Capabilities of Grazing Incidence X-ray Diffraction in the Investigation of Amorphous Mixed Oxides with Variable Composition.

X-ray Diffraction has been fully exploited as a probe to investigate crystalline materials. However, very little research has been carried out to unveil its potentialities towards amorphous materials. In this work, we demonstrated the capabilities of Grazing Incidence X-ray Diffraction (GIXRD) as a simple and fast tool to obtain quantitative information about the composition of amorphous mixed oxides. In particular, we evidenced that low angle scattering features, associated with local structure parameters, show a significant trend as a function of the oxide composition. This evolution can be quantified by interpolating GIXRD data with a linear combination of basic analytical functions, making it possible to build up GIXRD peak-sample composition calibration curves. As a case study, the present method was demonstrated on Ta2O5-SiO2 amorphous films deposited by RF-magnetron sputtering. GIXRD results were validated by independent measurement of the oxide composition using Rutherford Backscattering Spectrometry (RBS). These materials are attracting interest in different industrial sectors and, in particular, in photovoltaics as anti-reflection coatings. Eventually, the optical properties measured by spectroscopic ellipsometry were correlated to the chemical composition of the film. The obtained results highlighted not only a correlation between diffraction features and the composition of amorphous films but also revealed a simple and fast strategy to characterize amorphous thin oxides of industrial interest.

Study of the Cross-Influence between III-V and IV Elements Deposited in the Same MOVPE Growth Chamber.

We have deposited Ge, SiGe, SiGeSn, AlAs, GaAs, InGaP and InGaAs based structures in the same metalorganic vapor phase epitaxy (MOVPE) growth chamber, in order to study the effect of the cross influence between groups IV and III-V elements on the growth rate, background doping and morphology. It is shown that by adopting an innovative design of the MOVPE growth chamber and proper growth condition, the IV elements growth rate penalization due to As "carry over" can be eliminated and the background doping level in both IV and III-V semiconductors can be drastically reduced. In the temperature range 748-888 K, Ge and SiGe morphologies do not degrade when the semiconductors are grown in a III-V-contaminated MOVPE growth chamber. Critical morphology aspects have been identified for SiGeSn and III-Vs, when the MOVPE deposition takes place, respectively, in a As or Sn-contaminated MOVPE growth chamber. III-Vs morphologies are influenced by substrate type and orientation. The results are promising in view of the monolithic integration of group-IV with III-V compounds in multi-junction solar cells.

Structure and Stability of a Copper(II) Lactate Complex in Alkaline Solution: a Case Study by Energy-Dispersive X-ray Absorption Spectroscopy.

Energy-dispersive X-ray absorption spectroscopy was applied, aimed at solving the problem of the structure and stability of a copper(II) lactate complex in alkaline solution, used as a precursor for the electrodeposition of Cu2O. The application of multiple scattering calculations to the simulation of the X-ray absorption near-edge structure part of the spectra allowed an accurate resolution of the structure: the copper(II) cation is surrounded by four lactate ions in a distorted tetrahedral environment, with the lactate anions acting as monodentate ligands. This results in an atomic arrangement where copper is surrounded by four oxygen atoms located at quite a short distance (ca. 1.87 Å) and four oxygen atoms located quite far apart (ca. 3.1-3.2 Å). The complex was finally found to be stable in a wide range of applied potentials.

Observation of charge transfer cascades in α-Fe2O3/IrOx photoanodes by operando X-ray absorption spectroscopy.

