Insight into chitosan/mesoporous silica nanocomposites as eco-friendly adsorbent for enhanced retention of U (VI) and Sr (II) from aqueous solutions and real water.

The chitosan chains were integrated with MCM-48 mesoporous silica in an eco-friendly composite (CH/MCM-48) of enhanced adsorption capacity. The prepared CH/MCM-48 composite was applied in systematic retention of U (VI) as well as Sr (II) ions from water as the commonly detected radioactive pollutants. It displayed promising retention capacities of 261.3 mg/g and 328.6 mg/g for U (VI) and Sr (II) considering the equilibrium time interval that was identified after 420 min. The composite showed the kinetic behavior of the Pseudo-First order model and the isotherm properties of the Langmuir assumption. The thermodynamic assessment of the reactions validated the retention of both U (VI) and Sr (II) ions by spontaneous, favorable, and exothermic reactions. Based on the theoretical values of entropy (-5.94 kJ mol-1 (U (VI)) and -2.93 kJ mol-1 (Sr (II))), Gibbs free energy (less than 20 kJ mol-1), and Gaussian energy (5.77 kJ mol-1 (U (VI)) and 4.56 kJ mol-1 (Sr (II))) the uptake processes are related to physical adsorption reactions. The CH/MCM-48 composite is of significant recyclability and showed considerable affinities for the studied radioactive ions even in the presence of other metal ions (Cd (II), Pb (II), Zn (II), and Co (II)).

Evaluation of different forms of Egyptian diatomite for the removal of ammonium ions from Lake Qarun: A realistic study to avoid eutrophication.

Three types of diatomite-based adsorbents-diatomaceous earth (DE), purified diatomite (PD), and diatomite@MgO/CaO (D@MgO) were used for adsorption decontamination of ammonium from Lake Qarun water (28.7 mg/L). The adsorption properties of the three diatomite-based adsorbents were evaluated by both batch and fixed-bed column adsorption studies. The kinetic results demonstrated removal percentages of 97.2%, 69.5%, and 100% using DE, PD, and D@MgO, respectively, at a 1 g/L adsorbent dosage. The adsorption results using DE and D@MgO showed the best fitness with pseudo-first-order kinetic and Langmuir isotherm models, while the obtained results using PD demonstrate better fitness with the Freunlidich model. The recognised fitting results with the pseudo-first-order model and estimated adsorption energies demonstrated physical uptake of ammonium by DE (5.93 kJ/mol), PD (4.05 kJ/mol), and D@MgO (7.81 kJ/mol). The theoretical maximum ammonium uptake capacity of DE, PD, and D@MgO were 63.16 mg/g, 59.5 mg/g, and 78.3 mg/g, respectively. Using synthetic adsorbents in a fixed-bed column system for treating ammonium ions in Lake Qarun water resulted in removal percentages of 57.4%, 53.3%, and 62.6% using a DE bed, PD bed, and D@MgO bed, respectively, after treating approximately 7.2 L of Lake Qarun water using a bed thickness of 3 cm, a flow rate of 5 mL/min, pH 8, and the determined ammonium concentration in Lake Qarun water (28.7 mg/L). The curves demonstrated breakthrough times of 900 min, 900 min, and 960 min for the DE bed, PD bed, and D@MgO bed, respectively, with 1440 min as the saturation time. The columns' performances also were studied based on the Thomas model, the Adams-Bohart model, and the Yoon-Nelson model.