Enhancing Presurgical Infant Orthopedic Appliances: Characterization, Mechanics, and Biofilm Inhibition of a Novel Chlorhexidine-Halloysite Nanotube-Modified PMMA.

Objectives: This in vitro study aimed to develop a novel nanocomposite acrylic resin with inherent antimicrobial properties. This study evaluated its effectiveness against microbial biofilm formation, while also assessing its physical and mechanical properties. Methods: Polymethylmethacrylate (PMMA) was modified with four different concentrations of chlorhexidine halloysite nanotubes (CHX-HNTs): 1%, 1.5%, 3%, and 4.5 wt.% by weight, along with a control group (0 wt.% CHX-HNTs). The biofilm inhibition ability of the modified CHX-HNTs acrylic against Candida albicans, Staphylococcus aureus, Streptococcus pneumoniae, and Streptococcus agalactiae was assessed using microtiter biofilm test. In addition, ten samples from each group were then tested for flexural strength, surface roughness, and hardness. Statistical analysis was performed using one-way ANOVA and Tukey's test for comparison (P < 0.05). Results: CHX-HNTs effectively reduced the adhesion of Candida albicans and bacteria to the PMMA in a dose-dependent manner. The higher the concentration of CHX-HNTs, the greater the reduction in microbial adhesion, with the highest concentration (4.5 wt.%) showing the most significant effect with inhibition rates ≥98%. The addition of CHX-HNTs at any tested concentration (1%, 1.5%, 3%, and 4.5 wt.%) did not cause any statistically significant difference in the flexural strength, surface roughness, or hardness of the PMMA compared to the control group. Conclusions: The novel integration of CHX-HNT fillers shows promising results as an effective biofilm inhibitor on acrylic appliances. This new approach has the potential to successfully control infectious diseases without negatively affecting the mechanical properties of the acrylic resin. Clinical Relevance. The integration of CHX-HNTs into presurgical infant orthopedic appliances should be thoroughly assessed as a promising preventive measure to mitigate microbial infections. This evaluation holds significant potential for controlling infectious diseases among infants with cleft lip and palate, thereby offering a valuable contribution to their overall well-being.

Occlusal Features and Temporomandibular Joint Disorder: A Cross-Sectional Study.

Background: Understanding the correlation between temporomandibular joint disorder (TMD) parameters and various occlusal features can play a significant role in diagnosing and treating occlusal problems and their potential consequences on TMD. Objectives: To investigate the relationship of occlusal features and some of the TMD parameters. Study Design and Sampling. The current cross-sectional study was conducted on 200 TMD patients seeking dental treatment at different dental centers in Baghdad city, aged 18-35 years. All participants underwent assessment for occlusal features, which were molar and canine classifications, overjet, posterior buccal or lingual crossbites, and overbites, and TMD parameters (muscle pain, TMJ pain, and clicking) using the Chi-square test for statistical analysis. Results: Regarding molar classification, there were strong positive correlations between subjects with TMD and having different molar classifications (class I, II, and III) bilaterally or unilaterally; furthermore, there were strong positive correlations between subjects with TMD and having different canine classifications. Moreover, there were significant correlations between subjects with increased, normal, or decreased overjet and the TMD parameters. In addition, there were weak positive correlations between TMD occurrence and buccal or lingual posterior crossbite. On the other hand, there were significant correlations between subjects with a decreased overbite and the presence of TMD parameters. Conclusion: TMD had a multifactorial background rather than dependability on a specific molar or canine classification type. There was also a correlation between overjet and TMD muscle pain, while decreased overbite was correlated to muscle and TMJ pain. Conversely, there is no vital correlation between posterior buccal or lingual crossbite occurrence and TMD parameters.

Caregivers' Experience with Lip Taping as a Presurgical Orthopedic Treatment for Cleft Lip and Palate Defects.

