an increment of <1 kg (OR = 8.43; 95% CI, 2.90-24.54; p < 0.001). CONCLUSION: An increase in weight gain after 32 weeks was shown to reduce the risk of low birth weight and premature babies. Maternal weight monitoring was suggested to be conducted every 4 weeks to minimize the chance of having a low birth weight and premature baby.

Quick determination and discrimination of commercial hand sanitisers using attenuated total reflectance-Fourier transform infrared spectroscopy and chemometrics.

Due to the outbreak of the COVID-19 pandemic, practicing personal hygiene such as frequent hand sanitising has become a norm. The making of effective hand sanitiser products should follow the recommended formulations, but the high demand worldwide for such affordable products could have made them a candidate for counterfeiting, thus deserving forensic determination and profiling for source determination or supply chain tracing. In this study, determination and discrimination of hand sanitisers was carried out by employing attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy combined with chemometrics. Fifty commercially available hand sanitisers were obtained from the market and analysed. ATR-FTIR profiles of each sanitiser were compared and decomposed by principal component analysis (PCA) followed by linear discriminant analysis (LDA). Physical observation enabled the discrimination of seven samples based on their respective colours, the presence of beads and their colours, and the physical forms of formulations. Subsequently, eight distinct patterns were observed through visual comparison of ATR-FTIR profiles of the remaining 43 samples. An initial unsupervised exploratory PCA model indicated the separation of two main groups with ATR-FTIR profiles similar to those of ethanol and isopropanol, respectively. The PCA score-LDA model provided good predictions, with a 100% correct classification into eight different groups. In conclusion, this study demonstrated a quick determination and discrimination of hand sanitiser samples, allowing screening for any restricted components and sample-to-sample comparison.

Electrochemical Sensor for Methamphetamine Detection Using Laser-Induced Porous Graphene Electrode.

A 3D porous graphene structure was directly induced by CO2 laser from the surface of Kapton tape (carbon source) supported by polyethylene terephthalate (PET) laminating film. A highly flexible laser-induced porous graphene (LI-PGr) electrode was then fabricated via a facile one-step method without reagent and solvent in a procedure that required no stencil mask. The method makes pattern design easy, and production cost-effective and scalable. We investigated the performance of the LI-PGr electrode for the detection of methamphetamine (MA) on household surfaces and in biological fluids. The material properties and morphology of LI-PGr were analysed by scanning electron microscopy (SEM), energy dispersive x-ray (EDX) and Raman spectroscopy. The LI-PGr electrode was used as the detector in a portable electrochemical sensor, which exhibited a linear range from 1.00 to 30.0 µg mL-1 and a detection limit of 0.31 µg mL-1. Reproducibility was good (relative standard deviation of 2.50% at 10.0 µg mL-1; n = 10) and anti-interference was excellent. The sensor showed good precision and successfully determined MA on household surfaces and in saliva samples.

Profiling of cured residue of solvent-based adhesives by attenuated total reflectance-Fourier transform infrared spectroscopy with chemometrics for forensic investigation.

Abuse of solvent-based adhesives jeopardizes world population, especially the young generation. Adhesive-related exhibits encountered in forensic cases might need to be determined if they could have come from a particular source or to establish link between cases or persons. This study was aimed to discriminate solvent-based adhesives, especially to aid forensic investigation of glue sniffing activities. In this study, thirteen brands with three samples each, totaling at 39 adhesive samples, were analyzed using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy followed by chemometric methods. Experimental output showed that adhesive samples utilized in this study were less likely to change in their ATR-FTIR profiles over time, at least up to 2 months. No interference from plastic materials was noticed based on ATR-FTIR profile comparison. Physical examination could differentiate the samples into two groups, namely contact adhesives and cement adhesives. A principal component analysis-score linear discriminative analysis (PC-score LDA) model resulted in 100% and 98.6% correct classification in discriminating the two groups of adhesive samples, forming seven discriminative clusters. Test set with adhesive samples applied glass slide and plastic substrates also demonstrated a 100% correct classification into their respective groups. As a conclusion, the method allowed for discrimination of adhesive samples based on the spectral features, displaying relationship among samples. It is hoped that this comparative information is beneficial to trace the possible source of solvent-based adhesives, whenever they are recovered from a crime scene, for forensic investigation.

Forensic Significance of Gunshot Impact Marks on Inanimate Objects: The Need for Translational Research.