Electrochemical devices for energy conversion and storage are central for a sustainable economy. The performance of electrodes is driven by charge transfer across different layer materials and an understanding of the mechanistics is pivotal to gain improved efficiency. Here, we directly observe the transfer of photogenerated charge carriers in a photoanode made of hematite (α-Fe2O3) and a hydrous iridium oxide (IrOx) overlayer, which plays a key role in photoelectrochemical water oxidation. Through the use of operando X-ray absorption spectroscopy (XAS), we probe the change in occupancy of the Ir 5d levels during optical band gap excitation of α-Fe2O3. At potentials where no photocurrent is observed, electrons flow from the α-Fe2O3 photoanode to the IrOx overlayer. In contrast, when the composite electrode produces a sustained photocurrent (i.e., 1.4 V vs. RHE), a significant transfer of holes from the illuminated α-Fe2O3 to the IrOx layer is clearly demonstrated. The analysis of the operando XAS spectra further suggests that oxygen evolution actually occurs both at the α-Fe2O3/electrolyte and α-Fe2O3/IrOx interfaces. These findings represent an important outcome for a better understanding of composite photoelectrodes and their use in photoelectrochemical systems, such as hydrogen generation or CO2 reduction from sunlight.

An Efficient CuxO Photocathode for Hydrogen Production at Neutral pH: New Insights from Combined Spectroscopy and Electrochemistry.

Light-driven water splitting is one of the most promising approaches for using solar energy in light of more sustainable development. In this paper, a highly efficient p-type copper(II) oxide photocathode is studied. The material, prepared by thermal treatment of CuI nanoparticles, is initially partially reduced upon working conditions and soon reaches a stable form. Upon visible-light illumination, the material yields a photocurrent of 1.3 mA cm(-2) at a potential of 0.2 V vs a reversible hydrogen electrode at mild pH under illumination by AM 1.5 G and retains 30% of its photoactivity after 6 h. This represents an unprecedented result for a nonprotected Cu oxide photocathode at neutral pH. The photocurrent efficiency as a function of the applied potential was determined using scanning electrochemical microscopy. The material was characterized in terms of photoelectrochemical features; X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, fixed-energy X-ray absorption voltammetry, and extended X-ray absorption fine structure analyses were carried out on pristine and used samples, which were used to explain the photoelectrochemical behavior. The optical features of the oxide are evidenced by direct reflectance spectroscopy and fluorescence spectroscopy, and Mott-Schottky analysis at different pH values explains the exceptional activity at neutral pH.

3D-printed photo-spectroelectrochemical devices for in situ and in operando X-ray absorption spectroscopy investigation.

Three-dimensional printed multi-purpose electrochemical devices for X-ray absorption spectroscopy are presented in this paper. The aim of this work is to show how three-dimensional printing can be a strategy for the creation of electrochemical cells for in situ and in operando experiments by means of synchrotron radiation. As a case study, the description of two cells which have been employed in experiments on photoanodes for photoelectrochemical water splitting are presented. The main advantages of these electrochemical devices are associated with their compactness and with the precision of the three-dimensional printing systems which allows details to be obtained that would otherwise be difficult. Thanks to these systems it was possible to combine synchrotron-based methods with complementary techniques in order to study the mechanism of the photoelectrocatalytic process.

Fixed energy X-ray absorption voltammetry.

In this paper, the fixed energy X-ray absorption voltammetry (FEXRAV) is introduced. FEXRAV represents a novel in situ X-ray absorption technique for fast and easy preliminary characterization of electrode materials and consists of recording the absorption coefficient at a fixed energy while varying at will the electrode potential. The energy is chosen close to an X-ray absorption edge, in order to give the maximum contrast between different oxidation states of an element. It follows that any shift from the original oxidation state determines a variation of the absorption coefficient. Although the information given by FEXRAV obviously does not supply the detailed information of X-ray absorption near edge structure (XANES) or extended X-ray absorption fine structure (EXAFS), it allows to quickly map the oxidation states of the element under consideration within the selected potential windows. This leads to the rapid screening of several systems under different experimental conditions (e.g., nature of the electrolyte, potential window) and is preliminary to more deep X-ray absorption spectroscopy (XAS) characterizations, like XANES or EXAFS. In addition, the time-length of the experiment is much shorter than a series of XAS spectra and opens the door to kinetic analysis.