BACKGROUND: This study aimed to assess caregivers' experiences and perceptions of applying lip taping as presurgical orthopedic therapy (PSO) for infants with a cleft lip and palate. METHODS: A retrospective survey was conducted, inviting parents to respond to a series of structured questions between September 2022 and June 2023. The questionnaire focused on evaluating parents' experience with lip taping, a crucial component of PSO. Descriptive statistics and the Chi-square test were employed to analyze relationships between categorical variables. RESULTS: Of the 157 participants, overall, 122 completed the survey, forming the dataset for analysis. A majority (90.0%) reported sufficient experience in using lip taping and no major difficulties with lip taping application. Caregivers with higher education levels exhibited a significantly positive correlation (p = 0.015). Additionally, 93.4% confirmed the efficacy of lip taping for premaxillary segment retraction, with this outcome being correlated with caregivers' knowledge and education (p = 0.008). Interestingly, caregivers' age also demonstrated a substantial association (p = 0.020). CONCLUSIONS: While a vast majority expressed positive experiences with lip taping as a presurgical treatment, continuous, tailored education on cleft lip and palate is imperative. This education should be directed towards caregivers and individuals offering direct support to parents of children with CLP, ensuring optimal care and preparation for surgical treatment.

The accuracy and retention of presurgical infant orthopaedics constructed from different polymer materials: A comparative study.

Objectives: This laboratory-based study aimed to evaluate and compare the accuracy and retention of moulding plates when used as pre-surgical orthopaedic appliances (PSIOs) for infants with cleft lip and/or palate (CL/P). Methods: Ten moulding plates were fabricated from three different materials (total sample size: 30), including polymethyl methacrylate (PMMA), a hard clear aligner (PET-G polymer), and a dual-layered hard and soft clear aligner (mixed PET-G/EVA) on ten three-dimensional (3D) printed working models. Accuracy was evaluated by measuring the virtual gap between the data acquired from the moulding plate and the working model after the optical scanning at each of the designated 36 points for each plate. Exocad software was used to facilitate all virtual alignments and measurements. Retention was measured using a digital gauge that quantified the traction force required to separate the plates from the retention test cast (a soft resin printed cast). Results: PET-G plates exhibited the best fit with the working cast, with overall adaptations of 0.146 ± 0.012 for PET-G, 0.250 ± 0.073 for PET-G/EVA, and 0.294 ± 0.113 for PMMA. For region-specific misfit, PET-G plates exhibited superior accuracy across all regions, with mean discrepancies of 0.16 ± 0.08 mm, 0.15 ± 0.061 mm, and 0.12 ± 0.128 mm in the anterior, middle, and posterior regions, respectively. Retention for PET-G was significantly higher than the other materials, with a mean of 3.34 N ± 0.487, as opposed to 1.65 N ± 0.331for PMMA and 1.27 N ± 0.239 for PET-G/EVA (P < 0.05). Conclusions: Moulding plates constructed from PET-G exhibited a better fit and higher retention than those made from PET-G/EVA and PMMA. Clinical significance: Collectively, our findings suggest that the selection of PET-G for PSIO appliances could have clinical significance by potentially improving treatment outcomes in infants with CL/P.

Enhanced antimicrobial efficacy of chlorhexidine-encapsulated halloysite nanotubes incorporated in presurgical orthopedic appliances: an in vitro, controlled study.

AIMS AND OBJECTIVE: Presurgical infant's orthopedic appliances (PSIOs) play an increasingly crucial role in the interdisciplinary management of neonatal CLP, aiming to improve and maintain adequate nasolabial aesthetics, followed by primary lip/nasal surgery in both unilateral and bilateral CLP cases. The use of PSIOs in cleft lip and palate patients can lead to contamination with oral microflora, acting as a potential reservoir for infectious microorganisms. Acrylic surfaces might provide retention niches for microorganisms to adhere, and inhabit, which is difficult to control in immunocompromised patients, thus predisposing them to increased infection risks. The objective of this multi-assay in vitro study was to investigate the effects of incorporating chlorhexidine-loaded halloysite nanotubes (CHX-HNTs) fillers on the morphological, cytotoxic, release, and antimicrobial characteristics of self-cured acrylic polymethyl methacrylate (PMMA) material used in pre-surgical orthopedic appliances. METHODS: Disk-shaped PMMA specimens were prepared with varying proportions of CHX-HNTs. A control group without any addition served as a reference, and four experimental samples contained a range of different concentrations of CHX-HNTs (1.0, 1.5, 3, and 4.5 wt%). The antimicrobial efficacy was assessed using an agar diffusion test against common reference microorganisms: Candida albicans, Staphylococcus aureus, Streptococcus pneumoniae, and Streptococcus agalactiae. Cytotoxicity was examined using the L929 cell line (mouse fibroblasts) through a (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide, MTT) cell viability assay. The release kinetics of CHX were monitored using UV-spectral measurements. The statistical analysis used a one-way ANOVA followed by Tukey's post hoc test. RESULTS: The integration of CHX-HNTs in PMMA exhibited a substantial dose-dependent antifungal and antibacterial effect against microorganisms at tested mass fractions (1.0 to 4.5 wt%). CHX release was sustained for up to 60 days, supporting prolonged antimicrobial activity. Furthermore, no significant cytotoxicity was determined in the L929 fibroblast cell line (control), indicating the biocompatibility of the CHX-HNTs-enhanced PMMA. CONCLUSION: Incorporating CHX-HNTs in PMMA successfully enhanced its antimicrobial properties, providing sustained CHX release and superior antimicrobial efficacy. These findings demonstrate the potential of antimicrobial nanoparticles in dental therapies to improve therapeutic outcomes. However, rigorous further clinical trials and observational studies are warranted to validate the practical application, safety, and efficacy. CLINICAL RELEVANCE: This study has the potential to make a major impact on the health of infants born with cleft lip and palate by helping to reduce the prevalence of infectious illnesses. The incorporation of CHX-HNTs into PMMA-based appliances is a novel promising preventive approach to reduce microbial infections.

