RESUMO
Sodium-ion batteries (NaIBs) are increasingly being envisioned for grid-scale energy-storage systems because of cost advantages. However, implementation of this vision has been challenged by the low-energy densities delivered by most NaIB cathodes. Toward addressing this challenge, the authors report the synthesis and characterization of a new iron-doped Na3Fe0.3V1.7O(PO4)2F2 cathode using a novel facile hydrothermal route. The synthesized material was characterized using scanning electron microscopy, X-ray diffraction, and Mössbauer spectroscopy techniques. The obtained discharge capacity in the half-cell configuration lies from 119 to 125 to 130 mA h/g at C/10 while tested using three different electrolyte formulations, dimethyl carbonate-ethylene carbonate (EC)-propylene carbonate (PC), diethyl carbonate-EC, and EC-PC, respectively. The synthesized cathodes were also evaluated in full-cell configurations, which delivered an initial discharge capacity of 80 mA h/g with NaTi2(PO4)3MWCNT as the anode. Ionic diffusivity and interfacial charge transfer kinetics were also evaluated as a function of temperature and sodium concentration, which revealed that electrochemical rate performances in this material were limited by charge-transfer kinetics. To understand the heat generation mechanism of the Na/Na3Fe0.3V1.7O(PO4)2F2 half-cell during charge and discharge processes, an electrochemical isothermal calorimetry measurement was carried out at different current rates for two different temperatures (25 and 45 °C). The results showed that the amount of heat generated was strongly affected by the operating charge/discharge state, C-rate, and temperature. Overall, this work provides a new synthesis route for the development of iron-doped Na3Fe0.3V1.7O(PO4)2F2-based high-performance sodium cathode materials aimed at providing a viable pathway for the development and deployment of large-scale energy-storage based on sodium battery systems.
RESUMO
The electroactive orthophosphate Na2Co2Fe(PO4)3 was synthesized using a solid state reaction. Its crystal structure was solved using the combination of powder X-ray- and neutron-diffraction data. This material crystallizes according to the alluaudite structure (S.G. C2/c). The structure consists of edge sharing [MO6] octahedra (M = Fe, Co) resulting in chains parallel to [-101]. These chains are linked together via the [PO4] tetrahedra to form two distinct tunnels in which sodium cations are located. The electrochemical properties of Na2Co2Fe(PO4)3 were evaluated by galvanostatic charge-discharge cycling. During the first discharge to 0.03 V, Na2Co2Fe(PO4)3 delivers a specific capacity of 604 mA h g(-1). This capacity is equivalent to the reaction of more than seven sodium ions per formula unit. Hence, this is a strong indication of a conversion-type reaction with the formation of metallic Fe and Co. The subsequent charge and discharge involved the reaction of fewer Na ions as expected for a conversion reaction. When discharged to 0.9 V, the material intercalated only one Na(+)-ion leading to the formation of a new phase Na3Co2Fe(PO4)3. This phase could then be cycled reversibly with an average voltage of 3.6 V vs. Na(+)/Na and a capacity of 110 mA h g(-1). This result is in good agreement with the theoretical capacity expected from the extraction/insertion of two sodium atoms in Na3Co2Fe(PO4)3.
