Highly Uniform Nanodiamond-Graphene Composites Microspheres for Electrocatalytic Hydrogen Evolution.

To progress the clean hydrogen-gas-based energy economy, there is a demand for cost-effective, highly efficient catalysts to facilitate the hydrogen evolution reaction process (HER). Due to the amazing catalytic capabilities of two-dimensional materials, extensive research has been done on these structures. However, most of the described syntheses take a lot of time, are challenging, and are ineffective. The present work demonstrates the performance of the recently reported nanodiamond/graphene composite microsphere ND-GCSs as a catalyst for HER. These spheres were produced via the microwave-irradiation approach. A modified process was adopted to improve the particle size uniformity and yield. The prepared composite spheres showed very interesting catalytic activity for the HER when assembled on a screen-printed carbon electrode. The prepared ND-GCSs@SPCE showed a significant shift of the onset potential to ca. -450 mV and a small Tafel slope value of ca. 85 mV/decade. The electron transfer was drastically enhanced with a tremendous decrease in charge transfer resistance to ca. 265 Ω. The electrocatalyst showed excellent long-term stability for the HER application. Additionally, this novel composite structure might be beneficial for diverse applications including batteries, supercapacitors, catalyst supports, and more.

Thermoelectric and power generation of 2D structured pieces of graphene-nanodiamonds nanocomposite.

Recently, the ultrafine 2D structured nanocomposite of graphene (Gr)-nanodiamonds (NDs) produced by a microwave-assisted chemical route was found to have attractive structural properties. This new 2D structured nanocomposite may be employed for a wide spectrum of applications including thermoelectricity (TE) applications. It is well established that TE materials should be highly effective to be used for designing operative devices for powering or cooling small devices. To fulfill such an objective, the functional TE material should possess a high-power factor and low thermal conductivity. In this study, NDs were successfully integrated into Gr with a magnificent structural alteration to the Gr layers/sheets. This structural modification was found to impact the TE final outcome above and below room temperature (RT). The obtained results showed that at 215 K the power factor value was increased from 4 µW m-1 K-2 for the pure Gr to ∼20 µW m-1 K-2 for the Gr-NDs nanocomposite. At higher T, e.g. 365 K, these values slightly decreased, but with clear superiority for the Gr-NDs nanocomposite. The thermal conductivity of the Gr-NDs nanocomposite was significantly reduced to ∼12% of that of the pure Gr, which could reflect a significant enhancement in the value of the figure of merit by >45 times. Furthermore, the output power generated by a single small leg module made of the Gr-NDs nanocomposite was measured and found to be measurable. The obtained values are still relatively low for practical application, but this newly produced material has great potential to be further developed for TE applications.

Thermoelectric Power Generation of TiS2/Organic Hybrid Superlattices Below Room Temperature.

Recently, the n-type TiS2/organic hybrid superlattice (TOS) was found to have efficient thermoelectric (TE) properties above and near room temperature (RT). However, its TE performance and power generation at the temperature gradient below RT have not yet been reported. In this work, the TE performance and power generation of the TOS above and below RT were investigated. The electrical conductivity (σ) and Seebeck coefficient (S) were recorded as a function of temperature within the range 233-323 K. The generated power at temperature gradients above (at ΔT = 20 and 40 K) and below (at ΔT = -20 and -40 K) RT was measured. The recorded σ decreased by heating the TOS, while |S| increased. The resulting power factor recorded ~100 µW/mK2 at T = 233 K with a slight increase following heating. The charge carrier density and Hall mobility of the TOS showed opposite trends. The first factor significantly decreased after heating, while the second one increased. The TE-generated power of a single small module made of the TOS at ΔT = 20 and 40 K recorded 10 and 45 nW, respectively. Surprisingly, the generated power below RT is several times higher than that generated above RT. It reached 140 and 350 nW at ΔT = -20 and -40 K, respectively. These remarkable results indicate that TOS might be appropriate for generating TE power in cold environments below RT. Similar TE performances were recorded from both TOS films deposited on solid glass and flexible polymer, indicating TOS pertinence for flexible TE devices.