Oral flora and functional dysbiosis of cleft lip and palate patients: A scoping review.

AIMS: This scoping review aimed to conduct an assessment of the current literature on specific ecological changes in the oral microbiota of individuals living with cleft lip and/or palate. METHODS: All studies that assess oral microbiota and ecological changes distinct of individuals living with cleft lip and/or palate were included. Ovid MEDLINE and EMBASE databases were used, using planned search keywords. Included articles were grouped into cohort, cross-sectional, case-control, and retrospective reviews. RESULTS: A total of 164 eligible title articles were recognized. Of these, 32 full-text studies were included in the present review. All the included articles were published between 1992 and 2022. These studies were two retrospective studies, two review studies, and the remaining (n = 28) were observational studies. CONCLUSION: The oral flora of cleft lip and/or palate patients has been shown in scientific studies to have an increased frequency of potentially pathogenic fungal and bacterial colonization, particularly Candida species, Staphylococcus aureus, Lactobacili and Streptococci mutans. This may influence oral diseases and post-operative repair complications, potentially necessitating further surgical intervention.

Accuracy and Retention of Molding Plates Used for Infants with Cleft Lip and Palate Fabricated from Different Materials: A Cross-Sectional Clinical Study.

OBJECTIVES: The study aimed to comparatively assess the accuracy and retention of molding plates made of polyethylene terephthalate modified with glycol (PET-G) and polymethyl methacrylate (PMMA) materials, while also investigating the effect of adhesive addition on retention. DESIGN: A cross-sectional clinical study. PATIENTS/SETTING: The study included 30 infants diagnosed with non-syndromic cleft lip and palate (16 unilateral, 14 bilateral). Two molding plates were fabricated for each infant, and their accuracy and retention were evaluated. The data were analyzed using independent t-tests, Mann-Whitney U tests, and Wilcoxon rank tests. MAIN OUTCOME MEASURES: Accuracy: The accuracy of the molding plates was assessed by measuring the virtual gap between the inner surface of the plates and their working cast using Exocad software. The accuracy was evaluated in different regions (anterior, middle, and posterior) and compared between PET-G and PMMA materials. Retention: The retention of the molding plates was measured using a digital force gauge, which recorded the force required to dislodge the plates from the infant's mouth. The retention was compared between PET-G and PMMA materials, as well as the effect of adhesive addition on retention. Overall adaptation; PET-G plates showed a significantly smaller gap (mean= 0.264 ±0.106) compared to PMMA (mean= 0.362 ±0.130). Region-specific adaptation: PET-G plates demonstrated better accuracy in all regions (means of anterior =0.246, middle =0.262, posterior =0.282 µm). Significant differences in accuracy were observed in the middle and posterior regions compared to PMMA. Retention assessment revealed that the PET-G groups (with or without adhesive) exhibited significantly higher retention compared to the PMMA groups (P<0.01). CONCLUSION: PET-G plates demonstrated superior accuracy and retention compared to PMMA, with a significant difference observed in both accuracy and retention. Furthermore, the addition of denture adhesive had a positive effect on retention for both materials.