Wherever an impact mark is found, either on the surface or on the recovered projectile, it is important for forensic investigators to extract useful information in solving shooting-related cases. This article reviews a collection of works on examination of impact marks upon striking of projectiles on inanimate objects, emphasizing on the retrievable information from a shooting scene and their forensic significance in shooting event reconstruction. Literature suggested that impact marks on target surfaces and the degree of deformation on striking projectiles vary according to different combinations of ammunition and surface materials. It was noted that conditions in real-case scenarios further differed unpredictably in comparison with controlled studies, where forensic investigation should be treated as case-specific basis. Furthermore, the way forensic science is researched and applied operationally has to be reconsidered to reduce the gap via translational approach for more effective use of forensic evidence.

Inter-rater reliability of vehicle color perception for forensic intelligence.

The topcoat color of motor vehicles offers vital information while investigating vehicular accidents, especially in instance of hit-and-run, since witnesses seldom perceive and retain the plate details. Differences in color perceptions among individuals with normal vision may lead to confusion in determining the color of the car involved. In this way, witnesses of crash accidents could potentially initiate flawed leads in forensic investigation, and thus affect the administration of justice. In this study, the inter-rater reliability of vehicle color determination by different volunteers was explored. Six individuals observed the topcoat colors of 500 stationary and 500 moving vehicles from five locations, employing a common system of color gradation. The outcome was binary: the vehicle color was either a "match" or "non-match". This was followed by statistical analysis in terms of the colors' frequencies and inter-rater reliability, based on which more suitable color descriptions were determined for subsequent comparisons of stationary and moving vehicles. Higher match frequencies and greater inter-rater reliability were observed when color gradations were disregarded. The frequency of correct matches could have been closely related to their relative on-the-road distribution, regardless of the statuses of observed vehicles. It was also found that black and white were associated with a greater number of matches than were intermediate colors, which should be carefully interpreted during forensic investigation to avoid wrong leads. In conclusion, the present study demonstrated the forensic significance of vehicle topcoat color determination, particularly in cases where witness statements are crucial.

Contactless Visualization of Latent Fingerprints on Nonporous Curved Surfaces of Circular Cross Section-A Statistical Evaluation on the Materials as Plane Mirror.

A new contactless technique for latent fingerprint visualization on nonporous curved surfaces of circular cross section was introduced by Low et al. (1). The technique utilizes a plane mirror to convey the light rays toward the inspected surfaces for latent fingerprint visualization. This research activity came up as an extension of the previous study which utilized an aluminum plate as the plane mirror to illuminate the inspected surfaces. Dulling spray was used to increase the diffuse component of the reflective aluminum plate. However, the amount of dulling spray will affect the uniformity of the illumination on the inspected curved surfaces. In this study, a study on the new materials for the plane mirror was carried out. Coated aluminum, opal, and ground glass diffusers were selected as the new materials. The performance of the new materials was compared to the aluminum based on the quality of the captured images on various nonporous cylindrical surfaces. A statistical approach known as randomized complete block design was used to design the experiment. The quality of the captured images was obtained using Spectral Image Validation and Verification. Two-way analysis of variance and Fisher's least significant difference test were used to analyze the quality of the images. From the results of the statistical analysis, coated aluminum has the best performance compared to aluminum, opal, and ground glass diffusers.

Contactless Visualization of Latent Fingerprints on Nonporous Curved Surfaces of Circular Cross Section.

Nondestructive techniques for gathering evidence are important in the field of forensics. Due to the geometry of the substrates, nondestructive visualization of fingermarks on curved surfaces remains challenging. A novel contactless technique was developed for visualizing and recording fingermark patterns on nonporous curved surfaces of circular cross section. The technique utilizes a plane mirror to transmit rays from a light source to illuminate the area of interest for fingermark visualization. The fingermark acquisition system consists of a digital single-lens reflex (SLR) camera, a plane mirror, and a white light source. Mathematical equations are used to calculate the mirror size. Experiments were performed on various curved surfaces to determine the feasibility and effectiveness of the technique. Spectral Image Validation and Verification (SIVV) was used to analyze the captured images. The results of this study indicate that the technique described here is able to reveal fingermark patterns on curved surfaces of circular cross section.

A robust background correction algorithm for forensic bloodstain imaging using mean-based contrast adjustment.

Background correction algorithm (BCA) is useful in enhancing the visibility of images captured in crime scenes especially those of untreated bloodstains. Successful implementation of BCA requires all the images to have similar brightness which often proves a problem when using automatic exposure setting in a camera. This paper presents an improved background correction algorithm (BCA) that applies mean-based contrast adjustment as a pre-correction step to adjust the mean brightness of images to be similar before implementing BCA. The proposed modification, namely mean-based adaptive BCA (mABCA) was tested on various image samples captured under different illuminations such as 385 nm, 415 nm and 458 nm. We also evaluated mABCA of two wavelengths (415 nm and 458 nm) and three wavelengths (415 nm, 380 nm and 458 nm) in enhancing untreated bloodstains on different surfaces. The proposed mABCA is found to be more robust in processing images captured in different brightness and thus overcomes the main issue faced in the original BCA.

