Data for the industrial and municipal environmental wastes hazard contaminants assessment with integration of RES2D techniques and Oasis Montaj software.

Industrial, and municipal wastes are part of the main sources of environmental hazards as well as groundwater and surface water pollutions. If not well composed, treated, and safely disposed, it could permeate through the subsurface lithologies by reaching down to the underground water aquifers, particularly in zones of unprotected aquifer units. Pollutants, most especially the landfills leachates that encompassed organic contaminants, ammonia, nitrates, total nitrogen, suspended solids, heavy metals and soluble inorganic salts, i.e., soluble nitrogen, sulphur compound, sulphate and chlorides, could posed undesirable environmental impacts due to inappropriate disposals that may give rise to gaseous fumes and leachate formations. An electrical resistivity geophysical technique utilizing the RES2D no-invasive, cost-effective and rapid method of data collection was integrated with the 3D Oasis Montaj software to approximate the volume of the generated rectangular prism model of the contaminants delineated from mixtures of the industrial, and municipal wastes plumes to be 312,000 m 3.

Data for the subsurface characterization of Pahang River Basin with the application of Transient Electromagnetic geophysical surveys.

The Transient Electro-Magnetic (TEM) geophysical technique was deployed to map and characterized the subsurface of Pahang River Basin along the East Coast Peninsula Malaysia. The data aimed at differentiating between the massive zones and the weak zones within the region, to also assess and differentiate the subsurface structures and comes up with recommendations for policy decision, formulation and plans on the flooding impact, surface water and groundwater managements, in addition to other environmental related issues ravaging the area. The data presented in this paper, showed the properties of the subsurface rocks underlain the region as beneficial to the Agriculturists; Climatologists; Engineers; Environmentalists; Geoscientists, Hydrologists and Policy formulation officers. The TEM data collection utilized a 100 m x 100 m single loop coil for both the Transmitter (Tx) loop and the Receiver (Rx) loop to produce a total surface area coverage of 10,000 m2 per survey line along a single profile. The total area covered in the data extended across an average area of 30 km x 40 km in parts of Maran, Temerloh and Jerantut districts, within the State of Pahang, East Coast, Peninsula Malaysia. The conductivity data recorded varied from -20 mS/m to about 440 mS/m at a maximum depth of about 375 m. On the other hand, the resistivity data recorded varied from 0 Oh-m to about 1000 Oh-m. The information derived from the data are intended for potential abstraction by the Malaysian Groundwater Management Board; the Department of Mineral and Geoscience; Department of Irrigation and Drainage; the Pahang State Water Board, and the Department of Agriculture.