Tissue Engineering Supporting Regenerative Strategies to Enhance Clinical Orthodontics and Dentofacial Orthopaedics: A Scoping, Perspective Review.

The personalized regenerative therapeutic strategies applicable in the structural and functional repair of maxillofacial/dental defects are expected to extend beyond the limits of what is currently possible in the management of dentofacial anomalies and treating malocclusions. The application of undifferentiated stem cells (SCs), including signaling molecule control and individualized tissue engineering based on targeted therapies, has been proposed to overcome therapeutic limitations and complications associated with treatments for craniofacial defects, including severe orthodontic discrepancies. This scoping, prospective review discusses comprehensively the current knowledge and prospects for improving clinical outcomes by the application of novel cell-required and cell-free regenerative strategies in biomedicine. The existing evidence, although scant, suggests that patients receiving an orthodontic treatment could benefit from precise tissue augmentation, allowing enhancement of tooth movement generated by orthognathic forces; faster, more predictable alignment of dental arches; optimal management of periodontal complications; and prevention of external root resorption. Ultimately, enriching orofacial tissues and "customizing" the repair of congenital/acquired defects in the craniofacial region can be vastly enhanced to provide a positive therapeutic outcome and improve patients' quality of life.

The association of polymorphisms in BMP2/MYO1H and skeletal Class II div.1 maxillary and mandibular dimensions. A preliminary 'report.

Introduction: The genetic impact directly or indirectly predefines maxillofacial dimensions, potentially leading to an inappropriate relationship of the jaws and subsequently skeletal malocclusion. Previous studies focused mainly on genetic polymorphisms and class III malocclusion. This study was set out to investigate the association between genetic polymorphisms in two genes BMP2 (rs235768) and MYO1H (rs11066446) with Class II division 1 malocclusion, skeletal variation in vertical plane, and maxillary and mandibular jaws length. Subjects and methods: Sixty patients classified as Skeletal Class I (n = 30) and Class II division 1 (n = 30) were recruited. DNA was extracted from saliva and analyzed by Sanger sequencing. Lateral cephalometric radiographs were measured for the anterio-posterior relationship of maxillary and mandibular arch using digital tracing. Hardy-Weinberg equilibrium analysis of genotype frequencies was performed using Chi-square test to compare genotype distribution among groups and multiple logistic regression analysis adjusted by gender was also performed. Results: The rs235768 polymorphism in BMP2 was associated with hypodivergent face, increased maxillary length, and decreased mandibular length. Meanwhile, the rs11066446 polymorphism in MYO1H was associated with decreased mandibular length. New polymorphism was identified in MYO1H (rs10850090) in association with decreased mandibular length. Conclusion: A potential association between polymorpisms in BMP2 rs235768 and MOY1H rs11066446 and rs10850090 and Class II division 1 skeletal malocclusion related phenotypes exists, however, the degree of it has to be further investigated and yet to be discovered.

Burnout assessment among academic dental staff during COVID-19: Data from Arab countries.

PURPOSE/OBJECTIVE: This study aimed to identify factors that were associated with high burnout and investigate the prevalence of burnout among academic dental staff during the COVID-19 pandemic. METHOD: A cross-sectional online survey was carried out among academic dentists who are working in multiple dental schools in Arab countries. The Copenhagen Burnout Inventory was used to assess participants' work-related burnout. Logistic regression was used to assess the factors that increase the risk of burnout among academic dentists. RESULTS: Of the 254 participants who took part in the study, 141 were males (55.5%). The average age of the participants in the study was 42.1 years (standard deviation = 10.0). The prevalence of burnout among participants was 44.9% (n = 114). Using a fully adjusted logistic regression model, age (odds ratio [OR] = 1.05, 95% confidence interval [CI]: 1.01-1.09, p = 0.008) and gender (OR = 0.54, 95% CI: 0.31-0.94, p = 0.03) were significant variables associated with high overall burnout. Female individuals had a substantially reduced risk of experiencing high personal burnout than male participants (OR = 0.56, 95% CI: 0.32-0.98, p = 0.043) in the personal burnout subdomain. While in the patient's burnout subdomain, age (OR = 1.04, 95% CI: 1.00-1.08, p = 0.048), type of speciality (OR = 2.44, 95% CI: 1.02-5.83, p = 0.044), and teaching place (OR = 2.49, 95% CI: 1.21-5.11, p = 0.013) were associated with higher burnout. CONCLUSION: This study concluded that gender and age are characteristics that increase the risk of higher burnout among academic dentists during the COVID-19 pandemic.