Enhancement of seminal stains using background correction algorithm with colour filters.

Evidence in crime scenes available in the form of biological stains which cannot be visualized during naked eye examination can be detected by imaging their fluorescence using a combination of excitation lights and suitable filters. These combinations selectively allow the passage of fluorescence light emitted from the targeted stains. However, interference from the fluorescence generated by many of the surface materials bearing the stains often renders it difficult to visualize the stains during forensic photography. This report describes the use of background correction algorithm (BCA) to enhance the visibility of seminal stain, a biological evidence that fluoresces. While earlier reports described the use of narrow band-pass filters for other fluorescing evidences, here, we utilize BCA to enhance images captured using commonly available colour filters, yellow, orange and red. Mean-based contrast adjustment was incorporated into BCA to adjust the background brightness for achieving similarity of images' background appearance, a crucial step for ensuring success while implementing BCA. Experiment results demonstrated the effectiveness of our proposed colour filters' approach using the improved BCA in enhancing the visibility of seminal stains in varying dilutions on selected surfaces.

Application of acid-modified Imperata cylindrica powder for latent fingerprint development.

A novel powdering material that utilizes acid-modified Imperata cylindrica (IC) powder for the development of fingermarks was studied. Experiments were carried out to determine the suitability, adherence quality and sensitivity of the acid-modified IC powder. Fingermarks of different constituents (eccrine, sebaceous and natural fingermarks) on different types of surfaces were used. Acid-modified IC powder was also used to develop fingermarks of different ages as well as aged fingermarks recovered from the water. From the visual inspection, acid-modified IC powder was able to interact with different fingermark constituents and produced distinct ridge details on the examined surfaces. It was also able to develop aged fingermarks and fingermarks that were submerged in water. A statistical comparison was made against the Sirchie® Hi-Fi black powder in terms of the powders' sensitivity and quality of the developed natural fingermarks. The image quality was analyzed using MITRE's Image Quality of Fingerprint (IQF) software. From the experiments, acid-modified IC powder has the potential as a fingermark development powder, although natural fingermarks developed by Sirchie® black powder showed better quality and sensitivity based on the results of the statistical comparison.

Study of the Behaviors of Gunshot Residues from Spent Cartridges by Headspace Solid-Phase Microextraction-Gas Chromatographic Techniques.

Gunshot residues, produced after shooting activity, have acquired their importance in analysis due to the notoriety of firearms-related crimes. In this study, solid-phase microextraction was performed to extract the headspace composition of spent cartridges using 85-µm polyacrylate fiber at 66°C for 21 min. Organic compounds, that is, naphthalene, 2,6-dinitrotoluene, 2,4-dinitrotoluene, diphenylamine, and dibutyl phthalate were detected and analyzed by gas chromatography-flame ionization detection technique. Evaluation of chromatograms for diphenylamine, dibutyl phthalate, and naphthalene indicates the period after a gunshot was discharged, whether it was 1 days, 2-4 days, <5 days, 10 days, 20 days, or more than 30 days ago. This study revealed the potential effects of environmental factors such as occasional wind blow and direct sunlight on the estimation of time after spent cartridges were discharged. In conclusion, we proposed reliable alternative in analyzing the headspace composition of spent cartridges in a simulated crime scene.

Optimization of headspace solid-phase microextraction technique for extraction of volatile smokeless powder compounds in forensic applications.

Smokeless powders are low explosives and are potentially found in cases involving firearms and improvised explosive devices. Apart from inorganic compound analysis, forensic determination of organic components of these materials appears as a promising alternative, especially the chromatographic techniques. This work describes the optimization of a solid-phase microextraction technique using an 85 µm polyacrylate fiber followed by gas chromatography-flame ionization detection for smokeless powder. A multivariate experimental design was performed to optimize extraction-influencing parameters. A 2(4) factorial first-order design revealed that sample temperature and extraction time were the major influencing parameters. Doehlert matrix design has subsequently selected 66°C and 21 min as the compromised conditions for the two predetermined parameters. This extraction technique has successfully detected the headspace compounds of smokeless powders from different ammunition types and allowed for their differentiation. The novel technique allows more rapid sample preparation for chromatographic detection of smokeless powders.