Risedronate-loaded aerogel scaffolds for bone regeneration.

Sugarcane bagasse-derived nanofibrillated cellulose (NFC), a type of cellulose with a fibrous structure, is potentially used in the pharmaceutical field. Regeneration of this cellulose using a green process offers a more accessible and less ordered cellulose II structure (amorphous cellulose; AmC). Furthermore, the preparation of cross-linked cellulose (NFC/AmC) provides a dual advantage by building a structural block that could exhibit distinct mechanical properties. 3D aerogel scaffolds loaded with risedronate were prepared in our study using NFC or cross-linked cellulose (NFC/AmC), then combined with different concentrations of chitosan. Results proved that the aerogel scaffolds composed of NFC and chitosan had significantly improved the mechanical properties and retarded drug release compared to all other fabricated aerogel scaffolds. The aerogel scaffolds containing the highest concentration of chitosan (SC-T3) attained the highest compressive strength and mean release time values (415 ± 41.80 kPa and 2.61 ± 0.23 h, respectively). Scanning electron microscope images proved the uniform highly porous microstructure of SC-T3 with interconnectedness. All the tested medicated as well as unmedicated aerogel scaffolds had the ability to regenerate bone as assessed using the MG-63 cell line, with the former attaining a higher effect than the latter. However, SC-T3 aerogel scaffolds possessed a lower regenerative effect than those composed of NFC only. This study highlights the promising approach of the use of biopolymers derived from agro-wastes for tissue engineering.

Nanofibrillated cellulose/glucosamine 3D aerogel implants loaded with rosuvastatin and bioactive ceramic for dental socket preservation.

Recycling of agro-wastes presents a great economic and ecologic value. In this study, TEMPO-oxidized nanofibrillated cellulose (TONFC) originating from sugarcane bagasse pulp was exploited in regenerative medicine. TONFC in combination with glucosamine HCl (G) were used to prepare a 3D aerogel implant loaded with rosuvastatin as an integrative approach for extraction-socket healing. Comparing the prepared devices, aerogel composed of TONFC: G (4:1 wt ratio) had the best mechanical properties and integrity. Strontium borate-based bioactive ceramic particles were prepared and characterized for crystal structure, shape, porosity, and zeta potential. The particles had a crystalline diffraction pattern relative to Sr3B2O6, and they were rod in shape with nanopores with a zeta potential value of -16 mV. The prepared bioactive ceramic (BC) was then added in different concentrations (3 or 6% w/w) to the selected aerogel implant. The BC had a concentration-dependent effect on the aerogel properties as it ameliorated its mechanical performance (compressive strength = 90 and 150 kPa for 3 and 6%, respectively) and retarded drug release (mean release time = 2.34 and 3.4 h for 3 and 6%, respectively) (p < 0.05). The microphotograph of the selected aerogel implant loaded with BC showed a rough surface with an interconnective porous structure. During cell biology testing, the selected implant loaded with the lower BC concentration had the highest ability to increase MG-63 cells proliferation. In conclusion, TONFC is a promising material to formulate rosuvastatin-loaded aerogel implant with the aid of glucosamine and bioactive ceramic for dental socket preservation.