The Perception and Experience of Parents of Children with Cleft Lip and Palate Concerning the Use Pre-Surgical Infant Orthopedics: A Questionnaire-Based Cross-Sectional Survey.

Background: A transitory period prior to the surgical correction of cleft lip and palate (CLP) is associated with adverse impacts, which may require a medical intervention. Pre-surgical infant orthopedics (PSIO) is deemed to reduce the functional and psychological burden, offering a transition until the definite surgical intervention. Aim: To assess the attitude of Iraqi mothers concerning the application and management of pre-surgical orthopedic appliances in children with cleft lip and palate, taking consideration of the mothers' occupational status. Methods: The cross-sectional study was conducted in the College of Dentistry at Baghdad University from 5 January 2020 to 4 December 2021. A questionnaire form was validated based on existing data related to the assessment of parents' satisfaction concerning PSIO. Results: A concern related to the impression procedure was reported by a minority of the participants (6.8%) and it was associated mainly to the perceptions of housewives' vs. working mothers (p < 0.05). The perceived infants' discomfort during the impression procedure reported at 11.9% was significantly associated with housewives' status (p < 0.05). In general, the vast majority of respondents considered the impression as being non-invasive (96.6%). Most mothers found no difficulties in following the instructions of the specialist regarding the insertion of the PSIO and/or taping the elastic bands (62.7%). Respondents believed that CLP infants routinely require PSIO treatment. Interestingly, only a minority of mothers performed an Internet search to look for information about PSIO (7%). The majority indicated the PSIO treatment as beneficial for their infant and a substantial proportion of respondents were satisfied with the outcomes of PSIO, encouraging other parents to consent the PSIO treatment. Conclusion: In general, mothers broadly acknowledged the primary concept of PSIO and accepted the proposed treatment, with a positive attitude towards pre-surgical CLP management, regardless their socio-economic status. They seemed to understand well the expected benefits of PSIO, including feeding improvement, normalization of speech, and optimization of future surgical outcomes.

Effect of mini-implant facilitated micro-osteoperforations on the alignment of mandibular anterior crowding: A randomised controlled clinical trial.

OBJECTIVE: To assess the effects of mini-implant assisted micro-osteoperforations (MI-MOPs) in the alignment of mandibular anterior teeth, and to explore the intervention's associated pain perception (PP) and root resorption (RR) in adults treated by fixed appliance. DESIGN: Multicentre, two-arm and single-blinded randomised clinical trial. SETTING: College of Dentistry, University of Baghdad. PARTICIPANTS: Adolescents (mean age = 18.97 years) undergoing non-extraction orthodontic therapy for the management of mandibular anterior crowding. METHODS: A total of 33 participants (mean age = 18.97 years) undergoing non-extraction orthodontic therapy for the management of moderate mandibular anterior crowding were allocated to the experimental (MI-MOPs, n = 17) or control groups (non-MI-MOPs, n = 16). A series of lower study models were obtained at week 4 (T1), week 8 (T2) and week 12 (T3) in the MI-MOPs group and continued to week 16 (T4) and week 20 (T5) in the non-MI-MOPs group, with all models analysed digitally. Periapical radiographs (PA) were taken before commencing treatment (T0) and T3. Participants were asked to complete a 10-point visual analogue scale (VAS) daily during the first week of treatment. RESULTS: At T0, the mean Little irregularity index (LII) was 5.1 mm (95% confidence interval [CI] = 4.95-5.23) with no statistically significant difference between groups (P = 0.766). At T1, T2 and T3, t-test showed statistically significant differences in the LII (P < 0.05) in favour of the MI-MOPs group; mean differences (MD) were -1.16mm (95% CI = -1.36 to -0.96), -1.77 mm (95% CI = -1.93 to -1.59) and -1.58 mm (95% CI = -1.67 to -1.48), respectively. Mean treatment time from baseline to final alignment was 10.41 weeks (95% CI = 9.92-10.89) in the MI-MOPs group and 16.62 weeks (95% CI = 16.11-17.13) in the non-MI-MOPs groups, which was statistically significant (MD -6.21 mm, 95% CI = -6.88 to -5.53, P < 0.05). Conversely, Mann-Whitney U-test and Wilcoxon signed-rank test showed no significant differences in terms of PP and RR between the groups (P > 0.05). The participants in the MI-MOPs group experienced a higher degree of RR (P < 0.05) secondary to intervention. No other significant adverse events were reported during the trial. CONCLUSION: This trial found that combining MI-MOPs with non-extraction-based fixed orthodontic therapy in adults mildly shortens the duration of the alignment phase. RR should be monitored throughout the treatment when using MI-MOPs (ClinicalTrials.gov NCT04778241).