Carbon Nanoparticles Extracted from Date Palm Fronds for Fluorescence Bioimaging: In Vitro Study.

Numerous studies have been reported on single- and multicolored highly fluorescent carbon nanoparticles (FCNPs) originating from various sources and their potential applications in bioimaging. Herein, multicolored biocompatible carbon nanoparticles (CNPs) unsheathed from date palm fronds were studied. The extracted CNPs were characterized via several microscopic and spectroscopic techniques. The results revealed that the CNPs were crystalline graphitic and hydrophilic in nature with sizes ranging from 4 to 20 nm. The unsheathed CNPs showed exemplary photoluminescent (PL) properties. They also emitted bright blue colors when exposed to ultraviolet (UV) light. Furthermore, in vitro cellular uptake and cell viability in the presence of CNPs were also investigated. The cell viability of human colon cancer (HCT-116) and breast adenocarcinoma (MCF-7) cell lines with aqueous CNPs at different concentrations was assessed by a cell metabolic activity assay (MTT) for 24 and 48 h incubations. The results were combined to generate dose-response curves for the CNPs and evaluate the severity of their toxicity. The CNPs showed adequate fluorescence with high cell viability for in vitro cell imaging. Under the laser-scanning confocal microscope, the CNPs with HCT-116 and MCF-7 cell lines showed multicolor fluorescence emissions, including blue, green, and red colors when excited at 405, 458, and 561 nm, respectively. These results prove that unsheathed CNPs from date palm fronds can be used in diverse biomedical applications because of their low cytotoxicity, adequate fluorescence, eco-friendly nature, and cheap production.

Structural, morphological, and optical properties of carbon nanoparticles unsheathed from date palm fronds.

Several studies have reported the synthesis of carbon nanoparticles (CNPs) by various methods. In this study, an easy one-step process to unsheathe CNPs from date palm fronds through a top-down ball milling method has been reported. The CNPs were characterized using various spectroscopic and microscopic methods to determine their structural and morphological features, optical properties, crystallinity, physicochemical properties, and particle stability. Transmission electron microscopy (TEM) revealed that the obtained CNPs' size ranged from 4 to 22 nm in a crystalline form. Scanning electron microscopy (SEM) confirmed their spherical shape, while the maximum photoluminescence (PL) intensity was recorded at 464 nm when excited at 375 nm. The unsheathed CNPs produced a good quantum yield (QY) of 3.24%. Furthermore, the CNPs exhibited high Raman ratios of I D/I G and I 2D/I G with values of 0.59 and 0.04, respectively, verifying their multilayer crystalline graphitic nature. These Raman ratios also agree with the X-ray diffractometry (XRD) results. The CNPs' sp2 and sp3 carbon bonds were confirmed by X-ray photoelectron spectroscopy (XPS), with oxygen on the surface forming carboxyl and carbonyl groups with no other observable impurities. Furthermore, the extracted CNPs showed excellent PL properties for up- and down-conversion. These properties are exemplary for low-cost biomass with potential applications in biomedicine. Therefore, the extracted CNPs reported in this study have potential applications in optical imaging.

ASSESSMENT OF NATURALLY OCCURRING RADIONUCLIDES IN MALAYSIA'S BUILDING MATERIALS.

The activity concentrations of 226Ra, 232Th and 40K radionuclides from common building materials used by Malaysian people for construction purposes were studied using High-Purity Germanium (HPGe) detector. The measured activity concentrations of the aforementioned radionuclides range from 10 ± 1 Bq kg-1 (limestone) to 155 ± 61 Bq kg-1 (feldspar), 12 ± 3 Bq kg-1 (limestone) to 274 ± 8 Bq kg-1 (kaolin) and 62 ± 19 Bq kg-1 (limestone) to 1114 ± 20 Bq kg-1 (pottery stone) for 226Ra, 232Th and 40K, respectively. The measured activity concentrations of the natural radionuclides reported herein were found to be in accordance with other previous studies. In general, the activity concentration of the natural radionuclides revealed that all the determined values were below the recommended limit.