The relationship between orthodontic treatment and temporomandibular disorders: A dental specialists' perspective.

INTRODUCTION: The relationship between temporomandibular disorders (TMDs) and orthodontic treatment/malocclusion has changed from a cause-and-effect association to an idea without sufficient evidence. OBJECTIVE: This survey was designed to assess the beliefs of different disciplines - orthodontists, oral surgeons, and oral medicine specialists - on the relationship between TMDs and orthodontic treatment, with regard to treatment, prevention and etiology of TMDs. METHOD: A survey in the form of questionnaire was designed and distributed to 180 orthodontists, 193 oral surgeons and 125 oral medicine specialists actively involved in treating TMDs. The questionnaire aimed to collect basic information about each participant and their beliefs, and clinical management of patients with TMDs. RESULTS: Halve of the responding orthodontists and most of the oral surgeons (69.9%) were male participants, whereas the majority of oral medicine specialists (83.3%) were female respondents. The participants' age ranged from 29 to 58 years. The majority of orthodontists believes that there is no relationship between orthodontic treatment and TMDs, and that orthodontic treatment does not provoke TMDs or prevent the onset of the disorder. However, oral surgeons and oral medicine specialists have different and conflicting opinions. Most surgeons tended to treat those patients, while most of the other two disciplines tended to seek an interdisciplinary approach. Chi-square test was done to find an association between the referral status and specialists' experience, and to compare between the different disciplines' belief. CONCLUSIONS: Orthodontist's beliefs were in accordance with the scientific evidence, whereas most oral surgeons and oral medicine specialist believed that orthodontic treatment may provoke TMDs. Therefore, continuing program series development is important to embrace the concept of the multidisciplinary team approach and improve the health care and quality of life for those patients.

The Effect of Vitamin D3 on the Alignment of Mandibular Anterior Teeth: A Randomized Controlled Clinical Trial.

OBJECTIVES: To investigate the effect of vitamin D3 level on the alignment of mandibular anterior teeth in adults and explore the associated root resorption and pain perception. Trial Design. Multicentre, double blinded randomized clinical trial. Subjects and Methods. Adult patients aged 18-30 years, with moderate mandibular incisor crowding [Little's Irregularity index (LII) 3-6 mm], needing nonextraction treatment with fixed orthodontic appliance, were randomly allocated into two groups with 1 : 1 allocation ratio. In the 1st group (normal vitamin D3 level group [ND3G]), vitamin D level was measured and corrected to normal before starting orthodontic treatment, while in the 2nd group [control group (CG)] the vitamin D level was kept unknown until completion of the alignment phase. Outcome measures included mandibular incisor crowding using LII, orthodontically induced root resorption (OIRR), and pain perception. Independent sample t-test was used to compare the duration of treatment, the effectiveness of alignment, and OIRR between groups, while differences in pain perception were analysed by Mann-Whitney U-test (P < 0.05). RESULTS: Out of 87 patients recruited from four centres, 33 patients were randomly allocated into two groups (17 patients to ND3G and 16 patients to CG). Time elapsed for the complete alignment of the mandibular incisor crowding was one month shorter in ND3G (23.532% faster), and the improvement percentage was significantly higher in all periods when compared to the CG. The amount of OIRR was not significantly different between groups; however, pain during the first three days of alignment was significantly less in ND3G. CONCLUSIONS: Having optimal vitamin D3 level reduced the alignment time and pain associated with orthodontic treatment, but it had no role in reducing OIRR. Registration. The trial was registered with ClinicalTrials.gov on 12th April 2021 (registration number: NCT04837781).

Mothers' knowledge and experience concerning presurgical orthopedic management for infants with cleft lip and palate.

OBJECTIVES: The present study aimed to assess the level of mothers' knowledge toward cleft lip and palate and their experience concerning presurgical orthopedic management. MATERIALS AND METHODS: This was a cross-sectional study where the mothers were invited to complete a self-administered validated and reliable questionnaire. The questionnaire included questions that aimed to assess mother's knowledge related to the most prevalent aspects of cleft lip and palate anomaly itself and additionally, questions associated with presurgical orthopedic treatment as an adjunct therapy. Descriptive statistics were used to define the characteristics of the study variables. Chi-square test was utilized to assess relationships between categorical variables. RESULTS: Totally, 145 mothers completed the survey (response rate was 73%). Forty-six (46%) of the mothers provided an incomplete or improper definition of the anomaly and 35 (24%) claimed that they know the cause of the anomaly. The majority of mothers did not identify family history as a risk factor; consanguinity was identified in 29% (n = 42). Of the total, 58 mothers (40%) agreed that dental management of CLP requires teamwork and the majority (n = 126, 87%) recognized the plastic surgeon as the most important specialist. Mothers aged 20-30 years old (n = 42, 53%), and those who are university graduates (n = 38, 48%), as well as employed mothers (n = 52, 66%) have in general a higher degree of knowledge regarding cleft lip and palate (P < 0.001). More than half of the mothers (n = 70, 57%) reported that presurgical orthopedic treatment was useful and needed for their infants. CONCLUSIONS: Most of the mothers reported a high level of knowledge about cleft lip and palate and they experienced the usefulness of the orthopedic appliances for their infants. However, there was uncertainty in some parts such as definition, diagnosis, causes, and risk factors for cleft lip and palate. Therefore, understanding the causes of cleft lip and palate, as well as comprehensive education concerning the essential role of the orthopedic appliances to improve cleft lip and palate are crucial for mothers to improve their infants' quality of life.

Do orthodontists aim to decrease the duration of fixed appliance treatment?

OBJECTIVES: The aim of the present study was to investigate the trends in the use of fixed appliance and accelerated orthodontics to decrease the treatment duration. Further, this study aimed to assess the effect of demographic factors on the participant's choice of treatment modality. METHODS: This was a cross-sectional study in the form of questionnaire-based online survey especially designed and distributed to 265 orthodontists via email. The questions aimed to collect basic information about the participants and respondents' choices for decreasing the treatment duration. The data were analyzed according to gender, level of academic education and years of clinical experience using Chi-square test. RESULTS: A response rate of 85.2% was reported. Most of the orthodontists aimed to reduce the treatment duration by the biomechanical (66.8%) and surgical approaches (27.4%). The use of sliding mechanics (69.4%) and one-step retraction was more common (66.3%). MBT bracket prescription was more prevalent (51.7%), followed by Roth (41.1%). Conventional brackets were used more than self-ligating brackets, and aesthetic brackets were avoided by one third of the respondents. NiTi wires were the most commonly used wires during the alignment stage (44.2%). However, the effect of gender, years of clinical experience and specialty level of education showed some effects on the use of certain techniques and clinical practice of the respondents. CONCLUSIONS: Most of the orthodontists aimed to decrease orthodontic treatment duration by using biomechanical and surgical approaches. Gender and clinical experience to a certain extent affected the participants' choice during orthodontic treatment.

Perception of Iraqi Orthodontists and Patients toward Accelerated Orthodontics.

Background/Purpose. In the literature, no consensus about the duration of orthodontic treatment has been reached out. This study aimed to identify orthodontist's and patient's perception about the time of orthodontic treatment and their willingness to undergo and pay for various acceleration techniques and procedures. Materials and Methods. An electronic survey was conducted from August to October 2020. The questionnaire consisted of 20 multiple choice questions which was designed and emailed to members of the Iraqi Orthodontic Society and self-administered to patients in several orthodontic centers in Baghdad. The questionnaire included questions about the perception toward the duration of orthodontic treatment, approval of different procedures used to reduce treatment time, and how much fee increment they are able to pay for various techniques and appliances. Descriptive and chi-square test statistics were used, and the level of significance was set at p ≤ 0.05. Results. The response rate was 78.7%. The willingness for additional techniques and procedures was rated in the following order: customized appliances: 50.8% orthodontists and 38.4% patients, followed by intraoral vibrating devices: 49.2% orthodontists and 38.1% patients, piezocision: 10.2% orthodontists and 8.2% patients, and corticotomies: 8.1% orthodontists and 5.9% patients. Most orthodontists were willing to pay up to 40% of treatment income for the acceleration procedure, while the payment of patients was up to 20%. Conclusion. Both orthodontists and patients were interested in techniques that can decrease the treatment duration. Noninvasive accelerating procedures were more preferable by orthodontists and patients than invasive surgical procedures.

Retention Protocols and Factors Affecting Retainer Choice among Iraqi Orthodontists.

BACKGROUND: To identify the most common retention protocols practiced by Iraqi orthodontists using a specially designed e-survey. Furthermore, this study aimed to assess the effect of sociodemographic factors on the participant's choice. METHODS: Two hundred and twenty-five questionnaires with 23 multiple choice questions were sent to members of the Iraqi Orthodontic Society. The questionnaire was organized into four sections representing information about sociodemographic status of the orthodontists, factors affecting the selection of the retention system, commonly used retainers in the upper arch and lower arch, and duration of the retention system. The chi-square test was used to test the significant association between different variable and sociodemographic factors. RESULTS: The response rate was 87.5%. The majority of the respondents considered the original malocclusion (80.2%) and clinical experience (49.7%) as the main factors for choosing the retention protocol. In the maxillary arch, a combination of vacuum-formed retainer and fixed retainer (35%) was mostly applied; in the mandibular arch, a fixed retainer was mainly used (46.7%). Most of the respondents recommended initial full-time wearing of a removable appliance (78.2%), especially in the first 3-6 months (47.2%). According to the respondents, bonding a fixed retainer to all anterior teeth was most common (79.7%), fabricated, and adapted directly inside the patient's mouth (75.1%). More than half used flowable composite (54.8%) and recommend leaving the retainer forever (53.8%). Most of the variables showed a statistically significant association between the sociodemographic factors and type, duration, and fabrication of the retainer used. CONCLUSIONS: A combination of removable and fixed retainers was commonly used in orthodontics retention, and sociodemographic factors significantly affected retainer choice.

Expanding the Oro-Dental and Mutational Spectra of Kabuki Syndrome and Expression of KMT2D and KDM6A in Human Tooth Germs.

Kabuki syndrome is a rare genetic disorder characterized by distinct dysmorphic facial features, intellectual disability, and multiple developmental abnormalities. Despite more than 350 documented cases, the oro-dental spectrum associated with kabuki syndrome and expression of KMT2D (histone-lysine N-methyltransferase 2D) or KDM6A (lysine-specific demethylase 6A) genes in tooth development have not been well defined. Here, we report seven unrelated Thai patients with Kabuki syndrome having congenital absence of teeth, malocclusion, high-arched palate, micrognathia, and deviated tooth shape and size. Exome sequencing successfully identified that six patients were heterozygous for mutations in KMT2D, and one in KDM6A. Six were novel mutations, of which five were in KMT2D and one in KDM6A. They were truncating mutations including four frameshift deletions and two nonsense mutations. The predicted non-functional KMT2D and KDM6A proteins are expected to cause disease by haploinsufficiency. Our study expands oro-dental, medical, and mutational spectra associated with Kabuki syndrome. We also demonstrate for the first time that KMT2D and KDM6A are expressed in the dental epithelium of human tooth germs.

Non-syndromic severe hypodontia caused by a novel frameshift insertion mutation in the homeobox of the MSX1 gene.

OBJECTIVE: Inherited congenital anomalies in tooth number, particularly hypodontia are relatively common. Although substantial progress has been made that permits a better understanding of the causes of tooth agenesis, overall knowledge of the phenotype:genotype correlations in this anomaly are still lacking. The aim in this study was to identify the causal gene mutation(s) in a family of two sisters with severe hypodontia (oligodontia) including 2nd premolars and 1st and 3rd molars, using whole exome sequencing (WES). METHODS: WES was performed using in-solution hybridization, followed by massively parallel sequencing. RESULTS: A frameshift insertion of 7 basepairs (GCAAGTT) in the homebox of MSX1 gene located in the exon 2 in heterozygous state has been identified in both sisters (NM_002448:exon2:c.572_573ins GCAAGTT: p.F191fs). CONCLUSION: We conclude that this frameshift mutation in the homeodomain (which plays an essential role in DNA binding) of MSX1 gene is responsible for tooth agenesis in this family. This expands the phenotype-genotype correlation associated with MSX1 mutations.